TRANSCRIPT

Q2 2023 — Transcript

Q2 2023PDF · 24 pages241 KB
Alcoa Corporation
Second Quarter 2023 Earnings Presentation
and Conference Call
Wednesday, July 19, 2023, 5:00 PM Eastern
CORPORATE PARTICIPANTS
Roy Harvey – President and Chief Executive Officer
Molly Beerman – Executive Vice President and Chief Financial Officer
James Dwyer – Vice President, Investor Relations and Pension Investments
OTHER PARTICIPANTS
Alexander Hacking – Analyst, Citi Investment Research
Carlos de Alba – Analyst, Morgan Stanley & Co. LLC
Timna Tanners – Analyst, Wolfe Research LLC
Lucas Pipes – Analyst, B. Riley Securities, Inc.
Christopher LaFemina – Analyst, Jefferies LLC
Michael Dudas – Analyst, Vertical Research Partners LLC
Katja Jancic – Analyst, BMO Capital Markets Corp.
Bill Peterson – Analyst, JPMorgan Securities LLC
John Tumazos – Analyst, John Tumazos Very Independent Research LLC

-- 1 of 24 --

1
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
PRESENTATION
Operator Good afternoon, and welcome to the Alcoa Corporation Second Quarter
2023 Earnings Presentation and Conference Call. All participants will be in
a listen-only mode.
Should you need assistance, please signal a conference specialist by
pressing the star key followed by zero. After today’s presentation, there will
be an opportunity to ask questions. To ask a question, you may press star
then one on your phone. To withdraw your question, please press star then
two. Please note, this event is being recorded.
I would now like to turn the conference over to James Dwyer, Vice
President of Investor Relations. Please go ahead.
James Dwyer Thank you, and good day everyone. I’m joined today by Roy Harvey, Alcoa
Corporation President and Chief Executive Officer, and Molly Beerman,
Executive Vice President and Chief Financial Officer. We will take your
questions after comments by Roy and Molly.
As a reminder, today’s discussion will contain forward looking statements
relating to future events and expectations that are subject to various
assumptions and caveats. Factors that may cause the Company's actual
results to differ materially from these statements are included in today’s
presentation and in our SEC filings.
Roy Harvey Thank you, Jim, and thanks to everyone for joining our call. I’m happy to
be here today with Molly Beerman, our Executive Vice President and Chief
Financial Officer. She’ll soon provide a detailed review of the financial
results, but let’s start first with safety.
We always strive to protect our employees, contractors, and visitors from
injuries. This is the expectation in all of our daily activities, and it is
particularly important when we consider any modifications to our
processes, or when upset conditions occur.
Every quarter, we report during this call any serious incidents that we would
classify as an FSI-A, which stands for “fatal or serious injury, actual.” This
would involve injuries that are life-altering or fatal.
I’m disappointed to report that an employee at our Icelandic smelter lost
partial vision in one eye from an injury that happened when he was
sampling molten metal. We have investigated the incident, and we are
working to prevent it from recurring at any of our locations.
In the second quarter, our overall injury rates continued to decline. We also
are seeing positive trends in leading indicators, showing we’re proactively
identifying and correcting potential risks before they result in injuries. We
are focused on continued improvement. Any injury is unacceptable, and we
expect our teams to be constantly learning and adapting.

-- 2 of 24 --

2
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Now, let me turn to our financial results. We generated slightly higher
sequential revenue in the quarter of $2.68 billion. We increased shipments,
which outweighed lower average realized pricing. Still, as you can see, this
quarter’s challenging market conditions and operational disruptions led to
an EBITDA outcome that demonstrates the need for continued
improvement.
We did pay another quarterly cash dividend and we finished the quarter
with $1 billion in cash. We also continued to strengthen the balance sheet
by reducing risk from pension plans. This was accomplished via another
annuitization – our sixth such transaction. This one was for certain retirees
and beneficiaries in Canada, providing them the same benefits while
removing the liabilities and corresponding assets from our books. No cash
funding was required for this transaction.
Operationally, in the second quarter, we were also pleased to reach a new
labor agreement with the United Steelworkers that covers more than 800
employees at two of our smelters in the United States: Warrick in the State
of Indiana and Massena in the State of New York.
Also, we were pleased to announce in May a major sales contract with
Emirates Global Aluminium to supply smelter grade alumina from Western
Australia. This is an 8-year deal, beginning in 2024, and will represent a
significant portion of our third-party alumina sales. We will be EGA’s largest
third-party supplier, supplementing their own production at their refinery in
Abu Dhabi. We appreciate the confidence that this customer places in us
and the many others we serve.
Before I hand it over to Molly, I’d like to outline our most critical steps to
drive improved performance. Importantly, I am pleased to see improving
stability across our operations. We have a united team focused on taking
action on items most critical to our success. Let me quickly highlight some
areas of attention for us in the coming weeks.
First, we are focused on securing our approvals for bauxite mining in
Western Australia. This is a key priority. In the meantime, we are currently
using bauxite with lower grade, and our global centers of excellence are
working to optimize our refining system to process these lower grades.
Second, we are continuing to implement our plans to drive stability across
our operations. Our third quarter outlook, to be covered in detail by Molly,
shows that operational stability drives financial improvements. Our leaders
are focused on spending even more time on the shop floor, setting clear
stability criteria and moving toward proactive maintenance to prevent
emergency breakdowns. We ended the second quarter with good
improvement and have seen a strong start to the third quarter.
Third, we are watching the ongoing developments in our markets so we
can adapt our programs, product portfolio, and operations to today’s
conditions, but also to emerging demands from our customers. Aluminum
is a critical part of a decarbonized world, and our portfolio of low-carbon,

-- 3 of 24 --

3
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
customer-centric value-add products will help us to continue to be a
supplier of choice.
And finally, we are continuously focused on ensuring that we are operating
our facilities in an optimal fashion, and making decisions that can drive
short-, medium- and long-term profitability across our company and
through the cycles. We continuously review all of our facilities to be sure
we are operating the right portfolio of assets for current and expected
conditions.
With that, I’ll turn it over to Molly to talk about the results, a few key
emerging trends, and our outlook for the third quarter. Molly, please go
ahead.
Molly Beerman Thank you, Roy.
While both alumina and aluminum third party realized prices declined
slightly in the second quarter, revenues increased 1 percent on higher
shipments.
The net loss attributable to Alcoa improved $129 million to $102 million ,
or $0.57 per share, primarily due to the nonrecurrence of charges taken in
the first quarter: the $101 million Intalco smelter closure charge and a $41
million utility settlement charge at Ma’aden.
On an adjusted basis, the net loss was $62 million , or $0.35 per share,
and Adjusted EBITDA excluding special items declined $103 million to
$137 million .
Let’s look more closely at the key drivers of Adjusted EBITDA.
The three largest drivers of the $103 million sequential decline were higher
production costs, lower metal prices and lower volume, which together
totaled $167 million . The Alumina segment was the primary source of the
increased production costs and lower volume with $45 million related to
lower Australia bauxite grades, better than expected as the full impact of
lower grades was not realized in the quarter, and with the remainder due
to higher maintenance outages and related costs at the Alumar and
Wagerup refineries. Production costs in the Aluminum segment were
favorable $14 million , led by improvements at both Norway operations and
Alumar.
The remainder of the bridge factors net to a $64 million improvement.
Highlights here include lower raw materials costs in both segments, as well
as higher API, partially offset by unfavorable product mix, primarily in the
Alumina segment.
Outside the segments, there was a sequential improvement of $41 million
, with Intersegment eliminations providing the lion’s share; a sequential
benefit of $39 million as less profit was held from earnings when
intersegment volumes declined and alumina production costs increased.

