ANNUAL REPORT

FY 2025 — Annual report (Form 10-K)

FY 2025PDF · 187 pages2.2 MB
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
(MARK ONE)
☒ 	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF
1934
For the fiscal year ended December 31, 2025
OR
☐ 	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT
OF 1934
For the transition period from 	to
Commission file number 000-30713
Intuitive Surgical, Inc.
(Exact name of Registrant as specified in its Charter)
Delaware 	77-0416458
(State or Other Jurisdiction of Incorporation or Organization) 	(I.R.S. Employer Identification Number)
1020 Kifer Road
Sunnyvale, California 94086
(Address of principal executive offices) (Zip Code)
(408) 523-2100
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class 	Trading Symbol(s) 	Name of each exchange on which registered
Common Stock, par value $0.001 per share 	ISRG 	The Nasdaq Global Select Market
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing
requirements for the past 90 days. Yes ☒ No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of
Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such
files). Yes ☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or
an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth
company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer 	☒ 	Accelerated filer 	☐
Non-accelerated filer 	☐ 	Smaller reporting company 	☐
Emerging growth company 	☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any
new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal
control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared
or issued its audit report. ☒

-- 1 of 187 --

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in
the filing reflect the correction of an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation
received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒
The aggregate market value of the voting and non-voting common equity held by non-affiliates on June 30, 2025, based upon the closing price of
Common Stock on such date as reported on The Nasdaq Global Select Market, was approximately $193.9 billion. Shares of voting stock held by each
officer and director have been excluded in that such persons may be deemed to be affiliates. This assumption regarding affiliate status is not necessarily a
conclusive determination for other purposes.
The number of outstanding shares of the registrant’s common stock as of January 28, 2026, was 355,130,237.
DOCUMENTS INCORPORATED BY REFERENCE
Part III incorporates information by reference to the definitive proxy statement for the Company’s Annual Meeting of Stockholders to be held on or
about April 30, 2026, to be filed within 120 days of the registrant’s fiscal year ended December 31, 2025.

-- 2 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
INDEX
Page No.
PART I
Item 1. 	Business 	6
Item 1A. 	Risk Factors 	27
Item 1B. 	Unresolved Staff Comments 	58
Item 1C. 	Cybersecurity 	58
Item 2. 	Properties 	59
Item 3. 	Legal Proceedings 	59
Item 4. 	Mine Safety Disclosures 	59
PART II
Item 5. 	Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities 	60
Item 6. 	[RESERVED] 	61
Item 7. 	Management’s Discussion and Analysis of Financial Condition and Results of Operations 	62
Item 7A. 	Quantitative and Qualitative Disclosures About Market Risk 	86
Item 8. 	Financial Statements and Supplementary Data 	87
Item 9. 	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 	124
Item 9A. 	Controls and Procedures 	124
Item 9B. 	Other Information 	125
Item 9C. 	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 	125
PART III
Item 10. 	Directors, Executive Officers, and Corporate Governance 	126
Item 11. 	Executive Compensation 	126
Item 12. 	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 	126
Item 13. 	Certain Relationships and Related Transactions and Director Independence 	126
Item 14. 	Principal Accountant Fees and Services 	126
PART IV
Item 15. 	Exhibits and Financial Statement Schedules 	127
Item 16. 	Form 10-K Summary 	128
SIGNATURES 	129
2

-- 3 of 187 --

Table of Contents
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the
Securities Exchange Act of 1934, as amended. Forward-looking statements relate to expectations concerning matters that are not historical facts.
Statements using words such as “estimates,” “projects,” “believes,” “anticipates,” “plans,” “expects,” “intends,” “may,” “will,” “could,” “commit,”
“ensure,” “promote,” “should,” “would,” “goals,” “seek,” “potential,” “targeted,” and similar words and expressions are intended to identify forward-
looking statements. These forward-looking statements include, but are not limited to, statements related to future results of operations, future financial
condition, our financing plans and future capital requirements, our potential tax assets or liabilities, and statements based on current expectations, estimates,
forecasts, and projections about the economies and geographic markets in which we operate and our beliefs and assumptions regarding these economies
and markets. These forward-looking statements are necessarily estimates reflecting the judgment of our management and involve a number of risks and
uncertainties that could cause actual results to differ materially from those suggested by the forward-looking statements. These forward-looking statements
should be considered in light of various important factors, including, but not limited to, the following: the overall macroeconomic environment, which may
impact customer spending and our costs, including tariffs, the levels of inflation, and interest rates; the conflict between Ukraine and Russia; conflicts in the
Middle East; disruption to our supply chain, including difficulties in obtaining a sufficient supply of materials; curtailed or delayed capital spending by
hospitals; the impact of global and regional economic and credit market conditions on healthcare spending; delays in obtaining new product approvals,
clearances, or certifications from the U.S. Food and Drug Administration (“FDA”), comparable regulatory authorities, or notified bodies; the risk of our
inability to comply with complex FDA and other regulations, which may result in significant enforcement actions; regulatory approvals, clearances,
certifications, and restrictions or any dispute that may occur with any regulatory body; healthcare reform legislation in the U.S. and its impact on hospital
spending, reimbursement, and fees levied on certain medical device revenues; changes in hospital admissions and actions by payers to limit or manage
surgical procedures; the timing and success of product development and customer acceptance of developed products; the results of any collaborations, in-
licensing arrangements, joint ventures, strategic alliances, or partnerships, including the joint venture with Shanghai Fosun Pharmaceutical (Group) Co.,
Ltd.; our completion of and ability to successfully integrate acquisitions; intellectual property positions and litigation; risks associated with our operations
and any expansion outside of the U.S.; unanticipated manufacturing disruptions or the inability to meet demand for products; our reliance on sole- and
single-sourced suppliers; the results of legal proceedings to which we are or may become a party; adverse publicity regarding us and the safety of our
products and adequacy of training; the impact of changes to tax legislation, guidance, and interpretations; changes in tariffs, trade barriers, and regulatory
requirements (including changes to tariffs imposed by the U.S. on imports from various countries, including Mexico, where we currently manufacture a
significant majority of our instruments and accessories, Germany, where we currently manufacture a majority of our endoscopes, and China, where we
currently import certain materials); and other risks and uncertainties, including those listed under the caption “Risk Factors.” Readers are cautioned not to
place undue reliance on these forward-looking statements, which speak only as of the date of this report and which are based on current expectations and
are subject to risks, uncertainties, and assumptions that are difficult to predict. Our actual results may differ materially and adversely from those expressed
in any forward-looking statement, and we undertake no obligation to publicly update or release any revisions to these forward-looking statements, except as
required by law. Additional risks are described throughout this report, particularly in Part I, “Item 1A. Risk Factors,” and include, but are not limited to,
those summarized on the following pages.
3

-- 4 of 187 --

Table of Contents
RISKS RELATING TO OUR BUSINESS
• Our commercial landscape is highly competitive, and customers may choose our competitors’ products or services or may not accept robotic-
assisted medical procedures, which could result in reduced revenue and loss of customers.
• We are subject to a variety of risks due to our operations outside of the U.S.
• We are subject to litigation, investigations, and other legal proceedings relating to our products, customers, competitors, and government
regulators that may adversely affect our business, financial condition, or results of operations.
• We offer usage-based arrangements, including alternative capital acquisition approaches; as a result, we are exposed to an increased risk of losses
of revenue and increased credit risk, which could adversely affect our business, financial condition, or results of operations.
• Our reliance on sole- and single-sourced suppliers and ability to purchase at acceptable prices a sufficient supply of materials could harm our
ability to meet product demand in a timely manner or within budget.
• New product developments and introductions may adversely affect our business, financial condition, or results of operations.
• We may encounter manufacturing problems or delays that could result in lost revenue.
• We expect gross profit margins to vary over time, and changes in our gross profit margins could adversely affect our business, financial condition,
or results of operations.
• Macroeconomic conditions could materially adversely affect our business, financial condition, or results of operations.
• Information technology system failures, cyberattacks, or deficiencies in our cybersecurity could harm our business, customer relations, financial
condition, or results of operations.
• If our products do not achieve and maintain customer acceptance, we will not be able to generate the revenue necessary to support our business.
• If hospitals are unable to obtain coverage and reimbursement for procedures using our products, if reimbursement is insufficient to cover the costs
of purchasing our products, or if limitations are imposed by governments on the amount hospitals can charge for certain procedures, we may be
unable to generate sufficient sales to support our business.
• If our products contain defects or encounter performance problems, we may have to recall our products and our reputation may suffer.
• We utilize distributors for a portion of our sales and service of our products in certain countries, which subjects us to a number of risks that could
harm our business, financial condition, or results of operations.
• The failure to attract and retain key personnel could harm our ability to compete, and changes in our existing labor relationships could materially
adversely impact our business, financial condition, or results of operations.
• Incorporating artificial intelligence technologies into our products, services, and operations may result in legal and regulatory risks or have other
adverse consequences to our business, financial condition, or results of operations.
• Negative publicity, whether accurate or inaccurate, concerning our products or our company could reduce acceptance of our products and could
result in decreased product demand and reduced revenues.
• We could be subject to significant, uninsured losses, which may have a material adverse impact on our business, financial condition, or results of
operations.
• We experience long and variable contracting cycles and seasonality in our business, which may cause fluctuations in our financial results.
• Third parties may offer to sell remanufactured or unauthorized instruments and accessories to our customers or provide unauthorized service on
our systems, which could adversely impact safety, our financial results, and our reputation.
• Our business is subject to complex and evolving laws and regulations regarding data privacy, data protection, artificial intelligence, and
responsible use of data, and any failure to comply may result in significant liability, negative publicity, and/or erosion of trust, which may
adversely affect our business, financial condition, or results of operations.
• Ongoing and future global conflicts could adversely affect our business, financial condition, or results of operations.
• Disruptions at the FDA and other government agencies or notified bodies could prevent our products from being cleared, certified, approved, or
commercialized in a timely manner or at all, or could hinder their ability to procure our products, which may adversely affect our business,
financial condition, or results of operations.
• Public health crises or epidemic diseases, or the perception of their effects, could materially adversely affect our business, financial condition, or
results of operations.
• If we do not successfully manage our collaboration, licensing, joint venture, strategic alliance, or partnership arrangements with third parties, we
may not realize the expected benefits from such arrangements, which may have a
4

-- 5 of 187 --

Table of Contents
material adverse effect on our business, financial condition, or results of operations.
• If we fail to successfully acquire or integrate new businesses, products, and technology, we may not realize expected benefits, or our business may
be harmed.
• We are exposed to credit risk and fluctuations in the market value of our investments.
• Changes in tax laws or exposure to additional tax liabilities may adversely affect our business, financial condition, or results of operations.
• We are subject to risks associated with real estate construction and development.
• Climate change, natural disasters, or other events beyond our control could disrupt our business, financial condition, or results of operations.
• Consolidation in the healthcare industry could have an adverse effect on our business, financial condition, or results of operations.
• We use estimates, make judgments, and apply certain methods in determining our financial results and in measuring the progress of our business.
As these estimates, judgments, and methods change, our results of operations and our assessment of the progress of our business could vary.
RISKS RELATING TO OUR REGULATORY ENVIRONMENT
• Complying with FDA and foreign regulations is a complex process, and our failure to fully comply could subject us to significant enforcement
actions.
• Our products are subject to a lengthy and uncertain domestic regulatory review process. If we do not obtain and maintain the necessary domestic
regulatory authorizations, we will not be able to sell our products in the U.S.
• Our products may cause or contribute to adverse medical events or be subject to failures or malfunctions that we are required to report to the FDA
and foreign regulatory authorities and, if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial
condition, or results of operations.
• If our manufacturing facilities do not continue to meet federal, state, or other manufacturing regulations and standards, we may be required to
temporarily cease all or part of our manufacturing operations, import/export of our products, and/or recall some products, which could result in
significant product delivery delays and lost revenue.
• Our products are subject to international regulatory processes and approval or certification requirements. If we do not obtain and maintain the
necessary regulatory requirements, we will not be able to sell our products in other countries.
• Changes in healthcare legislation and policy may have an adverse effect on our business, financial condition, or results of operations.
• We are subject to federal, state, and foreign laws governing our business practices, which, if violated, could result in substantial penalties.
Additionally, challenges to, or investigation into, our practices could cause adverse publicity and be costly to respond to and, thus, could harm our
business, financial condition, or results of operations.
• If hospitals and other surgical facilities do not continue to meet federal, state, or other regulatory standards, they may be required to temporarily
cease all or part of their system utilization.
RISKS RELATING TO OUR INTELLECTUAL PROPERTY
• If we are unable to fully protect and successfully defend our intellectual property from use by third parties, our ability to compete may be harmed.
• Others may be successful in asserting that our products infringe their intellectual property rights, which may cause us to pay substantial damages
and/or enjoin us from commercializing our products.
• Our products may rely on licenses from third parties, which may not be available to us on commercially reasonable terms or at all. If we lose
access to these technologies, our revenues could decline.
GENERAL RISK FACTORS
• Our future operating results may be below expectations, which could cause our stock price to decline.
• Our stock price has been, and will likely continue to be, volatile.
• Changes to financial accounting standards may affect our reported results of operations.
The summary of material risk factors described above should be read together with the text of the full risk factors below in the section entitled “Item 1A.
Risk Factors” and the other information set forth in this Annual Report on Form 10-K, including our Consolidated Financial Statements and the related
notes, as well as other documents that we file with the U.S. Securities and Exchange Commission. The risks summarized above or described in full below
are not the only risks that we face. Additional risks and uncertainties not precisely known to us or that we currently deem to be immaterial may also
materially adversely affect our business, financial condition, or results of operations.
5

-- 6 of 187 --

Table of Contents
PART I
ITEM 1. BUSINESS
In this report, “Intuitive Surgical,” “Intuitive,” the “Company,” “we,” “us,” and “our” refer to Intuitive Surgical, Inc. and its wholly and majority-
owned subsidiaries. Product and brand names and logos, including Intuitive, da Vinci, and Ion, are trademarks or registered trademarks of Intuitive
Surgical, Inc. or one of its subsidiaries or of their respective owners. Additional information about our trademarks can be found on our website at
www.intuitive.com/trademarks. Although we reference our trademarks located on our website, this list of trademarks and any other materials on our
corporate website are not incorporated by reference into this Form 10-K or any of our other filings under the Securities Act of 1933, as amended, or the
Exchange Act.
Company Background
As part of Intuitive’s mission, we believe that minimally invasive care is life-enhancing care. By combining ingenuity and intelligent technology, we
expand the potential of physicians to heal without constraints. We envision a future of care that is less invasive and profoundly better, where diseases are
identified early and treated quickly so patients can get back to what matters most.
Since our founding over 30 years ago, we have been delivering on this mission and vision by combining innovative technology with clinical expertise
to advance minimally invasive care. We do so by providing a comprehensive ecosystem that includes robotic-assisted systems, instruments and accessories,
customer learning, and customer support services all connected by a digital portfolio that enables actionable insights across the care continuum. Among
other capabilities, these products and services can augment the skills and improve the efficiency of clinicians and care teams while providing decision
support and learning that can help deliver differentiated clinical and economic value for patients, providers, and payers when compared to the next best
available treatment options.
To assure continued alignment with the patients and healthcare community we serve, we have adopted the Quintuple Aim as our “north star.” Starting
with a focus on patients, we seek to demonstrate that our products can deliver better outcomes that are validated by rigorous, independent, and peer-
reviewed evidence. Second, we aim to create better patient experiences that enable patients to get back to what matters most in their lives more quickly,
with fewer complications, less pain and discomfort, and greater predictability. Third, we aim to enable the care teams who use our platforms and
technology-enabled ecosystem to have better experiences that augment their skills while reducing fatigue and increasing efficiency and reliability. Fourth,
we aim to help lower the total cost of care per patient episode when compared with existing treatment alternatives, providing a return on investment for
hospitals and healthcare systems and value for payers. Lastly, we aim to expand access to high-quality minimally invasive care by working together with
hospitals, healthcare systems, patient advocacy groups, and other stakeholders to address barriers to care.
While surgery and acute interventions have improved significantly in the past few decades, there remains a significant need for improvement across all
aspects of the Quintuple Aim. Healthcare payers and providers continue to expect better clinical outcomes and decreased variability of outcomes across
clinicians and care teams. Globally, some healthcare systems continue to be stressed and lacking in critical resources, including the professionals who staff
care teams. At the same time, healthcare providers, payers, and governments strain to cover the healthcare needs of their populations and demand lower
total cost per patient to treat disease. In the face of these challenges, we believe that we are well-positioned to synthesize scientific and technological
advances in biology, computing, imaging, algorithms, and robotics to deliver meaningful and measurable value to all of our stakeholders.
Products
Systems
Our robotic-assisted platforms extend the care teams’ capabilities to deliver minimally invasive care. These platforms include da Vinci surgical
systems, which are designed to enable a wide range of surgical procedures across a broad patient population using a minimally invasive approach, and the
Ion endoluminal system, which extends our commercial offerings beyond surgery into diagnostic procedures, enabling minimally invasive biopsies in the
lung.
Da Vinci Surgical Systems
Intuitive launched its first da Vinci surgical system in 1999, with the goals of enhancing surgical capabilities and facilitating less invasive care through
improved precision, vision, and control. In 2000, the FDA cleared da Vinci for use in general laparoscopic surgery. Since then, we have received numerous
additional indications in the U.S. and in countries around the world, for a broad array of procedures across general surgery, urologic, gynecologic,
cardiothoracic, and head and neck specialties, among others. Refer to the section titled “Regulatory Activities” in our Management’s Discussion and
Analysis of Financial Condition and Results of Operations for more recent regulatory clearances, approvals, and certification.
6

-- 7 of 187 --

Table of Contents
There are several models of the da Vinci surgical system currently in use by our customers globally; these include our recently released fifth-generation
da Vinci 5 surgical system, our fourth-generation da Vinci X, da Vinci Xi, and da Vinci SP surgical systems, and our third-generation da Vinci Si surgical
system.
Our recently released da Vinci 5 surgical system builds on da Vinci Xi’s highly functional design, featuring force feedback technology and instruments
that enable surgeons to sense and measure the force exerted on tissue during surgery. It also includes new surgeon controllers, powerful vibration and
tremor controls, a next-generation 3D display and image system, and throughput and workflow enhancements, such as an integrated electrosurgical unit
and insufflation capabilities technology. Da Vinci 5 has more than 10,000 times the computing power of da Vinci Xi, allowing for innovative new system
capabilities and advanced digital experiences, including integration with our My Intuitive app, SimNow (virtual reality simulator), Case Insights
(computational observer), and Intuitive Hub (edge computing system). Additionally, the redesigned console provides greater surgeon comfort with
customizable positioning, allowing surgeons to find their best fit for surgical viewing and comfort, including the ability to sit completely upright.
Our da Vinci surgical systems are comprised of the following components:
Surgeon Console. The da Vinci surgical system allows surgeons to operate while comfortably seated at an ergonomic console viewing a three-
dimensional, high definition (“3DHD”) image of the surgical field. The surgeon’s fingers grasp instrument controls below the display with the
surgeon’s hands naturally positioned relative to his or her eyes. Using electronic hardware, software, algorithms, and mechanics, our technology
translates the surgeon’s hand movements into precise and corresponding real-time micro movements of the da Vinci instruments positioned inside the
patient.
On most of our current systems (da Vinci 5, da Vinci X, da Vinci Xi, da Vinci SP, and da Vinci Si), a second surgeon console may be used in two ways:
to provide assistance to the primary surgeon during surgery or to act as an active learning aid during surgeon-proctor training sessions. With the da
Vinci 5, da Vinci X, da Vinci Xi, da Vinci SP, and da Vinci Si, a surgeon sitting at a second console can view the same surgery as the primary surgeon
and can be passed control of some or all of the da Vinci instruments during the surgery. In addition, surgeons can control 3D virtual pointers to better
facilitate training and other care team interactions. The da Vinci surgical system is designed to allow surgeons to operate while seated, which may be
clinically advantageous because of reduced surgeon fatigue. The da Vinci surgical system’s design provides natural hand-eye alignment at the surgeon
console. Because the da Vinci surgical system’s robotic arms hold the camera and instruments steady, there is less surgeon and assistant fatigue and
enhanced control by the surgeon.
Patient-Side Cart. The patient-side cart holds electromechanical arms that translate the motion of the surgeon’s hand to manipulate the instruments
inside the patient. For our da Vinci 5, da Vinci X, da Vinci Xi, and da Vinci Si surgical systems, up to four arms attached to the cart can be positioned,
as appropriate, and then locked into place. At least two arms hold surgical instruments, one representing the surgeon’s left hand and one representing
the surgeon’s right hand. A third arm positions the endoscope, allowing the surgeon to easily move, zoom, and rotate the field of vision. A fourth
instrument arm extends surgical capabilities by enabling the surgeon to add a third instrument to perform additional tasks. Our da Vinci single-port
(“SP”) surgical system is designed for single-incision or natural orifice surgery. A single arm delivers three multi-jointed instruments and a fully
articulating 3DHD endoscope for visibility and control in narrow surgical spaces. The instruments and the camera all emerge through a single cannula
and are triangulated around the target anatomy to avoid external instrument collisions that can occur in narrow surgical workspaces.
3DHD Vision System. Our vision system includes a 3DHD endoscope with two independent vision channels linked to two separate color monitors
through sophisticated image processing electronics and software. The resulting 3DHD image has high resolution, high contrast, low flicker, and low
cross fading. A digital zoom feature in the 3DHD vision system allows surgeons to magnify the surgical field of view without adjusting the endoscope
position, reducing interference between the endoscope and instruments. The 3DHD vision system is a standard, integrated feature on all of our surgical
systems.
Firefly Fluorescence Imaging (“Firefly”). This imaging capability combines an injectable fluorescent dye with a specialized da Vinci camera head,
endoscope, and laser-based illuminator to allow surgeons to identify vasculature, tissue perfusion, or biliary ducts in three dimensions beneath tissue
surfaces in real-time. The most common procedural categories for the use of Firefly are urology, gynecology, and general surgery. Firefly is a standard
feature of the da Vinci 5, da Vinci X, da Vinci Xi, and da Vinci SP surgical systems.
Da Vinci Integrated Table Motion. Integrated Table Motion coordinates the movements of the da Vinci robotic arms with an advanced operating room
(“OR”) table, the TS 7000dV OR Table sold by Hillrom (now a part of Baxter International Inc.). This gives OR teams the capability to dynamically
change the positioning of the operating table during da Vinci surgical system procedures to manage the patient’s position in real-time while the da
Vinci robotic arms remain docked. This enables surgeons to extend reach, facilitate access, and choose the angle of approach to target anatomy, as well
as reposition the table during the procedure to enhance anesthesiologists’ management of the patient. Integrated Table Motion is a standard feature for
da Vinci 5 surgical systems and is available as an upgrade for da Vinci Xi surgical systems.
7

-- 8 of 187 --

Table of Contents
Ion Endoluminal System
In 2019, the FDA cleared our Ion endoluminal system, which is a flexible, robotic-assisted, catheter-based platform that utilizes instruments and
accessories for which the first cleared indication is minimally invasive biopsies in the lung. Our Ion system extends our commercial offering beyond
surgery into diagnostic, endoluminal procedures.
The system features an ultra-thin, ultra-maneuverable catheter that can articulate 180 degrees in all directions. Ion incorporates real-time shape-sensing
technology, which allows for navigation into all segments of the lung and provides the procedural stability necessary for precision in a biopsy. Many
suspicious lesions found in the lung may be small and difficult to access, which can make diagnosis challenging, and Ion helps physicians obtain tissue
samples from deep within the peripheral lung, which could help enable earlier diagnosis.
Instruments and Accessories
We offer a comprehensive suite of stapling, energy, and core instrumentation for our da Vinci surgical systems. Our technology is designed to
transform the surgeon’s natural hand movements outside of the body into corresponding micro-movements inside the patient’s body and operate with
precision, just as they can in open surgery. With our technology, a surgeon can also use “motion scaling,” a feature that translates, for example, a three-
millimeter hand movement outside the patient’s body into a one-millimeter instrument movement in the surgical field inside the patient’s body. Motion
scaling is designed to allow precision and control for delicate tasks. In addition, our technology filters the tremor inherent in a surgeon’s hands.
Da Vinci Instruments. Most of the instruments that we manufacture incorporate wristed joints for natural dexterity and tips customized for various
surgical procedures. Various da Vinci instrument tips include forceps, scissors, electrocautery tools, scalpels, and other surgical tools that are familiar
to the surgeon from open surgery and conventional minimally invasive surgery (“MIS”). A variety of instruments may be selected and used
interchangeably during a surgery. Most instruments are sterilizable at the hospital, while others are provided sterile, and most are reusable for a defined
number of procedures. A programmed memory chip inside each instrument performs several functions that help determine how the da Vinci surgical
system and instruments work together. In addition, the chip generally will not allow the instrument to be used for more than the prescribed number of
procedures to help ensure that its performance meets specifications during each procedure.
Da Vinci Stapling. The SureForm and EndoWrist staplers are wristed, stapling instruments intended for resection, transection, and creation of
anastomoses. These instruments enable surgeons to precisely position and fire the stapler. We have various staplers that can be used with our da Vinci
5, da Vinci X, and da Vinci Xi surgical systems: the SureForm 30, 45, and 60 staplers, where the numeric designation indicates the length of the staple
line. SureForm staplers are single-use, fully wristed, stapling instruments intended to be used in general, thoracic, gynecologic, urologic, and pediatric
surgical procedures. The SureForm 30 stapler may deliver particular utility in thoracic procedures. The SureForm 45 stapler may receive particular use
in thoracic and colorectal procedures where maneuverability and visualization are limited; we now also have a SureForm 45 stapler available for the da
Vinci SP surgical system. The SureForm 60 stapler is intended to deliver particular value in bariatric procedures. Outside of the U.S. (“OUS”), we also
offer the EndoWrist 30 and 45 staplers that can be used with our da Vinci X and da Vinci Xi surgical systems. The EndoWrist 30 stapler is intended to
deliver particular utility with fine tissue interaction in lobectomy and other thoracic procedures. The EndoWrist 45 stapler is used in general,
gynecologic, thoracic, and urologic surgical procedures. We also have various clearances for five stapler reloads: gray (2.0 mm), white (2.5 mm), blue
(3.5 mm), green (4.3 mm), and black (4.6 mm). Not all reloads are available for use on all staplers. Not all staplers or reloads are available in all
countries.
Additionally, we recently introduced our 8 mm SureForm 30 Curved-Tip stapler and reloads (gray, white, and blue), which were designed to help
surgeons better visualize and reach anatomy through a combination of the 8 mm diameter instrument shaft and jaws, 120-degree cone of wristed
articulation, and the curved tip. As it fits through the 8 mm da Vinci surgical system instrument cannula, the stapler allows different angles for
surgeons to approach patient anatomy. Consistent with our other SureForm staplers, the 8 mm SureForm 30 Curved-Tip stapler integrates SmartFire
technology, which makes automatic adjustments to the firing process as staples are formed and the transection is made. The technology takes more
than 1,000 measurements per second, helping achieve a consistent staple line.
Da Vinci Energy. Our first-generation E-100 generator is offered as an upgrade to power our da Vinci Vessel Sealer Extend and SynchroSeal
instruments. Additionally, we recently introduced our second-generation E-200 generator, an advanced electrosurgical generator designed to provide
high-frequency energy for cutting, coagulation, and vessel sealing of tissues. The E-200 generator is integrated with the da Vinci 5 surgical system, is
compatible with our da Vinci X and Xi surgical systems, and can also function as a standalone electrosurgical generator. When connected to a da Vinci
surgical system, the E-200 delivers high-frequency energy to da Vinci instruments, with control and status messages communicated through an
Ethernet cable. The E-200 generator is also compatible with third-party handheld monopolar and bipolar instruments, as well as fingerswitch-equipped
instruments and Intuitive-provided auxiliary footswitches. The E-200
8

