TRANSCRIPT

Q1 2024 — Video transcript

Q1 2024PDF · 5 pages202 KB
Public
Transcript
Video interview with ASML CFO Roger Dassen
Q1 2024 results
Q1 results
Mr. Dassen, can you give us a summary of the first quarter?
Net sales for the quarter came in at €5.3 billion, included in there €1.3 billion for Installed Base business.
That €5.3 billion was smack in the middle of the guidance that we provided last quarter. As to gross
margin, that came in at 51%. Better than what we guided. A couple of reasons. First there were some
mixed effects. There was a bit more immersion and EUV in there in comparison to the dry business.
There were also some one-off effects in there that drove up the gross margin to 51%. Net income for
the quarter at €1.2 billion. In terms of order intake, the order intake came in at €3.6 billion, included in
there €656 million for EUV.
There has been quite some speculation around the order intake for ASML. So it's maybe good to make
a few comments on the order intake and also how people might want to look at that on a go-forward
basis. First off, I think it's important to recognize that the order intake over the past six months, so if you
take the Q4 and the Q1 order intake together, you're looking at nearly €13 billion, which is a pretty
significant number.
I think people have recognized by now that the order intake process is typically quite lumpy.
But I think it's good to also look a little bit at what do we need in order to get to the different scenarios
that have been articulated for 2025. So maybe bring back to people's mind. In the Investor Day for 2022,
we were looking at different scenarios for revenue for 2025. There was a bandwidth between €30 and
€40 billion for the 2025 net sales.
If you try to look at it from that vantage point. If you try to look at the backlog that we have today. The
question then is if you want to get, let's say, to the midpoint of that bandwidth that we provided, so the
€35 billion, what do you still need? If you look at what's in the backlog today for 2024, for 2025, beyond
2025, then in the next three quarters we would need a little bit over €4 billion for each of the three
quarters to come in order to, at the beginning of 2025, be fully booked for that midpoint.

-- 1 of 5 --

Public
Q2 and Full Year 2024 outlook
And what's your guidance for the second quarter?
For the second quarter, we guide a net sales level of €5.7 billion to €6.2 billion. Included in there would
be €1.4 billion of Installed Base business. We're looking at a gross margin of between 50 and 51 percent.
Have there been any changes to your outlook for the full year 2024?
Essentially the way we look at 2024 has not changed. As we said last time, we look at 2024 very much
as a transition year. In terms of revenue that means that we would be looking at a revenue for 2024
which is similar to the revenue that we had for 2023. But we're really looking at that as a transition year
in which the momentum is building up during the year. So that means a stronger second half than the
first half. And also really gearing up towards what we think is going to be a strong year of 2025. That is
really backed up by some of the industry trends as we see them today. So we do see the utilization of
our tools, both for Memory customers and for Logic customers, further improving.
We do see that the inventory, particularly downstream inventory, is being navigated quite nicely and is
being driven down to what we would see as normal levels. So all of that is very much in sync with our
expectation that we will see recovery for the industry in 2024 and that we are building up for a stronger
year in 2025. That means for us building a capacity and preparing for that ramp.
And are there any changes to your view on margins for the year?
For 2024 I would say the margin we set a little bit lower than the gross margin that we had in 2023. I
would still look at that similarly. We gave the different puts and takes to the gross margin for this year
on the last quarter. I would still look at that in a similar vein.
Important to recognize still that the gross margin for 2025, which would mean a pretty significant step
up from the gross margin this year, that we still think about that the way we've mentioned that during the
Capital Markets day in 2022. Which is somewhere between 54 and 56 percent. So a big step up. Why
is that? Just reiterating the key points there. First off, the lion's share of our EUV tools, low NA EUV tools
by 2025 will be NXE:3800s. That will come with a better ASP and also a better gross margin. Also on
the Installed Base business, we believe 2025 is going to be a stronger year. First off, because we
continue to improve the gross margin that we have on service for EUV. But also because we believe
that with the recovery in the market as we see it, we believe that the upgrade business in 2025 will be
better than what we've seen so far. High NA, we'll be looking at higher volumes for High NA. So that will
give us better fixed cost coverage for High NA. We also look at the introduction in terms of revenue for
the EXE:5200. Which also will come with a better gross margin profile. Very importantly, we're very much
investing this year in the ramp for the second half. But definitely also for the ramp in 2025. That means