-- 4 of 24 --

4
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Transformation costs increased $9 million , coming more in line with
expected levels, and Other corporate spending improved $11 million .
Now let’s turn to other financial metrics and cash flow.
While YTD return on equity is negative 4 percent, we again paid our $0.10
per share dividend in the second quarter, totaling $18 million .
Year to date, free cash flow less net NCI distributions was negative $274
million , of which negative $108 million was in the second quarter, a $58
million sequential improvement. Cash ended the period at $1 billion and
proportional adjusted net debt rose to $1.5 billion .
Year to date, the three largest uses of cash were income taxes, capital
expenditures, and working capital. We expect cash taxes to be a smaller
use of cash in the second half of the year: the $246 million included $173
million of prior period taxes and $73 million of current year taxes. We
expect working capital to continue to improve, as well. Days working
capital decreased one day to 55 days. While working capital was a $216
million use of cash in the first quarter, it was a modest $32 million source
in the second quarter, and we expect it to be a larger source of cash in the
second half of the year.
Let’s take a deeper look at this quarter’s cash flow and working capital.
Similar to the year to date cash flow chart, the sequential quarter chart
shows that cash income taxes and capital expenditures were two large
uses of cash in the quarter. Tax payments are expected to decline in the
third quarter. Of the $155 million of cash taxes, $115 million were for prior
periods, with current period taxes only $40 million , and we expect little or
no payments for prior period taxes in the second half of the year.
Conversely, we expect capital expenditures to remain a significant use of
cash, increasing from $115 million in the second quarter to approximately
$155 million in the third quarter.
As we noted earlier, the working capital change shifted from a use of cash
in the first quarter to a source of cash in the second quarter. Payables have
stabilized, as capital expenditures picked up and offset continued price
declines in purchased raw materials. Accounts receivable declined slightly
in the second quarter and lowered overall working capital. While raw
material inventory values declined notably in the quarter on lower costs,
quantities of in-process and finished goods were up at quarter end, but we
do expect improvement as we move through the year.
Cash flow again was helped by a net noncontrolling interest contribution of
$20 million .
Speaking of inventories and purchase costs.
We continue to see purchase prices for key raw materials decline, and as
noted on the EBITDA bridge, we are starting to see improvements flow
through to the income statement. The three key raw materials are caustic

-- 5 of 24 --

5
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
soda for our Alumina segment, and calcined petroleum coke and coal tar
pitch for our Aluminum segment.
Looking at quarterly average market index prices, all three commodities
declined again in the second quarter. Year over year, we are seeing
approximately 44 percent improvement in caustic prices, approximately 30
percent improvement in quoted prices for coke, and even pitch is down,
albeit very slightly, from year ago levels. We also saw lower spot prices at
quarter end, and expect to see further purchase price improvements.
These purchase price improvements flow into our inventory valuation and
can take one to two quarters before the improvement starts to flow through
COGS and hit the income and cash flow statements. That said, should
these raw material price trends continue, we expect to be rewarded with
lower inventory valuations, lower COGS related to raw materials, and
improved cash flow.
Now let’s turn to our expectations for the year and the third quarter.
Our only change in the full year outlook is to decrease capital expenditures
by a total of $60 million , as some project timelines are extending. Return
seeking capital spending is expected to be approximately $90 million for
the year, and sustaining capital approximately $450 million .
Regarding sequential changes for the third quarter:
In the Alumina segment, we expect an improvement of approximately $65
million due to lower raw material prices, and better production costs and
higher volumes as elevated maintenance during the second quarter
concludes. In addition, we expect a $10 million unfavorable impact from
lower bauxite grades in Australia with impacts now expected to continue
through at least mid 2024. We expect to face the full impact of the lower
grade as higher quality bauxite inventories have now been depleted. That
means an increase from a $45 million impact in the second quarter to $55
million in the third quarter, before identified cost savings initiatives take
affect and reduce this number in future quarters.
In the Aluminum segment, we expect a net improvement of approximately
$25 million on favorable raw materials and lower production costs, partially
offset by unfavorable price/mix, primarily due to softer billet demand.
Finally, we expect alumina costs in the Aluminum segment to be favorable
by $5 million .
Below the EBITDA line:
Other expense in the second quarter included an unusually large favorable
foreign currency impact of $40 million due to recent changes in the value
of the US dollar; this gain may not recur.
Based on recent pricing, the Company expects third quarter operational tax
expense to approximate $10 to $20 million .

-- 6 of 24 --

6
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Now, I will turn it back to Roy.
Roy Harvey Thanks, Molly.
Next, I’d like to provide some updates from our operations across the globe,
beginning with Western Australia.
As I said last quarter, we’re continuing to work with a host of government
agencies on the approvals process for our annual mine plans. Our Mine
Management Programs, or MMPs, are normally approved annually on a
five-year basis. Separately, the Western Australian Environmental
Protection Authority, or EPA, is considering whether to conduct additional
environmental review on these MMPs.
The resolution of our mine approvals does not have a fixed timetable. But
we are working to constructively address stakeholder needs and
expectations in a timely fashion. This is a key priority for our company, and
we’re focused on doing what is necessary to secure approvals.
We are increasing controls to protect drinking water sources, further
stepping up mine site rehabilitation, and enhancing the management of
social impacts.
This requires discussion and action with various government agencies. So,
to give this complex regulatory process appropriate time, we are now
mining lower grade bauxite in previously approved areas.
As Molly just pointed out, using lower grade bauxite has a cost. It means
using more raw materials and producing less alumina per tonne of bauxite.
In the second quarter, this unfavorably impacted Alumina Segment
Adjusted EBITDA by $45 million. This is better than we originally expected
due to slightly higher bauxite grades and good operational practices.
As we look to future quarters, bauxite grades will continue to vary. We
expect that it could take nine to 12 months to transition to new mine areas,
once approved, and improve the bauxite quality sent to our refineries. Thus,
the expected impact of these lower bauxite grades will stretch into at least
mid 2024.
Next, let me provide some more detail on what we’re awaiting from the
EPA. The Authority has indicated it could decide by the end of this month
whether to proceed to the next stage in its consideration process, which
would be a public comment period. If that occurs, the EPA would then
decide whether to conduct additional environmental reviews on all or part
of our MMPs and, if so, at what level.
We support the Authority’s process for future major mine extensions. But
we believe the current statutory process for our MMPs provides appropriate
environmental and social protections in existing mine regions as part of a
transition period. As an example, we’ve already proactively initiated
assessment by the EPA for two future regions: Myara North and Holyoake.