-- 9 of 187 --

Table of Contents
generator includes the same advanced energy capability as the E-100 generator and supports the same vessel sealing instruments.
Vessel Sealer Extend is a single-use, fully wristed, advanced bipolar instrument that is intended for grasping and blunt dissection of tissue, bipolar
coagulation, and mechanical transection of vessels up to 7 mm in diameter and tissue bundles that fit in the jaws of the instrument. This instrument
enables surgeons to control vessel sealing and is designed to enhance surgical efficiency and autonomy in a variety of general and gynecologic surgical
procedures. It is compatible with our da Vinci 5, da Vinci X, and da Vinci Xi surgical systems.
SynchroSeal enables a surgeon to perform rapid, one-step sealing and transection with a single pedal press. SynchroSeal uses advanced bipolar energy
from its raised cut electrode to transect tissue and then cool down quickly.
Accessory Products. We sell various accessory products, which are used in conjunction with the da Vinci surgical systems. Accessory products include
sterile drapes used to help ensure a sterile field during surgery, vision products, such as replacement 3D stereo endoscopes, camera heads, and light
guides, and other items that facilitate the use of the da Vinci surgical systems.
Instruments and accessories are also used with our Ion endoluminal system to perform lung biopsy procedures and for the operation and maintenance
of the system.
Ion Instruments. Instruments utilized with our Ion system include our fully articulating catheter, which is employed to navigate the intricate and
narrow airways of the lungs, our peripheral vision probe, an endoscope that provides real-time airway visualization for catheter navigation, and our
Flexision biopsy needles, which are used to procure tissue samples from lung nodules.
Accessory Products. Accessory products that are used in conjunction with the Ion system include cleaning tools and other ancillary equipment
essential for the operation and maintenance of the Ion system.
Learning
Intuitive provides a progressive learning journey to support the use of our technology. These training pathways leverage both learning engagements
and learning technologies. Learning engagement touchpoints vary by specific pathway, skill level, and interest, while learning technologies enable and
provide training directly to the customer. The portfolio of learning offerings includes role-specific training pathways, learning engagements, and learning
technology.
Training Pathways. Intuitive’s training pathways provide a systematic learning journey that helps customers build technical proficiency. There are
pathways for surgeons and physicians, residents and fellows, OR care teams, patient side assists, and robotic coordinators, as well as recommendations for
executives.
Learning Engagements. Intuitive learning engagements are touchpoints that support customers throughout their learning journeys. They vary by
pathway, skill level, and focus area. Engagements include case observations, online education, in-service training, simulation/skills training, OR care team
training, technology training, reprocessing training, proctoring, advanced training, and curriculum development support. Many of these programs take place
at Intuitive training centers and are taught by experienced Intuitive staff, while our advanced courses are taught by surgeon and physician instructors.
Learning Technology. Learning technologies are designed to help customers access training. Enabling technology helps bring innovative offerings to
the customer. Intuitive’s enabling technologies include Telepresence and the Advanced Insights Suite (which includes Case Insights and Insights Engine).
Learning technology solutions include Intuitive Learning, SimNow, customized training models, remote case observations, and remote proctoring. Two of
the technology solutions most often used by customers are Intuitive Learning and SimNow.
Intuitive Learning. Intuitive Learning is our customer learning management system that empowers customers to complete technology and procedure
education, while also being able to view, assign, and track technology and simulation learning. Intuitive Learning provides professional education for
surgeons/physicians, residents/fellows, care teams, patient side assists, robotic coordinators, and sterile reprocessing staff.
SimNow. Our cloud-enabled SimNow simulation platform is a practice tool that gives a user the opportunity to practice their skills and gain
familiarity with the surgeon console controls and supports the user’s progressive learning pathway. SimNow incorporates 3D, physics-based
computer simulation technology to immerse the user within a virtual environment and provides training capabilities that have been used extensively
by surgeons. The user navigates through the environment and completes exercises by controlling virtual instruments from the surgeon console. Upon
completion of a skills exercise, the skills simulator provides a quantitative assessment of user performance based on a variety of task-specific
metrics. The SimNow online connection drives real-time simulation performance tracking for surgeons and administrators through an online
dashboard and supports remote updates of the VR content and 3DHD videos to drive a
9

-- 10 of 187 --

Table of Contents
more interactive and engaging customer experience. SimNow is intended to augment, not replace, existing training programs for the da Vinci 5, da
Vinci X, da Vinci Xi, and da Vinci SP surgical systems.
Services
We have a network of field service engineers across the U.S., Canada, Europe, and Asia and maintain relationships with various distributors around the
globe. This infrastructure of customer service and support specialists offers a full complement of services, including installation, repair, maintenance, 24/7
technical support, and proactive system health monitoring.
Our comprehensive support and program assistance helps ensure customers and care teams maximize program performance and realize the greatest
value from their investment. Services include readiness support, maintenance support, perioperative consulting, Custom Hospital Analytics, and market
consulting optimization.
Readiness and Maintenance Support. Readiness support is operational support to ensure smooth onboarding and adoption of new systems and
technology. Maintenance support helps to maximize operational efficiency and reduce unplanned equipment downtime. It includes service care plans,
support teams, OnSite monitoring, software upgrades and updates, as well as a customer portal.
The service plan portfolio offers flexible service plans to ensure reliability of the systems and instruments and help optimize customers’ robotics
programs. The support team of expert field service, remote technical support, and customer care agents both prevent and quickly resolve technology
issues that could inhibit optimal system utilization. OnSite monitoring offers real-time remote service for pre-operative and intraoperative
troubleshooting, as well as proactive monitoring of system performance. Software upgrades and updates enable the latest product innovations,
enhancements, and reliability improvements. The customer portal is an online tool that enables customers to access system utilization and program
analytics, view orders and maintenance history, and initiate product returns and exchanges to help achieve the operational and financial goals of a
robotics program.
Perioperative Consulting. We offer a suite of customized solutions to improve a hospital’s efficiency and performance with Intuitive technologies.
New system integration support is available to streamline the start-up process and expedite increased procedure volumes. Overall program assessments
help to support efficiency improvements, cost reductions, and system access optimization.
Program Analytics. Our Custom Hospital Analytics program enables the integration of data sources so that individual health institutions can analyze
their data in their own environment. Using this data, hospital and healthcare system executives, administrators, care teams, and surgeons can gain
alignment around their programs based on their KPIs, determine best practices, assess gaps, and develop and implement actionable steps to address any
gaps.
Digital Solutions
Integrated digital capabilities provide connected offerings, streamlining performance for hospitals with program-enhancing insights. Secure-by-design,
cloud-enabled products analyze and simplify essential data to continuously optimize the use of time, tools, and techniques. Data that powers our digital
solutions comes from our vast network of connected surgical systems. This network also enables Intuitive to proactively monitor product performance with
high uptime reliability, as well as to provide timely software updates. Our latest da Vinci 5 surgical system incorporates an OR informatics platform that
integrates multiple applications and data sets to help orchestrate medical procedure workflows and powers data insights to Intuitive customers.
3D Modeling Services. Intuitive 3D Models is our augmented reality imaging product for use in kidney, prostate, lung, and rectal procedures. The
service extracts CT and MR scans, runs them through segmentation algorithms and, after technicians’ revision and radiologists’ review, returns a 3D
segmented model of the organ for use in planning for a procedure, intraoperative visualization, and surgical education. The tool uses augmented reality
to give surgeons an image with details of organ anatomy – blood vessels, tumor shape, and size – that they may not be able to see well with other two-
dimensional imaging. Intuitive designed this to help with pre-operative planning and intraoperative guidance to let surgeons know where critical
anatomy sits as they work through a procedure, as well as to be shared as a teaching tool for other physicians and patients. The product has recently
been launched, and the first sites have been onboarded and are ordering models.
My Intuitive. This mobile and web application was developed to be the single point for Intuitive customers to access individual or program-level data
from Intuitive. The application also offers comparisons of those insights with anonymized national benchmarks to help drive operational efficiencies
and decreased costs. It enables mobile access to Intuitive’s Learning platform, case reports generated automatically for the surgeon, and an ability for
surgeons to publish their practice information online for patients seeking local physicians.
My Intuitive+. My Intuitive+ is a digital subscription package available with the da Vinci 5 platform. It is designed to enable da Vinci users to access
surgical video and data collected to objectively understand their surgical performance,
10

-- 11 of 187 --

Table of Contents
collaborate in real time, and receive personalized training exercises. The solutions included in this package are Case Insights, Telepresence, and
SimNow 2.
Business Strategy
We align our goals to those of our customers through the Quintuple Aim: enabling physicians and hospitals to deliver better patient outcomes and
improve the patient and care team experience, while expanding access to care and lowering the total cost to treat per patient episode. Through the use of
Intuitive’s products and services, we seek to create value for patients, physicians, and hospitals, as summarized below.
Patient Value. We believe that the value of a medical procedure to a patient can be defined: Patient Value = Procedure Efficacy / Invasiveness. We
define procedure efficacy as a measure of the success of the procedure in helping resolve the underlying disease, and invasiveness as a measure of
patient pain and disruption of regular activities.
Adoption of Intuitive technology occurs by procedure and by geographic market and is driven by the relative patient value and the total intervention
costs of da Vinci and Ion procedures as compared to alternative options. We believe that most patients will place a higher value on procedures that are
not only more efficacious but also less invasive. When the patient value of a procedure using an Intuitive product is greater than that of alternative
intervention options, patients may benefit from seeking out physicians and hospitals that offer those products, which could potentially result in a local
geographic shift. Our goal is to provide products to physicians who, in turn, provide patients with procedure options that are both highly effective and
less invasive than others.
Physician Value. Intuitive products and services provide physicians with reliable and easy-to-use products that deliver superior ergonomics. We offer
physicians and their operating room staff efficient and effective training on the technical use of our products as well as a global peer network of
surgeon proctors and educators and advanced coursework. We help surgeons easily track and analyze their procedures and processes through the My
Intuitive app to explore their data and gain insights into their program and training needs.
Moreover, Ion, for example, brings physicians an integrated bronchoscopy experience from visualizing critical lung anatomy and planning each
patient’s procedure to navigating and biopsying small peripheral nodules. Results from studies have demonstrated a strong safety profile, with a
relatively low occurrence of pneumothorax.
Hospital Value. As recognized and evidenced in many published, peer-reviewed studies, we believe that robotic-assisted surgery with the da Vinci
surgical system can help hospitals build value by increasing surgical revenue and reducing costs through lower complication rates and reduced lengths
of patient stay, when compared to alternative treatment options. We offer our Custom Hospital Analytics program, which enables the individual health
institutions to analyze their data in their own environment. Using this data, administrators, chiefs of surgery, and physicians can gain alignment around
their programs based on their own data and goals.
Clinical Applications
There are over 70 representative clinical uses for da Vinci surgical systems. We are the beneficiaries of productive collaborations with leading surgeons
in exploring and developing new techniques and applications for robotic-assisted surgery with the da Vinci surgical system and minimally invasive biopsies
with the Ion endoluminal system—an important part of our creative process. We primarily focus our development efforts on those procedures in which we
believe our products bring the highest patient value, surgeon value, and hospital value. We currently focus on five surgical specialties: general surgery,
urologic surgery, gynecologic surgery, cardiothoracic surgery, and head and neck surgery. Key procedures that we are focused on include cholecystectomy,
hernia repair, colorectal, bariatric, upper gastrointestinal, appendectomy, prostatectomy, partial nephrectomy, hysterectomy, sacrocolpopexy, lobectomy, and
transoral surgery procedures. We also focus on minimally invasive biopsies in the lung. Representative surgical applications are described below.
Clinical Summary
General Surgery
Cholecystectomy. Cholecystectomy, or the surgical removal of the gallbladder, is a commonly performed general surgery
procedure. Cholecystectomy is the primary method for the treatment of gallstones and other gallbladder diseases. Most cholecystectomies are
performed using multi-port MIS techniques, although some surgeons choose to perform cholecystectomy using manual single-port
instrumentation. Firefly technology can be used to visualize biliary anatomy in three dimensions beneath the tissue surfaces during multi-port da
Vinci cholecystectomies.
Hernia Repair. A hernia occurs when an organ or other tissue squeezes through a weak spot in a surrounding muscle or connective tissue. During a
hernia repair surgery, the weakened tissue is secured, and defects are repaired. Common types of hernias are ventral and inguinal. Ventral, or
abdominal hernia, may occur through a scar after surgery in the abdomen. Inguinal hernia is a bulge in the groin and is more common in men. Hernia
repair can be performed using
11

-- 12 of 187 --

Table of Contents
traditional open surgery or MIS. There is a wide range of complexity in hernia repair surgeries and varying surgeon opinions regarding optimal
surgical approach. The benefits of minimally invasive and robotic-assisted hernia repair surgery vary by patient.
Colorectal Surgery. These procedures typically involve benign or cancerous conditions of the lower digestive system, in particular the rectum or
colon. Common procedures in this area include hemicolectomy, sigmoidectomy, low anterior resection, and abdominoperineal resection. Surgeons
have reported that the use of robotic-assisted surgery with a da Vinci surgical system and our latest technologies, such as the SureForm stapler and
da Vinci energy products, has enabled them to offer MIS approaches to a broader range of colorectal surgery patients.
Bariatric Surgery. A body of literature points to the benefit of surgery to treat patients with morbid obesity and its secondary effects, such as
diabetes. Sleeve gastrectomy and Roux-en-Y gastric bypass (“RYGB”) are commonly performed surgical procedures for morbid obesity in the U.S.
The body habitus of morbidly obese patients can make laparoscopic surgery physically challenging for the surgeon, and certain surgeons have found
value in using the da Vinci surgical system to improve upon the ergonomics when performing MIS in morbidly obese patients. In addition, RYGB
can be a technically challenging procedure due to the suturing, stapling, and tissue (bowel) manipulation that is required. Surgeons using the da
Vinci surgical system have reported a reduction in a critical complication (anastomotic leaks) relative to laparoscopic RYGB. Also, we believe
SureForm 60 may have particular utility in bariatric procedures.
Upper Gastrointestinal (GI). Upper GI surgery treats conditions affecting the upper part of the digestive system, such as stomach ulcers, esophageal
strictures, hiatal hernias, and various cancers. Common procedures includes gastrectomy, hiatal hernia repair, and Nissen fundoplication to treat
severe gastroesophogeal reflux disease. Da Vinci surgical systems allow surgeons to reach and operate in constricted areas of the abdomen that can
be difficult to reach. Thousands of peer-reviewed articles have demonstrated favorable perioperative outcomes.
Appendectomy. An appendectomy is the surgical removal of the appendix, most commonly performed to treat appendicitis, which, if left untreated,
can rupture and lead to a life-threatening infection. Use of the da Vinci surgical system for appendectomy procedures has shown to result in shorter
length of stay and fewer conversions as compared to a laparoscopic approach. In addition, SureForm 30, as well as our advanced energy products,
may have particular utility in appendectomy.
Urologic Surgery
Prostatectomy. Radical prostatectomy is the removal of the prostate gland in patients diagnosed with clinically localized prostate cancer. The
standard approach to the removal of the prostate was via an open surgical procedure. The conventional laparoscopic approach is an option, but it is
difficult and poses challenges to even the most skilled urologist. The da Vinci surgical system has enabled a large number of surgeons to convert
from using an open surgical technique to a minimally invasive technique.
Partial Nephrectomy. Partial nephrectomy is the removal of a small portion of a kidney (typically, an area of the kidney containing a tumor). Partial
nephrectomies are most commonly performed in patients diagnosed with clinically localized renal cancer. Excluding robotic-assisted surgery with a
da Vinci surgical system, there are three common surgical approaches to performing partial nephrectomies: open surgical technique, laparoscopy,
and hand-assisted laparoscopy, which is a hybrid of the open and laparoscopic techniques. Surgeons have reported that the da Vinci surgical system’s
capabilities may enable a large number of these procedures to be performed through a minimally invasive technique, conferring the benefits of MIS
to a broader range of partial nephrectomy patients. Treatment guidelines for patients with localized renal cancer recommend partial nephrectomy due
to the benefits that nephron-sparing surgery has in long-term patient outcomes. Published clinical literature has shown that the presence of a da Vinci
surgical system is associated with a higher-proportion of patients receiving a guideline-recommended partial nephrectomy.
Gynecologic Surgery
Hysterectomy. Removal of the uterus is one of the most commonly performed surgeries in gynecology and is performed for a variety of underlying
benign and cancerous conditions. Hysterectomies can be performed using open surgery (laparotomy) or MIS techniques, which include vaginal,
laparoscopic, and robotic-assisted approaches. Prior to the clearance of the da Vinci surgical system for use in gynecological procedures in 2005, the
majority of hysterectomies performed were open surgeries. We believe that robotic-assisted surgery with the da Vinci surgical system provides
patients the opportunity to receive a minimally invasive treatment as an alternative to an open hysterectomy.
Sacrocolpopexy. The abdominal (open) sacrocolpopexy is one of the operations performed to treat vaginal vault prolapse. Sacrocolpopexy involves
suturing a synthetic mesh that connects and supports the vagina to the sacrum (tailbone). A sacrocolpopexy can be performed using a conventional
laparoscopic technique; however, it is generally described as difficult and cumbersome to perform. Surgeons have reported that the da Vinci surgical
system’s
12

-- 13 of 187 --

Table of Contents
capabilities may enable a larger number of these procedures to be performed through a minimally invasive technique, conferring the benefits of MIS
to a broader range of sacrocolpopexy patients.
Cardiothoracic Surgery
Thoracic Surgery. Conventional approaches to surgical procedures in the thorax include both open and video-assisted thoracoscopic approaches.
Procedures performed via these methods include pulmonary wedge resection, pulmonary lobectomy, thymectomy, mediastinal mass excision, and
esophagectomy. Many thoracic procedures remain open procedures. Surgeons have reported that the use of robotic-assisted surgery with a da Vinci
surgical system in thoracic surgery has enabled them to offer MIS approaches to a broader range of thoracic surgery patients and improved clinical
outcomes compared to open and video-assisted thoracic surgery in published single-center, multi-center, and national database clinical studies. Also,
we believe the EndoWrist 30 stapler and the SureForm 30 stapler may have particular utility in thoracic procedures.
Head and Neck Surgery
Transoral Surgery. Head and neck cancers are typically treated by either surgical resection or chemo-radiation, or a combination of both. Surgical
resection performed by an open approach may require a “jaw-splitting” mandibulotomy. This procedure, while effective in treating cancer, is
potentially traumatic and disfiguring to the patient. MIS approaches via the mouth (transoral surgery) are challenged by line-of-sight limitations
dictated by conventional endoscopic tools. Chemo-radiation as a primary therapy does allow patients to avoid traumatic surgical incisions; however,
the literature suggests that this modality diminishes patients’ ability to speak and swallow normally. Surgeons have reported that da Vinci transoral
surgery allows them to operate on tumors occurring in the oropharynx (i.e., tonsil and base of tongue) and larynx via the mouth and to overcome
some of the line-of-sight limitations of conventional transoral surgery.
We believe that there are numerous additional applications that can be addressed with the da Vinci surgical system, and we work closely with our
surgeon customers to refine and explore new applications that can bring value to patients, surgeons, and hospitals.
Da Vinci Procedure Mix
Our da Vinci procedure business is broadly split into two categories: (1) cancer procedures and (2) procedures for benign conditions. Cancer and other
highly complex procedures tend to be reimbursed at higher rates than less complex procedures for benign conditions. Thus, hospitals are more sensitive to
the costs associated with treating less complex, benign conditions. Our strategy is to provide hospitals with attractive clinical and economical solutions
across the spectrum of procedure complexity. Our fully featured da Vinci 5 and da Vinci Xi surgical systems with advanced instruments (including the da
Vinci energy and da Vinci stapler products) and our Integrated Table Motion product target the more complex procedure segment. Our da Vinci X surgical
system is targeted toward price-sensitive customers and procedures. Our da Vinci SP surgical system complements our da Vinci 5, da Vinci X, and Xi
surgical systems by enabling surgeons to access narrow workspaces.
Sales and Customer Support
Sales Model
We sell our products and services through direct sales organizations in the U.S., Europe (excluding Italy, Spain, Portugal, Greece, and Eastern
European countries), China (through our majority-owned joint ventures, Intuitive Surgical-Fosun Medical Technology (Shanghai) Co., Ltd. and Intuitive
Surgical-Fosun (HongKong) Co. Ltd. (collectively, the “Joint Venture”), with Fosun Pharma), Japan, South Korea, India, Taiwan, and Canada. In the U.S.
(for some government customers), China, and Japan, we also utilize certain distributors in addition to our direct sales organization. In the remainder of our
OUS markets, we provide our products for sale through distributors. See “Item 7. Management’s Discussion and Analysis of Financial Condition and
Results of Operations” for further details on the Joint Venture. During the years ended December 31, 2025, 2024, and 2023, domestic revenue accounted
for 68%, 67%, and 66%, respectively, of total revenue, while revenue from our OUS markets accounted for 32%, 33%, and 34%, respectively, of total
revenue.
Our direct sales organization is composed of a capital sales team, responsible for selling systems, and a clinical sales team, responsible for supporting
the systems used in procedures performed at our hospital accounts. Our hospital accounts include both individual hospitals and healthcare facilities as well
as hospitals and healthcare facilities that are part of an integrated delivery network (“IDN groups”). The initial system sale into an account is a major
capital equipment purchase by our customers and typically has a lengthy sales cycle that can be affected by macroeconomic factors, capital spending
prioritization, the timing of budgeting cycles, and the evaluation of alternative products. Capital sales activities include educating surgeons or physicians
and hospital staff across multiple specialties on the benefits of robotic-assisted surgery with a da Vinci surgical system or robotic-assisted bronchoscopy
with an Ion endoluminal system, total treatment costs, and the clinical applications that our technology enables. We also train our sales organization to
educate hospital management on the potential benefits of
13

-- 14 of 187 --

Table of Contents
adopting our technology, including the clinical benefits of robotic-assisted surgery with a da Vinci surgical system or robotic-assisted bronchoscopy with an
Ion endoluminal system, in support of their Quintuple Aim objectives.
Our clinical sales team works on site at hospitals, interacting with surgeons or physicians, operating room staff, and hospital administrators to develop
and sustain successful robotic-assisted surgery or bronchoscopy programs. They assist the hospital in identifying surgeons or physicians who have an
interest in robotic-assisted surgery or bronchoscopy and the potential benefits provided by the da Vinci surgical system and the Ion endoluminal system.
Our clinical sales team provides current clinical information on robotic-assisted surgery or bronchoscopy practices and new product applications to the
hospital teams. Our clinical sales team has grown with the expanded installed bases of da Vinci surgical systems and Ion endoluminal systems as well as
the total number of procedures performed. We expect this organization to continue to grow as our business expands.
Our customers place orders to replenish their supplies of instruments and accessories on a regular basis. Orders received are typically shipped within
one business day. New direct customers who purchase a system typically place an initial stocking order of instruments and accessories soon after they
receive their system.
Our business is subject to seasonal fluctuations. Historically, placements of our da Vinci surgical systems have tended to be heavier in the fourth
quarter and lighter in the first quarter, as hospital budgets are reset. In addition, we have historically experienced lower procedure volume in the first and
third quarters and higher procedure volume in the second and fourth quarters. More than half of da Vinci procedures performed are for benign conditions.
These benign procedures and other short-term elective procedures tend to be more seasonal than cancer procedures and surgeries for other life-threatening
conditions. In the U.S., volumes for procedures associated with benign conditions are typically seasonally higher in the fourth quarter when more patients
have met annual deductibles and lower in the first quarter when deductibles are reset. Seasonality outside of the U.S. varies and is more pronounced around
local holidays and vacation periods, which have lower procedure volume. The timing of procedures and changes in procedure volume impact the timing of
instruments and accessories and capital purchases.
Customer Support
We have a network of field service and technical support engineers across the U.S., Canada, Europe, and Asia and maintain relationships with various
distributors around the globe. This infrastructure of customer service and support specialists, along with advanced service tools and solutions, offers a full
complement of services, including installation, repair, maintenance, 24/7 technical support, and proactive system health monitoring. We generate service
revenue by providing these services to our customers through comprehensive service contracts and time and material programs.
Research and Development
We focus our research and development efforts on innovation and improvement for products and services that align with our mission: We believe that
minimally invasive care is life-enhancing care. Through ingenuity and intelligent technology, we believe that we can expand the potential of physicians to
heal without constraints. We employ engineering and research and development staff to focus on delivering future innovations and sustaining
improvements that advance our mission. In certain instances, we complement our research and development effort through collaborations with other
companies, such as our Integrated Table Motion product offering developed with Hillrom (now a part of Baxter International Inc.).
Manufacturing
We manufacture our systems at our facilities in Sunnyvale, California, and Peachtree Corners, Georgia, as well as at our Joint Venture’s facility in
Shanghai, China. Our instruments and accessories are produced at our facilities in Sunnyvale, California, and Mexicali, Mexico. Additionally, we have Ion-
related manufacturing in Blacksburg, Virginia, and endoscope-related manufacturing in Parvomay, Bulgaria and at multiple sites in Germany.
We purchase both custom and off-the-shelf components from a large number of suppliers and subject them to stringent quality specifications and
processes. Some of the components necessary for the assembly of our products are currently provided to us by sole-sourced suppliers (the only recognized
supply source available to us) or single-sourced suppliers (the only approved supply source for us among other sources). We purchase the majority of our
components and major assemblies through purchase orders rather than long-term supply agreements and generally do not maintain large volumes of
finished goods relative to our anticipated demand.
Competition
We face competition in the forms of existing open surgery, conventional MIS (laparoscopy), drug therapies, radiation treatment, and other emerging
diagnostic and interventional surgical approaches. Some of these procedures are widely accepted in the medical community and, in many cases, have a long
history of use. Our success depends on continued clinical and technical innovation, quality, and reliability, as well as educating hospitals, surgeons, and
patients on the demonstrated results associated with robotic-assisted medical procedures using da Vinci surgical systems or Ion endoluminal systems and
their value
14

