TRANSCRIPT

Q2 2026 — Investor call prepared remarks

Q2 2026PDF · 5 pages200 KB
Page 1 of 5
Public
Transcript
Investor Call ASML CEO Christophe Fouquet and CFO Roger Dassen
Q2 2026 results, July 15, 2026
Christophe Fouquet
Thank you Jim. Welcome everyone and thank you for joining us for our second-quarter 2026
results conference call.
Before we begin the Q & A session, Roger and I would like to provide an overview and some
commentary on the second-quarter 2026 results as well as provide some additional comments on
the current business environment and on our future business outlook.
Roger.
Roger Dassen
Thank you Christophe and welcome everyone.
I will first review the second-quarter 2026 financial accomplishments and then provide guidance on
the third-quarter and full year of 2026.
Let me start with our second-quarter accomplishments.
In the second quarter of 2026, total net sales were 9.3 billion euros, which is above the high end of
our guidance as a result of higher than expected Installed Base Management sales.
Net system sales were 6.6 billion euros, which includes 3.8 billion euros from EUV system sales,
including sales of 1 High NA system, and 2.8 billion euros from non-EUV system sales. Net system
sales were almost equally split between Logic at 51 percent and Memory at 49 percent.
Installed Base Management sales for the quarter came in at 2.8 billion euros, almost 300 million
euros above our guidance, a result driven primarily by additional upgrade business.
Gross margin for the quarter was above our guidance at 54.0 percent primarily due to the
contribution of very high margin components within our Installed Base Management business.
Our operating expenses were higher than guided due to the recognition of estimated costs related
to the Technology and IT transformation in Q2, primarily in R&D.
R&D expenses came in at 1.3 billion euros and SG&A expenses came in at around 0.3 billion
euros.
The effective tax rate for Q2 was 17.5 percent. For the full year 2026 the expected annualized
effective tax rate is around 17 percent.
Net income in Q2 was 2.9 billion euros, representing 31.3 percent of total net sales and resulting in
earnings per share of 7.59 euros.
Turning to the balance sheet: We ended the second quarter with cash, cash equivalents and short-
term investments at a level of 7.6 billion euros.
Our free cash flow1 in Q2 was 1.3 billion euros.
1 Free cash flow, which is a non-GAAP measure, is defined as net cash provided by (used in) operating activities minus
purchases of Property, plant and equipment and intangible assets, see US GAAP Consolidated Financial Statements

-- 1 of 5 --

Page 2 of 5
Public
Moving to our cash return to our shareholders: in Q2 ASML paid the final dividend over 2025 of
2.70 euro per ordinary share. Together with the three interim dividends paid in 2025 and 2026, this
resulted in a total dividend for 2025 of 7.50 euro per ordinary share.
In the second quarter, we purchased around 1.1 billion euros worth of shares under the current
2026-2028 share buyback program.
The first quarterly interim dividend over 2026 will be 1.88 euro per ordinary share and will be made
payable on August 5, 2026.
With that I would like to turn to our expectations for the third quarter of 2026.
We expect Q3 total net sales to be between 11.0 billion euros and 12.0 billion euros.
We expect our Q3 Installed Base Management sales to be around 2.9 billion euros.
Gross margin for Q3 is expected to be between 55 and 57 percent.
The expected R&D expenses for Q3 are around 1.2 billion euros and SG&A is expected to be
around 0.4 billion euros.
Driven by continued strong demand, we are updating our full year 2026 guidance. We now expect
total net sales between 43 and 45 billion euros, with a gross margin between 54 percent and 56
percent.
With that I would like to turn the call back over to Christophe.
Christophe Fouquet
Thank you Roger.
I will now provide some additional details on the dynamics that prompted us to raise our guidance
for the full year.
The combination of continued strong momentum in customer demand, and our ability to respond to
that by driving higher output through strength in our supply chain, our manufacturing and our install
teams in the field, are the primary drivers of our improved guidance.
Strong end-market demand this year has motivated our customers to aggressively add capacity on
their leading-edge nodes. A number of our customers have revised their capital expenditure plans
upwards for the year, and our ability to increase output has allowed us to meet their requests for
additional lithography systems.
The dynamics are very similar in both advanced Logic and DRAM, and the plans to build up
capacity are equally aggressive.
Our customers in both segments are entering into long-term agreements with their customers,
providing them with longer-term visibility and the confidence to add significant capacity to support
demand.
In Logic, there is continued investment, not only to enable the expansion of 3nm capacity in
support of the latest generation of AI accelerators, but also at both the 5nm and 4nm nodes, to
support the diverse set of chips required by AI products.
At the same time the 2nm node continues to ramp rapidly to support next-generation HPC and
mobile applications, and our customers are already planning investments to support the
development of the 1.4nm node.