-- 7 of 24 --

7
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Finally, on this issue: I want to stress that I am very proud of how our team
has been operating through different and difficult conditions. We have
some of the world’s most highly skilled people, and we have strong
operating processes. We are working together to operate safely, stably and
efficiently. And we are pooling our collective knowledge to secure our
approvals, and we will strive to reduce the impact of lower grade bauxite in
the coming quarters.
Now, let’s turn to some key operational items across our two segments.
First, in Alumina, some may recall that we had a failure in the first quarter
on a ship-to-shore conveyance system that unloads bauxite for the Alumar
refinery in Brazil. Our teams worked to successfully make repairs and
restore bauxite flows. I was impressed by how our team quickly and safely
recovered.
Then, in June, we proactively began a project to replace a large bearing on
the alumina ship loader at the same location. This four meter bearing
supported the 820 metric tonne structure. With much planning and
coordination, the teams safely executed this major repair in eight days,
working with a specialized contractor. This well-coordinated effort enabled
the loading of alumina ships to quickly resume. We didn’t miss any
customer shipments because of this work. And it demonstrates our push
to move to proactive, rather than reactive, measures to keep our facilities
at peak capacity.
Meanwhile, in Spain, we continue to work to find the optimum production
levels at the San Ciprián refinery, considering market conditions. It is
currently operating at about 50 percent of its capacity. In the second
quarter, a modest increase in production at this facility partially offset some
reduced production at Alumar and in Western Australia, where our Kwinana
refinery is operating four of its five digesters and where we finished a major
maintenance project at Wagerup.
In our Aluminum segment, six of our smelters are operating at full capacity
with high production levels. Meanwhile, the smelters that have reduced
production volume due to partial curtailments – Lista in Norway, Portland
in eastern Australia, and Warrick in the U.S. – are all running stably at those
levels.
Meanwhile, the ongoing restart of the Alumar smelter is progressing with
an intentional and deliberate process to ensure that every pot that restarts
is stable and operating well. We now have greater than 60 percent of that
site’s total capacity operating. And we’re also continuing to invest, per our
agreements, to support the phased restart of the San Ciprián smelter,
beginning next year.
As I said earlier, we are enabling our operational leaders to spend more
time in the field. This will bring an increased focus on safety, more fruitful
dialog and interactions with our employees, and a renewed drive to find
productivity and efficiency improvements.

-- 8 of 24 --

8
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Now, let me provide our current view of the overall market for aluminum
and discuss Alcoa’s position as a producer of choice, both today and in the
future.
The global aluminum market is currently showing some mixed signals, with
limited supply growth and divergent demand trends, depending on specific
end markets. In China, some previously curtailed capacity is restarting in
Yunnan province, but there are questions about hydroelectric power
availability and stability for both Yunnan and Sichuan provinces, where
China’s low-carbon aluminum supply is concentrated. In the rest of the
world, conditions are still not favorable for restarts, and there is very little
new capacity ramping up.
On the demand side, China is expected to see growth this year for
aluminum used in electrical grid investments and vehicle production. The
country’s weaker real estate market, however, has slowed demand for
aluminum in the construction sector.
In the rest of the world, we see strong, year-on-year growth in the
automotive market, particularly in Europe and North America. The same is
true for electrical applications, although construction and packaging have
slowed this year as a knock-on impact from higher interest rates, inflation,
and destocking trends.
The long-term outlook remains positive, as the world will need more
aluminum from both primary and recycled sources for existing uses as well
as global decarbonization efforts, including the transition to renewable
energy, more electric vehicles and recyclable packaging. Recovery is
expected in the construction market long-term as developing markets see
interest rates stabilize with continued urbanization trends.
While more aluminum will be needed, China is still expected to continue to
enforce its 45 million metric tonne per year capacity cap, which it will
approach in the next year or two. Also, China’s existing low-carbon capacity
is likely to face ongoing challenges related to hydroelectric power reliability.
In the rest of the world, we also see limited supply growth, especially in the
production of aluminum made with lower carbon emissions. The
announced projects in the pipeline are not expected to be enough to meet
demand of our critical metal.
Market conditions are expected to be favorable for aluminum in the future,
and Alcoa will also remain well positioned as a low-carbon primary
aluminum producer of choice in key regions. We are a domestic producer
in North America and Europe, which are both deficit regions where
customers prefer domestically and responsibly produced metal.
Now, I’d like to return to an issue that we discussed in prior quarterly
earnings calls – the continued risk for the London Metal Exchange, or LME,
related to Russian-origin aluminum. In the past two years, we’ve seen
customers move away from Russian metal, particularly in Europe and
North America. Also, in Asia, many banks that traders use are not financing

-- 9 of 24 --

9
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Russian metal. Many of these customers in this region are served by these
small, local traders.
The dynamic regarding Russian-origin aluminum should raise alarm, as we
previously stressed at our last earnings call in April. The situation has since
worsened. Russian stocks in LME warehouses recently reached an all-time
high concentration, representing 80 percent of total LME aluminum stocks
as of the end of June.
The physical stocks in LME warehouses are the basis of the published LME
aluminum price, which is widely used as a price reference in global
aluminum contracts. Because those stocks are now predominantly
Russian-origin metal, which is unwanted by much of the world, it is difficult
to have confidence that the LME exchange price matches the true physical
price for non-Russian aluminum that customers largely require.
We have continued to reiterate our position to the LME that it should take
immediate action to delist Russian-origin metal. There’s a real risk here that
if the LME delays acting, a stockpile of metal that is under extremely
punitive tariffs and/or self-sanctioned will continue to build up. That would
then cause this unwanted metal to inappropriately influence the global
benchmark on pricing, damaging the integrity and relevance of the LME’s
aluminum contract.
Returning to Alcoa, we continue to see growing sales in our Sustana
product portfolio, as customers seek metal made with lower carbon
emissions to reach their own sustainability goals. This year, we expect to
see our sales of our EcoLumTM brand to reach 40 percent of our total
European production, which would be a 60 percent annual increase.
We also offer a wide range of value-add aluminum products that serve a
diverse end market, and we have seen the same demand trends that I
discussed earlier play out in our order book. Our participation in a variety
of end markets allows us to benefit from diverging trends as we can flex
our value-add production to adapt to different market conditions across the
various end markets.
Now, let me discuss opportunities for our business. While we are currently
working through challenging market conditions, we look forward to recovery
and the expectation of growth in long-term aluminum demand. And as we
look toward this future, I’d like to stress not only the value of our current
products, such as our Sustana offerings in alumina and aluminum, but the
value that is embedded in Alcoa as a pure play, innovations-focused
aluminum company.
We are well positioned as the world moves to a decarbonized economy.
The future requires more aluminum, which is a material of choice due to its
light weight, recyclability, durability and strength. And with customers
increasingly focused on the need for responsible production, Alcoa is the
company to deliver due to our environmental, social and governance
practices.