-- 15 of 187 --

Table of Contents
relative to other techniques. We also face competition from several companies that have introduced or are developing new approaches and MIS products.
We believe that the entrance or emergence of competition validates MIS and robotic-assisted surgery or robotic-assisted bronchoscopy.
Moreover, as we add new robotically controlled products (e.g., da Vinci stapling and da Vinci energy products) that compete with product offerings
traditionally within the domains of open surgery and/or conventional MIS, we face greater competition from larger and well-established companies, such as
Johnson & Johnson and Medtronic plc.
Additionally, we currently face, or anticipate facing, competition from companies with products used in open or MIS surgeries, including laparoscopy
and alternative multi-port, single-port, or endoluminal systems. We also compete with companies providing other therapeutic approaches for addressing
target clinical conditions, as well as companies developing diagnostic solutions that could serve as alternatives to current or planned Intuitive offerings.
Companies that have introduced products in the field of robotic-assisted medical procedures, or have made explicit statements about their efforts to enter
the field, include, but are not limited to, the following: Beijing Surgerii Robotics Company Limited; CMR Surgical Ltd.; Distalmotion SA; Harbin Sizhe
Rui Intelligent Medical Equipment Co., Ltd.; Johnson & Johnson; Karl Storz SE & Co. KG; Medicaroid Corporation; Medtronic plc; meerecompany Inc.;
Noah Medical Corporation; Shandong Weigao Group Medical Polymer Company Ltd.; Shanghai Microport Medbot (Group) Co., Ltd.; Shenzhen Edge
Medical Co., Ltd.; and SS Innovations International, Inc. Other companies with substantial experience in industrial robotics could potentially expand into
the field of medical robotics and become competitors. Additionally, we expect increasing competition within China for robotic-assisted systems. Our
revenues may be reduced due to pricing pressure if our competitors develop and market products that are more effective or less expensive than our
products. In addition, research efforts utilizing computers and robotics for medical procedures are underway at various companies and research institutions.
Our revenues may be adversely impacted as our competitors announce their intent to enter our geographic markets and as our customers anticipate the
availability of competing products. We may not be able to maintain or improve our competitive position against current or potential competitors, especially
those with greater resources.
Intellectual Property
We place considerable importance on obtaining and maintaining patent, copyright, trademark, and trade secret protection for significant new
technologies, products, and processes.
We generally rely upon a combination of intellectual property laws, confidentiality procedures, and contractual provisions to protect our proprietary
technology. For example, we have trademarks, both registered and unregistered, that provide distinctive identification of our products in the marketplace.
We also have exclusive and non-exclusive patent licenses with various third parties to supplement our own robust patent portfolio.
As of December 31, 2025, we owned more than 5,600 patents granted and still in force and more than 2,500 patents pending worldwide. We intend to
continue filing new patent applications in the U.S. and foreign jurisdictions to seek protection for our technology. Patents have finite terms. The expiration
of a patent ends the exclusive rights accorded by the patent for the invention claimed.
Government Regulation
Our products and operations are subject to regulation in the U.S. by the FDA and the State of California as well as by other countries and regions in
which we market and promote our products. In addition, our products must meet the requirements of a large and growing body of international regulations
and standards, which govern the design, manufacture, materials content and sourcing, testing, certification, packaging, installation, use, and disposal of our
products. We must continually keep abreast of these regulations, standards, and requirements and integrate our compliance into the development and
regulatory documentation for our products. Failure to meet these requirements could limit our ability to market our products in those regions that require
compliance with such regulations and standards. Examples of standards to which we are subject include electrical safety standards, such as those of the
International Electrotechnical Commission (e.g., IEC 60601-ss series of standards), and composition regulations, such as the Reduction of Hazardous
Substances (“RoHS”) and the Waste Electrical and Electronic Equipment (“WEEE”) Directives applicable in the European Union (“EU”), among others.
U.S. Regulation
FDA
Our products are subject to regulation as medical devices in the United States under the Federal Food, Drug, and Cosmetic Act (“FFDCA”), as
implemented and enforced by the FDA. The FDA regulates the development, design, non-clinical and clinical research, manufacturing, safety, efficacy,
labeling, packaging, storage, installation, recordkeeping, complaint and adverse event reporting, clearance, approval, certification, promotion, marketing,
export, import distribution, and service of medical devices in the U.S. to ensure that medical devices distributed domestically are safe and effective for their
intended uses.
15

-- 16 of 187 --

Table of Contents
Under the FFDCA, medical devices are classified into one of three classes—Class I, Class II, or Class III—depending on the degree of risk associated
with each medical device and the extent of control needed to ensure safety and effectiveness. Our current products are Class II medical devices.
Class II medical devices are those that are subject to general controls, and most require premarket demonstration of adherence to certain performance
standards or other special controls, as specified by the FDA, and special controls as deemed necessary by the FDA to ensure the safety and effectiveness of
the device. These special controls can include performance standards, post-market surveillance, patient registries, and FDA guidance documents.
Manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FFDCA requesting
authorization to commercially distribute the device. The FDA’s authorization to commercially distribute a device subject to a 510(k) premarket notification
is generally known as 510(k) clearance. Our current products are subject to premarket notification and clearance under section 510(k) of the FFDCA. To
obtain 510(k) clearance, we must submit to the FDA a premarket notification submission demonstrating that the proposed device is “substantially
equivalent” to a legally marketed predicate device.
The FDA may require additional information, including clinical data, to make a determination regarding substantial equivalence. In addition, the FDA
collects user fees for certain medical device submissions and annual fees for medical device establishments.
If the FDA agrees that the device is substantially equivalent to a predicate device, it will grant clearance to commercially market the device in the U.S.
The FDA has a statutory 90-day period to respond to a 510(k) submission; however, as a practical matter, clearance often takes longer. The FDA may
require further information, including clinical data, to make a determination regarding substantial equivalence. If the FDA determines that the device, or its
intended use, is not “substantially equivalent,” the device may be designated as a Class III device. The device sponsor must then fulfill more rigorous PMA
requirements or can request a risk-based classification determination for the device in accordance with the de novo classification pathway, which is a route
to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.
The PMA process is more demanding than the 510(k) premarket notification process. In a PMA application, the manufacturer must demonstrate that
the device is safe and effective, and the PMA application must be supported by extensive data, including data from preclinical studies and human clinical
trials. The FDA, by statute and regulation, has 180 days to review a PMA application, although the review more often occurs over a significantly longer
period of time and can take up to several years. In approving a PMA application or clearing a 510(k) submission, the FDA may also require some
additional manufacturing controls, design control activities and approvals, as well as specific post-market surveillance requirements when necessary to
protect the public health or to provide additional safety and effectiveness data for the device. In such cases, the manufacturer might be required to follow
certain patient groups for a number of years and make periodic reports to the FDA on the clinical status of those patients.
Clinical trials are almost always required to support a PMA or de novo request and are sometimes required to support a 510(k) submission. All clinical
investigations designed to determine the safety and effectiveness of a medical device must be conducted in accordance with the FDA’s investigational
device exemption (“IDE”) regulations, which govern investigational device labeling, prohibit the promotion of the investigational device, and specify an
array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. Regardless of the degree of risk presented by
the medical device, clinical studies must be approved by, and conducted under the oversight of, an Institutional Review Board (“IRB”) for each clinical
site. During a study, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical
investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping, and prohibitions on the
promotion of investigational devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to
the FDA’s regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the
investigational device, and comply with all reporting and recordkeeping requirements. Additionally, after a trial begins, we, the FDA, or the IRB could
suspend or terminate a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits.
After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major
change or modification in its intended use, will require a new 510(k) clearance or, depending on the modification, PMA approval or de novo classification.
The FDA requires each manufacturer to determine whether a proposed change requires submission of a 510(k), de novo classification, or a PMA or PMA
supplement in the first instance, but the FDA can review any such decision and disagree with a manufacturer’s determination. If the FDA disagrees with a
manufacturer’s determination, the FDA can require the manufacturer to cease marketing and/or request the recall of the modified device until it receives the
appropriate marketing authorization. Also, in these circumstances, the manufacturer may be subject to significant regulatory fines or penalties.
16

-- 17 of 187 --

Table of Contents
In addition, the FDA may place significant limitations upon the intended use of our products as a condition of granting marketing authorization.
Moreover, after a device is placed on the market, numerous FDA and other regulatory requirements continue to apply. These requirements include
establishment registration and device listing with the FDA; compliance with medical device reporting regulations, which require that manufacturers report
to the FDA if their device caused or contributed, or may have caused or contributed, to a death or serious injury or malfunctioned in a way that would likely
cause or contribute to a death or serious injury if it were to recur; compliance with corrections and removal reporting regulations, which require that
manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy
a violation of the FFDCA that may present a risk to health; the FDA’s recall authority, whereby the agency can order device manufacturers to recall from
the market a product that is in violation of governing laws and regulations; and post-market surveillance activities and regulations, which apply when
deemed by the FDA to be necessary to protect the public health or to provide additional safety and effectiveness data for the device. In addition, the FDA
and the Federal Trade Commission also regulate the advertising and promotion of our products to ensure that the claims we make are consistent with our
regulatory clearances, that there is scientific data to substantiate the claims, and that our advertising is neither false nor misleading. In general, we may not
promote or advertise our products for uses not within the scope of our intended use statement in our clearances or make unsupported safety and
effectiveness claims.
Our manufacturing processes are required to comply with the Quality Management System Regulation (“QMSR”). The QMSR, which became
effective on February 2, 2026, incorporates certain elements of ISO 13485:2016 by reference and covers, among other things, the methods used in, and the
facilities and controls used for, the design, testing, controlling, documenting, manufacture, packaging, labeling, storage, installation, and servicing of all
medical devices intended for human use. The QMSR also requires maintenance of extensive records, which demonstrate compliance with the FDA
regulation, the manufacturer’s own procedures, specifications, and testing, as well as distribution and post-market experience. Compliance with the QMSR
is necessary for a manufacturer to be able to continue to market cleared or approved product offerings in the U.S. A company’s facilities, records, and
manufacturing processes are subject to periodic scheduled or unscheduled inspections by the FDA. Failure to maintain compliance with applicable QMSR
requirements could result in the shut-down of, or restrictions on, manufacturing operations and the recall or seizure of marketed products. If the FDA
determines that a manufacturer has failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions,
which may result in any of the following sanctions:
• warning letters, untitled letters, fines, injunctions, consent decrees, administrative penalties, and civil or criminal penalties;
• recalls, withdrawals, or administrative detention or seizure of our products;
• operating restrictions or partial suspension or total shutdown of production;
• refusing or delaying requests for 510(k) marketing clearance or PMA approvals of new products or modified products;
• withdrawing 510(k) clearances or PMA approvals that have already been granted;
• refusal to grant export approvals for our products; or
• criminal prosecution.
In addition, the discovery of previously unknown problems with any marketed products, including unanticipated adverse events or adverse events of
increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or off-label by a physician in the practice of
medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls.
Products manufactured outside of the U.S. by or for us are subject to U.S. Customs and FDA inspection upon entry into the U.S. We must demonstrate
compliance of such products with U.S. regulations and carefully document the eventual distribution or re-exportation of such products. Failure to comply
with all applicable regulations could prevent us from having access to products or components critical to the manufacture of finished products and lead to
shortages and delays.
Other Healthcare Regulatory Laws
We are subject to broadly applicable fraud and abuse and other healthcare laws and regulations that may constrain the business or financial
arrangements and relationships through which we research, market, sell, and distribute our products. Restrictions under applicable federal and state
healthcare laws and regulations, include the following:
• the federal Anti-Kickback Statute, which prohibits, among other things, individuals and entities from knowingly and willfully soliciting, offering,
receiving or providing remuneration, directly or indirectly, in cash or in kind, to induce or reward, or in return for, either the referral of an
individual for, or the purchase, order or recommendation of, any good or service, for which payment may be made, in whole or in part, under a
federal and state healthcare program such as Medicare and Medicaid. A person or entity does not need to have actual knowledge of the statute or
specific intent to violate it in order to have committed a violation;
17

-- 18 of 187 --

Table of Contents
• the federal criminal and civil false claims laws, including the federal False Claims Act, which can be enforced through civil whistleblower or qui
tam actions against individuals or entities, and the Federal Civil Monetary Penalties Laws, which prohibit, among other things, knowingly
presenting, or causing to be presented, to the federal government, claims for payment that are false or fraudulent, knowingly making, using or
causing to be made or used, a false record or statement material to a false or fraudulent claim, or from knowingly making a false statement to
avoid, decrease, or conceal an obligation to pay money to the federal government. In addition, certain marketing practices, including off-label
promotion, may also violate false claims laws. Moreover, the government may assert that a claim including items and services resulting from a
violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal False Claims Act;
• the Health Insurance Portability and Accountability Act of 1996, as amended by the Health Information Technology for Economic and Clinical
Health Act of 2009, and regulations implemented thereunder (collectively “HIPAA”), which imposes criminal and civil liability, prohibits, among
other things, knowingly and willfully executing, or attempting to execute a scheme to defraud any healthcare benefit program, or knowingly and
willfully falsifying, concealing, or covering up a material fact or making any materially false statement in connection with the delivery of or
payment for healthcare benefits, items, or services; similar to the federal Anti-Kickback Statute, a person or entity does not need to have actual
knowledge of the statute or specific intent to violate it in order to have committed a violation;
• the Physician Payments Sunshine Act, which requires certain manufacturers of covered drugs, devices, biologics, and medical supplies that are
reimbursable under Medicare, Medicaid, or the Children’s Health Insurance Program, with certain exceptions, to report annually to the Centers for
Medicare & Medicaid Services (“CMS”) information on certain payments and other transfers of value to physicians (defined to include doctors,
dentists, optometrists, podiatrists, and chiropractors), teaching hospitals, and certain other health care providers (such as physician assistants and
nurse practitioners), as well as ownership and investment interests held by physicians and their immediate family members;
• analogous state and foreign laws and regulations, such as state anti-kickback and false claims laws, which may apply to sales or marketing
arrangements and claims involving healthcare items or services reimbursed by non-governmental third-party payors, including private insurers;
and
• certain state laws that require medical device manufacturers to comply with the industry’s voluntary compliance guidelines and the relevant
compliance guidance promulgated by the federal government in addition to requiring such manufacturers to report information related to payments
to clinicians and other healthcare providers or marketing expenditures.
Violations of any of these laws may result in significant penalties, including but not limited to the following: civil, criminal, and administrative
penalties; damages; fines; disgorgement; imprisonment; the curtailment or restructuring of operations; loss of eligibility to obtain approvals from the FDA;
exclusion from participation in government contracting, healthcare reimbursement, or other government programs, including Medicare and Medicaid;
integrity oversight and reporting obligations; or reputational harm.
Foreign Regulation
In order for us to market our products in countries outside the United States, we must obtain regulatory approvals or certifications and comply with
extensive product quality system and composition regulations in other countries. These regulations, including the requirements for approvals, clearance, or
certifications and the time required for regulatory review, vary from country to country. Some countries have regulatory review processes that are
substantially longer than U.S. processes. Failure to obtain regulatory approval or certification in a timely manner and meet all of the local requirements,
including language and specific safety standards, in any foreign country in which we plan to market our products could prevent us from marketing products
in such countries or subject us to sanctions and fines.
China
China has its own regulatory agency, the National Medical Products Administration (“NMPA”). They require regulatory approvals and compliance
with extensive safety and quality system regulations. Failure to obtain regulatory approval or failure to comply with any regulation may negatively impact
our ability to generate revenue and harm our business. In addition to product registration approvals, our system sales into China are also dependent on
obtaining importation authorizations and provincial approvals, as well as hospitals completing a tender and hospital listing process under the authorization.
In June 2023, the China National Health Commission published the 14 five-year plan quota for major medical equipment to be sold in China on its official
website (the “2023 Quota”). Under the original 2023 Quota, the government will allow for the sale of 559 new surgical robots into China, which could
include da Vinci surgical systems as well as surgical systems introduced by others. Sales of da Vinci surgical systems under the quota are uncertain, as they
are dependent on hospitals completing a tender process and receiving associated approvals.
th
18

-- 19 of 187 --

Table of Contents
Japan
Most medical devices must undergo thorough safety examinations and demonstrate medical efficacy before they receive regulatory approval to be sold
in Japan. We obtained approval from the Japanese Ministry of Health, Labor, and Welfare (“MHLW”) for our da Vinci Si surgical system in October 2012,
for our da Vinci Xi surgical system in March 2015, and for our da Vinci X surgical system in April 2018. In September 2022, we received regulatory
clearance for the da Vinci SP surgical system in Japan for the same set of procedures as can be performed on the da Vinci Xi surgical system in Japan. In
July 2025, we received regulatory clearance for our latest da Vinci 5 surgical system for use in all surgical specialties and procedures indicated for da Vinci
Xi, except for cardiac indications. We have received national reimbursement status in Japan for a number of procedures since the approval of our first da
Vinci surgical system in 2012. An additional eight da Vinci procedures were granted reimbursement in April 2022, including colon resection, and an
additional five da Vinci procedures were granted reimbursement in April 2024, including lobectomy for benign conditions. In addition, we received higher
reimbursement for da Vinci gastrectomy procedures, as compared to open and conventional laparoscopic procedure reimbursements, and higher
reimbursement for certain da Vinci rectal resection procedures, as compared to open procedure reimbursements. The additional reimbursed procedures have
varying levels of conventional laparoscopic penetration and will generally be reimbursed at rates equal to the conventional laparoscopic procedures. Given
the reimbursement level and laparoscopic penetration for these additional procedures, there can be no assurance that the adoption pace for these procedures
will be similar to prostatectomy or partial nephrectomy, given their higher reimbursement, or any other da Vinci procedure. If these procedures are not
adopted and we are not successful in obtaining adequate procedure reimbursements for additional procedures, then the demand for our products in Japan
could be limited. The process of reimbursement for new da Vinci surgical procedures in Japan is led by the surgical societies. The societies submit for
reimbursement or incremental reimbursement to the MHLW for their evaluation. The decision to reimburse requires in-country clinical data and is fixed in
April of even-numbered years.
European Union
The EU has adopted specific directives and regulations regulating the design, manufacture, clinical investigation, conformity assessment, labeling, and
adverse event reporting for medical devices. Until and including May 25, 2021, medical devices were regulated by Council Directive 93/42/EEC (the “EU
Medical Devices Directive” or “EU MDD”), which has been repealed and replaced by Regulation (EU) No 2017/745 (the “EU Medical Devices
Regulation” or “EU MDR”). Our current certificates have been granted under the EU MDD and EU MDR. In accordance with the EU MDR’s recently
extended transitional provisions, both (i) devices lawfully placed on the market pursuant to the EU MDD prior to May 26, 2021, and (ii) legacy devices
lawfully placed on the EU market after May 26, 2021, in accordance with the EU MDR transitional provisions, may generally continue to be made
available on the market or put into service, provided that the requirements of the transitional provisions are fulfilled. However, even in this case,
manufacturers must comply with a number of new or reinforced requirements set forth in the EU MDR with regard to the registration of economic
operators and of devices, post-market surveillance, and vigilance requirements.
Pursuing marketing of medical devices in the EU will notably require that our devices be certified under the new regime set forth in the EU MDR.
In the EU, there is currently no premarket government review of medical devices. However, the EU requires that all medical devices placed on the
market in the EU must meet the general safety and performance requirements laid down in Annex I to the EU MDR, including the requirement that a
medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. Medical
devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and, where
applicable, other persons, provided that any risks that may be associated with their use constitute acceptable risks when weighed against the benefits to the
patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. The
European Commission has adopted various standards applicable to medical devices. These include standards governing common requirements, such as
sterilization and safety of medical electrical equipment and product standards for certain types of medical devices. There are also harmonized standards
relating to design and manufacture. While not mandatory, compliance with these standards is viewed as the easiest way to satisfy the general safety and
performance requirements as a practical matter, as it creates a rebuttable presumption that the device satisfies that general safety and performance
requirements.
Compliance with the general safety and performance requirements of the EU MDR is a prerequisite for European Conformity (“CE”) marking, without
which medical devices cannot be marketed or sold in the EU. To demonstrate compliance with the general safety and performance requirements, medical
device manufacturers must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification.
As a general rule, demonstration of conformity of medical devices and their manufacturers with the general safety and performance requirements must be
based, among other things, on the evaluation of clinical data supporting the safety and performance of the products during normal conditions of use.
Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and
foreseeable risks, and any adverse events, are minimized and acceptable when
19

-- 20 of 187 --

Table of Contents
weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by
suitable evidence. Except for low-risk medical devices (Class I), where the manufacturer can issue an EC declaration of conformity based on a self-
assessment of the conformity of its products with the general safety and performance requirements (except for any parts that relate to sterility, metrology, or
reuse aspects), a conformity assessment procedure requires the intervention of a notified body. Notified bodies are independent organizations designated by
EU member states to assess the conformity of devices before being placed on the market. A notified body would typically audit and examine a product’s
technical dossiers and the manufacturer’s quality system (notified body must presume that quality systems that implement the relevant harmonized
standards, which is ISO 13485:2016 for Medical Devices Quality Management Systems, conform to these requirements). If satisfied that the relevant
product conforms to the relevant general safety and performance requirements, the notified body issues a certificate of conformity, which the manufacturer
uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on
the market throughout the EU.
Throughout the term of the certificate of conformity, the manufacturer will be subject to periodic surveillance audits to verify continued compliance
with the applicable requirements. In particular, there will be a new audit by the notified body before it will renew the relevant certificate(s).
The EU MDR requires that, before placing a device on the market, other than a custom-made device, manufacturers (as well as other economic
operators, such as authorized representatives and importers) must register by submitting identification information to the European database on medical
devices (EUDAMED), unless they have already registered. The information to be submitted by manufacturers (and authorized representatives) also
includes the name, address, and contact details of the person or persons responsible for regulatory compliance. The EU MDR also requires that, before
placing a device on the market, other than a custom-made device, manufacturers must assign a unique identifier to the device and provide it along with
other core data to the unique device identifier (“UDI”) database. These new requirements aim at ensuring better identification and traceability of the
devices. Each device – and as applicable, each package – will have a UDI composed of two parts: a device identifier (“UDI-DI”), specific to a device, and a
production identifier (“UDI-PI”) to identify the unit producing the device. Manufacturers are also notably responsible for entering the necessary data on
EUDAMED, which includes the UDI database, and for keeping it up to date. The obligations for registration in EUDAMED will become applicable on
May 28, 2026, for the four first modules related to (i) economic actor and (ii) UDI/Devices registrations, (iii) notified bodies and certificates, and (iv)
market surveillance. Until EUDAMED is fully functional, the corresponding provisions of the MDD continue to apply for the purpose of meeting the
obligations laid down in the provisions regarding exchange of information, including, and in particular, information regarding registration of devices and
economic operators.
All manufacturers placing medical devices on the market in the EU must comply with the EU medical device vigilance system, which has been
reinforced by the EU MDR. Under this system, serious incidents and Field Safety Corrective Actions (“FSCAs”) must be reported to the relevant
authorities of the EU member states. These reports will have to be submitted through EUDAMED (once functional) and aim to ensure that, in addition to
reporting to the relevant authorities of the EU member states, other actors, such as the economic operators in the supply chain, will also be informed. Until
EUDAMED is fully functional, the corresponding provisions of the MDD continue to apply. Manufacturers are required to take FSCAs, which are defined
as any corrective action for technical or medical reasons to prevent or reduce a risk of a serious incident associated with the use of a medical device that is
made available on the market. A serious incident is any malfunction or deterioration in the characteristics or performance of a device on the market (e.g.,
inadequacy in the information supplied by the manufacturer, undesirable side-effect, etc.), which, directly or indirectly, might lead to either the death or
serious deterioration of the health of a patient, user, or other persons, or to a serious public health threat. An FSCA may include the recall, modification,
exchange, destruction, or retrofitting of the device. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to
the end users of the device through Field Safety Notices. For similar serious incidents that occur with the same device or device type and for which the root
cause has been identified or a FSCA implemented or where the incidents are common and well documented, manufacturers may provide periodic summary
reports instead of individual serious incident reports.
Manufacturers (and authorized representatives) must also have available within their organization at least one person responsible for regulatory
compliance, or PRRC, who possesses the requisite expertise in the field of medical devices. The PRRC is responsible for all aspects of compliance with the
requirements of the EU MDR and in particular compliance with post-market surveillance and vigilance requirements.
The advertising and promotion of medical devices are subject to some general principles set forth in EU legislation. According to the EU MDR, only
devices that are CE marked may be marketed and advertised in the EU in accordance with their intended purpose. Directive 2006/114/EC concerning
misleading and comparative advertising and Directive 2005/29/EC on unfair commercial practices, while not specific to the advertising of medical devices,
also apply to the advertising thereof and contain general rules, for example, requiring that advertisements are evidenced, balanced, and not misleading.
Specific requirements are defined at a national level. EU member states’ laws related to the advertising and promotion of medical
20