-- 2 of 5 --

Public
that we're already hiring people. Training people in the factory, in the field. The revenue of that and the
benefit of that we will yield particularly in 2025. So in 2025 we will really utilize the higher capacity that
we've been building over the past couple of quarters. All of those factors combined will lead to this step
up in gross margin to the 54% to 56% that we've been indicating in 2022.
EUV update
Let's have a look at EUV. Can you update us on the progress you make with your EUV
technology?
So I would say pretty exciting both for low NA and for High NA. If we look at low NA first off. In Q1 we
shipped the first NXE:3800 low NA machine to a customer for qualification purposes. As we mentioned
before, it's a tool that comes with significant improvements in its specifications. Most notably I would say
on the throughput side, that we will see an increase in throughput from 160 wafers per hour to 220
wafers per hour in final configuration. So that's a 37.5% increase in productivity. So that's a big deal. It
also comes with better overlay. It comes with better imaging. So all in all, clearly a tool that will drive
value for the customer in a big way. It will drive down the cost of ownership for the customers. That also
means that there is quite some customer interest in the tool. So you will also gradually see there that
the second half of this year, but also in next year, that the NXE:3800 will become a more and more
significant part of the EUV sales. With the value that obviously this tool is driving for the customer, also
comes a better ASP for us and also a better gross margin for us. So that's the story I would say on low
NA.
On High NA, big moment obviously that we could report in Q4. That's when we started shipping the first
modules of the High NA tool to its initial customer. So that system we're now in the process of installing.
We actually just very recently also started shipping the second High NA tool to a customer. I think really
good progress on that front. At the SPIE conference in February we could actually report first light. Which
was a big moment for everyone engaged that we were able to report that. We now also see the first
images coming from the High NA tool. So all in all very much on track and good progress.
The industry is really excited around High NA and for very good reasons. Because if you look at the
specifications of the High NA tool, it will provide a transistor density that actually is 3x of the transistor
density that you will have with a low NA tool. So it's a really big step up. If you combine that as we do
with similar productivity on the High NA tool as you have it for low NA tool, it's very clear the value that
it brings to customers. So for customers there's a lot of interest in High NA. As you probably know, we
have this joint ASML-imec High NA lab here in Veldhoven. Where customers are working with the tool.
Next couple of weeks we hope to really see the first wafers being exposed with that tool. That's again a

-- 3 of 5 --

Public
big moment for us because that means that our customers can really experience the tool. Can
understand how they are going to insert that tool into their roadmaps. So big interest from customers in
working with this tool in the lab. Obviously something that is further going to drive up the adoption of
High NA in the production roadmap for our customers.
Dividend and share buyback
Then your capital allocation plans, can you update us on that chapter?
So policy hasn't changed and I start sounding like a broken record here. We first use the cash that is
generated to support the business and then whatever is left will be distributed back to shareholders.
When you talk about what is needed in the business. In the current circumstances that we're looking at
for customers, you really see customers working their way back to profitability. Work their way back to
higher cash levels. In that circumstance, we still support customers just as we did last year. So that is
still going on and on the other hand, as I mentioned we're looking at momentum really being increased
over the quarters to come. Leading up to what we think is going to be a very strong 2025.
That momentum being built up obviously also means that we're currently taking in quite a bit of inventory,
quite a bit of material in order to be able to accommodate that ramp going forward. So that obviously
puts pressure on the free cash flow. It has clearly put pressure on the free cash flow in the first quarter.
Pretty sure that that will yield and that that investment will yield in the period to come. On the dividend
side we paid €1.45 per share in interim dividend in the last quarter. We have proposed a final dividend
of €1.75 to the AGM. If you add it all up, so three times €1.45 plus the €1.75 final, means a total dividend
for 2023 of €6.10 per ordinary share. Finally in terms of share buyback. We've executed share buybacks
in the past quarter of around €400 million.
Longer-term outlook
To close off, what are your expectations on demand and your business beyond 2024?
There are still some uncertainties. I would say primarily macro uncertainties. That's still clearly there. As
I mentioned before, if you look at the trends in the industry, if you look at, and I'm talking about the
cyclicality trends in the industry, so like the utilization going up, inventory downstream being managed
to more normal levels. I think it's pretty clear that the industry is in its upturn and therefore we do believe
that by 2024 we're going to see a recovery. Clearly a recovery of the industry. So then fast forward to
2025. Then what do we find ourselves in? First off, I think we will find ourselves in 2025 in the midst of
the upturn. So that's a positive. Second – and we've talked about that many times – the secular
trends are really strong. If you look at AI, if you look at electrification, if you look at the energy transition.

-- 4 of 5 --

Public
It's all very strong, very positive momentum behind it. So the secular trends are very, very strong. That
is also something that I think will yield in 2025.
Finally, if you just look at all the fab openings that have been indicated by our customers. The recent
news on positive outcomes of CHIPS Act money allocation. All of that is very strong, very supportive for
new fab openings across the globe.
I think by 2025 you will see all three of those coming together. New fab openings, strong secular trends
and the industry in the midst of its upturn. So that's why we're doing what we're doing. Which is really
preparing for that ramp, for that momentum that we see being built up.
That's also the reason why also not just for 2025, but also beyond that, we are having all these building
plans. We are expanding our capacity to the 90 EUV tools of low NA, to the 600 DUV tools and – midterm
– to the 20 High NA tools. So we're building that capacity. Because we believe it's needed. We believe
it's needed for what we think is going to be a very bright future for this industry altogether. For ASML in
particular.
Just comparing notes on that is something that I very much look forward to that. As you know we have
a Capital Markets day planned by November of 2024, the 14th of November. So we look forward to
sharing our view on how the market is going to develop there. Really look forward to seeing all of you
there.

-- 5 of 5 --