-- 2 of 5 --

Page 3 of 5
Public
These dynamics in the Logic segment are driving both an increase in litho intensity and greater
demand for advanced lithography. We now expect advanced Logic foundry-related net system
sales to grow over 25 percent this year.
In DRAM, the supply challenges driving up both DDR and HBM prices have prompted significant
investments in fab expansion. Our customers are adding meaningful capacity this year, while at the
same time they plan further capacity expansion, as indicated by the plans to build multiple
megafabs. These additions will come online in phases over the coming years.
In addition, DRAM lithography intensity is rising as customers migrate to advanced nodes. This
includes both EUV and DUV immersion, with Low NA EUV growth driven by the increasing
replacement of multi-patterning with more cost-effective single-exposure EUV.
As a result, we anticipate our Memory-related net system sales to grow by over 75 percent this
year.
I will now turn it back over to Roger to provide details on what that means for the different parts of
our business and our plans to support this growing demand.
Roger Dassen
Thanks, Christophe.
Starting first with our EUV business: We now expect to ship around 65 Low NA EUV systems this
year, resulting in year-over-year EUV net system sales growth of over 45 percent. This demand is
being fueled by very strong momentum in both DRAM and advanced Logic.
Moving to the DUV business
For immersion DUV, we expect about 130 shipments this year, which is similar to the output level
of these systems in 2025. This year we have worked closely together with our supply chain
partners to reaccelerate our output of these systems.
Shipments of dry DUV systems have also increased markedly this year. Further, greater process
control intensity at advanced nodes has led to major traction when it comes to adoption of our
optical and e-beam metrology products across all key customers. Given these trends in our DUV
and Metrology and Inspection business, we expect growth in non-EUV net system sales of around
25 percent this year.
Installed Base Management sales are expected to grow over 30 percent this year, driven by
service revenue from our expanding EUV installed base, and customer demand for performance
and productivity upgrades to support their increasing capacity requirements.
Turning now to our China-related business: We continue to expect this to make up around 20
percent of our total net sales for the full year as it increases in line with the overall business, mainly
related to an increased demand in mainstream Logic.
With regards to our capacity plans, we are continuing to have very constructive conversations with
our customers to better understand their demand for our systems beyond 2026.
With increasing visibility into their customers' plans, our customers have been able to share
forecasts with us that extend out multiple years.

-- 3 of 5 --

Page 4 of 5
Public
We see this heightened visibility reflected in order momentum that has remained extremely strong
through the first half of the year. As a result, our backlog continues to increase with a broad mix of
customers.
For 2027, we are now close to being fully covered with orders for Low NA EUV and we are
planning to increase our low NA EUV capacity by around 30 percent.
Looking ahead to 2028, we have already received a significant number of Low NA EUV orders.
Strong demand forecasts from our customers have led us to investigate a further 30 percent
capacity increase for that year.
Similarly, for our immersion systems, we intend to increase capacity by 30 percent in 2027 and are
investigating a potential further 30 percent expansion for 2028.
With that I would like to turn it back over to Christophe.
Christophe Fouquet
Thank you Roger
Turning to our technology roadmap, we see High NA EUV continue to make good progress. We
are continuing to work very closely with our customers to prove the value of High NA technology
for their process technology roadmaps. In parallel, the maturity of the platform is improving towards
the levels required for insertion into high-volume manufacturing.
We were also very pleased to announce in a press release earlier today that Intel Foundry is using
ASML’s High NA EUV technology on the Intel 18A process node to produce a subset of its Intel®
Core™ Ultra Series 3 processors. This milestone marks an important step in demonstrating High
NA EUV readiness in a production environment.
To conclude, customer demand remains very strong, with visibility now extending several years
into the future. We have responded effectively to the increasing demand and will continue investing
to ensure our capacity and capabilities remain aligned with our customers’ needs.
We also see that the rapid growth of AI-related demand in advanced Logic and DRAM is
accelerating the move toward more advanced lithography solutions and increasing lithography
intensity.
At our next Capital Markets Day, which will be held on June 10, 2027, we will update our longer
term views to reflect the market and technology dynamics since our last Capital Markets Day.
I look forward to seeing many of our investors there.
With that we would be happy to take your questions.