-- 21 of 187 --

Table of Contents
devices, which vary between jurisdictions, may limit or restrict the advertising and promotion of products to the general public and may impose limitations
on promotional activities with healthcare professionals.
Many EU member states have adopted specific anti-gift statutes that further limit commercial practices for medical devices, in particular vis-à-vis
healthcare professionals and organizations. Additionally, there has been a recent trend of increased regulation of payments and transfers of value provided
to healthcare professionals or entities and many EU member states have adopted national “Sunshine Acts,” which impose reporting and transparency
requirements (often on an annual basis), similar to the requirements in the United States, on medical device manufacturers. Certain countries also mandate
implementation of commercial compliance programs.
In the EU, regulatory authorities have the power to carry out announced and, if necessary, unannounced inspections of companies, as well as suppliers
and/or sub-contractors and, where necessary, the facilities of professional users. Failure to comply with regulatory requirements (as applicable) could
require time and resources to respond to the regulatory authorities’ observations and to implement corrective and preventive actions, as appropriate.
Regulatory authorities have broad compliance and enforcement powers and, if such issues cannot be resolved to their satisfaction, can take a variety of
actions, including untitled or warning letters, fines, consent decrees, injunctions, or civil or criminal penalties.
The aforementioned EU rules are generally applicable in the European Economic Area (“EEA”), which consists of the 27 EU member states as well as
Iceland, Liechtenstein, and Norway.
Brexit and the UK Regulatory Framework
Since January 1, 2021, the Medicines and Healthcare Products Regulatory Agency (“MHRA”) has been the sovereign regulatory authority responsible
for Great Britain (i.e., England, Wales, and Scotland) medical device clearances. Following the end of the Brexit transitional period on January 1, 2021,
new regulations require all medical devices to be registered with the MHRA before being placed on the Great Britain market. From January 1, 2022, non-
UK manufacturers were required to appoint a UK Responsible Person for the purposes of registering devices placed on the Great Britain market. Under the
terms of the Protocol on Ireland/Northern Ireland, the EU MDR applies to medical devices placed on the Northern Ireland market in the same way as it
applies to medical devices marketed in the EU. In addition, the Trade Deal between the UK and the EU generally provides for cooperation and exchange of
information between the parties in the areas of product safety and compliance, including market surveillance, enforcement activities and measures,
standardization-related activities, exchanges of officials, and coordinated product recalls. As such, processes for compliance and reporting should reflect
requirements from regulatory authorities.
On June 16, 2025, the UK adopted an amendment to the Medical Devices Regulations 2002 (“UK Medical Devices Regulations”) intended to clarify
and strengthen the post-market surveillance requirements for medical devices in Great Britain. In addition, the MHRA launched a consultation between
November 14, 2024, and January 5, 2025, on proposals to update the pre-market requirements for medical devices in Great Britain. On July 22, 2025, the
MHRA published a response to the consultation confirming that it will incorporate the results of this consultation into new UK legislation on pre-market
requirements for medical devices in Great Britain. A draft of the new legislation is expected in 2026. Under the current UK Medical Devices Regulations,
certain medical devices need to be “UKCA” certified by a UK approved body in order to be lawfully placed on the Great Britain market. However, certain
medical devices in compliance with: (1) the EU Medical Devices Directive can continue to be placed on the Great Britain market until the sooner of
certificate expiration or June 30, 2028; or (2) the EU Medical Devices Regulation can continue to be placed on the Great Britain market until the sooner of
certificate expiration or June 30, 2030. The MHRA has confirmed that it intends to launch a consultation regarding the indefinite recognition of such
medical devices in Great Britain. Medical devices also need to bear a physical UK Conformity Assessment (“UKCA”) mark in order to be lawfully placed
on the Great Britain market. However, the MHRA has confirmed in its recent response to the consultation on pre-market requirements for medical devices
in Great Britain that it intends to remove the requirement for a medical device and its labeling (i.e., packaging and instructions for use) in Great Britain to
bear a physical UKCA mark. Instead of requiring a medical device and its labeling to bear a UKCA mark, manufacturers will be required to assign a UDI
to a medical device and register the UDI in a publicly accessible database before the medical device is placed on the Great Britain market. If this change is
implemented, we will no longer be required to affix the physical UKCA mark to our medical devices, but we will need to assign and affix a UDI and
register the UDI in a publicly accessible database.
Other countries
Regulations in other countries, including the requirements for approvals, certification, or clearance and the time required for regulatory review, vary
from country to country. Certain countries, such as South Korea, Brazil, Australia, India, and Canada, have their own regulatory agencies. These countries
typically require regulatory approvals and compliance with extensive safety and quality system regulations included in the MDSAP (Medical Device Single
Audit Program) that we comply with every year as part of our annual audit program. Failure to obtain regulatory approval in any foreign country in which
we plan to market our products, or failure to comply with any regulation in any foreign country in which we market our products may negatively impact
our ability to generate revenue and harm our business.
21

-- 22 of 187 --

Table of Contents
In addition, local regulations may apply, which govern the use of our products and which could have an adverse effect on our product utilization if they
are unfavorable. All such regulations are revised from time to time and, in general, are increasing in complexity and in the scope and degree of
documentation and testing required. There can be no assurance that the outcomes from such documentation and testing will be acceptable to any particular
regulatory agency or will continue to be acceptable over time. There are further regulations governing the importation, marketing, sale, distribution, use,
and service as well as the removal and disposal of medical devices in the regions in which we operate and market our products. Failure to comply with any
of these regulations could result in sanctions or fines and could prevent us from marketing our products in these regions.
Data Privacy and Security Laws
In connection with operating our business, we receive, store, use, and otherwise process information that relates to individuals and/or constitutes
“personal data,” “personal information,” “personally identifiable information,” or similar terms under applicable data privacy laws. Numerous state,
federal, and foreign laws, regulations, standards, and other obligations govern the collection, use, disclosure, confidentiality, and security of personal
information, including health-related information. For example, in the U.S., HIPAA imposes privacy, security, and breach notification obligations on
covered entities and their business associates to ensure the confidentiality, integrity, and availability of individually identifiable health information. At the
state level, multiple states have enacted comprehensive consumer privacy laws. Notably, the California Consumer Privacy Act, as amended by the
California Privacy Rights Act, gives California residents expanded rights to access, correct, and delete their personal information, opt out of certain
personal information sharing, and receive detailed information about how their personal information is used. We are also subject to various foreign data
privacy laws, including the European Union General Data Protection Regulation 2016/679 and applicable national supplementing laws and to the United
Kingdom General Data Protection Regulation and Data Protection Act 2018, as well as applicable data privacy laws in China. Privacy and security laws,
regulations, and other obligations are constantly evolving, may conflict with each other to complicate compliance efforts, and can result in investigations,
proceedings, or actions that lead to significant civil and/or criminal penalties and restrictions on data processing.
Third-Party Coverage and Payment
Our customers, including physicians, hospitals, and outpatient facilities, typically bill third-party payors for the costs and fees associated with the
procedures in which our products are used. In the U.S., in order to receive payment for the procedures performed using our products, our customers must
report codes that describe the services or products furnished and determine the medical necessity of the service or whether the service is included in the
payors’ policy. In the U.S. and most markets globally where we sell our products, payment for medical services and surgical procedures to hospitals,
outpatient facilities, and surgeons (collectively “providers”) is determined by the government, commercial payors (insurers), or both.
In the U.S., the CMS and its fiscal intermediaries (Medicare Administrative Contractors) and state Medicaid programs establish reimbursement
policies for medical and surgical services at the state and federal level for the Medicare and Medicaid programs. Third-party payors often rely upon
Medicare coverage policy and payment limitations in setting their own coverage and payment policies but also have their own methods and approval
processes. Commercial payors in non-capitated contracts commonly establish payment to providers based on a percentage of the Medicare payment rate.
Physicians and outpatient facilities bill for medical and surgical services by reporting a combination of billing codes. Current Procedural Terminology
(“CPT”) codes are created by the American Medical Association (“AMA”) with input from CMS and commercial payors to describe medical and surgical
procedures. CPT codes currently exist for minimally invasive surgical procedures, which may involve the da Vinci surgical system, as well as for robotic-
assisted bronchoscopy, which may involve the Ion endoluminal system. In general, the majority of payors, including Medicare, consider robotic assistance
as a tool used to perform the procedure and do not pay providers more for a procedure that involves robotic assistance using the da Vinci, Ion, or any other
robotic system. Because there is often no separate payment for the use of our products, the additional cost associated with the use of our products can affect
the profit margin of the hospital or surgery center where the procedure is performed. If hospitals do not obtain sufficient payment from third-party payors
for procedures performed with our products or if governmental and private payors’ policies do not cover surgical procedures performed using our products,
hospital adoption or utilization of our products could be negatively impacted, and we may not be able to generate the revenue necessary to support our
business.
Hospitals bill for inpatient services by reporting ICD-10-PCS codes. CMS is primarily responsible for overseeing changes and modifications to ICD-
10-PCS codes. Medicare payments to hospitals for services provided during an inpatient stay are based on the Inpatient Prospective Payment System
(“IPPS”). Under the IPPS, each patient discharge is categorized into a Medicare Severity Adjusted Diagnosis-Related Group (“MS-DRG” or “DRG”). Each
DRG has an assigned payment weight based on the average resources used for Medicare patients in that DRG, taking into account the patient’s principal
diagnosis, surgical procedures, age, discharge status, and additional or secondary diagnoses, among other things. The DRG is a single, bundled payment
intended to cover all costs associated with the inpatient admission.
22

-- 23 of 187 --

Table of Contents
The use of robotic technology does not influence the MS-DRG assignment or payment for an inpatient admission related to a surgical procedure. CMS
annually updates hospital inpatient and outpatient payments based on hospitals’ charge data. Hospital inpatient and outpatient payments are also adjusted
based on whether the hospital is a teaching hospital, its geographic location, and any failures to meet certain quality metrics, among other factors.
Commercial payors commonly establish inpatient facility payment for providers using published Medicare DRG rates as a benchmark. In some
uncommon cases, commercial payors pay for inpatient hospital admissions on a per diem basis. Commercial payment to providers varies depending on the
procedure performed, geographic location, contractual allowances, and other factors.
Medicare and commercial payor payments to facilities for medical and surgical services may not always fully reimburse providers for all costs
associated with furnishing these procedures. If payment is insufficient for procedures involving our technology, hospitals and physicians may decide not to
use our products.
In countries outside of the U.S., payment for surgical services to physicians and facilities differs considerably and varies by country. In some markets,
there is a single public payor who provides a global annual budget to hospitals to provide all care to the population served in a designated geographic area.
In other markets, private insurance can be purchased or is provided by employers to supplement public health insurance. In some countries, patients may be
permitted to pay directly for surgical services; however, such “co-pay” practices are not common (or allowed) in many countries. Further, in many global
markets, access to procedures and technology is governed or heavily influenced by Health Technology Assessment (“HTA”) organizations, which conduct
periodic and extensive evidence-based reviews of the clinical value and cost effectiveness of a new technology. To effectively conduct our business, we
may need to seek OUS reimbursement approvals, and we do not know if these required approvals will be obtained in a timely manner or at all. In addition,
in some markets, HTA organizations may publish reports with mixed conclusions about the clinical and economic value of our products to the population.
Such reviews could negatively impact hospital adoption of our technology.
Healthcare Reform
In the U.S., there have been, and continue to be, legislative initiatives designed to contain healthcare costs. For example, the Patient Protection and
Affordable Care Act (the “ACA”) enacted in March 2010 introduced significant changes affecting healthcare providers, insurers, pharmaceutical
companies, and medical device manufacturers, including revenue-generating provisions to fund expanded health insurance coverage and support research
of the comparative effectiveness of healthcare treatments and strategies. To date, this research has had a negligible effect on Medicare and other third-party
payor coverage and reimbursement policies. Since enactment of the ACA, additional legislative changes have included an aggregate reduction in Medicare
payments effective from April 1, 2013, through 2032. More recently, the One Big Beautiful Bill Act (the “OBBBA”), enacted on July 4, 2025, contains
provisions that, among other changes, may cause a decrease in enrollment in Medicaid and ACA marketplace plans, which could adversely affect demand
for our products. Additionally, individual U.S. states are increasingly enacting laws to control product pricing, reimbursement, and marketing cost
transparency.
In the U.S. and abroad, reimbursement is dynamic and subject to change annually by public and private payors. Congress and government agencies
may also intervene and pass legislation that is intended to reduce healthcare spending, which could impact market access. Such legislative interventions can
vacillate significantly based on government leadership. Other federal or state healthcare reform measures that may be adopted in the future could have a
material adverse effect on our business. Any regulatory or legislative developments in domestic or foreign markets that eliminate or reduce reimbursement
rates for procedures performed with our products could harm our ability to sell our products or cause downward pressure on the prices of our products,
either of which would adversely affect our business, financial condition, and results of business operations.
Similar reform measures may be adopted in foreign jurisdictions. For instance, on December 13, 2021, the EU Regulation No 2021/2282 on HTA,
amending Directive 2011/24/EU, was adopted. While the Regulation entered into force in January 2022, it will only begin to apply from January 2025
onwards, with preparatory and implementation-related steps to take place in the interim. Once applicable, it will have a phased implementation depending
on the concerned products. This Regulation intends to boost cooperation among EU member states in assessing health technologies, including certain high-
risk medical devices, and provide the basis for cooperation at the EU level for joint clinical assessments in these areas. It will permit EU member states to
use common HTA tools, methodologies, and procedures across the EU, working together in four main areas, including joint clinical assessment of the
innovative health technologies with the highest potential impact for patients, joint scientific consultations whereby developers can seek advice from HTA
authorities, identification of emerging health technologies to identify promising technologies early, and continuing voluntary cooperation in other areas.
Individual EU member states will continue to be responsible for assessing non-clinical (e.g., economic, social, and ethical) aspects of health technology and
making decisions on pricing and reimbursement.
23

-- 24 of 187 --

Table of Contents
Human Capital
Delivering on our mission depends on our ability to attract, engage, retain, and further develop top talent around the globe. We strive to enable this by
making Intuitive an inclusive and safe workplace with opportunities for our employees, regardless of background, to grow and develop in their careers.
Intuitive provides competitive compensation, benefits, and programs that encourage employee health and wellness as well as foster connections between
our employees, the communities, and the customers we serve.
As of December 31, 2025, we had approximately 17,021 full-time employees, with approximately 2,288 in research and development, 7,625 in
manufacturing operations, 4,837 in commercial and service operations, and 2,271 in administrative activities. During 2025, the number of employees
increased by approximately 1,383. Our employees are based in 29 different countries around the world. Our global workforce consists of a diverse range of
highly skilled talent. During 2025, our turnover rate was approximately 9.3%.
Inclusion and Diversity
Intuitive’s inclusion and diversity (“I&D”) mission is to work to build an environment where every individual can belong and flourish – in our
company and the communities we serve.
We believe that everyone should feel included and fairly treated, and we embrace the unique qualities that make people who they are. This includes all
genders and gender identities, races, ethnicities, ages, national origins, native languages, disabilities, sexual orientations, body sizes, military backgrounds,
cognitive styles, socioeconomic backgrounds, religions, and family structures. We believe an inclusive environment promotes the ability to propel
innovation and creativity forward.
We have a four-part strategy to guide our I&D efforts: promoting an inclusive experience, where employees from all backgrounds feel welcome,
supported, and valued; building a workforce open to the full range of qualified individuals to fuel innovation and better mirror the customers and patients
we serve; continuously investing in and enhancing the fairness of our people practices and sharing progress; and strengthening industry engagement
through collaboration with our customers, the broader healthcare community, and shareholders. We aim to pursue this strategy through various initiatives,
including assessing our efforts through a compliance lens; our policies prohibit unlawful discrimination against individuals on the basis of any protected
characteristic.
Details of our employee workforce composition, including a link to our Employer Information Report (“EEO-1”) submission to the U.S. Equal
Employment Opportunity Commission (“EEOC”), are available on our website. Although we reference the availability of our EEO-1 on our website in this
Annual Report on Form 10-K, our EEO-1 and any other materials on our website are not incorporated by reference into this Annual Report on Form 10-K
or any of our other filings under the Securities Act of 1933, as amended, or the Exchange Act. While matters discussed in such EEO-1 and other website
materials may be significant, any significance should not be read as necessarily rising to the level of materiality used for the purposes of our compliance
with the U.S. federal securities laws, even if we use the word “material” or “materiality” or similar language in such materials.
From a governance perspective, maintaining a mix of backgrounds and experience in our Board composition is essential to being able to understand,
represent, and reflect the needs of our diverse stakeholders. Currently, five of our 11 Board members (45%) are women, and five of our 11 Board members
(45%) self-identify as individuals from underrepresented communities (defined as an individual who self-identifies as Black, African American, Hispanic,
Latino, Asian, Pacific Islander, Native American, Native Hawaiian, or Alaska Native, or LGBTQ+).
Health, Safety, and Wellness
The health, safety, and wellness of our employees is a priority in which we continue to invest and expand. We provide our employees and their families
with access to a variety of innovative, flexible, and convenient health and wellness programs. Program benefits are intended to provide protection, peace of
mind, and security, including workplace health and safety best practices integrated into everyday activities and programs that support employee time away
from work, family care, mental health, or financial well-being.
We continue to evolve our programs in an effort to respond to the interests of our changing workforce, as well as the communities in which we operate,
in compliance with government regulations. Each Intuitive location manages overall safety with guidance based on regional, country, and local regulations
and best practices.
Compensation and Benefits
We provide compensation and benefits programs to help meet the needs of our employees. In addition to base compensation, these programs, which
vary by country and region, include short-term incentives in the form of annual bonuses and commissions, long-term incentives in the form of stock or
cash-based awards, an Employee Stock Purchase Plan,
24

-- 25 of 187 --

Table of Contents
retirement savings plans, healthcare, income protection benefits, paid time off, family leave, and family care resources, among many others.
We aim to support fair and equitable pay for our employees. Our executive team and Board strongly support this effort. We regularly review pay for
internal equity, including with regard to race/ethnicity and gender, and to assess the appropriateness of our compensation structure. We also engage outside
counsel to assess compliance with pay equity laws. When we identify potential differences in pay, we research those differences and take actions to resolve
them if we deem appropriate.
We continue to conduct annual pay equity audits for our full-time U.S. workforce, focusing on pay ratios among self-identified gender and
race/ethnicity groups. These audits take into account job roles and locations, among other factors. While many factors can impact compensation, minor
variations may still occur. The data from our 2025 pay equity audit revealed an adjusted pay gap deviation of approximately 0.5% or less for each gender
and race, which we consider to fall within the normal compensation variability range. We are proud to have strong pay practices and policies that have
helped us to achieve this level of pay equity.
Employees are encouraged to share any pay equity concerns with management, Human Resources, or confidentially through our reporting hotline,
including anonymously. Intuitive has a non-retaliation policy for raising any workplace concerns in good faith, including around pay.
Talent Development
At Intuitive, we believe that all employees have the potential to grow. To support this growth, we offer a diverse range of development opportunities
designed to help employees acquire and apply new technical, functional, and leadership skills.
Employee development at Intuitive commences from the first day and includes comprehensive onboarding programs that teach about our business, our
culture, and the skills needed to successfully perform at Intuitive. Subsequently, employees have access to a variety of online learning courses, as well as
classroom and cohort-based programs.
For people leaders, we provide a 12-month, blended learning curriculum, called the Manager Acceleration Program (“MAP”). MAP is delivered
globally and aims to teach our people leaders what it takes to successfully lead and manage at Intuitive. The program covers key leadership expectations as
well as fundamental leadership skills. Additional virtual, instructor-led workshops provide timely classes aimed at assisting leaders with important
employee processes, such as performance and compensation conversations.
Furthermore, our talent development initiatives include various team effectiveness assessments and solutions tailored to meet the needs of our growing
global teams. These solutions range from cross-cultural dexterity programs to assessing and leveraging individual and team strengths. We gather feedback
from our teams annually through our Employee Experience survey, holding leaders accountable for taking action based on the feedback received. In 2025,
Intuitive achieved a 92% employee engagement score, signaling a strong employee commitment to our mission and the work we do each day.
Community Programs
We believe that building connections between our employees, their families, and our communities creates a more meaningful, fulfilling, and enjoyable
workplace. Through our engagement programs, our employees can pursue their interests and hobbies, connect to volunteering and giving opportunities, and
enjoy unique recreational experiences with family members.
The Intuitive Foundation is a nonprofit organization established in 2018 and funded by Intuitive. Since its founding, the Intuitive Foundation has been
dedicated to promoting health, advancing education, and reducing human suffering. The Foundation supports outreach programs financially while we
provide the volunteers and mentors from within our company. Since its inception, we have contributed $240 million to the Intuitive Foundation to fulfill its
mission.
We encourage you to review our 2025 Environmental, Social, and Governance (“ESG”) Report (to be made available in the “About Us — Investors”
section of our website at https://isrg.intuitive.com) for more detailed information regarding our Human Capital programs and initiatives. Although we
reference our ESG Report in this report, the ESG report and any other materials on our corporate website are not incorporated by reference into this Annual
Report or any other filing of the Company under the Securities Act of 1933, as amended, or the Exchange Act. While matters discussed in such ESG
Report and website materials may be significant, any significance should not be read as necessarily rising to the level of materiality used for the purposes of
our compliance with the U.S. federal securities laws, even if we use the word “material” or “materiality” or similar language in such materials.
General
We make our periodic and current reports, including our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-
K, and any amendments to those reports, available free of charge on our website as soon as practicable after such material is electronically filed or
furnished with the Securities and Exchange Commission (the “SEC”).
25

-- 26 of 187 --

Table of Contents
Our website address is www.intuitive.com, and the reports are filed under “SEC Filings” on the Company — Investor Relations portion of our website.
Periodically, we webcast Company announcements, product launch events, and executive presentations, which can be viewed via our Investor Relations
page on our website. In addition, we provide notifications of our material news, including SEC filings, investor events, and press releases as part of our
Investor Relations page on our website. The contents of our website are not intended to be incorporated by reference into this report or in any other report
or document we file, and any references to our website are intended to be inactive textual references only. The SEC maintains an internet site that contains
reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at www.sec.gov. The contents of
these websites are not incorporated into this filing. Further, references to the URLs for these websites are intended to be inactive textual references only.
We operate our business as one segment, as defined by U.S. generally accepted accounting principles. Our financial results for the years ended
December 31, 2025, 2024, and 2023 are discussed in “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations”
and “Item 8. Financial Statements and Supplementary Data” of this Annual Report.
Intuitive Surgical, Inc. was founded in 1995. We are a Delaware corporation with our principal executive offices located at 1020 Kifer Road,
Sunnyvale, California 94086. Our telephone number is (408) 523-2100, and our website address is www.intuitive.com.
26

-- 27 of 187 --

Table of Contents
ITEM 1A. RISK FACTORS
You should consider each of the following risk factors, which could materially affect our business, financial condition, or future results of operations.
Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business,
financial condition, or future results of operations. In addition, the global economic environment may amplify many of these risks.
RISKS RELATING TO OUR BUSINESS
OUR COMMERCIAL LANDSCAPE IS HIGHLY COMPETITIVE, AND CUSTOMERS MAY CHOOSE OUR COMPETITORS’ PRODUCTS
OR SERVICES OR MAY NOT ACCEPT ROBOTIC-ASSISTED MEDICAL PROCEDURES, WHICH COULD RESULT IN REDUCED
REVENUE AND LOSS OF CUSTOMERS.
Robotic-assisted medical procedures with a da Vinci surgical system or Ion endoluminal system are technologies that compete with established and
emerging treatment options in reconstructive medical procedures or disease management. These competitive treatment options include open surgery,
conventional MIS (laparoscopy), drug therapies, radiation treatment, and other emerging diagnostic and interventional surgical approaches. Some of these
procedures are widely accepted in the medical community and, in many cases, have a long history of use. Technological advances could make such
treatment options more effective or less expensive than using our products, which could render our products obsolete or unmarketable. Also, studies could
be published that show that other treatment options are more beneficial and/or cost-effective than robotic-assisted medical procedures. We cannot be certain
that physicians, or their patients, will choose our products to replace or supplement established treatment options or that our products will continue to be
competitive with current or future technologies. For example, in 2023, certain drugs initially approved for use in diabetes patients gained acceptance for use
in weight loss treatment following FDA approvals for weight loss indications. The availability and effectiveness of weight loss drugs have reduced the
number of bariatric procedures performed, including those bariatric procedures performed using our da Vinci surgical system, as some patients reconsider
the surgical treatment option. At this time, it is difficult to predict the long-term commercial impact of these drugs, including their long-term efficacy as
weight loss drugs and potential drawbacks.
Additionally, we currently face, or anticipate facing, competition from companies with products used in open or MIS surgeries, including laparoscopy
and alternative multi-port, single-port, or endoluminal systems. We also compete with companies providing other therapeutic approaches for addressing
target clinical conditions, as well as companies developing diagnostic solutions that could serve as alternatives to current or planned Intuitive offerings.
Companies that have introduced products in the field of robotic-assisted medical procedures, or have made explicit statements about their efforts to enter
the field, include, but are not limited to, the following: Beijing Surgerii Robotics Company Limited; CMR Surgical Ltd.; Distalmotion SA; Harbin Sizhe
Rui Intelligent Medical Equipment Co., Ltd.; Johnson & Johnson; Karl Storz SE & Co. KG; Medicaroid Corporation; Medtronic plc; meerecompany Inc.;
Noah Medical Corporation; Shandong Weigao Group Medical Polymer Company Ltd.; Shanghai Microport Medbot (Group) Co., Ltd.; Shenzhen Edge
Medical Co., Ltd.; and SS Innovations International, Inc. Other companies with substantial experience in industrial robotics could potentially expand into
the field of medical robotics and become competitors. Additionally, we expect increasing competition within China for robotic-assisted systems. We may
not be able to maintain or improve our commercial position against current or potential competitors. Our revenues may be reduced due to pricing pressure
if our competitors develop and market products that are more effective or less expensive than our products. Robotic or other competitors may respond more
quickly to or integrate new or emerging technologies in their product offerings, undertake more extensive marketing campaigns, have access to unique
clinical information to support ongoing product position with customers, have greater financial, marketing, and other resources, or be more successful in
attracting potential customers, employees, and strategic partners. In addition, academic institutions, governmental agencies, and other public and private
research organizations may conduct research, seek patent protection, and establish collaborative arrangements for discovery, research, and marketing of
products similar to ours. These companies and institutions compete with us in recruiting and retaining qualified scientific and management personnel, as
well as in acquiring necessary product technologies. If we are unable to compete successfully, our revenues will suffer, which could have a material adverse
effect on our business, financial condition, or result of operations.
In addition, third-party service providers that service da Vinci surgical system and Ion endoluminal system operators may emerge and compete with us
on price or offerings. To date, substantially all of our customers have sourced services on their systems from us through service contract commitments or
time and materials contracts. Furthermore, there are third-party service providers offering consulting services targeted at analyzing the cost-effectiveness of
hospitals’ robotic-assisted medical programs, including procedures performed, placement of systems, and consumption of instruments and accessories. We
provide similar services and analysis to our customers, but it is difficult to assess the impact that this may have on our business. If we are unable to compete
successfully with any third-party service providers, our revenues may suffer, which could have a material adverse effect on our business, financial
condition, or result of operations.
27