-- 10 of 24 --

10
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
We know all metal is not created equally, and our focus on sustainability is
what will differentiate us from other global competitors. That’s why we’re
working so diligently to adapt to increased expectations in Western
Australia, which will allow us to optimize our bauxite mines and return to
higher grade ore as soon as possible. And this focus on community
engagement and responsible practices can also be applied globally across
our mines, refineries, smelters and casthouses. Developing these systems
not only helps us to surmount these immediate challenges, but it will also
provide the roadmap to operating responsibly long into the future.
Meanwhile, we’re focused on finishing some key projects, including
returning the Alumar refinery to normal production after the repair and
maintenance projects I discussed earlier. And our focus on driving simple
yet effective and proactive maintenance programs will ensure we are
operating stably across our portfolio.
We are also continuing to increase production via operational
improvements that allow us to creep our capacity, and we’re investing in
next generation casthouse technology to grow our value-added product
capabilities and capacity.
Two recent examples of this include a new casting line at Deschambault to
cast smaller ingots that will allow the smelter to produce alloys from Alcoa’s
award-winning EZCastTM family. And at our Becancour smelter in Canada,
we’re working to install technology that will improve the surface quality of
slabs, helping customers improve their recovery of finished products. It will
also help us attract new customers, specifically in the packaging and
automotive markets.
For our production levels, I noted earlier that we’re progressing with the
Alumar restart, and we’re investing for the phased restart of the San Ciprián
smelter in Europe, and its 228 thousand metric tonnes of aluminum
capacity, currently idled.
We also have some other curtailed capacity, both in refining and smelting,
and we have options that we’ll continue to evaluate should market factors
and overall economics improve.
Finally, we continue to work on next-generation technologies that have the
potential to further differentiate our products from our competitors. These
three projects – ELYSISTM, our Refinery of the Future initiative, and the
ASTRAEATM scrap purification process – are all part of our technology
roadmap. These remain under development and will help us on our journey
to decarbonize and achieve our net zero 2050 ambition.
As you recall, ELYSIS is a partnership company based on process
innovations that Alcoa first developed at the Alcoa Technical Center
outside of Pittsburgh. The process eliminates all direct greenhouse gas
emissions, replacing those with pure oxygen. ELYSIS is currently working
to ramp up this technology to commercial scale, including the development
of large smelting cells that would operate at 450 kiloamperes at the end of
an existing potline in Quebec. Also, unlike some competing technologies,

-- 11 of 24 --

11
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
the ELYSIS process has already produced commercial-grade aluminum at
research scale and has been used in end products from such brands as
Audi and Apple.
We also know that the final carbon footprint of aluminum is not only
determined by the electrolysis process itself, but also by the energy source
and the alumina that is used to feed those smelting pots. That’s why we’re
also working on the Refinery of the Future, which will help to improve a
refinery’s carbon footprint, reduce water usage and reduce bauxite residue.
This includes electric calcination, mechanical vapor recompression and
other developing technologies.
Meanwhile, we’re also continuing our R&D work on our ASTRAEA
technology, a proprietary scrap purification process that can economically
separate aluminum from other non-ferrous metals and impurities. It could
provide metal of a purity level that would far exceed the quality of what most
commercial smelters can produce.
In closing, we continue the work to optimize our portfolio so we can succeed
regardless of market cycles.
We are focused on continued improvement, and we have a strong balance
sheet, with $1 billion of cash, allowing us to drive improvements during a
challenging market, and to focus on operational excellence.
Our priorities are clear: securing our mine approvals in Western Australia,
driving stability across our operations, adapting to a volatile aluminum
market, and ensuring we operate the right portfolio for today and tomorrow.
Also, we remain a supplier of choice, and we’re proud that customers come
to us for solutions, including our recently announced contract with Emirates
Global Aluminium.
We not only sell low-carbon metal, through our SustanaTM line, but we are
the only producer in the aluminum industry that also markets and sells a
low-carbon alumina brand. These products, which include EcoLum,
EcoDuraTM and EcoSourceTM, can help producers lower their carbon
footprint by switching to our material. EcoLum is our low-carbon aluminum.
EcoDura contains recycled content. And EcoSource is our low-carbon
alumina.
We are encouraged to see demand and sales growth in this brand family,
albeit still a small percentage of our overall sales. Still, the growth
demonstrates the rising demand for low-carbon technologies. This shows
the strong potential and value in the work we’re doing to bring forward our
research and development programs and reinvent the industry we created.
Molly and I are now ready to take your questions. Operator? Who do we
have on the line with our first question today?

-- 12 of 24 --

12
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
QUESTION AND ANSWER SECTION
Operator Thank you. We will now begin the question-and-answer session. To ask a
question, you may press star then one on your phone. If you are using a
speaker phone, please pick up your handset before pressing the keys. To
withdraw your question, please press star, then two. When called upon,
please limit yourself to two questions. We will pause momentarily to
assemble our roster. And our first question comes from Alex Hacking with
Citi. Please go ahead.
Alex Hacking Yeah. Evening, everyone, and thank you for the call. I have a couple of
questions. But, I guess, the first question would be on the environmental
permitting in WA. Maybe I'm misinterpreting your comments, but it seems
like you're a bit more conservative now than on the last call and anticipating
that this process might be a bit more onerous than you previously
anticipated. I mean, is my interpretation fair or is the process going kind of
as you expected?
Roy Harvey Yeah. Alex, I think I wouldn't interpret it as more onerous or really all that
different from what we talked about the last time we went through earnings.
I think we certainly had hoped it would be solved this last quarter. And so,
it is taking longer and we reiterate that the timeline is uncertain. However,
I would continue to say that we're working collaboratively with the
Australian regulators. We did have the Western Australian Environmental
Protection Agency, EPA, say that by the end of this month, they believe
that they'll give a decision about whether the referral is valid. So, we are
progressing. We're not there yet, but we're certainly progressing.
On the other side of that, Alex, I would also say that I think I was pleased
with particularly how our Pinjarra refinery, which is our largest refinery in
the system in Western Australia, was able to perform with the bauxite
grades as they were coming through. And so, that's something where we
can actively work as we go through this period of uncertainty, and as we
start to work towards improved grades in the future, the better and more
efficiently that we can operate that facility and Kwinana as well, which has
the same bauxite source, the less impact that we have both financially and
operationally.
So, really, it's a very similar situation to where we found ourselves last
quarter. It wasn't meant to look more conservative, but rather to say, hey,
this is three months further delayed than what we had seen the last time
we talked.
Alex Hacking Okay. Thanks. That's clear. And I appreciate the clarification. And then, I
guess, on the second question, the smelters where you're operating kind
of at reduced production levels, Lista, Warrick, Portland, I know Warrick
has its own power source, but for Lista and Portland, are you involved in
negotiations for power costs next year? Is there any flexibility there? And if
there isn't flexibility, is there potential that production there could be further
reduced if aluminium prices don't improve? Thank you.
Roy Harvey Yeah. Thanks, Alex. And I think the answer is going to be it varies and it
depends as is always the case. And each facility is a different situation. So,