-- 4 of 5 --

Page 5 of 5
Public
Forward Looking Statements
This document and related discussions contain statements that are forward-looking within the meaning of the U.S. Private
Securities Litigation Reform Act of 1995, including statements with respect to plans, strategies, expected trends, including
expected trends in the semiconductor industry and end markets, business dynamics and business environment trends, the
expected impact of AI investments and progress in AI technologies on demand for chips and semiconductor growth outlook and
impact on our customers and our business, increasing intensity of lithography, plans and capability to increase capacity and
output and expected capacity, customer plans including with respect to capacity additions, our product portfolio and portfolio
roadmaps, backlog, technological developments expected shipment of systems, supply and demand trends, orders and order
intake and momentum, increased visibility into longer-term demand, gross margin growth plans, outlook including expected
sales of market segments and geographies, outlook and expected financial results including outlook and expected results for Q3
2026, including net sales, IBM sales, gross margin, R&D costs, SG&A costs, outlook and expectations with respect to full year
2026 including expected full year 2026 total net sales, gross margin, annualized effective tax rate and IBM sales, expectations
with respect to EUV, DUV and metrology in 2026, expectations with respect to 2027 and 2028 including expected increase in
wafer capacity of customers and investigation of increasing capability to add wafer capacity and system output capacity,
statements made at our 2024 Investor Day, including investor key messages, our expectation to continue to return significant
amounts of cash to shareholders through growing dividends and share buybacks and statements with respect to dividends,
expected performance and capabilities of our systems and product roadmaps, customer outlook and plans including customer
roadmaps, capital expenditures and capacity expansion plans, ESG strategy and commitments and other non-historical
statements. You can generally identify these statements by the use of words like “may”, “expect”, “will”, “could”, “should”,
“project”, “believe”, “anticipate”, “expect”, “plan”, “estimate”, “forecast”, “guide”, “potential”, “intend”, “continue”, “target”, “future”,
“progress”, “goal”, “model”, “opportunity”, “commitment” and variations of these words or comparable words. These statements
are not historical facts, but rather are based on current expectations, estimates, assumptions, plans and projections about our
business and industry and our future financial results and readers should not place undue reliance on them. Forward-looking
statements do not guarantee future performance and involve a number of substantial known and unknown risks and
uncertainties. These risks and uncertainties include, without limitation, risks relating to customer demand, semiconductor
equipment industry capacity, worldwide demand for semiconductors and semiconductor manufacturing capacity, lithography tool
utilization and semiconductor inventory levels, general trends and consumer confidence in the semiconductor industry, the
impact of general economic conditions, including the impact of the macroeconomic and geopolitical environment on the
semiconductor industry, semiconductor market conditions, the impact of AI on our customers, the pace of customer increase in
capacity, industry and business and semiconductor demand and demand for our tools, the impact of inflation, interest rate and
exchange rate fluctuations, wars and geopolitical developments, the impact of pandemics, the performance of our systems, the
success of technology advances and the pace of new product development and customer acceptance of and demand for new
technologies, products and models and customer roadmaps, our production capacity and ability to adjust capacity to meet
demand, supply chain capacity, timely availability of parts and components, raw materials, critical manufacturing equipment and
qualified employees, our ability to produce systems to meet demand, the number and timing of systems ordered, shipped and
recognized in revenue, risks relating to fluctuations in orders and our ability to convert orders into sales and risks relating to the
realization of our backlog, the risk of order cancellations, delays or push outs and restrictions on shipments of systems,
including ordered systems, under export controls, risks relating to the trade environment, import/export and national security
regulations and orders and their impact on us, including the impact of changes in export regulations and the impact of such
regulations on our ability to obtain necessary licenses and to sell our systems and provide services to certain customers, the
impact of the tariff announcements, changes in tax rates, available liquidity and free cash flow and liquidity requirements, our
ability to refinance our indebtedness, available cash and distributable reserves for, and other factors impacting, dividend
payments and share repurchases, the number of shares that we repurchase under our share repurchase program, our ability to
enforce patents and protect intellectual property rights and the outcome of intellectual property disputes and litigation, our ability
to meet ESG goals and commitments and execute our ESG strategy, other factors that may impact ASML’s business or
financial results, and other risks indicated in the risk factors included in ASML’s Annual Report on Form 20-F for the year ended
December 31, 2025 and other filings with and submissions to the US Securities and Exchange Commission. These forward-
looking statements are made only as of the date of this document. We undertake no obligation to update any forward-looking
statements after the date of this report or to conform such statements to actual results or revised expectations, except as
required by law.

-- 5 of 5 --