-- 28 of 187 --

Table of Contents
WE ARE SUBJECT TO A VARIETY OF RISKS DUE TO OUR OPERATIONS OUTSIDE OF THE U.S.
We perform research and development activities, manufacture, and distribute our products in OUS markets. Revenue from OUS markets accounted for
approximately 32%, 33%, and 34% of our revenue for the years ended December 31, 2025, 2024, and 2023, respectively. Our OUS operations are, and will
continue to be, subject to a number of risks including:
• the failure to obtain or maintain the same degree of protection against infringement of our intellectual property rights due to differing
intellectual property protection laws in OUS countries from those in the U.S.;
• multiple OUS regulatory requirements that are subject to change and that could impact our ability to manufacture and sell our products;
• changes in tariffs, trade barriers, and regulatory requirements, such as the enactment of tariffs on goods imported into the U.S. including, but
not limited to, potential tariffs on goods imported from Mexico where we manufacture a significant majority of our instruments and
accessories that we sell;
• protectionist laws, policies, and business practices that favor local competitors or lead non-U.S. customers to favor domestic technology
solutions over imports, which could slow our growth, increase our costs, or make our products less competitive in OUS markets;
• local or national regulations that make it difficult or impractical to market or use our products;
• U.S. relations with the governments of the other countries in which we operate;
• the inability or regulatory limitations on our ability to move goods across borders;
• the risks associated with foreign currency exchange rate fluctuations;
• the difficulty in establishing, staffing, and managing OUS operations, including appropriate business procedures and controls and differing
labor relations;
• the expense of establishing facilities and operations in new foreign markets;
• compliance with anti-corruption laws, such as the U.S. Foreign Corrupt Practices Act (“FCPA”), UK Bribery Act of 2010 (“UK Bribery
Act”), and other local laws prohibiting corrupt payments to government officials;
• adherence to antitrust and anti-competition laws; and
• economic weakness, including inflation, or political instability in particular foreign economies and markets, including exposure to a higher
degree of financial risk if we extend credit to customers in these economies.
We have increased, and will continue to increase, our operations in China. There is inherent risk, based on the complex and changing dynamic between
China and the U.S., that political, diplomatic, military, or other events could result in business disruptions, including, but not limited to, increased policy or
regulatory enforcement against companies, tariffs, trade embargoes, or export restrictions. Tariffs increase the cost of our products and the components and
raw materials that go into making them. These increased costs adversely impact the gross margin that we earn on our products. Tariffs can also make our
products more expensive for customers, which could make our products less competitive when compared to those products offered by domestic companies
and reduce consumer demand. Countries may also adopt other measures, such as controls on imports or exports of goods, technology, or data, which could
adversely impact our operations and supply chain and limit our ability to offer our products and services as designed. These measures can require us to take
various actions, including changing suppliers and restructuring business relationships. Changing our operations in accordance with new or changed trade
restrictions can be expensive, time-consuming, disruptive to our operations and distracting to management. Such restrictions can be announced with little or
no advance notice, and we may not be able to effectively mitigate all adverse impacts from such measures. Political and policy uncertainty surrounding
trade and other bilateral and multilateral issues could also have a negative effect on consumer confidence and spending. Additionally, our joint venture
works with and relies on a number of dealers, distributors, and other third parties to commercialize and deliver our products. Any of these events could
reduce customer demand, increase the cost of our products and services, or otherwise have a materially adverse impact on our customers’ and suppliers’
businesses or results of operations.
For example, in 2020, the U.S. government amended the Entity List rules to expand the requirement to obtain a license prior to the export of certain
technologies. In addition, in 2020, a new U.S. regulation sought to prohibit the U.S. government from contracting directly with companies that use the
products or services of certain Chinese companies in the provision of their services to the U.S. government. This regulation was then expanded to prohibit
companies contracting with the U.S. government from using the products or services of certain Chinese companies anywhere in their operations. Based on
our current understanding of these regulations, they do not materially adversely impact our business at this time. However, we cannot predict the impact
that additional policy, legislative, or regulatory changes may have on our business in the future. These actions or similar actions may result in retaliatory
policies and regulations promulgated in China that could adversely affect our business operations in China or may otherwise limit our ability to offer our
products and services in China and other parts of the world.
28

-- 29 of 187 --

Table of Contents
In China, we have seen increasing competition in the robotic-assisted surgical system industry from domestic companies as well as a sustained broader
central government focus on anti-corruption and systematic governance. For example, in July 2023, the Chinese government launched an anti-corruption
and systematic governance campaign targeting the healthcare sector. This campaign resulted in heightened scrutiny by medical institutions with respect to
initiating tenders, with some tenders being canceled or delayed without a timeline. The extent and impact of this campaign on our business remains
uncertain. In 2025, the effects of this campaign, combined with the competitive dynamics in China and various measures related to industrial policy,
contributed to fewer systems being placed in China than we anticipated. Currently, the extent and impact of this campaign and the competitive dynamics in
China on our business remains uncertain.
The UK is in the process of overhauling its medical device regulatory framework following its departure from the European Union (“EU”). The UK
regulatory framework will apply in Great Britain only, as Northern Ireland continues to follow the EU Medical Devices Regulation (“MDR”). New post-
market surveillance requirements took effect on June 16, 2025, while a draft of additional rules governing device classification and pre-market approval
pathways are expected to be published in 2026. The divergence of the new UK rules from EU law could adversely affect or delay our ability to obtain
approval for our medical device products in the UK. In addition, any delays in implementation, changes in interpretation, or additional requirements under
the new UK regime could adversely affect our ability to market and service our products in Great Britain, which could have adverse impacts on our
business.
The U.S. federal government has made changes to the U.S. trade policy, including entering into a successor to the North American Free Trade
Agreement (“NAFTA”), known as the United States-Mexico-Canada Agreement (“USMCA”), effective as of July 1, 2020. In addition, during 2025, the
U.S. federal government imposed new tariffs on imports from various countries including Mexico, Germany, and China, among others. Such tariffs and, if
enacted, any further legislation or actions taken by the U.S. federal government that restrict trade, such as additional tariffs, trade barriers, and other
protectionist or retaliatory measures taken by governments in other countries, including reciprocal tariffs, limitations on government procurement, or
technology export restrictions, could adversely impact our global operations and our ability to sell products and services in our OUS markets. Tariffs could
increase the cost of our products and the components and raw materials that go into making them. These increased costs could adversely impact the gross
margin that we earn on our products, which could make our products less competitive and reduce consumer demand. Countries may also adopt other
protectionist measures that could limit our ability to offer our products and services, which could increase uncertainties and associated risks relating to our
global operations. The ultimate impact of any tariffs will depend on various factors, including if any tariffs are ultimately implemented, the timing of
implementation, and the amount, scope, and nature of the tariffs.
More generally, several governments, including the U.S., have raised the possibility of policies to induce “re-shoring” of supply chains, less reliance on
imported supplies, and greater national production. Examples include potential “Buy America” requirements in the U.S. If such steps by local governments
triggered retaliation in other markets restricting access to foreign products in purchases by their government-owned healthcare systems, the result may have
an adverse impact on our business, financial condition, or result of operations.
In certain markets, our OUS sales are denominated in U.S. dollars. As a result, an increase in the value of the U.S. dollar relative to foreign currencies
could make our products less competitive and/or less affordable in those OUS markets.
If we are unable to meet and manage these risks noted above, our OUS operations may not be successful, which would limit the growth of our business
and could have a material adverse effect on our business, financial condition, or result of operations.
WE ARE SUBJECT TO LITIGATION, INVESTIGATIONS, AND OTHER LEGAL PROCEEDINGS RELATING TO OUR PRODUCTS,
CUSTOMERS, COMPETITORS, AND GOVERNMENT REGULATORS THAT MAY ADVERSELY AFFECT OUR BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
We are, and may become, subject to various legal proceedings and claims that arise in or outside the ordinary course of business. Certain current
lawsuits and pending proceedings to which we are party, including purported class actions, product liability litigation, and patent litigation, are described in
Note 8 to the Consolidated Financial Statements included in Part II, Item 8.
In particular, our business exposes us to significant risks of patent claims, product liability claims, and competition claims (including antitrust claims),
many of which are common in the medical device industry. For example, product liability claims have been brought against us by, or on behalf of,
individuals alleging that they have sustained personal injuries and/or death as a result of purported product defects, the alleged failure to warn, and/or the
alleged inadequate training by us of physicians regarding the use of our products. The individuals who have brought the product liability claims seek
recovery for their alleged personal injuries and, in many cases, punitive damages. Product liability claims have resulted in negative publicity regarding our
Company, and ongoing or future product liability or negligence claims or product recalls could also harm our reputation. Refer to our risk factor titled
“Negative publicity, whether accurate or inaccurate, concerning our products or our company could reduce acceptance of our products and could result in
decreased product demand and reduced revenues” for additional
29

-- 30 of 187 --

Table of Contents
risks related to the potential effects of negative publicity on our business. Also, antitrust claims have been brought against us by third parties looking to
compete in the instruments or servicing space and by certain customers.
The outcome of these product liability claims and other legal proceedings cannot be predicted with certainty. We purchase and maintain business
insurance for certain liabilities and self-insure our product liability claims through a fronting policy. We cannot determine whether our existing business
insurance program would be sufficient to cover the costs or potential losses related to our lawsuits and legal proceedings or otherwise be excluded under
the terms of any insurance policy. Additionally, regardless of merit, litigation may be time-consuming and disruptive to our operations and cause significant
legal costs (including settlements, judgments, legal fees, and other related defense costs) and diversion of management attention. We could also be subject
to governmental investigations in connection with some of these and other claims. If we do not prevail in these legal proceedings, we may be faced with
significant monetary damages or injunctive relief against us that could have a material adverse effect on our business, financial condition, or results of
operations.
WE OFFER USAGE-BASED ARRANGEMENTS, INCLUDING ALTERNATIVE CAPITAL ACQUISITION APPROACHES; AS A RESULT,
WE ARE EXPOSED TO AN INCREASED RISK OF LOSSES OF REVENUE AND INCREASED CREDIT RISK, WHICH COULD
ADVERSELY AFFECT OUR BUSINESS, FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
We are increasingly offering usage-based arrangements as part of our business model. As a result, we are exposed to an increased risk of losses of
revenue in any period where the usage decreases. Moreover, our pricing is generally set based on the expected usage of the technology. Therefore, if
utilization of our technology falls short of the anticipated levels, we may not be able to recover the costs associated with the technology, which could
adversely affect our business, financial condition, or results of operations.
We believe customer financing through leasing is an important consideration for some of our customers and have experienced an increase in demand
for customer financing. Lease financing arrangements have the effect of reducing cash flows at lease commencement and, instead, spread them over the life
of the lease term, which increases the time taken to recover our product costs and can impact our liquidity. We may experience losses from a customer’s
failure to make payments according to the contractual lease terms. Our exposure to the credit risks relating to our lease financing arrangements may
increase if our customers are adversely affected by changes in healthcare laws, coverage, and reimbursement, economic pressures or uncertainty, or other
customer-specific factors. Although we have programs in place that are designed to monitor and mitigate the associated risks, there can be no assurance
that such programs will be effective in reducing credit risks relating to these lease financing arrangements. If the level of credit losses we experience in the
future exceeds our expectations, such losses could have a material adverse effect on our financial condition or results of operations.
In addition to fixed-payment leases, we lease our systems to certain qualified customers where the lease payments are based on their usage of the
systems. If customers do not perform a sufficient number of procedures on our systems leased under usage-based arrangements, it could impact our
profitability on those arrangements and our overall results of operations. Moreover, the usage of those systems and related billings could vary from quarter
to quarter, which could result in higher variability in our revenue under those arrangements, including a significant reduction in revenue if the usage ends,
fluctuations in our gross profit margins if utilization is different than our expectations, and unpredictable cash flows. Moreover, there is risk in forecasting
future utilization of a system and, therefore, we may not set our usage-based rates high enough to maintain our gross profit margins. Additionally, certain
leasing arrangements allow customers to cancel, return, or upgrade the systems leased prior to the end of the lease term without incurring a financial
penalty, which could have a material adverse effect on our business, financial condition, or results of operations. If systems that are not fully depreciated
are returned, we could incur additional losses, as we may not be able to recover the remaining value of those returned assets, thereby negatively impacting
our financial results.
While leases, including usage-based arrangements, enable our customers to upgrade and get access to new technologies faster, it may also enable
competitors to more easily induce customers to switch to such competitors’ systems. Furthermore, depending on the timing and terms of the upgrade
transaction, the amount of revenue generated on the initial and upgraded lease arrangements may not, in the aggregate, generate the same amount of
revenue that a traditional sale and trade-in transaction would.
OUR RELIANCE ON SOLE- AND SINGLE-SOURCED SUPPLIERS AND ABILITY TO PURCHASE AT ACCEPTABLE PRICES A
SUFFICIENT SUPPLY OF MATERIALS COULD HARM OUR ABILITY TO MEET PRODUCT DEMAND IN A TIMELY MANNER OR
WITHIN BUDGET.
The manufacture of our products requires the timely delivery of a sufficient amount of quality components and materials and is highly exacting and
complex, due in part to complex trade and strict regulatory requirements. Some of the components necessary for the assembly of our products are currently
provided to us by sole-sourced suppliers or single-sourced suppliers due to, among other things, quality considerations, unique intellectual property
considerations, or constraints associated with regulatory requirements. We generally purchase components through purchase orders rather than long-term
supply agreements
30

-- 31 of 187 --

Table of Contents
and generally do not maintain large volumes of components within our inventory. While alternative suppliers exist and could be identified for single-
sourced components, the disruption or termination of the supply of components, or inflationary pressure in our supply chain, could cause a significant
increase in the costs of these components, which could affect our operating results. Certain of our sole-sourced suppliers or single-sourced suppliers could
be adversely affected by the macroeconomic conditions. A disruption or termination in the supply of components could also result in our inability to meet
demand for our products, which could harm our ability to generate revenues, lead to customer dissatisfaction, and damage our reputation and our brand.
Furthermore, if we are required to change the manufacturer of a key component of our products, we may be required to verify that the new manufacturer
maintains facilities and procedures that comply with quality standards and with all applicable regulations and guidelines. The time and processes associated
with the verification of a new manufacturer could delay our ability to manufacture our products on schedule or within budget, which may have a material
adverse impact on our business, financial condition, or results of operations.
In addition, our ability to meet customers’ demands depends, in part, on our ability to timely obtain an adequate delivery of quality materials, parts,
and components from our suppliers. An information technology systems interruption, including cyberattacks, could adversely affect the ordering,
distribution, and manufacturing processes of our suppliers. Furthermore, the prices of commodities and other materials used in our products, which are
often volatile and outside of our control, and may be subject to tariffs, could adversely impact our supply. Current supply chain constraints include
difficulties in obtaining a sufficient supply of specific component materials impacted by evolving trade requirements and certain subcontract suppliers
being operationally challenged to meet our production requirements. For example, in 2025, the Chinese government announced export controls and
licensing requirements applicable to certain products containing Chinese-origin rare earth elements and may implement additional controls in the future.
Rare earth elements are critical to certain components contained in our products, and China is a predominant producer of these materials. If implemented in
their current or a similar form, these measures may require us to obtain export licenses for certain of our products, and we may further experience supply
chain disruptions as a result of limited availability of critical materials and minerals due to the restrictions. If such supply chain constraints continue, we
could also fail to meet product demand, which would adversely impact our business, financial condition, or results of operations.
NEW PRODUCT DEVELOPMENTS AND INTRODUCTIONS MAY ADVERSELY AFFECT OUR BUSINESS, FINANCIAL CONDITION,
OR RESULTS OF OPERATIONS.
We develop and introduce new products with enhanced features and extended capabilities from time to time. We may introduce new products that
target different customers than what our existing products target. The success of new product introductions depends on a number of factors including, but
not limited to, timely and successful research and development, regulatory clearances, approvals, or certifications, establishment or maintenance of
intellectual property rights, pricing, competition, consumer acceptance, effective forecasting and management of product demand, inventory levels,
management of manufacturing costs and capacity, management of supply costs, including mitigation of unforeseen supply chain disruptions for materials
and components, and the risk that new products may have quality or other defects in the early stages of introduction.
We invest substantially in various research and development projects to expand our product offerings. Our research and development efforts are critical
to our future success, and such research and development projects may not be successful. We may be unable to successfully develop and market new
products, and the products we invest in and develop may not be well-received by customers or meet our expectations. Our research and development
investments may not contribute to our future operating results for several years or ultimately generate significant operating income, and such future
contributions may not meet our expectations or even cover the costs of such investments. In addition, the introduction or announcement of new products or
product enhancements may shorten the life cycle of our existing products or reduce the demand for our current products, thereby offsetting any benefits of
successful product introductions and potentially leading to challenges in managing our inventory of existing products.
Our products are subject to various regulatory processes, and we must obtain and maintain regulatory approvals and certifications in order to sell our
new products. If a potential purchaser believes that we plan to introduce a new product in the near future or is located in a country where a new product that
we have introduced has not yet received regulatory clearance or certification, planned purchases may be deferred or delayed. In the past, we have
experienced a slowdown in the demand for existing products in advance of new product introductions, and we may experience a slowdown in such demand
in the future as well. It is also possible that a new product introduction could cause downward pressure on the prices of our existing products or require us
to change how we sell our products, either of which could have material adverse effects on our revenues.
If we fail to effectively develop new products and manage new product introductions in the future, our business, financial condition, or results of
operations could be adversely impacted.
31

-- 32 of 187 --

Table of Contents
WE MAY ENCOUNTER MANUFACTURING PROBLEMS OR DELAYS THAT COULD RESULT IN LOST REVENUE.
Manufacturing our products is a complex process. We (or our critical suppliers) may encounter difficulties in scaling up or maintaining production of
our products, including:
• problems involving production yields;
• quality control and assurance;
• component supply shortages;
• import or export restrictions on components, materials, or technology;
• shortages of qualified personnel; and
• compliance with state, federal, and foreign regulations.
If demand for our products exceeds our manufacturing capacity, we could develop a substantial backlog of customer orders. If we are unable to
develop or maintain larger-scale manufacturing capabilities or build new manufacturing capabilities or facilities on schedule or within budget, our ability to
generate revenue and maintain gross profit margins as expected will be limited and our reputation in the marketplace could be damaged, all of which may
have a material adverse impact on our business, financial condition, or results of operations.
In addition, as we build new facilities for manufacturing capacity, the development of these facilities is subject to risks relating to our ability to
complete our projects on schedule or within budget. Refer to our risk factor titled “We are subject to risks associated with real estate construction and
development” for additional risks related to building our new manufacturing facilities.
Also, after new manufacturing facilities are completed, we may encounter difficulties transferring our production lines from our existing facilities to
the new facilities, which require qualification, validation, and regulatory approval and is subject to all of the risks highlighted above. Moreover, certain new
manufacturing facilities are in foreign countries and in locations where we have not previously had manufacturing sites, both of which could increase the
risks related to transferring our production lines. The facility transfers may require an increase in safety stock inventory to support the production line
transfers, create a substantial backlog of customer orders, or increase costs while the production lines mature, all of which may have a material adverse
impact on our business, financial condition, or results of operations.
WE EXPECT GROSS PROFIT MARGINS TO VARY OVER TIME, AND CHANGES IN OUR GROSS PROFIT MARGINS COULD
ADVERSELY AFFECT OUR BUSINESS, FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
Our gross profit margins have fluctuated from period to period, and we expect that they will continue to fluctuate in the future. Our gross profit
margins may be adversely affected by numerous factors, including:
• changes in customer, geographic, or product mix, including the mix of systems sold or leased;
• changes in the mix of fixed-payment or usage-based operating lease arrangements;
• changes in the portion of sales involving a trade-in of another system and the amount of trade-in credits given;
• our introduction of new products, which may have lower margins than our existing products;
• our inability to maintain or reduce production costs;
• changes in our pricing strategy;
• fluctuations in foreign currency exchange rates;
• competition;
• changes in production volume driven by demand for our products;
• changes in material, labor, or other manufacturing-related costs, including the impact of foreign exchange rate fluctuations for foreign
currency-denominated costs;
• changes to U.S. and foreign trade policies, such as the enactment of tariffs on goods imported into the U.S. including, but not limited to,
potential tariffs on goods imported from Mexico where we manufacture a significant majority of our instruments and accessories that we sell;
• inventory obsolescence, which may result from maintaining significant inventories of raw materials, components, and finished goods;
• product recall charges; and
• market conditions.
32

-- 33 of 187 --

Table of Contents
If we are unable to offset the unfavorable impact of the factors noted above by increasing the volume of products shipped, reducing product
manufacturing costs, or otherwise, our business, financial condition, or results of operations may be adversely affected.
MACROECONOMIC CONDITIONS COULD MATERIALLY ADVERSELY AFFECT OUR BUSINESS, FINANCIAL CONDITION, OR
RESULTS OF OPERATIONS.
Macroeconomic conditions, such as inflationary pressure, changes to monetary policy, elevated interest rates, volatile currency exchange rates, credit
and sovereign debt concerns, concerns about slowed growth in China and other OUS markets, decreasing consumer confidence and spending, including
capital spending, the introduction of or changes in tariffs or trade barriers, and global or local recessions can adversely impact demand for our products,
which could negatively impact our business, financial condition, or results of operations. Recent macroeconomic conditions have been adversely impacted
by geopolitical instability and military hostilities in multiple geographies (including the conflict between Russia and Ukraine and conflicts in the Middle
East, including Israel and Iran), monetary and financial uncertainties, and the COVID-19 pandemic.
The results of these macroeconomic conditions, and the actions taken by governments, central banks, companies, and consumers in response, have
previously resulted in, and may again in the future result in, higher inflation in the U.S. and globally, which could, in turn, lead to an increase in costs and
may cause changes in fiscal and monetary policy, including increases in interest rates. Other adverse impacts of recent macroeconomic conditions have
been, and may continue to be, supply chain constraints, logistics challenges, liquidity concerns in the broader financial services industry, and fluctuations in
labor availability.
We have experienced, and may continue to experience, supply chain constraints due to the current supply chain environment, including difficulties
obtaining a sufficient supply of specific component materials used in our products. If interest rates remain elevated, access to credit may become more
difficult, which may result in the insolvency of key suppliers, including single-source suppliers, which would exacerbate supply chain challenges.
Cybersecurity breaches also remain a threat to our sustained supply continuity. Such supply chain constraints could cause us to fail to meet product
demand, which could result in deferred or canceled procedures.
Adverse developments that affect financial institutions, transactional counterparties, or other third parties, or concerns or rumors about these events,
have in the past led to, and may in the future lead to, market-wide liquidity problems. For example, in 2023, Silicon Valley Bank (“SVB”) was closed by
the California Department of Financial Protection and Innovation. Similarly, other institutions have been, and may continue to be, swept into receivership.
Uncertainty over liquidity concerns in the broader financial services industry may have unpredictable impacts to our business and our industry.
In a higher inflationary environment, we may be unable to raise the prices of our products and services sufficiently to keep up with the rate of inflation.
Impacts from inflationary pressures could be more pronounced and materially adversely impact aspects of our business where revenue streams and cost
commitments are linked to contractual agreements that extend further into the future, as we may not be able to quickly or easily adjust pricing, reduce costs,
or implement countermeasures. A higher inflationary environment can also negatively impact raw material, component, and logistics costs that, in turn,
may increase the costs of producing and distributing our products.
Furthermore, hospitals and distributors may choose to postpone or reduce spending due to financial difficulties or difficulties in obtaining credit to
finance purchases of our products due to elevated interest rates and restraints on credit. Hospitals and distributors may also be adversely affected by
liquidity concerns in the broader financial services industry, as described above, that could result in delayed access or loss of access to uninsured deposits
or loss of their ability to draw on existing credit facilities involving a troubled or failed financial institution. Certain hospitals have experienced, and may
continue to experience, financial and operational pressures as a result of staffing constraints, other labor-related pressures, the supply chain environment, a
decrease in government funding in healthcare, and elevated inflation, which could impact their ability to access capital markets and other funding sources,
increase the cost of funding, or impede their ability to comply with debt covenants, all of which could impede their ability to provide patient care and
impact their profitability. To the extent that hospitals face financial pressures, delayed access or loss of access to uninsured deposits, delayed access or loss
of ability to draw on existing credit facilities, reductions in government spending, or higher interest rates, hospitals’ ability or willingness to spend on
capital equipment may be adversely impacted, all of which could have a material adverse effect on our business, financial condition, or results of
operations. Additionally, with economic uncertainty, an increase in unemployment rates, and increasing health insurance premiums, co-payments and
deductibles may result in cost-conscious consumers pursuing fewer elective surgical procedures, which, in turn, could adversely affect procedure volumes
and system demand.
We are unable to predict the impact of efforts by central banks and federal, state, and local governments to combat elevated levels of inflation. If their
efforts to create downward pressure on inflation are too aggressive, they may lead to a recession. Alternatively, if they are insufficient or are not sustained
long enough to bring inflation to lower, more acceptable levels, hospitals’ ability or willingness to spend on capital equipment may be impacted for a
prolonged period of time. If a recession
33

-- 34 of 187 --

Table of Contents
occurs, economies weaken, or inflationary trends continue, our business and results of operations could be materially adversely affected.
INFORMATION TECHNOLOGY SYSTEM FAILURES, CYBERATTACKS, OR DEFICIENCIES IN OUR CYBERSECURITY COULD
HARM OUR BUSINESS, CUSTOMER RELATIONS, FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
Our information technology systems are critical to the success of our products, help us operate effectively and efficiently, interface with customers,
maintain our supply chain and manufacturing operations, maintain financial accuracy and efficiency, and help us produce our Annual Report on Form 10-K
and other filings with the Securities and Exchange Commission. If we do not allocate and effectively manage the resources necessary to build and sustain
the proper information technology infrastructure, we could be subject to transaction errors, processing inefficiencies, loss of existing customers, difficulties
in attracting new customers, business operation disruptions, diversion of the attention of management and key information technology resources, security
breaches, or the unauthorized access to, loss of, or damage to intellectual property, confidential information, or personal information. Our information
technology systems, and those of our third-party service providers, strategic partners, and other contractors or consultants, are vulnerable to attack, damage,
or interruption from a variety of sources. These sources include computer viruses and malware (e.g., ransomware), malicious code, hacking, cyberattacks,
phishing attacks and other social engineering schemes, employee theft or misuse, human error, fraud, natural disasters, terrorism, war, telecommunication
and electrical failures, denial or degradation of service attacks, sophisticated nation-state and nation-state-supported actors, or unauthorized access or use
by persons inside our organization, or persons with access to systems inside our organization. Cyberattacks and other security breaches or disruptions
continue to increase in frequency, sophistication, and intensity and are becoming increasingly difficult to detect for periods of time, especially as they relate
to attacks on third-party providers or their vendors. Such attacks are often carried out by motivated and highly skilled actors, who are increasingly well-
resourced. Techniques used to compromise or sabotage systems, including the use of advanced technologies, such as machine learning or generative
artificial intelligence (“AI”), change frequently, may originate from less regulated and remote areas of the world, may be difficult to detect, and generally
are not recognized until after they are launched against a target. As a result, we may be unable to anticipate these techniques or implement adequate
preventative measures. If our information technology systems, or those of our critical third-party vendors, do not effectively and securely collect, store,
process, and report relevant data for the operation of our business, our ability to effectively plan, forecast, and execute our business plan and comply with
applicable laws and regulations could be impaired. Any such impairment could materially and adversely affect our financial condition, results of
operations, and the timeliness with which we report our internal and external operating results.
Our business requires us to use and store confidential information, including customer, employee, and business partner personal information, as well as
other proprietary information and business data. We have implemented various controls, systems, and processes intended to secure our information
technology systems and the information on it. We also have programs in place to detect, contain, and respond to data security incidents, and we make
ongoing improvements to our information-sharing products designed to minimize vulnerabilities. However, we cannot guarantee that these measures will
be effective or that attempted security breaches or disruptions would not be successful or damaging to our information technology systems and information.
These security measures may be compromised as a result of security breaches by unauthorized persons, employee error, malfeasance, faulty password
management, or other irregularity and result in persons obtaining unauthorized access to our data or accounts. Third parties may attempt to fraudulently
induce employees or customers into disclosing usernames, passwords, or other sensitive information or otherwise attempt to hack into our information
technology systems to obtain personal data relating to patients or employees, our confidential or proprietary information, or confidential information we
hold on behalf of third parties. In addition, with the prolific use of AI technologies, there is an increased risk of unauthorized or accidental disclosure. For
example, our employees, third-party service providers, strategic partners, or other contractors or consultants may input inappropriate or confidential
information into an AI system (in particular, a system that is managed, owned, or controlled by a third party), thereby compromising our business
operations. Even if the vulnerabilities that may lead to the foregoing are identified, we may be unable to adequately investigate or remediate due to
attackers increasingly using tools and techniques that are designed to circumvent controls, avoid detection, and remove or obfuscate forensic evidence. The
occurrence of any of these events may cause business operation disruptions, diversion of the attention of management and key information technology
resources, and possibly lead to security breaches of, or the unauthorized access to, our confidential information or other business data. If the unauthorized
persons successfully hack into or interfere with our connected products or services, they may create issues with product functionality that could pose a risk
of the loss of data, a risk to patient safety, and a risk of product recall or field action, which could adversely impact our business and reputation. We may
also face increased cybersecurity risks due to our reliance on internet technology and the number of our employees who are working remotely, which may
create additional opportunities for cybercriminals to exploit vulnerabilities.
As described above, we also rely on external vendors to supply and/or support certain aspects of our information technology systems. The systems of
these external vendors may contain defects in design or other problems that could unexpectedly compromise the security of our own information
technology systems and information, and we are dependent on
34