-- 13 of 24 --

13
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
take Lista as an example. We decided to bring Lista down simply because
spot energy prices had climbed so high, and we were able to find a power
contract that covered part of that facility and that was able to allow us to
drive it back into profitability, which is not an easy thing to do in Europe
right now, given where energy prices stand.
And so, we have the option, of course, to further curtail it as we go into this
next round of power contracts or we also will have the opportunity to bring
it back up again. The European market, of course, is slower than it has
been, but it continues to have strong premiums, and we continue to see a
lot of customer demand, particularly for green and low-carbon aluminum,
which is something that Lista certainly does and also have a very highly
value-added casthouse.
Take Portland sort of as the other side of that. Portland, we really had to
bring back down because of some instability happening in the production
of anodes. So, that's one where we have the power available, we can scale
that back up again, but we're not going to do that until we are certain that
we have stability. And then, of course, we'll make the decision about
whether that's financially viable, whether we consume that energy or we
sell it into the open market.
Warrick is a little bit different, of course, because we do have our own
power source. That's one where we're really trying to work through what
are the strategic plans for that facility, what do we want to do as far as long-
term power source, and how do we make sure that we're operating that
smartly and efficiently. So, that's one really that we have full control,
whether we start back up some of the pots that are idled or what we choose
to do with that going forward.
I'd also remind you we've got the San Ciprián smelter that will start to come
back at the beginning of 2024. Now, that will be relatively modest
production capacity at the beginning, but we do have a commitment by
October of 2025 to have that fully restarted, and it's about 228,000 tonnes.
And I would remind you that is our lowest-cost facility outside of electricity
costs. So, we are working very hard to find a way to get those costs down
as low as we can, including the renewable power contracts that we've
signed starting really as we progress over these next couple of years.
Alex Hacking Okay. Thank you very much.
Roy Harvey Thanks, Alex.
Operator The next question is from Carlos de Alba with Morgan Stanley. Please go
ahead.
Carolos De Alba Yeah. Hello. Good afternoon. Thank you for taking the questions. So, I
wonder if you could, perhaps Molly, quantify the cost savings that you
expect to reach in Alumina from the initiatives that you have identified to
sort of offset or reduce the impact of the lower bauxite that you will be
mining. And in terms of the timing as to when those may kick in, is that
something that you see for the fourth quarter or mostly in the first or second
quarter of next year?

-- 14 of 24 --

14
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Molly Beerman So, Carlos, we've already started to implement some of the savings
initiatives. They didn't amount to a significant amount in the third quarter.
So, that's why we've kept the $55 [million] guide. But you will start to see
changes related to changes in our labor, changes in our maintenance
routine, as well as we're looking at some modest CapEx to improve
operating efficiency. So, those will start to pick up some speed in the fourth
quarter, and then will continue because we are continuing to identify
additional opportunities to get that savings into 2024.
Carlos De Alba All right. Okay. Thanks. And maybe on the products, Roy, on the low-
carbon products that the company offers, EcoLum for instance, and others,
you mentioned that clients are asking for that, and it will represent 50
percent of your aluminium volumes in Europe. Are you being able to
monetize these lower-carbon products, are you getting a premium, and is
there a way you can give us a range of how much this premium represents?
Roy Harvey Yeah. So, let me take a stab at that, and sort of break it into two pieces.
The first is around volumes and continued demand. I have to say, and this
really starts in Europe, and where about 40 percent of our value-added now
is going into these low-carbon products, we're seeing more and more pull.
And you can see this, for example, with some of the automotive customers
where they've set some pretty aggressive targets to be able to drive to net-
zero carbon. But we also see it in, for example, electric cables and in a
number of different places.
And so, I have to say, as we progress and I've probably been asked this
question every single quarter for the last couple of years, I am becoming
more and more optimistic that those volumes are going to continue to
improve. And we're seeing that really take root in Europe and starting to
see that in North America as well. And of course, there is a lot of
connections between our customers in North America and Europe. So, it
tends to spill over. So, certainly seeing good volume improvements, and
particularly going to continue to see those volume improvements because
we've got a lot of ongoing conversations with customers.
On the realizable value, so the important thing here for us is that because
we've, for the most part, turned to renewable energy, a lot of these sales
right now are cost free, right? It's a matter of making sure that we have the
right power source. Of course, there's all the work that goes into being a
responsible producer and making sure that we can line up through the
Aluminium Stewardship Initiative so that we can prove our credentials. But
most importantly, this is essentially driving towards the scarcity or the fact
that there is a differentiated product with less carbon content inside of our
products. And so, it's cost free.
On the premium side, and you can see some of the published indices,
which I think are pretty representative of the kind of premiums that we're
getting, tends to range between $25 and $50 now, which is a beginning. It
is certainly not where we see this continuing to go. And I would also argue,
look at our low-carbon sales, EcoLum is a very good example of that, which
is our low-carbon aluminum. Look at this as sort of the first step to making
sure that our market is prepared for zero-carbon aluminum down the road