-- 35 of 187 --

Table of Contents
these third parties to deploy appropriate security programs to protect their systems. In addition to potential exposure to data breaches, security and
cybersecurity incidents, or other actions that may compromise the security of or interfere with the function of our systems, defects or vulnerabilities in the
software or systems of our external vendors may expose failures in our internal controls and risk management processes, which may adversely impact our
business, financial condition, or results of operations and may also harm our reputation, brand, and customer relationships.
While, to date, no cyberattacks or security breaches and incidents have had a material impact on our operations or financial results, if such an event
were to occur, it could impair our ability to attract and retain customers, impact the price of our stock, materially damage commercial relationships, and
expose us to litigation or government investigations, which could result in penalties, fines, or judgments against us. The costs to us to eliminate or alleviate
network security problems, bugs, viruses, worms, ransomware and other malicious software programs, and security vulnerabilities could be significant. Our
efforts to address these problems may not be successful and could result in unexpected interruptions, delays, cessation of service, and harm to our business
operations. Moreover, if a security breach affects our systems or results in the unauthorized release of personal information, our reputation and brand could
be materially damaged, and use of our products and services could decrease. We would also be exposed to a risk of loss, litigation and potential liability,
and regulatory scrutiny, which could have a material adverse impact on our business, financial condition, or results of operations.
Furthermore, we may implement changes to information technology systems that could have significant impacts on our manufacturing, sales, and
finance functions, among other teams. These impacts may include, but are not limited to, (i) operational disruptions resulting from the slow adaptation of
the new information technology systems by employees, whether due to inadequate training or resistance to change, or data loss during the transition to the
updated information technology system, including critical customer data, or improper planning leading to the loss of essential software features needed for
specific business requirements; (ii) inaccurate financial reporting due to inaccurate data transfer or technical issues; (iii) financial losses due to system
failures or cost overruns; (iv) security risks involving potential data breaches, unauthorized access, or loss of sensitive information; (v) compliance risks
arising should the updated technology fail to meet regulatory requirements or industry standards; and (vi) strategic risks if the technology implementation
fails to deliver the expected benefits.
While we maintain cyber insurance coverage that is intended to address data security risks, such insurance coverage may be insufficient to cover all
losses or claims that may arise.
IF OUR PRODUCTS DO NOT ACHIEVE AND MAINTAIN CUSTOMER ACCEPTANCE, WE WILL NOT BE ABLE TO GENERATE THE
REVENUE NECESSARY TO SUPPORT OUR BUSINESS.
The da Vinci surgical systems, Ion endoluminal system, and many of our other products represent a novel and advanced approach to performing
medical procedures. Achieving and maintaining physician, patient, and third-party payor acceptance of robotic-assisted medical procedures as a preferred
method of performing these procedures is crucial to our success. If our products fail to achieve or maintain customer acceptance, customers will not
purchase our products, and we will not be able to generate the revenue necessary to support our business. We believe that physicians’ and third-party
payors’ acceptance of the benefits of procedures performed using our products will be essential for acceptance of our products by patients. Physicians will
not recommend the use of our products unless we can demonstrate that they produce results comparable or superior to existing techniques. Even if we can
prove the effectiveness of our products through clinical studies, physicians may elect not to use our products for any number of other reasons. For example,
cardiologists may continue to recommend conventional heart surgery simply because such surgery is already widely accepted. In addition, physicians may
be slow to adopt our products because of the perceived liability risks arising from the use of new products and the uncertainty of reimbursement from third-
party payors, particularly in light of the evolving U.S. healthcare environment.
Broad use of our products requires thorough training of patient care teams on their safe and effective use. We expect that there will continue to be a
learning process involved for such care teams to become proficient in the use of our products. Customer acceptance could be delayed by the time required
to complete this training. We may not be able to rapidly train patient care teams in numbers sufficient to generate adequate demand for our products.
IF HOSPITALS ARE UNABLE TO OBTAIN COVERAGE AND REIMBURSEMENT FOR PROCEDURES USING OUR PRODUCTS, IF
REIMBURSEMENT IS INSUFFICIENT TO COVER THE COSTS OF PURCHASING OUR PRODUCTS, OR IF LIMITATIONS ARE
IMPOSED BY GOVERNMENTS ON THE AMOUNT HOSPITALS CAN CHARGE FOR CERTAIN PROCEDURES, WE MAY BE UNABLE
TO GENERATE SUFFICIENT SALES TO SUPPORT OUR BUSINESS.
In the U.S., hospitals generally bill for the services performed with our products to various third-party payors, such as Medicare, Medicaid, other
government programs, and private insurance plans. If hospitals do not obtain sufficient reimbursement from third-party payors for procedures performed
with our products, or if government and private payors’ policies do not cover surgical procedures performed using our products, we may not be able to
generate the revenues necessary to support our business. In addition, to the extent that there is a shift from inpatient settings to outpatient settings, we may
35

-- 36 of 187 --

Table of Contents
experience pricing pressure and a reduction in the number of procedures performed. Our success in OUS markets also depends on the eligibility of our
products for coverage and reimbursement through government-sponsored healthcare payment systems and third-party payors. Reimbursement practices
vary significantly by country. Many OUS markets have government-managed healthcare systems that control reimbursement for new products and
procedures. Other foreign markets have both private insurance systems and government-managed systems that control reimbursement for new products and
procedures. Acceptance of our products may depend on the availability and level of coverage and reimbursement in a country within a particular time. In
addition, healthcare cost containment efforts similar to those in the U.S. are prevalent in many of the other countries in which we sell, and intend to sell, our
products, and these efforts are expected to continue. Refer to our risk factor titled “Changes in healthcare legislation and policy may have an adverse effect
on our business, financial condition, or results of operations” for additional risks related to the ability of hospitals to obtain reimbursements.
In China, since 2022, several provinces have implemented significant limits on what hospitals can charge patients for surgeries using robotic surgical
technology, including soft tissue surgery. To date, these limits have impacted the number of procedures performed in those provinces as well as pricing of
our instruments and accessories, which have impacted our instruments and accessories revenue. Companies providing robotic surgical technology,
including our joint venture in China, have been meeting with Chinese government healthcare agencies to discuss these developments and to provide
feedback. We cannot assure you that additional provincial or national healthcare agencies and administrations will not impose similar limits, and we expect
to continue to face increased pricing pressure, both of which could further impact the number of procedures performed and our instruments and accessories
revenue in China.
IF OUR PRODUCTS CONTAIN DEFECTS OR ENCOUNTER PERFORMANCE PROBLEMS, WE MAY HAVE TO RECALL OUR
PRODUCTS AND OUR REPUTATION MAY SUFFER.
Our success depends on the quality and reliability of our products. While we subject components sourced and products manufactured to stringent
quality specifications and processes, our products incorporate mechanical parts, electrical components, optical components, and computer software, any of
which may contain errors or exhibit failures, especially when products are first introduced. Component failures, manufacturing flaws, design defects, or
inadequate disclosure of product-related risks with respect to our products could result in an unsafe condition for, injury to, or death of a patient. In
addition, new products or enhancements may contain undetected errors or performance problems that, despite testing, are discovered only after commercial
shipment. Because our products are designed to be used to perform complex medical procedures, due to the serious and costly consequences of product
failure, we and our customers have an increased sensitivity to such defects. In the past, we have voluntarily recalled certain products. Although our
products are subject to stringent quality processes and controls, we cannot provide assurance that our products will not experience component aging, errors,
or performance problems. If we experience product flaws or performance problems, any or all of the following could occur:
• delays in product shipments;
• loss of revenue;
• delay in customer acceptance;
• diversion of our resources;
• damage to our reputation;
• product recalls, including, but not be limited to, product withdrawals from the market, labeling changes, design changes, customer
notifications, and notifications to global regulatory bodies;
• regulatory actions;
• increased service or warranty costs; or
• product liability claims.
Costs associated with defects or performance problems of our products could have a material adverse effect on our business, financial condition, or
results of operations.
WE UTILIZE DISTRIBUTORS FOR A PORTION OF OUR SALES AND SERVICE OF OUR PRODUCTS IN CERTAIN COUNTRIES,
WHICH SUBJECTS US TO A NUMBER OF RISKS THAT COULD HARM OUR BUSINESS, FINANCIAL CONDITION, OR RESULTS OF
OPERATIONS.
We have strategic relationships with several key distributors for the sale and service of our products in certain countries. If these strategic relationships
are terminated and not replaced, our revenues and/or ability to sell or service our products in the markets serviced by these distributors could be adversely
affected. In addition, we may be named as a defendant in lawsuits against our distributors related to sales or service of our products performed by them.
Refer to our risk factor titled “We are subject to litigation, investigations, and other legal proceedings relating to our products, customers, competitors, and
government regulators that may adversely affect our business, financial condition, or results of operations.” Our distributors may affect our ability to
effectively market our products in certain countries or regulatory jurisdictions if a distributor holds the
36

-- 37 of 187 --

Table of Contents
regulatory authorization or certification in such countries or within such regions and causes, by action or inaction, the suspension of such marketing
authorization or certification or sanctions for non-compliance. It may be difficult, expensive, and time-consuming for us to re-establish access or regulatory
compliance in such cases.
THE FAILURE TO ATTRACT AND RETAIN KEY PERSONNEL COULD HARM OUR ABILITY TO COMPETE, AND CHANGES IN OUR
EXISTING LABOR RELATIONSHIPS COULD MATERIALLY ADVERSELY IMPACT OUR BUSINESS, FINANCIAL CONDITION, OR
RESULTS OF OPERATIONS.
We are highly dependent on the principal members of our management and scientific staff. For example, our product development plans depend, in
part, on our ability to attract and retain software, mechanical, electrical, manufacturing, and robotics engineers. Attracting and retaining qualified personnel
is critical to our success, and competition for qualified personnel is intense. We may not be able to attract and retain personnel on acceptable terms given
the constrained labor market and competition for such personnel. Furthermore, as competition intensifies, there is an increased risk that our current or
emerging competitors may attempt to hire our key personnel, which could be achieved through offers of substantial financial incentives or strategic
opportunities, aiming to capitalize on their knowledge to accelerate their own product development initiatives. In addition, many of our tenured employees
are retirement eligible and have significant historical knowledge or expertise that must be transferred to other employees. If we are unable to effectively
safeguard our human capital or mitigate the risks associated with knowledge transfer, our business, financial condition, or results of operations could be
adversely impacted, and there could be a detrimental effect on our competitive position.
Additionally, as a result of any volatility in our stock price, certain long-term incentive benefits, such as stock-based compensation, may be viewed as
having less value and, accordingly, could lead to higher attrition. Moreover, we may also encounter higher costs of labor through recruiting expenses,
wages, retention benefits, or the potential existence of different employee/employer relationships, such as work councils and/or labor unions. We could also
be subject to union or council efforts to organize our employees. These organizational efforts, if successful, decrease operational flexibility and could
adversely affect our operating efficiency. In addition, our response to any organizational efforts could be perceived negatively and harm our business and
reputation.
The extent and duration of the impact of labor market challenges are subject to numerous factors, including the availability of qualified and highly
skilled persons in the markets where we operate and unemployment levels within these markets, behavioral changes, prevailing wage rates, health and other
insurance and benefit costs, inflation, adoption of new or revised employment and labor laws and regulations or government programs, safety levels of our
operations, and our reputation within the labor market.
We believe that a critical contributor to our success has been our corporate culture, which we believe fosters innovation, teamwork, and a focus on
execution, as well as facilitates critical knowledge transfer and knowledge sharing.
INCORPORATING ARTIFICIAL INTELLIGENCE TECHNOLOGIES INTO OUR PRODUCTS, SERVICES, AND OPERATIONS MAY
RESULT IN LEGAL AND REGULATORY RISKS OR HAVE OTHER ADVERSE CONSEQUENCES TO OUR BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
Our current operations, products, and services use AI technologies, including proprietary machine learning and AI algorithms and models. Examples of
our current uses of AI and machine learning include (i) using algorithms to process video and machine data to identify surgical activities and surgical
indicators to support learning, teaching, and practice management, and (ii) using algorithms to support surgical planning and navigation. Future innovations
in our products and services will likely continue to incorporate AI, and these applications may become important in our operations over time, for example,
our development of machine learning-enabled medical devices (“MLMDs”). As with many technological innovations, there are significant risks and
challenges involved in maintaining and deploying these technologies, and there can be no assurance that the usage of such technologies will enhance our
products or services or be beneficial to our business, including our efficiency or profitability.
Our ability to continue to maintain or use such technologies may be dependent on access to specific third-party software and infrastructure, such as
processing hardware, and we cannot control the availability or pricing of such third-party software and infrastructure, especially in a highly competitive
environment. Our products and services may not compete effectively with alternative products and services if we are not able to source and integrate the
latest technologies into our products and services. In addition, several aspects of intellectual property protection in the field of AI are currently under
development, and there is uncertainty and ongoing litigation in different jurisdictions as to the degree and extent of protection warranted for AI
technologies and relevant system input and outputs. If we fail to obtain protection for the intellectual property rights concerning our AI technologies, or
later have our intellectual property rights invalidated or otherwise diminished, our competitors may be able to take advantage of our research and
development efforts to develop competing products, which could adversely affect our business, reputation, financial condition, or results of operations.
Refer to our risk factor titled “If we are unable to fully protect and successfully defend our intellectual property from use by third parties, our ability to
compete may be harmed” for additional risks related to intellectual property.
37

-- 38 of 187 --

Table of Contents
The regulatory landscape surrounding AI is also evolving, and the use of machine learning technologies may expose us to an increased risk of
regulatory enforcement and litigation. As the FDA and other regulatory authorities continue to develop and incorporate such principles into their regulation
of MLMDs, it is possible that medical products using AI and machine learning will become subject to significant additional oversight, including with
respect to premarket review, modification, monitoring, maintenance, and device performance.
In the U.S., legislation related to AI technologies has been introduced at the federal level and has been enacted by various states. At the federal level, in
January 2025, the Trump administration rescinded an executive order relating to the safe and secure development of AI technologies that was previously
implemented by the Biden administration. The Trump administration then issued a new executive order that, among other things, requires certain agencies
to develop and submit to the president action plans to “sustain and enhance America’s global AI dominance,” and to specifically review and, if possible,
rescind rulemaking taken pursuant to the rescinded Biden executive order. Additionally, in December 2025, the Trump administration’s “Ensuring a
National Policy Framework for Artificial Intelligence” Executive Order was signed. This order calls for federal standards and legislation that would
preempt conflicting state AI regulations and create a federal litigation task force focused on challenging state AI laws in court. The Trump administration
may continue to rescind other existing federal orders and/or administrative policies relating to AI technologies or may implement new executive orders
and/or other rule making relating to AI technologies in the future. U.S. states continue to advance a patchwork of AI regulatory frameworks, including
general requirements around transparency, risk-management, and accountability for AI technologies. Several states—such as Colorado, California, and
Connecticut—have enacted or proposed laws governing high-risk AI uses, including rules that address algorithmic discrimination, impact assessments, and
consumer disclosures. A growing subset of these efforts specifically target health-related AI, with states like Illinois and New York adopting provisions that
regulate AI used in clinical decision-support, diagnostics, and other health-related functions, often requiring heightened testing, documentation, or
oversight. Such additional regulations, and uncertainty around their enforceability, may impact our ability to develop, use, and commercialize AI
technologies in the future.
Apart from the U.S., policymakers in key jurisdictions, such as the EU, are actively working on legislation and regulations to encourage the
development and use of ethical and safe AI technologies. For example, the EU Artificial Intelligence Act (“EU AI Act”), entered into force on August 1,
2024, establishes a comprehensive, risk-based governance framework for AI in the EU market. The majority of the substantive requirements of the EU AI
Act will apply from August 2, 2026. The EU AI Act applies to companies that develop, use, and/or provide AI in the EU and, depending on the AI use
case, includes requirements around transparency, conformity assessments and monitoring, risk assessments, human oversight, security, accuracy, general
purpose AI, and foundation models, and fines for breach of up to 7% of worldwide annual turnover. In addition, the revised EU Product Liability Directive
came into force in December 2024, to be implemented into EU member state national law by December 2026. This Directive extends the EU’s existing
strict product liability regime to AI technologies and AI-enabled products, and facilitates civil claims in respect of harm caused by AI. Once fully
applicable, the EU AI Act and the revised EU Product Liability Directives will have a material impact on the way AI is regulated in the EU. Further, in
Europe, we are subject to the General Data Protection Regulation (“GDPR”), which regulates our use of personal data for automated decision making that
results in a legal or similarly significant effect on an individual and provides rights to individuals in respect of that automated decision making. Recent case
law from the CJEU has taken an expansive view of the scope of the GDPR’s requirements around automated decision-making and introduced uncertainty
in the interpretation of these rules. The EU AI Act and developing interpretation and application of the GDPR in respect of automated decision-making,
together with developing guidance and/or decisions in this area, may affect our use of AI technologies and our ability to provide, improve, or
commercialize our business, require additional compliance measures and changes to our operations and processes, result in increased compliance costs and
potential increases in civil claims against us, and could adversely affect our business, financial condition, or results of operations.
Other jurisdictions where we operate have already or are also expected to introduce guidelines and regulations around the use of AI within the next few
years. The cost to comply with such laws, regulations, decisions, and/or guidance interpreting existing laws, or to adjust our business plans based on
changes to how such laws are enforced, could be significant and would increase our operating expenses (such as by imposing additional reporting
obligations regarding our use of AI technologies). Such an increase in operating expenses, as well as any actual or perceived failure to comply with such
laws and regulations, could adversely affect our business, financial condition, and results of operations.
A breach or failure in our security measures could occur from a variety of circumstances and events, including third-party action, employee negligence
or error, malfeasance, computer viruses, cyberattacks, or ransom-related attacks by computer hackers, failures during the process of upgrading or replacing
software and databases, power outages, hardware failures, telecommunication failures, user errors, or catastrophic events, and any of the foregoing events
could have a material adverse effect on our business, financial condition, or results of operations. For more information on risks associated with the
processing of confidential and sensitive information, including personal information, refer to our risk factor titled “Information technology system failures,
cyberattacks, or deficiencies in our cybersecurity could harm our business, customer relations, financial condition, or results of operations.”
38

-- 39 of 187 --

Table of Contents
Though we have taken steps to be thoughtful in our development, training, implementation, and use of AI and machine learning technologies,
including taking steps to comply with the laws and frameworks discussed above that are currently in effect, our AI and machine learning-related processing
could pose certain risks to our customers, including patients, clinicians, and healthcare institutions, and it is not guaranteed that regulators will agree with
our approach to limiting these risks or to our compliance more generally. Risks can include, but are not limited to, the potential for errors or inaccuracies in
the algorithms or models used by the MLMDs, the potential for bias or inaccuracies in the data used to train the MLMDs, the potential for improper
processing of personal information that could lead to deprecation of our algorithms, and the potential for cybersecurity breaches that could compromise
patient data or device functionality. Such risks could negatively affect the performance of our products, services, and business, as well as our reputation and
the reputations of our customers, and we could incur liability through the violation of laws or contracts to which we are a party or civil claims.
NEGATIVE PUBLICITY, WHETHER ACCURATE OR INACCURATE, CONCERNING OUR PRODUCTS OR OUR COMPANY COULD
REDUCE ACCEPTANCE OF OUR PRODUCTS AND COULD RESULT IN DECREASED PRODUCT DEMAND AND REDUCED
REVENUES.
There have been reports and articles published questioning patient safety and efficacy associated with robotic-assisted surgery with da Vinci surgical
systems, their cost relative to other disease management methods, and the adequacy of surgeon training. Negative publicity, including statements made by
public officials, whether accurate or inaccurate, concerning our products or our Company could reduce acceptance of our products and could result in
decreased product demand and a decline in revenues. In addition, significant negative publicity could result in an increased number of product liability
claims, regardless of whether these claims are meritorious. The number of claims could be further increased by plaintiffs’ law firms that use a wide variety
of media to advertise their services and solicit clients for product liability cases against us.
WE COULD BE SUBJECT TO SIGNIFICANT, UNINSURED LOSSES, WHICH MAY HAVE A MATERIAL ADVERSE IMPACT ON OUR
BUSINESS, FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
For certain risks, we do not maintain insurance coverage due to cost and/or availability. For example, we self-insure our product liability risks. We also
indemnify our directors and officers for third-party claims but do not carry insurance beyond basic Side A liability coverage to cover that indemnity or the
related underlying potential losses. Furthermore, we do not carry, among other types of coverage, earthquake insurance. In the future, we may not continue
to maintain certain existing insurance coverage or adequate levels of coverage. Premiums for many types of insurance have increased significantly in recent
years and, depending on market conditions and our circumstances, certain types of insurance, such as directors’ and officers’ insurance, may not be
available in the future on acceptable terms or at all. Because we retain some portion of our insurable risks and, in some cases, we are entirely self-insured,
unforeseen or catastrophic losses in excess of insurance coverage could require us to pay substantial amounts, which may have a material adverse impact
on our business, financial condition, or results of operations.
WE EXPERIENCE LONG AND VARIABLE CONTRACTING CYCLES AND SEASONALITY IN OUR BUSINESS, WHICH MAY CAUSE
FLUCTUATIONS IN OUR FINANCIAL RESULTS.
The contracting cycle of our systems is lengthy, because the systems are major capital items and their purchase generally requires the approval of
senior management of hospitals, their parent organizations, purchasing groups, and/or government bodies. In addition, sales to some of our customers are
subject to competitive bidding or public tender processes. These approval and bidding processes can be lengthy. As a result, hospitals may delay or
accelerate system purchases in conjunction with the timing of their capital budget timelines. Further, IDN groups are creating larger networks of system
users with increasing purchasing power and are increasingly evaluating their robotic-assisted programs to optimize the efficiency of medical procedures
using our systems. Also, the introduction of new products could adversely impact our contracting cycle as customers take additional time to assess the
benefits and costs of such products. As a result, it is difficult for us to predict the length of contracting cycles and, therefore, the exact timing of capital
sales. Historically, placements of our da Vinci surgical systems have tended to be heavier in the fourth quarter and lighter in the first quarter, as hospital
budgets are reset.
We have experienced higher procedure growth for a number of benign conditions, including cholecystectomies, hernia repairs, hysterectomies, and
certain other surgeries. Many of these types of surgeries may be postponed in the short term by patients to avoid vacation periods and for other personal
scheduling reasons. Patients may also accelerate procedures to take advantage of insurance funding cut-off dates. Historically, we have experienced lower
procedure volume growth from the prior quarter in the first and third quarters of the year and higher procedure volume growth from the prior quarter in the
second and fourth quarters of the year. The timing of procedures and changes in procedure growth directly affect the timing of instruments and accessories
and capital purchases by customers.
The above factors may contribute to substantial fluctuations in our quarterly operating results. Because of these fluctuations, it is possible that, in
future periods, our operating results will fall below the expectations of securities analysts or investors. If that happens, the market price of our stock would
likely decrease. These fluctuations, among other factors, also mean that our operating results in any particular period may not be relied upon as an
indication of future performance.
39

-- 40 of 187 --

Table of Contents
THIRD PARTIES MAY OFFER TO SELL REMANUFACTURED OR UNAUTHORIZED INSTRUMENTS AND ACCESSORIES TO OUR
CUSTOMERS OR PROVIDE UNAUTHORIZED SERVICE ON OUR SYSTEMS, WHICH COULD ADVERSELY IMPACT SAFETY, OUR
FINANCIAL RESULTS, AND OUR REPUTATION.
A significant portion of our revenue is generated through sales of instruments and accessories. Third parties have offered, and may continue to offer,
customers counterfeit instruments and accessories and/or instruments and accessories that have been remanufactured and/or are unauthorized, including
instruments that have been remanufactured to support the use of some of our limited-use instruments beyond their labeled useful life. As of the filing date,
we are aware that the FDA has granted 510(k) clearance for the remanufacturing of certain of these instruments for use with our da Vinci Si, da Vinci X,
and da Vinci Xi surgical systems. Additionally, third parties have provided, and may continue to provide, unauthorized service and maintenance on our da
Vinci surgical systems and Ion endoluminal system.
While we generally do not approve the use by our customers of unauthorized and unapproved instruments and accessories that lack FDA clearance or
other applicable regulatory approval or certification with our systems or the unauthorized service or maintenance on our systems, such activities could
potentially result in reduced revenue, increased patient safety risks, and negative publicity for us if these products cause injuries and/or do not function as
intended when used, any of which could have a material adverse effect on our business, financial condition, or results of operations. In addition, we may be
subject to laws that regulate or attempt to regulate the manner in which third-party instruments and accessories or third-party service providers interact with
our systems, and such laws could also negatively impact our business, financial condition, or results of operations.
OUR BUSINESS IS SUBJECT TO COMPLEX AND EVOLVING LAWS AND REGULATIONS REGARDING DATA PRIVACY, DATA
PROTECTION, ARTIFICIAL INTELLIGENCE, AND RESPONSIBLE USE OF DATA, AND ANY FAILURE TO COMPLY MAY RESULT IN
SIGNIFICANT LIABILITY, NEGATIVE PUBLICITY, AND/OR EROSION OF TRUST, WHICH MAY ADVERSELY AFFECT OUR
BUSINESS, FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
In connection with running our business, we receive, store, use, and otherwise process information that relates to individuals and/or constitutes
“personal data,” “personal information,” “personally identifiable information,” or similar terms under applicable data privacy laws. There are numerous
laws and regulations that govern the personal data Intuitive generates, collects, shares, and processes on behalf of itself and/or its customers. In addition to
U.S. federal and state privacy laws, there are various comprehensive privacy laws across the globe that we are or may become subject to and that impact
our business whether related to customers, employees, products, clinical trials, recruitment, or product research and development. All of these laws and
regulations necessitate significant expenditures and resources. We may be subject to significant consequences, including penalties, fines, restrictions on
processing personal information, and/or reputational harm for a data breach or failure to comply with such legal requirements.
For example, in the EU, the GDPR requires controllers and processors of data relating to an identifiable living individual or “personal data” to adhere
to certain key principles whenever accessing or processing personal data. The GDPR imposes comprehensive data privacy compliance obligations in
relation to our collection and use of personal data, including a principle of accountability and the obligation to demonstrate compliance through policies,
procedures, training, and audit, as well as regulating cross-border transfers of personal data out of the EEA and the UK. Among other requirements, the
GDPR regulates transfers of personal data subject to the GDPR to third countries that have not been found to provide adequate protection to such personal
data, including the United States, and the efficacy and longevity of current transfer mechanisms between the EEA and the United States remains uncertain.
The GDPR provides that EEA member states may, in some circumstances, make their own laws that are more restrictive or prescriptive than GDPR, as has
occurred in France and Germany. Failure to comply with the requirements of the GDPR and the applicable EEA member state laws may result in
significant fines, regulatory investigations, reputational damage, orders to cease/change our data processing activities, enforcement notices, assessment
notices (for a compulsory audit), and/or civil claims (including class actions). Compliance with data protection obligations imposed by the GDPR and EEA
member state laws may be onerous and adversely affect our business, financial condition, or results of operations.
We are subject to the privacy laws in our direct and indirect markets including, but not limited to, South Korea, Japan, Taiwan, India, Brazil, Canada,
and the UK.
In the U.S., HIPAA imposes privacy, security, and breach notification obligations on covered entities and their business associates to ensure the
confidentiality, integrity, and availability of individually identifiable health information. Entities that are found to be in violation of HIPAA, as a result of a
breach of unsecured protected health information, a complaint about privacy practices, or an audit by the U.S. Department of Health and Human Services
(“HHS”), may be subject to significant civil, criminal, and administrative fines and penalties and/or additional reporting and oversight obligations if they
are required to enter into a resolution agreement and corrective action plan with HHS through settlement agreements.
Further, in the U.S., when HIPAA does not apply, according to the Federal Trade Commission (the “FTC”), violating consumers’ privacy rights or
failing to take appropriate steps to keep consumers’ personal information secure may constitute
40

-- 41 of 187 --

Table of Contents
unfair and/or deceptive acts or practices in violation of Section 5(a) of the FTC Act. Additionally, federal and state consumer protection laws are
increasingly being applied by the FTC and states’ attorneys general to regulate the collection, use, storage, and disclosure of personal information, through
websites or otherwise, and to regulate the presentation of website content.
At the state level, multiple states have comprehensive consumer privacy laws enacted. Notably, the California Consumer Privacy Act, as amended by
the California Privacy Rights Act (“CCPA”) gives California residents expanded rights to access, correct, and delete their personal information, opt out of
certain personal information sharing, and receive detailed information about how their personal information is used. The CCPA allows for significant fines
by the California attorney general as well as a private right of action from individuals in relation to certain security breaches. Similar laws have been
enacted in other states and are continuing to be proposed at the state and federal level, reflecting the continuing trend toward more stringent privacy
legislation in the U.S. These developments are increasing our compliance obligations and risk, including risks of regulatory fines, litigation, and associated
reputational harm.
In China, we are also subject to various aspects of the country’s data compliance regime, including the Cybersecurity Law, the Data Security Law, and
the Personal Information Protection Law (“PIPL”). In addition to national laws, regulatory departments, provincial and municipal governments, and Free
Trade Zones are left to identify “important data,” the definitions of which may impact our reporting, data protection, and data transfer obligations. Draft
guidelines related to medical device and equipment data from the State Administration for Market Regulation and other unpublished rules and guidelines
from other regulatory departments may impact Onsite data collection and transfers. With the possibility of more stringent medical data transfer rules in
China, customers’ appetite for our digital products including Onsite, Telepresence, and Case Insights may become impacted in the future.
Any failure, or perceived failure, by us or our vendors to comply with or make effective modifications to our policies or to comply with any federal,
state, or international privacy, data-retention, or data-protection-related laws, regulations, orders, or industry self-regulatory principles could result in
proceedings or actions against us by governmental entities or others, a loss of customer confidence, damage to our brand and reputation, and a loss of
customers, any of which could have an adverse effect on our business. In addition, various federal, state, and foreign legislative or regulatory bodies may
enact new or additional laws and regulations concerning privacy, data-retention, and data-protection issues, including laws or regulations mandating
disclosure to domestic or international law enforcement bodies, which could adversely impact our business or our reputation with customers. For example,
some countries have adopted laws mandating that some personal information regarding customers in their country be maintained solely in their country.
Having to maintain local data centers and redesign products, services, and business operations to limit personal information processing to within individual
countries could increase our operating costs significantly.
The European Strategy for Data includes a collection of laws focused on ensuring fundamental principles (including doing business in an ethical way,
respecting fundamental rights of individuals, not exploiting individuals, and transparency in collection and use of data) are promoted and adhered to in
support of innovation for the benefit of the community. In particular, the AI Act, European Health Data Space Regulation, and Data Act and Data
Governance Acts regulate personal and non-personal data as well as artificial intelligence. These obligations may be interpreted in ways that require us to
modify our business practices and products to maintain compliance, potentially increasing costs and operational complexity.
Moreover, some of the AI features of our products involve, or may involve, the processing of personal data and may be subject to laws, policies, legal
obligations, and codes of conduct related to privacy and data protection, each of which may be interpreted in ways that may affect the way in which we
engage with machine learning and require us to make changes to our business practices and products to comply with such obligations. Our use of AI
technologies may involve the storage and transmission of confidential or sensitive information, including personal information of employees, customers,
and others, as well as protected health information of clients’ patients. In addition, due to the sensitive nature of the information, the security features of our
computers and systems, network, and communications systems infrastructure are critical to the success of our business.
ONGOING AND FUTURE GLOBAL CONFLICTS COULD ADVERSELY AFFECT OUR BUSINESS, FINANCIAL CONDITION, OR
RESULTS OF OPERATIONS.
Disruptions caused by ongoing or future global conflicts, including those resulting from conflicts affecting or in close proximity to countries and
regions in the Middle East, may result in extended lead times, delays in supplier deliveries, and increasing freight costs. The risk of supply disruptions may
further result in delays in the delivery of our products.
Additionally, in February 2022, armed conflict escalated between Russia and Ukraine. Russia’s military actions against Ukraine have resulted in
substantial expansion of sanction programs imposed by the United States, the EU, and other countries against Russia, Belarus, the Crimea Region of
Ukraine, the so-called Donetsk People’s Republic, and the so-called Luhansk People’s Republic. In response, the Russian authorities imposed significant
currency control measures, restrictions on transacting with non-Russian parties, export controls, and other economic and financial restrictions. Related
sanctions, export controls, or other actions that may be initiated by countries including the U.S., the EU, or Russia (e.g., potential cyberattacks,
41

-- 42 of 187 --

Table of Contents
disruption of energy flows, etc.) could adversely affect the global economy, financial markets, energy supply and prices, certain critical materials and
metals, supply chains, and global logistics and could adversely affect our business, financial condition and liquidity, or results of operations.
The length, impact, and outcome of ongoing military conflicts is highly unpredictable and could lead to significant market and other disruptions,
including significant volatility in commodity prices and supply of energy resources, instability in financial markets, supply chain interruptions, political and
social instability, trade disputes or trade barriers, changes in consumer or purchaser preferences, an increase in global shipping expenses, greater volatility
in foreign exchange and interest rates, an increase in cyberattacks and espionage, and other unforeseen business disruptions. The extent and duration of the
military action, sanctions, other consequences, such as restrictions on transactions or banning the export of energy products, including natural gas, and the
resulting market disruptions could be significant and could potentially have substantial impact on the global economy and our business for an unknown
period of time. Impacts to our business may include, but are not limited to, a reduction in procedures performed, reduced demand for our products,
limitations on hospitals’ ability to spend on capital equipment and in healthcare spending in general, and supply disruption. Any such disruption may also
magnify the impact of other risks described in this “Risk Factors” section.
DISRUPTIONS AT THE FDA AND OTHER GOVERNMENT AGENCIES OR NOTIFIED BODIES COULD PREVENT OUR PRODUCTS
FROM BEING CLEARED, CERTIFIED, APPROVED, OR COMMERCIALIZED IN A TIMELY MANNER OR AT ALL, OR COULD
HINDER THEIR ABILITY TO PROCURE OUR PRODUCTS, WHICH MAY ADVERSELY AFFECT OUR BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
Hospitals, health systems, and physicians depend on a number of government agencies and services to effectively deliver healthcare to their patients. A
prolonged government shutdown could impact inspections, regulatory review and certifications, grants, or approvals or could cause other situations that
could impede their ability to effectively deliver healthcare, including attempts to reduce payments and other reimbursements to hospitals by federal
healthcare programs. These situations could adversely affect our customers’ ability to perform procedures with our devices and/or their decisions to
purchase additional products from us.
In addition, the ability of the FDA, foreign authorities, and notified bodies to review and clear, approve, or certify new products can be affected by a
variety of factors, including government budget and funding levels, the ability to hire and retain key personnel and accept the payment of user fees, and
statutory, regulatory, and policy changes. In addition, government funding of government agencies or other activities that fund research and development is
subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies or notified bodies, including a
prolonged government shutdown, may cause significant regulatory delays and, therefore, delay our efforts to seek clearances, approvals, or certifications
from the FDA, foreign authorities, and notified bodies and adversely affect business travel and the import and export of products, all of which could have a
material adverse effect on our business, financial condition, or results of operations. For example, over the last several years, the U.S. government has shut
down several times, and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.
Furthermore, the ability of certain of our government customers to procure our products is subject to appropriations or spending approvals. Accordingly,
government shutdowns or funding interruptions could delay or reduce the ability of these customers to complete purchasing or tender processes for our
systems, potentially affecting the timing or volume of such sales.
In the EU, notified bodies must be officially designated to certify products and services in accordance with the EU MDR. Their designation process,
which is significantly stricter under the EU MDR, has experienced considerable delays in the recent years. Despite the increase in designations, the current
number of notified bodies designated under the EU MDR remains significantly lower than the number of notified bodies designated under the previous
regime. The current designated notified bodies are, therefore, facing a backlog of requests, and review times have lengthened. This situation could impact
our ability to grow our business in the EU and EEA. This situation may also impact the way we are conducting our business in the EU and the EEA and the
ability of our notified body to timely review and process our regulatory submissions and perform its audits.
If a prolonged government shutdown occurs, or if funding shortages, staffing limitations, or similar factors hinder or prevent the FDA or other
regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, such events could significantly impact the ability of
the FDA, other regulatory authorities, or notified bodies to timely review and process our regulatory submissions, which may have an adverse effect on our
business, financial condition or results of operations.
PUBLIC HEALTH CRISES OR EPIDEMIC DISEASES, OR THE PERCEPTION OF THEIR EFFECTS, COULD MATERIALLY
ADVERSELY AFFECT OUR BUSINESS, FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
Our global operations expose us to risks arising from public health crises and outbreaks of epidemic, pandemic, or contagious diseases, such as,
historically, the COVID-19 pandemic, the Ebola virus, Middle East Respiratory Syndrome
42

-- 43 of 187 --

Table of Contents
(MERS), Severe Acute Respiratory Syndrome (SARS), and the H1N1 virus. These public health crises can divert medical resources and priorities toward
disease treatment and adversely affect global economies and financial markets, which can negatively impact the number of procedures performed and our
customers’ capital expenditures. Furthermore, public health crises can cause significant business disruptions, including temporary closures of our facilities
and those of our suppliers, as well as reduced access to customers due to measures like travel restrictions. These impacts can have a material adverse effect
on our business, financial condition, or results of operations.
For example, the COVID-19 pandemic, which first emerged in late 2019, adversely impacted our operations, supply chains, and expenses. These
impacts resulted from a number of impacts and measures, including, but not limited to, healthcare customers diverting resources and priorities towards
disease treatment, hospital staffing shortages and supply chain disruptions that impaired their ability to provide patient care, and precautionary measures
implemented by governments, businesses, and ourselves. Due to these factors, we experienced significant and unpredictable reductions in the demand for
our products as customers delayed or canceled planned procedures and capital expenditures. Furthermore, the COVID-19 pandemic also caused widespread
business disruptions, including travel restrictions, reduced access to our customers, and temporary closures of our facilities and those of our suppliers. For
instance, California, where many of our operations and manufacturing facilities are located, implemented risk-reduction orders that limited our employees’
ability to produce and move products through the supply chain. Such disruptions negatively impacted our business, financial condition, and results of
operations. Similar effects may occur in the event of a resurgence of COVID-19 or the emergence of another public health crisis.
Also, any delays in elective surgeries caused by a public health crisis, outbreak of epidemic, pandemic, or contagious disease may create patient
backlogs. The patients in such backlogs may or may not use our products when their surgeries are ultimately performed.
In addition, public health crises and outbreaks of epidemic, pandemic, or contagious diseases can negatively impact global economies and financial
markets, leading to economic slowdowns or recessions. Such conditions may reduce hospital spending, delay product demand, and increase the risk of
customer payment defaults or agreement terminations due to liquidity constraints or funding issues. These factors create material uncertainties and risks to
our business, financial condition, and results of operations.
IF WE DO NOT SUCCESSFULLY MANAGE OUR COLLABORATION, LICENSING, JOINT VENTURE, STRATEGIC ALLIANCE, OR
PARTNERSHIP ARRANGEMENTS WITH THIRD PARTIES, WE MAY NOT REALIZE THE EXPECTED BENEFITS FROM SUCH
ARRANGEMENTS, WHICH MAY HAVE A MATERIAL ADVERSE EFFECT ON OUR BUSINESS, FINANCIAL CONDITION, OR
RESULTS OF OPERATIONS.
From time to time, we enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances, or partnerships to complement or
augment our research and development, product development, training, procedure development, marketing, and commercialization efforts. For example, in
2016, we entered into an agreement to form the Joint Venture. In 2019, the Joint Venture acquired certain assets related to the da Vinci distribution business
of Chindex, a subsidiary of Shanghai Fosun Pharmaceutical (Group) Co. Ltd. (“Fosun Pharma”), following which the Joint Venture began direct
distribution operations in China. There can also be no assurance that the Joint Venture will not require additional contributions to fund its business, that the
Joint Venture will remain profitable, or that the expected benefits of the acquisition of certain assets of Chindex will be realized. Additionally, there can be
no assurance that we and the Joint Venture can successfully complete any development of robotic-assisted medical devices or that we and the Joint Venture
will successfully commercialize any such products.
Proposing, negotiating, and implementing collaborations, in-licensing agreements, joint ventures, strategic alliances, or partnerships may be a lengthy
and complex process. In addition, other companies, including those with substantially greater financial, marketing, sales, technology, or other business
resources, may compete with us for these opportunities or arrangements. As a result, we may not identify, secure, or complete any such arrangements in a
timely manner, on a cost-effective basis, or on otherwise favorable terms, if it all. There can be no assurance that we will realize the expected benefits from
these alliances. In addition, we may not be in a position to exercise sole decision-making authority regarding any collaboration or other arrangement, which
could create the potential risk of creating impasses on decisions, and our alliances may have economic or business interests that are, or that may become,
inconsistent with our interests. It is possible that conflicts may arise in these relationships, such as conflicts concerning the achievement of performance
milestones or the interpretation of significant terms under any agreement, such as those related to financial obligations, termination rights, or the ownership
or control of intellectual property developed during the collaboration. These alliances can be difficult to manage, given the potentially different interests of
the parties involved, and we could suffer delays in product development or other operational difficulties.
These alliances may also involve significant costs and divert the focus and attention of our management and other key personnel. Any of these
relationships may require us to incur non-recurring and other charges, increase our near- and long-term expenditures, or disrupt our ordinary business
activities. Such arrangements may also expose us to numerous known and
43

-- 44 of 187 --

Table of Contents
unknown risks, including unique risks with respect to the economic, political, and regulatory environment of any foreign entities with whom we partner,
including Fosun Pharma. Any of the foregoing may have a material adverse effect on our business, financial condition, or results of operations.
IF WE FAIL TO SUCCESSFULLY ACQUIRE OR INTEGRATE NEW BUSINESSES, PRODUCTS, AND TECHNOLOGY, WE MAY NOT
REALIZE EXPECTED BENEFITS, OR OUR BUSINESS MAY BE HARMED.
We need to grow our business in response to changing technologies, customer demands, and competitive pressures. In some circumstances, we may
decide to grow our business through the acquisition of complementary businesses, products, or technologies rather than through internal development.
Identifying suitable acquisition candidates can be difficult, time-consuming, and costly, and we may not be able to identify appropriate candidates or
successfully complete identified acquisitions. In addition, completing an acquisition can divert our management and key personnel from our business
operations, which could harm our business and affect our financial results. Even if we complete an acquisition, we may not be able to successfully integrate
newly acquired organizations, products, technologies, or employees into our operations or may not fully realize some of the expected synergies. An
acquired company may have deficiencies in product quality, regulatory marketing authorizations or certifications, or intellectual property protections,
which are not detected during due diligence activities or are unasserted at the time of acquisition. It may be difficult, expensive, and time-consuming for us
to re-establish market access, regulatory compliance, or cure such deficiencies in product quality or intellectual property protection in such cases, which
may have a material adverse impact on our business, financial condition, or results of operations.
Integrating an acquisition can also be expensive and time-consuming and may strain our resources. In many instances, integrating a new business will
also involve implementing or improving internal controls appropriate for a public company at a business that lacks them. In addition, we may be unable to
retain the employees of acquired companies or the acquired company’s customers, suppliers, distributors, or other partners for a variety of reasons,
including that these entities may be our competitors or may have close relationships with our competitors. Furthermore, acquired companies may have less
mature or less sophisticated information technology systems, securities practices, or training, which may result in an increased risk of security and
cybersecurity incidents when such companies are integrated. Failure to successfully integrate our acquisitions may have a material adverse impact on our
business, financial condition, or results of operations.
WE ARE EXPOSED TO CREDIT RISK AND FLUCTUATIONS IN THE MARKET VALUE OF OUR INVESTMENTS.
Our investment portfolio includes both domestic and international investments. The credit ratings and pricing of our investments can be negatively
affected by liquidity concerns, credit deterioration, financial results, economic risk, political risk, or other factors. As a result, the value and liquidity of our
cash equivalents and marketable securities could fluctuate substantially. Our other income and expenses could also vary materially from expectations
depending on gains or losses realized on the sale of investments, impairment charges resulting from revaluations of debt and equity securities and other
investments, changes in interest rates, increases or decreases in cash balances, volatility in foreign exchange rates, and changes in the fair value of
derivative instruments. Increased volatility in the financial markets and overall economic uncertainty could increase the risk that actual amounts realized on
our investments may differ significantly from the fair values currently assigned to them.
The value of our investments may also decline due to instability in the global financial markets, which may reduce the liquidity of securities included
in our portfolio. For example, the closure of SVB and other institutions swept into receivership created bank-specific and broader financial institution
liquidity risk and concerns. We maintain the majority of our cash and cash equivalents in accounts with major U.S. and multi-national financial institutions,
and our deposits exceed insured limits. Future adverse developments with respect to these financial institutions or the broader financial services industry
may impair our ability to access the capital needed to support near-term working capital needs, whether from our existing investment and deposit accounts
and credit facilities or otherwise, and may lead to market-wide liquidity shortages and create additional market and economic uncertainty. Any decline in
available funding or access to our cash and liquidity resources could also result in breaches of our financial and/or contractual obligations.
Our two Intuitive Ventures funds invest in early-stage companies, which involve substantial risks and uncertainties. These risks and uncertainties
include, among other things, uncertainties inherent in research and development; uncertainties regarding the ability of Intuitive Ventures to identify
investment candidates; uncertainties regarding the success of Intuitive Ventures’ investments; uncertainties and variables inherent in the operating and
financial performance in investments made, including, among other things, competitive developments and general economic, political, business, industry,
regulatory, and market conditions; future exchange and interest rates; and changes in tax and other laws, regulations, rates, and policies.
There can be no assurance that we will realize a positive return on our strategic investments. Further, if we invest in privately held companies,
valuations of such companies are inherently complex due to the lack of readily available market data.
44

-- 45 of 187 --

Table of Contents
If we determine that our investments in privately held companies have experienced a decline in value, we may be required to record impairments, which
could be material and have an adverse effect on our results of operations.
While we have not realized any significant losses on our cash equivalents, marketable securities, or other investments, future fluctuations in their value
could have a material adverse impact on our business, financial condition, or results of operations.
CHANGES IN TAX LAWS OR EXPOSURE TO ADDITIONAL TAX LIABILITIES MAY ADVERSELY AFFECT OUR BUSINESS,
FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
We are subject to taxes in the U.S. and other jurisdictions around the world. Tax rates in these jurisdictions may be subject to significant change due to
economic and/or political conditions. A number of other factors may also impact our financial results, including:
• the jurisdictions in which profits are determined to be earned and taxed;
• the resolution of issues arising from tax audits with various tax authorities;
• changes in the valuation of our deferred tax assets and liabilities;
• changes in the availability of tax credits and tax deductions;
• changes in share-based compensation or our stock price; and
• changes in tax laws or the interpretation of such tax laws.
We are unable to predict what changes to the tax laws of the U.S. and other jurisdictions may be enacted in the future or what effect such changes
would have on our business, including tax law changes resulting from the base erosion and profit shifting (“BEPS”) project and the Two Pillar Solution
undertaken by the Organization for Economic Co-operation and Development (“OECD”), which includes a global minimum tax rate. Many countries have
adopted new tax laws to align with the global minimum tax. These changes could increase tax uncertainty and may adversely impact our provision for
income taxes. Any significant increase in our future effective tax rate could have a material adverse impact on our business, financial condition, or results
of operations.
WE ARE SUBJECT TO RISKS ASSOCIATED WITH REAL ESTATE CONSTRUCTION AND DEVELOPMENT.
The development of our facilities is subject to risks relating to our ability to complete our projects on schedule or within budget. Factors that may
result in a development project being prevented or delayed from completion or exceeding budget include, but are not limited to (i) construction delays due
to labor challenges, poor weather, defects, or cost overruns, which may increase project development costs; (ii) cost escalations associated with materials,
including changes in availability, proximity, and cost of materials, such as steel, cement, concrete, aggregates, oil, fuel, and other construction materials,
including potential risks arising from geopolitical conflicts, changes in U.S. trade policies and retaliatory responses from other countries, changes in foreign
exchange rates, as well as cost escalations associated with subcontractors and labor; (iii) the discovery of hazardous or toxic substances, or other
environmental, culturally-sensitive, or related issues; (iv) an inability to obtain, or a significant delay in obtaining, zoning, construction, occupancy, and
other required governmental permits and authorizations; (v) difficulty in complying with local, city, county, and state rules and regulations regarding
permitting, zoning, subdivision, utilities, and water quality, as well as federal rules and regulations regarding air and water quality and protection of
endangered species and their habitats; (vi) insufficient infrastructure (e.g., water, sewer, and roads) capacity or availability to serve the needs of our
projects; (vii) failure to achieve or sustain anticipated occupancy levels; (viii) condemnation of all or parts of development or operating properties, which
could adversely affect the value or viability of such projects; and (ix) natural disasters and other extreme weather conditions, including, but not limited to,
hurricanes, tornadoes, earthquakes, wildfires, or flooding.
CLIMATE CHANGE, NATURAL DISASTERS, OR OTHER EVENTS BEYOND OUR CONTROL COULD DISRUPT OUR BUSINESS,
FINANCIAL CONDITION, OR RESULTS OF OPERATIONS.
Natural disasters, terrorist activities, and other events beyond our control including, but not limited to, internet security threats and violence motivated
by political or social causes, could adversely affect our business, financial condition, or results of operations. Moreover, global climate change could result
in certain types of natural disasters occurring more frequently or with more intense effects. The impacts of climate change may include physical risks (such
as frequency and severity of extreme weather conditions), social and human effects (such as population dislocations or harm to health and well-being),
compliance costs, transition risks, shifts in market trends, and other adverse effects. Such impacts may disrupt parties in our supply chain, our customers,
and our operations. For example, the March 2011 earthquake and tsunami in Japan, and their aftermath, created economic uncertainty and disrupted
economic activities in Japan, including a reduction in hospital spending. More recently in September and October
2024, Hurricane Helene and Hurricane Milton caused economic uncertainty and business disruptions in the Southeast region of the U.S.
45