-- 15 of 24 --

15
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
for our ELYSIS metal, we want it to be very clear the unique properties, the
unique characteristics and the fact that this will be truly a differentiated
product. And so really, this is sowing the seeds that does create value for
us in the short term, but more importantly will be the seeds that will be
significantly greater value down the road.
Carolos De Alba All right. Excellent. Thank you very much. Good luck.
Roy Harvey Thank you, Carlos.
Operator The next question comes from Timna Tanners with Wolfe Research.
Please go ahead.
Timna Tanners Yeah. Hey. Good evening. Wanted to follow up a little bit on the timeline
for the upstream bauxite inefficiencies that you've laid out. So, on the fact
sheet that you've provided on your website or the Australia website on
environmental assessment, there is a timeline that says the finalization of
the ERD, Environmental Review Document, is Q2-Q3. Is that what you're
talking about that has to get finalized to kick off that nine to 12-month lag
before you get to kind of the optimization of the bauxite mining that you've
anticipated?
Roy Harvey Timna, two different sets of issues, and I can see how it's pretty confusing.
So, that particular timeline refers to this next mine phase, essentially what
we call Myara North and Holyoake, which is the next sort of that big
conveyor move that then gets to this next large field of bauxite. That is a
completely separate process to what we've been talking about as far as the
short-term set of approvals that have been running on a five-year rolling
basis. And so, that runs through this full, look at it as an environmental
impact assessment that's run through the EPA. That represents sort of the
end state of where we're going and what we're trying to build this transition
phase. And so, that is a process that has a clearly set out timeline, but that
timeline can tend to change if they have additional asks as they change
consultation period, et cetera. So, that timeline pertains to that next mine
phase. And that will take considerable time to be able to develop that. So,
that's not a nine to 12 months. That would take a few years in order to
prepare for the conveyor move, et cetera.
The other side of that, our short-term approvals is how do you take what is
sort of this customized approvals process that we run today that was a five-
year rolling process that we submitted every year. How do we then
incorporate a lot of the same types of environmental protections,
community consultations, how do we incorporate that into this current
process, and get to these short-term approvals that then allows us to go
into new mine sites that are part of the existing mine area? And so, does
that answer your question, Timna?
Timna Tanners Yeah. I mean, it sounds like it's a bit apples and oranges or at least two
somewhat separate instances. And you did warn that it's a complicated
regulatory process, so probably not great to spell it all out on the call, but I
appreciate that they're a bit distinctive and we'll wait to get an update on
the more immediate issues.

-- 16 of 24 --

16
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
So, shifting gears, if we could, I did want to also ask you a little bit more
color on the forecast you have for global aluminum and alumina. I know in
last quarter's presentation, you had said that the markets were balanced.
This time, you're saying it's a mixed bag, and we have seen premiums fall.
So, I know the medium and longer term is positive. But just a bit more color
on what you're seeing in the near term would be helpful.
Roy Harvey Yeah. Certainly, Timna. I think mixed bag is probably the right word for it.
So, to go back to your first point, I don't see supply/demand balances being
all that different than last quarter, to be quite honest. We're essentially on
a knife's edge, and it can shift towards a very small surplus, shift towards
a very small deficit. So, in the end, we're really quite balanced both in
alumina and aluminum. And that's sort of where we expect it to be.
What we are seeing, however, though, is that our markets, and particularly
when we look at it, a lot of our sales are happening in North America and
Europe, we're seeing some additional weakness than we did before, and
seeing some strength in things like electrical and transportation. And we
see that particularly outside of China, but also inside of China,
transportation continues to be very strong. And from a weakness
standpoint, really billet which goes into construction, and then slab which
goes into packaging.
And so, you look at it, you've got some areas of strength, you've got some
areas where it really hasn't lived up to the strength and where we're not
seeing those increases year-over-year.
And that sort of combined then with some of the supply issues that have
happened, I know we have some facilities coming back up in Yunnan in
China. That is not a surprise. I think we all knew some of that was going to
come back up again. It doesn't take away some of the uncertainties around
how much hydroelectrical power they're going to be able to generate. It's
not easy to shutter or bring back those facilities. But in the end, it all sort of
comes through this big calculation to get down to essentially a roughly
balanced market. And that balanced market, of course, is waiting for what
happens on inflation, and therefore monetary policy, it connects back with
what's going to happen with the broader economy, whether there will be
Chinese stimulus. And so, I sort of get back to say, hey, it's a mixed bag.
We're sort of more or less where we were at the end of last quarter,
probably a little weaker demand, but also little bit weaker supply as well.
Timna Tanners Thanks. Appreciate the color. Thanks, again.
Roy Harvey Thanks, Timna.
Operator The next question is from Lucas Pipes with B. Riley Securities. Please go
ahead.
Lucas Pipes Thank you very much, operator. Good afternoon, everyone. I first wanted
to ask on the cost side, you called out the $65 million in Alumina, $25 million
in Aluminum with continued raw material savings and with lags, first with
caustic soda, but then also kind of costs working their way through
inventory. Is that an order of magnitude we could expect also for Q4 or

-- 17 of 24 --

17
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
maybe even greater than what you've outlined for Q3? Thank you very
much.
Molly Beerman Lucas, we're actually seeing very notable improvements in the third
quarter. So, within that $65 [million] for Alumina and the $25 [million] for
Aluminum, we've got $20 million related to the caustic improvement, and
then within Aluminum, $30 million related to coke and pitch. As we give an
early look to the fourth quarter, we are seeing notable savings. The trend
is continuing. So, we do see a nice step-down heading into the fourth
quarter.
Roy Harvey Hey, Lucas. I'm going to add one very subjective comment but we've been
waiting for this cost relief to come through for a while, and it's particularly
frustrating on the caustic side, because it takes so long to work its way
through our processes. But now to finally start to see those raw materials
come through in Q3 and beyond is certainly welcome relief and it's very
relevant for Q3.
Lucas Pipes Very helpful. Thank you. Then taking a step back from this and zooming
out a bit. Where do you think you sit today on the global cost curve? And
would you expect maybe a supply response from high-cost producers? You
touched on it here and there throughout the call but would appreciate
maybe honing in on this point. Thank you.
Roy Harvey Yeah. Lucas, I'm not going to be able to give you a particularly educated
view on cost curves just because we tend to do that analysis on an annual
basis and we do it next quarter. So, you're one quarter early. I can give you
some qualitative comments without giving you a quantitative number. I
think through this part of the cycle, what we've been suffering from both on
the Alumina and Aluminum cost curves is the fact that we have our short
energy position sitting inside Europe. And so, when you look at –
fortunately, we had the San Ciprián smelter down. So, that one didn't
impact us so much in this downturn. But the San Ciprián refinery has really
suffered from natural gas prices, and so they have drifted their way up the
cost curve.
Now we'll find a resolution to that, it's a market resolution for the most
part. We've also been managing essentially how much we're choosing to
operate that plant. And I have to tell you that our operators and our
managers there at San Ciprián are masters of making the plant work
really well, no matter what capacity they're running at.
The other side of it is places like Lista, Norway, their cost jumped up
because we used to have some of the least expensive spot energy on the
planet and for a little while, it was some of the most expensive. We've been
able to find a good middle ground, but certainly that's pushing us up the
cost curve when we look at that. And so what we'll try and do when we
come to our cost curve analysis is to talk a little bit about what the
positioning will be, but also what are some of sort of the significant events
that might be causing that cost curve to differ from what should be a longer
term view on where we believe that we sit in more normal condition.

-- 18 of 24 --

18
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Now, your next question is when do normal conditions come back? That's
a really good question. And I'd love to hear someone answer that for me
too. We look out and our job is to make sure that we're managing the
system and our portfolio as smartly as we possibly can. You see that in
how we manage San Ciprián and the refinery. You see that in the way that
we try to look across all of our facilities and make sure that they're creating
value in this quarter and then for the next 10, 12 quarters, right?
So, we're working on that. We have a lot of opportunities to drive that next
class of power contract. We're working with the Spanish government to try
and find relief on natural gas costs. We're also looking for different ways to
bring in other supplies. So, there's a lot that we can do. We are not helpless,
but we will give a lot more insight into cost curves and where we find
ourselves in the next quarter. So, more to come on that one, Lucas.
Lucas Pipes Roy, Really appreciate all the detail. Thanks, again. And best of luck.
Roy Harvey Thanks, Lucas.
Operator The next question is from Chris LaFemina with Jefferies. Please go ahead.
Chris LaFemina Hey, thanks for taking my question. So, I'm just trying to basically frame the
range of possibilities. So, you did $137 million of EBIDTA in the quarter.
And you have the benefit now of raw material prices that are going to start
flowing to the P&L. Some higher volumes as you're restarting some
capacity, eventually, assuming you get the mining licenses in Australia and
you're mining high-grade bauxite again. So those costs come down. If we
ignore the impact of changes in alumina and aluminum prices and all this
stuff goes right for you operationally, what is that quarterly EBITDA number
go to? Does it go from $137 million to $200 million? Does it go to $300
million? Can you give me some sort of ballpark as to where you can be
ignoring any change in alumina or aluminum prices?
Molly Beerman Chris, that's hard to do with the market impacts. I'll take you back to our
guidance. Again, we're focused on the downward trend for raw materials.
We are improving production costs with our improvements in stability.
Getting the higher volumes out is also helping us with our cost absorption.
So, we will stay focused on what we can control.
Chris LaFemina Okay. Thank you.
Operator The next question is from Michael Dudas with Vertical Research. Please
go ahead.
Michael Dudas Good evening, Molly, Roy, Jim.
Roy Harvey Hey, Michael.
Michael Dudas Yeah. I'm not sure when normalization is coming back in the near future,
Roy, so I share your impatience? I want to further discuss on the Russian
metal comment you made. Do you think that the current market is being
restricted from a mechanism on where pricing is today, where ali pricing
should be either better because of what's going on? And is there a real risk

-- 19 of 24 --

19
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
of that happening in the next several weeks to months given the distortions
in LME aluminum and where do you get a sense of where those stockpiles
may be and how it's going to flow through given all the things that you
discussed on that front?
Roy Harvey Yeah, Michael. So, what I would say is that I don't necessarily see pricing
broken right now. And you can essentially chart that back and say how are
aluminum prices, in fact, set? And it's the exchange of warrants on the LME
and that exchange of warrants essentially represents people that are
holding that material and then choosing to either continue to hold it or to
sell it. And so, that changes over on a daily basis. And that changeover
from buyers to sellers is what sets the basis for the entire aluminum market.
Now, as you compare that with what's happening with headlines, what's
happening with supply, demand, et cetera, we continue to see what
appears to be an orderly market. LME metal is meant to be the metal of
last resort. So, if I'm selling metal, I only sell it to the LME because I can't
find another buyer. So, great example is a lot of this Russian metal that
came on warrant, that came into the LME because they couldn't find
another buyer because nobody wanted to buy Russian metal. That's how
that market of last resort works.
On the buyer side, when somebody is going out to look for metal, it's also
the market of last resort. Someone would prefer it, buy it from a producer
because then you are given those tonnes where you choose to buy them
from a particular plant, from a particular producer and you can understand
what the logistics are going to be. Whereas when you're sifting through
warrants, when you're buying from the LME warehouses, you get it where
you get it. You'd get a commodity-grade metal that's located someplace
where LME has warehouses. So, it truly is a tonne of last resort.
Right now, you've got 80 percent of that metal which represents Russian
metal. And so, there's still 20 percent of metal for the most part that's Indian,
that if I wanted to buy metal of last resort, I could buy enough tonnes so
that I could actually get some of that Indian metals coming out and I could
leave the Russian metal sitting inside of the warehouse. And remember
that whoever is holding those warrants will always give you the warrant that
has the least value. They'll give you the Russian metal first. So, let's say,
there's 200,000 tonnes of Russian metal, I need to buy 220,000 tonnes so
I can get 20,000 tonnes out. Again, always representing the purchase of
last resort.
So, right now, you can still put up enough capital to be able to buy those
warrants, to be able to get down to those non-Russian tonnes. But as we
watch this constant march to a higher percentage of aluminum from Russia
sitting in inventory, the potential that even more tonnes could come into the
LME because the customers for the most part are not buying these tonnes
and that's not universal, that is a generalization, particularly for North
American and European consumers.
As you watch that percentage increase and as those tonnes that make up
that percentage also increases, it means to be able to use that market to
actually buy non-Russian tonnes will require more and more and more

-- 20 of 24 --

20
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
capital. So, I'd say, right now, we're not seeing distortions, but the higher
that percentage goes, the more tonnes are sitting on inventory, the more
likely that you could start to see distortions and effectively, you'll have a
bunch of metal that nobody wants sitting inside the LME warehouses. And
so, who is going to be buying and exchanging those warrants if that's not
metal that anybody wants to actually take delivery of?
Now, remember, the other mechanism and I'm not going to get any further
than this. The other mechanism that people are buying and selling those
warrants, because they're essentially establishing the spot price versus the
future contango or the future backwardation. So, the reason there is
another impetus beyond just trying to buy a metal, which is also if I buy it
for $2,500 today, it's worth $2,520 in three days, as an example. And so,
I'm willing to do that because I can then establish a trade.
So, that sort of the nuts and bolts of what's happening in the warehouse.
But as you have less and less people willing to take Russian metal, as you
start to see banks that are not willing to finance that metal and traders that
have said they're not going to be dealing with Russian metal, it increases
the risk of a non-functioning market. So that was a very long answer to a
very short question. Did that help to clarify a little bit?
Michael Dudas It did. It did, Roy. Yes, that's very helpful. Thanks so much and good luck
with that.
Roy Harvey Thank you, Mike.
Operator Your next question is from Katja Jancic with BMO Capital Markets. Please
go ahead.
Katja Jancic Hi. Thank you for taking my question. Maybe going back to more near-term,
pricing has softened and if this soft environment persists, Molly, you
mentioned that you're focusing on what you can control. What are the costs
or what is the magnitude of cost savings you could potentially generate if
this softer pricing environment persists and outside the raw material prices
declining?
Molly Beerman Katja, let me start with we've spent the last several years really improving
the portfolio, strengthening our balance sheet. Right now, we have a lot of
liquidity, excellent, $1 billion in cash. We have a revolver undrawn at $1.25
billion. No long-term debt maturities until 2027. We do have high working
capital now that will generally convert to cash, be a source in declining
markets. So, we will stay focused on operations, we'll adjust our spending
and our operating levels as needed really to safeguard our assets and
protect the long-term value for the shareholders.
Roy Harvey Katja, I'll add one comment on to Molly's as well because she's exactly
right. If prices continue to soften, it drives a review of the portfolio that we're
operating. And so, that's sort of in the aluminum business, we're always
doing portfolio reviews. It seems to be just part and parcel to what our
business looks like. But in the end, we need to make sure that we're running
the portfolio and the set of facilities that can create value in the part of the
cycle that we're in, but also in the future parts of the cycle.

-- 21 of 24 --

21
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
We've, for the most part, walked away from savings that are good today
and bad tomorrow. A lot of times maintenance, you can save money today
and then you end up having failures six months from now. So, we don't
spend a lot of time on short-term savings programs, but we do make sure
that we can operate our plants to their best. And so, when we look at where
our facilities sit, we have a lot of levers that we can pull in order to make
sure that they are working well. We have a lot of times support from national
and local governments. But in the end, as conditions continued to move
forward, we really need to think about how do we make sure that we have
the right portfolio and continue to have the right portfolio.
You've seen this in the decisions that we've made since we've been a
standalone company and really over these last few years, and hopefully,
we've built the analytical models so that we can understand that. We have
a good understanding not just of today's markets, but where those markets
we expect them to go. And so, we tend to make those decisions not just for
the next three months, but for the next 18 months.
Katja Jancic Thank you.
Roy Harvey Thanks, Katja.
Operator The next question is from Bill Peterson with JPMorgan. Please go ahead.
Bill Peterson Yeah. Hi. Good afternoon, and thanks for sneaking me in. My first question
is on CapEx. You discussed deferring some growth and sustaining CapEx.
Can you provide a little bit more color or detail on what type of projects or
regions you're deferring this CapEx?
Molly Beerman So, Bill, this really applies to the whole portfolio of capital projects. So,
typically, as we're running the projects through the year, if we have projects
that have maybe naturally slowed, we might fill the queue, we're just not
doing that. We're going to keep the projects that we had in the plan, on the
timeline, and so we'll just allow the projects to run a bit longer. So, there's
nothing really being deferred. It's just the open projects that we have are
extending.
Bill Peterson Okay. Thanks for that. And maybe, I guess another one on capital
allocation. So, there are no buybacks in the quarter. I guess, how should
we think about capital returns and buybacks in the coming quarters? Are
you looking for improved pricing in the marketplace? More clarity on
operational improvements, working capital improvements, just try to get a
sense of how you're thinking about the returns from here?
Molly Beerman Yeah. So, Bill, our capital allocation framework remains the same. We
position for growth, we manage our portfolio, and then we do returns to
shareholders. And all of those depend on us having excess cash. So right
now, in the operating environment, we're going to stay with our dividend,
it's appropriate for this market cycle. And so, we continue to review this
actively with our Board. But for right now, we have nothing to announce
there.

-- 22 of 24 --

22
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
Bill Peterson Okay. Thanks. I look forward to following the progress.
Roy Harvey Thanks, Bill.
Operator The next question is from John Tumazos with John Tumazos Independent
Research. Please go ahead.
John Tumazos Thank you. I wouldn't expect that you would draw down the revolver,
increase to $1.8 billion of debt, increase to $3 billion of other liabilities to
fund the tough market or the losses. That we have much comfort from $990
million of cash balances. Maybe we improve on the $63 million a month
cash drawdown in the first half. But a year from now, the cash in these
conditions would be less. Should we expect a year from now to look for
asset sales, inventory reductions, stock offerings, plant closures, or how
comfortable are you drawing down the cash to get through each successive
tough month?
Molly Beerman So, John, just as you said, we're not going to leverage up in the near term.
We do believe that we're in a very strong position now with our cash where
it stands. And again, we have a lot of liquidity options should they be
needed. I'm going to take you back to 2020 when we faced the pandemic
and we did put in a very active cash management program. There we were
able to cut CapEx, reduce working capital. We had a very robust program.
And so, if the market turns and goes further down, we will be looking at
those types of programs to reinstitute them.
John Tumazos What's the lowest level of cash balances that you're comfortable with given
the needs to manage raw materials between plants all around the world?
Molly Beerman Yeah, John, we've really not shared our cash levels because they differ
depending on the market cycle, what we're comfortable with and what we're
not. So, we don't kind of set an external target for cash.
John Tumazos Thank you.
Roy Harvey Thanks, John.
Operator The next question is a follow-up from Lucas Pipes with B. Riley Securities.
Please go ahead.
Lucas Pipes Thank you very much for all the time and really helpful discussion. I wanted
to follow up on Michael Dudas' question on the Russian situation. And Roy,
if I understood you correct, in your prepared remarks, you called on LME
to act. And I wondered, do you act in your commercial agreements? Do
you consider something else besides LME as a basis? Appreciate your
thoughts on that. Thank you.
Roy Harvey Yeah, Lucas, it's a good question. I think today there is no good alternative
to the London Metal Exchange. And so what we truly hope is that we can
influence, number one, the LME because we think there’s just no reason
that they can’t make a decision immediately to no longer list Russia as
deliverable metal.

-- 23 of 24 --

23
Alcoa Corporation
Wednesday, July 19, 2023, 5:00 PM Eastern
And also, number two, to work with our host governments and particularly
the European Union and the United States to try and make sure that
Russian metal is sanctioned, which then makes it very easy for the LME to
no longer have that as a listed commodity. So, there's a few routes to get
there. We're not yet at the point where we say, hey, pricing has
fundamentally broken down and we need to find a different pricing
mechanism just because there's just not a lot of really great alternatives
that sit out there.
And so, the market continues to function. We will continue to look at that.
What we're trying to do is prevent the need to try and find a different pricing
mechanism, which then could be more volatile, could require just a bunch
of different changes. So, I think we've got some routes to not have to do
that.
Lucas Pipes I appreciate it. Thanks, again, and again, best of luck.
Roy Harvey Thanks, Lucas.
Operator That being our final question, this concludes our question-and-answer
session. I would like to turn the conference back over to Roy Harvey for
closing remarks.
Roy Harvey Thanks, Gary, and thanks to everyone for joining our call today and also
very much for your continued interest in Alcoa. We're focused very clearly
on driving improvements for the future, and we're focused on a future where
aluminum will continue to be an important metal, an important metal for
decarbonization and important metal for across all the applications as our
economies continue to improve. We've got a lot of advantages built into
Alcoa. We're a pure-play aluminum company, and we have tried to
demonstrate that we take actions so that we can make this company better
each and every day.
I look forward to talking to you again in October, where we'll report our third
quarter results. And in the meantime, please all be safe. Good night,
everyone.
Operator The conference has now concluded. Thank you for attending today's
presentation. You may all now disconnect.

-- 24 of 24 --