-- 46 of 187 --

Table of Contents
Physical risks associated with climate change are subject to shifting societal, regulatory, and political focus in the U.S., the EU, and globally. Shifts in
weather patterns caused by climate change are expected to increase the frequency, severity, or duration of certain adverse weather conditions and natural
disasters, such as hurricanes, tornadoes, earthquakes, wildfires, droughts, extreme temperatures, or flooding, which could cause more significant business
and supply chain interruptions, damage to our products and facilities as well as the infrastructure of hospitals, medical care facilities, and other customers,
reduced workforce availability, increased costs or reduced supply of raw materials and components, increased liabilities, and decreased revenues than what
we have experienced in the past from such events. The geographic location of our California headquarters and many of our global manufacturing facilities,
as well as the facilities of certain of our key suppliers and service providers, subject them to the risk of natural disasters. If a major earthquake, wildfire, or
other natural disaster were to damage our facilities or the facilities of our suppliers and service providers, or impact the ability of our employees or the
employees of our suppliers and service providers to travel to their workplace, we may experience potential impacts ranging from production and shipping
delays to lost revenues and increased costs, which could harm our business. Moreover, periods with increased extreme weather, floods, or drought and
associated wildfire danger may increase the probability of power outages in the communities where we work and live. For example, electric utilities in
certain areas where we operate have previously used planned power outages in response to wildfire risks. If prolonged or frequent, such blackouts could
impact our operations and the operations of our suppliers and service providers. We do not have multiple-site capacity for all of our operations in the event
of a business disruption, and we are predominantly self-insured and may not be able to sufficiently cover losses or additional expenses that we may sustain.
Furthermore, the impacts of global climate change on water resources may result in water scarcity, which could impact our ability to access sufficient
quantities of water in certain locations and result in increased costs.
In addition, as ESG-related laws continue to evolve in scope and complexity, we may need to change the processes by which we currently operate our
business and manage our supply chain to comply with these evolving legal and regulatory requirements, which, in turn, may have a material adverse effect
on our business, financial condition, or results of operations. If such laws or regulations are more stringent than current legal or regulatory requirements, we
may experience increased compliance burdens and costs to meet our regulatory obligations. For example, policymakers in various jurisdictions (including
the EU and the State of California) have adopted or are considering adopting requirements for companies to make disclosures or take additional actions,
including value chain diligence, related to various ESG matters. These laws are not always consistent, and, in some instances, other policymakers have
taken actions to constrain companies’ consideration of such matters, which increases the complexity and cost of compliance. Advocates and opponents of
various ESG matters are increasingly turning to activism, including litigation or media campaigns, to advance their positions. Our approach to such matters
continues to evolve, and any failure to successfully navigate regulatory requirements or stakeholder expectations could result in a loss of market access or a
decline in our success in competitive bidding or public tender processes, reputational harm, fines and other sanctions, or other adverse impacts to our
business.
CONSOLIDATION IN THE HEALTHCARE INDUSTRY COULD HAVE AN ADVERSE EFFECT ON OUR BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
The healthcare industry has been consolidating, and organizations continue to consolidate purchasing decisions for many of our healthcare provider
customers. Numerous initiatives and reforms by legislators, regulators, and third-party payers to curb the rising cost of healthcare have catalyzed a
consolidation of aggregate purchasing power within the markets in which we sell our products. As the healthcare industry consolidates, competition to
provide products and services is expected to continue to intensify, resulting in pricing pressures and decreased average selling prices. In addition, for
smaller hospitals or groups that do not consolidate with larger networks, these entities may face increasing cost and/or competitive pressures, which could
impact their ability to purchase additional products and services from us or make contractual payments over time. We expect that market demand,
government regulation, third-party payor coverage and reimbursement policies, government contracting requirements, new entrants, technology, and
societal pressures will continue to change the worldwide healthcare industry, resulting in further consolidation, which may exert further downward pressure
on prices of our products and services and may have a material adverse impact on our business, financial condition, or results of operations.
WE USE ESTIMATES, MAKE JUDGMENTS, AND APPLY CERTAIN METHODS IN DETERMINING OUR FINANCIAL RESULTS AND IN
MEASURING THE PROGRESS OF OUR BUSINESS. AS THESE ESTIMATES, JUDGMENTS, AND METHODS CHANGE, OUR RESULTS
OF OPERATIONS AND OUR ASSESSMENT OF THE PROGRESS OF OUR BUSINESS COULD VARY.
The methods, estimates, and judgments we use in applying our accounting policies have a significant impact on our results of operations. Such
methods, estimates, and judgments are, by their nature, subject to substantial risks, uncertainties, and assumptions, and factors may arise over time that may
lead us to change our methods, estimates, and judgments. Changes in any of our assumptions may adversely affect our reported financial results.
We utilize methods for determining surgical opportunity sizes, the number and type (cancerous or benign) of certain procedures performed, and the
installed base of our systems that involve estimates and judgments, which are, by their nature, subject to substantial risks, uncertainties, and assumptions.
Our estimates of surgical opportunity sizes, the number and type of
46

-- 47 of 187 --

Table of Contents
procedures performed, or the installed base of our systems do not have an impact on our results of operations but are used to estimate the progress of our
business. Estimates and judgments for determining surgical opportunity sizes, the number and type of procedures, and the installed base of our systems and
the accuracy of these estimates may be impacted over time with changes in treatment modalities, hospital reporting behavior, system internet connectivity,
distributor reporting behavior, increases in procedures per field employee, and other factors. In addition, from time to time, we may change the method for
determining opportunity sizes, the number and type of procedures, and the installed base of our systems, causing variation in our reporting.
RISKS RELATING TO OUR REGULATORY ENVIRONMENT
COMPLYING WITH FDA AND FOREIGN REGULATIONS IS A COMPLEX PROCESS, AND OUR FAILURE TO FULLY COMPLY COULD
SUBJECT US TO SIGNIFICANT ENFORCEMENT ACTIONS.
Because our products are commercially distributed, numerous quality and post-market regulatory requirements apply, including the following:
• continued compliance with the FDA’s QMSR, which requires manufacturers to follow design, testing, control, documentation, and other
quality assurance procedures during the development and manufacturing process;
• labeling regulations, including the FDA’s general prohibition against false or misleading statements in the labeling or promotion of products
for unapproved or “off-label” uses;
• stringent complaint reporting and Medical Device Reporting regulations, which require that manufacturers keep detailed records of
investigations or complaints against their devices and report to the FDA if their device may have caused or contributed to a death or serious
injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if it were to recur;
• adequate use of the corrective and preventive actions process to identify and correct or prevent significant, systemic failures of products or
processes or in trends that suggest the same; and
• the reporting of corrections, recalls, and removals, which requires that manufacturers report to the FDA recalls and field corrective actions
taken to reduce a risk to health or to remedy a violation of the FFDCA that may pose a risk to health.
We are subject to inspection and marketing surveillance by the FDA to determine our compliance with regulatory requirements. If the FDA finds that
we have failed to comply, it can institute a wide variety of enforcement actions, ranging from inspectional observations (as set forth on FDA Form-483) to
a public Warning Letter to more severe civil and criminal sanctions, including the seizure of our products and equipment or ban on the import or export of
our products. The FDA has, in the past, issued and could, in the future, issue Warning Letters or other adverse communications to us. If we fail to satisfy or
remediate the matters discussed in any such Warning Letters or communications, the FDA could take further enforcement actions, including prohibiting the
sale or marketing of the affected product. Our failure to comply with applicable requirements could lead to an enforcement action that may have an adverse
effect on our financial condition or results of operations. The receipt of a Warning Letter could place certain limits on the ability to obtain FDA-issued
Certificates to Foreign Government (“CFGs”) used for new and re-registration of products in certain other countries.
The FDA also strictly regulates labeling, advertising, promotion, and other activities relating to the marketing of our products. Medical devices may be
promoted only for their cleared or approved indications and in accordance with the provisions of the cleared or approved label. It is possible that federal or
state enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which
could result in significant fines or penalties under a variety of statutory authorities, including under the FFDCA, as well as laws prohibiting false claims for
reimbursement.
In addition, any modification or change of medical devices cleared for the market requires the manufacturer to make a determination whether the
change is significant enough to require new 510(k) clearance. We have created labeling, advertising, and user training for the da Vinci surgical systems to
describe specific surgical procedures that we believe are fully within the scope of our existing 510(k) indications for use stated in our 510(k) clearances.
Although we have relied on expert in-house and external staff, consultants, and advisors we cannot provide assurance that the FDA would agree that all
such specific procedures are within the scope of the existing general clearance. If the FDA or any comparable regulatory authority determines that our
promotion of our products for any such procedures represents promotion of an off-label use, the FDA or such regulator could request that we modify our
labeling or promotional materials, or otherwise subject us to regulatory or enforcement actions, including warning letters, untitled letters, injunctions,
seizures, civil fines, or criminal penalties. In addition, from time to time, we modify our products, including the hardware and software in the da Vinci
surgical systems, after we obtain 510(k) clearance from the FDA for the devices in ways that we do not believe require new 510(k) clearance. We cannot
provide assurance that the FDA would agree in all cases with our determinations not to seek new 510(k) clearance for any of these changes. If the FDA
disagrees with our assessments that a new 510(k) clearance was not required prior to commercializing the devices with
47

-- 48 of 187 --

Table of Contents
these changes or modifications, then the FDA could impose enforcement sanctions, require the recall of any modified products, and/or require us to obtain
510(k) clearance or other FDA marketing authorization before permitting the commercialization of any modified products, and we may be unable to obtain
any such marketing authorizations in a timely manner or at all.
We have a wholly owned manufacturing facility located in Mexicali, Mexico, which manufactures reusable and disposable medical device instruments.
This facility is registered with the FDA as well as with Mexican authorities. The facility is operated under U.S. and international quality system regulations,
including those applicable to Canada, the EU, Brazil, and Japan, among others. This facility has an FDA Establishment Registration but has not been
inspected by the FDA to date. If the FDA were to identify non-conformances in our product documentation or quality system compliance, it could hold
indefinitely the importation of instruments at the border, which would deprive us of the ability to sell and supply the majority of our customers until the
FDA requirements have been satisfied. Similar supply disruptions could occur if key suppliers outside of the U.S. were to encounter non-conformances
with their documentation or quality system compliance.
In the EU, subject to the transitional provisions and in order to sell our products in EU member states, our products must comply with the general
safety and performance requirements of the EU MDR, which repeals and replaces the MDD. Compliance with these requirements is a prerequisite to be
able to affix the CE mark to our products, without which they cannot be sold or marketed in the EU.
All medical devices placed on the market in the EU must meet the general safety and performance requirements laid down in Annex I to the EU MDR,
including the requirement that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its
intended purpose. Medical devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health
of users and – where applicable – other persons, provided that any risks that may be associated with their use constitute acceptable risks when weighed
against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged
state of the art. To demonstrate compliance with the general safety and performance requirements, we must undergo a conformity assessment procedure,
which varies according to the type of medical device and its (risk) classification. A conformity assessment procedure generally requires the intervention of
a notified body. The notified body would typically audit and examine the technical file and the quality system for the manufacture, design, and final
inspection of our devices. If satisfied that the relevant product conforms to the relevant general safety and performance requirements, the notified body
issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE
mark to the device, which allows the device to be placed on the market throughout the EU.
In addition, once our devices are certified under the EU MDR, we must inform the notified body that carried out the conformity assessment of the
medical devices that we market or sell in the EU and the EEA of any planned substantial changes to our quality system or substantial changes to our
medical devices that could affect compliance with the general safety and performance requirements laid down in Annex I to the EU MDR or cause a
substantial change to the intended use for which the device has been CE marked. The notified body will then assess the planned changes and verify whether
they affect the products’ ongoing conformity with the EU MDR. If the assessment is favorable, the notified body will issue a new certificate of conformity
or an addendum to the existing certificate attesting compliance with the general safety and performance requirements and quality system requirements laid
down in the Annexes to the EU MDR. The notified body may disagree with our proposed changes and product introductions or modifications could be
delayed or canceled, which could adversely affect our ability to grow our business.
If we fail to comply with applicable laws and regulations, we would be unable to affix the CE mark to our products, which would prevent us from
selling them within the EU. The aforementioned EU rules are generally applicable in the EEA. Non-compliance with the above requirements would also
prevent us from selling our products in these three countries.
OUR PRODUCTS ARE SUBJECT TO A LENGTHY AND UNCERTAIN DOMESTIC REGULATORY REVIEW PROCESS. IF WE DO NOT
OBTAIN AND MAINTAIN THE NECESSARY DOMESTIC REGULATORY AUTHORIZATIONS, WE WILL NOT BE ABLE TO SELL OUR
PRODUCTS IN THE U.S.
Our products and operations are subject to extensive regulation in the U.S. by the FDA. The FDA regulates the development and clinical testing,
manufacturing, labeling, storage, record keeping, promotion, sales, distribution, and post-market support and medical device reporting in the U.S. to ensure
that medical products distributed domestically are safe and effective for their intended uses. In order for us to market products for use in the U.S., we
generally must first obtain clearance from the FDA pursuant to Section 510(k) of the FFDCA or approval of the product through the PMA pathway.
Clearance under Section 510(k) requires demonstration that a new device is substantially equivalent to another device with 510(k) clearance or
grandfathered (“pre-amendment”) status and for which a PMA is not required. If we develop products in the future that are not considered to be
substantially equivalent to a device with 510(k) clearance or grandfathered status, we may be required to obtain marketing authorization through the more
burdensome PMA process or alternatively through the de novo classification process, which is a path to market for novel devices that are low to moderate
risk and for which a predicate device is not available.
48

-- 49 of 187 --

Table of Contents
Although our current products have generally been cleared through the 510(k) clearance process, we may decide to seek approval for future products
through a PMA submission or through the de novo classification process. A PMA is typically a much more complex, lengthy, and burdensome application
than a 510(k) and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA. In the PMA process, the
FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to,
technical, preclinical, clinical study, manufacturing, and labeling data. The PMA process is typically required for devices that are deemed to pose the
greatest risk, such as life-sustaining, life-supporting, or implantable devices. In the de novo classification process, a manufacturer whose novel device under
the FFDCA would otherwise be automatically classified as Class III and require the submission and approval of a PMA prior to marketing is able to request
down-classification of the device to Class I or Class II on the basis that the device presents a low or moderate risk.
Similarly, although the FDA has a statutory deadline of 120 days to review a de novo submission, in practice, the review may take much longer. In
addition, a PMA application or de novo classification requests generally require the performance of one or more clinical studies. In some cases, such
studies may also be required to support a 510(k) application, and any requirements to conduct clinical studies beyond those we anticipate for our current or
future products could add significantly to our costs and have a material adverse effect on our business.
The FDA may not act favorably or quickly in its review of any marketing application submissions, or we may encounter significant difficulties and
costs in our efforts to obtain marketing authorization from the FDA, either of which could delay or preclude the sale of new products in the U.S. In
addition, the FDA may place significant limitations upon the intended use of our products as a condition of granting marketing authorization. Product
applications can also be denied or withdrawn due to failure to comply with regulatory requirements or the occurrence of unforeseen problems following
marketing authorization. Any delays or failure to obtain FDA marketing authorization for new or modified products that we develop, any limitations
imposed by the FDA on new product use, or the costs of obtaining FDA clearance or approvals could have a material adverse effect on our business,
financial condition, or results of operations.
In addition, the FDA or other regulatory agencies may change their policies, adopt additional regulations, revise existing regulations, or take other
actions that may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently approved or
cleared products on a timely basis. We may be found non-compliant as a result of future changes in, or interpretations of, regulations by the FDA or other
regulatory agencies. For example, on February 2, 2026, the FDA’s final rule implementing the QMSR became effective. The QMSR, which replaces the
FDA’s former Quality System Regulation sets forth the FDA’s current good manufacturing practice requirements for medical devices, and among other
things, incorporates by reference the quality management system requirements of ISO 13485:2016. Although the FDA has stated that the standards
contained in ISO 13485:2016 are substantially similar to those set forth in the QSR, and although we have obtained ISO 13485:2016 certification for our
quality management system, the FDA has indicated that ISO:13485 certification alone will not ensure compliance under the QMSR, nor will ISO
certification exempt manufacturers from FDA inspection. The QMSR also includes certain compliance obligations, such as those relating to unique device
identification, product traceability, and maintenance of complaint and service records, that align more closely with FDA’s existing medical device
requirements than with ISO standards. Accordingly, it remains unclear the extent to which the QMSR may impose additional or different regulatory
requirements on us that could increase the costs of compliance or otherwise negatively affect our business. If we are unable to comply with the QMSR, or
with any other changes in the laws or regulations enforced by FDA or comparable regulatory authorities, we may be subject to enforcement action, which
could have an adverse effect on our business, financial condition, or results of operations.
Additionally, in September 2019, the FDA issued revised guidance describing an optional “safety and performance based” premarket review pathway
for manufacturers of “certain, well-understood device types” to demonstrate substantial equivalence under the 510(k) clearance pathway by showing that
such device meets objective safety and performance criteria established by the FDA, thereby obviating the need for manufacturers to compare the safety
and performance of their medical devices to specific predicate devices in the clearance process. The FDA maintains a list of device types appropriate for
the “safety and performance based” pathway and continues to develop product-specific guidance documents that identify the performance criteria for each
such device type, as well as the recommended testing methods, where feasible. The FDA may establish performance criteria for classes of devices for
which we or our competitors seek or currently have received clearance, and it is unclear the extent to which such performance standards, if established,
could impact our ability to obtain new 510(k) clearances or otherwise create competition that may negatively affect our business.
In order to conduct a clinical investigation involving human subjects for the purpose of demonstrating the safety and effectiveness of a medical device,
a company must, among other things, apply for and obtain IRB approval of the proposed investigation. In addition, if the clinical study involves a
“significant risk” (as defined by the FDA) to human health, the sponsor of the investigation must also submit and obtain FDA approval of an IDE
application. Many of our products to date have been or would be considered significant risk devices requiring IDE approval prior to investigational use. We
may not be
49

-- 50 of 187 --

Table of Contents
able to obtain FDA and/or IRB approval to undertake clinical trials in the U.S. for any new devices that we intend to market in the U.S. in the future.
Even if we obtain such approvals, we may not be able to conduct studies that comply with the IDE and other regulations governing clinical
investigations or the data from any such trials may not support clearance or approval of the investigational device. Clinical testing is difficult to design and
implement, can take many years, can be expensive, and carries uncertain outcomes and, if we fail to complete our planned or ongoing clinical trials or if
such clinical trials produce negative or inconclusive results, we may be delayed or prevented from obtaining regulatory clearances or approvals to
commercialize our products for new or expanded indications. Additionally, we may experience delays in our ongoing clinical trials for any number of
reasons, which could adversely affect the costs, timing, or successful completion of our clinical trials. If we fail to complete our planned and ongoing
clinical trials or if such clinical trials produce negative or inconclusive results, we may be delayed or prevented from obtaining regulatory clearances or
approvals to commercialize our products for new or expanded indications, which may limit demand for our products.
Certainty that clinical trials will meet desired endpoints, produce meaningful or useful data, and be free of unexpected adverse effects or that the FDA
will accept the validity of foreign clinical study data cannot be assured, and such uncertainty could preclude or delay market clearance or authorizations
resulting in significant financial costs and reduced revenue. Failure to obtain such approvals or to comply with such regulations could have a material
adverse effect on our business, financial condition, or results of operations.
OUR PRODUCTS MAY CAUSE OR CONTRIBUTE TO ADVERSE MEDICAL EVENTS OR BE SUBJECT TO FAILURES OR
MALFUNCTIONS THAT WE ARE REQUIRED TO REPORT TO THE FDA AND FOREIGN REGULATORY AUTHORITIES AND, IF WE
FAIL TO DO SO, WE WOULD BE SUBJECT TO SANCTIONS THAT COULD HARM OUR REPUTATION, BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
We are subject to the FDA’s medical device reporting regulations and similar foreign regulations, which require us to report to the FDA and foreign
regulatory authorities when we receive or become aware of information that reasonably suggests that one or more of our products may have caused or
contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious
injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail
to report adverse events of which we become aware within the prescribed time frame. We may also fail to recognize that we have become aware of a
reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the
use of the product. If we fail to comply with our reporting obligations, the FDA or foreign regulatory authorities could take action, including warning
letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance, approval, or
certification, seizure of our products or delay in clearance, approval, or certification of future products.
The FDA and foreign regulatory bodies have the authority to require the recall of commercialized products in the event of material deficiencies or
defects in the design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall
must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall
a product if any material deficiency is found. A government‑mandated or voluntary recall by us could occur as a result of an unacceptable risk to health,
component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects, or other deficiencies or failures to comply
with applicable regulations. Product defects or other errors may occur in the future.
Depending on the corrective action we take to redress a product’s deficiencies or defects, the FDA or foreign regulatory authorities may require, or we
may decide, that we will need to obtain new clearances, approvals, or certifications for the device before we may market or distribute the corrected device.
Seeking such clearances, approvals, or certifications may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not
adequately address problems associated with our devices, we may face additional regulatory enforcement actions, including FDA or foreign regulatory
authorities warning letters, product seizure, injunctions, administrative penalties, or civil or criminal fines.
Companies are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA or foreign regulatory
authorities. We may initiate voluntary withdrawals or corrections for our products in the future that we determine do not require notification of the FDA or
foreign regulatory authorities. If the FDA or foreign regulatory authorities disagree with our determinations, it could require us to report those actions as
recalls, and we may be subject to enforcement actions. A future recall announcement could harm our reputation with customers, potentially lead to product
liability claims against us, and negatively affect our sales. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a
lawsuit, would require the dedication of our time and capital, distract management from operating our business, and may harm our reputation, financial
condition, or results of operations.
50

-- 51 of 187 --

Table of Contents
IF OUR MANUFACTURING FACILITIES DO NOT CONTINUE TO MEET FEDERAL, STATE, OR OTHER MANUFACTURING
REGULATIONS AND STANDARDS, WE MAY BE REQUIRED TO TEMPORARILY CEASE ALL OR PART OF OUR MANUFACTURING
OPERATIONS, IMPORT/EXPORT OF OUR PRODUCTS, AND/OR RECALL SOME PRODUCTS, WHICH COULD RESULT IN
SIGNIFICANT PRODUCT DELIVERY DELAYS AND LOST REVENUE.
Our manufacturing facilities are subject to periodic inspection by regulatory authorities and audit by notified bodies, and our operations will continue
to be regulated and inspected by the FDA and other regulatory agencies and notified bodies for compliance with Good Manufacturing Practice
requirements contained in the QMSR and other regulatory requirements. We are similarly required to comply with ISO quality system standards as well as
EU legislation and norms in order to produce products for sale in the EU. In addition, many countries, such as Canada and Japan, have very specific
additional regulatory requirements for quality assurance and manufacturing. If we fail to continue to comply with Good Manufacturing Practice
requirements, as well as ISO or other regulatory standards, we may be required to cease all or part of our operations until we comply with these regulations.
We continue to be subject to FDA and certain other inspections by other regulatory authorities and notified bodies at any time. Maintaining such
compliance is difficult and costly. We cannot be certain that our facilities will be found to comply with Good Manufacturing Practice requirements or ISO
standards and other regulatory requirements in future inspections and audits by regulatory authorities and notified bodies.
We are currently participating in the Medical Device Single Audit Program (“MDSAP”), which allows an MDSAP-recognized auditing organization to
conduct a single regulatory audit of a medical device manufacturer that evaluates our quality system to assess compliance with the requirements of multiple
regulatory jurisdictions, including the U.S., Japan, Brazil, Australia, and Canada. The information collected in an MDSAP audit is shared and reviewed
amongst all the regulatory authorities participating in the MDSAP, who may or may not determine that additional information or auditing is required.
Our Sunnyvale, California facility is licensed by the State of California to manufacture medical devices. We have been subject to periodic inspections
by the California Department of Health Services Food and Drug Branch and, if we are unable to maintain this license following any future inspections, we
will be unable to manufacture or ship some products, which would have a material adverse effect on our results of operations. In addition, all of our
facilities are subject to periodic inspections by other regulatory bodies, including third-party auditors on behalf of national regulatory authorities.
Compliance with multiple regulatory standards is complex, difficult, and costly to maintain, and material deficiencies could result in significant limitations
on our ability to manufacture, transport, and sell our products in one or more countries.
OUR PRODUCTS ARE SUBJECT TO INTERNATIONAL REGULATORY PROCESSES AND APPROVAL OR CERTIFICATION
REQUIREMENTS. IF WE DO NOT OBTAIN AND MAINTAIN THE NECESSARY REGULATORY REQUIREMENTS, WE WILL NOT BE
ABLE TO SELL OUR PRODUCTS IN OTHER COUNTRIES.
To be able to sell our products in other countries, we must obtain regulatory approvals or certifications and comply with the regulations of those
countries, which may differ substantially from those of the U.S. These regulations, including the requirements for approvals or certifications and the time
required for regulatory review, vary from country to country. Obtaining and maintaining foreign regulatory approvals or certifications is complex, and the
time to obtain clearances or certifications in other countries varies; therefore, we cannot be certain that we will receive regulatory approvals or
certifications in any other country in which we plan to market our products or obtain such approvals or certifications on a favorable schedule. If we fail to
obtain or maintain regulatory approval or certification in any other country in which we plan to market our products, our ability to generate revenue will be
harmed. In particular, if the FDA refuses to provide CFGs, our ability to register products or renew such registrations may be delayed or denied.
In the EU, the EU MDR, which repealed and replaced the MDD, became applicable on May 26, 2021. In accordance with transitional provisions, both
(i) devices lawfully placed on the market pursuant to the EU MDD prior to May 26, 2021, and (ii) legacy devices lawfully placed on the EU market from
May 26, 2021, in accordance with the EU MDR transitional provisions may generally continue to be made available on the market or put into service until
December 31, 2028 (at the very latest and depending on the product risk classification) per the EU MDR extended transitional provisions, provided that the
requirements of the transitional provisions are fulfilled. However, since May 26, 2021, manufacturers must already comply with a number of new, or
reinforced, requirements set forth in the EU MDR, including registration of economic operators and of devices control plan, Periodic Safety Update Report
(“PSUR”), notify body periodic vigilance report, post-market surveillance, clinical periodic review report, and vigilance requirements, such as the Post
Market Clinical Follow-Up (“PMCF”) or Clinical Evaluation Plan (“CEP”). These requirements are in active implementation and may change as the
European Commission adopts additional implementing acts and considers targeted revisions to related medical device rules.
Subject to the transitional provisions, in order to sell our products in EU member states, our products must comply with the general safety and
performance requirements of the EU MDR. Compliance with these requirements is a prerequisite to be able
51

-- 52 of 187 --

Table of Contents
to affix the CE mark to our products, without which they cannot be sold or marketed in the EU. All medical devices placed on the market in the EU must
meet the general safety and performance requirements laid down in Annex I to the EU MDR, including the requirement that a medical device must be
designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. It is the responsibility of the
(manufacturer) Person Responsible for Regulatory Compliance (“PRRC”) to ensure such requirements are fulfilled and in place in the company. Medical
devices must be safe and effective and must not compromise the clinical condition or safety of patients or the safety and health of users and, where
applicable, other persons, provided that any risks that may be associated with their use constitute acceptable risks when weighed against the benefits to the
patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. To
demonstrate compliance with the general safety and performance requirements, we must undergo a conformity assessment procedure, which varies
according to the type of medical device and its (risk) classification and may include a technical documentation assessment and an onsite audit. Except for
low-risk medical devices (Class I), where the manufacturer can self-assess the conformity of its products with the general safety and performance
requirements (except for any parts that relate to sterility, metrology, or reuse aspects), a conformity assessment procedure requires the intervention of a
notified body. The notified body would typically audit and examine the technical file and the quality system for the manufacture, design, and final
inspection of our devices. If satisfied that the relevant product conforms to the relevant general safety and performance requirements and we have the
organizational structure to support it (i.e., PRRC), the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own
declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the
EU. If we fail to comply with applicable laws and regulations, we would be unable to affix the CE mark to our products, which would prevent us from
selling them within the EU or any countries recognizing the CE mark. The aforementioned EU rules are generally applicable in the EEA.
We have gained certification under the EU MDR and, where appropriate, maintained our certificates granted under the former EU MDD for all medical
devices that we intend to continue to market in the EU and EEA.
Further, Switzerland, which is the country from which we import our products into the EU and where our EU regulatory team is based, has not yet
entered into a Mutual Recognition Agreement with the EU that covers the EU MDR and allows medical devices to move freely between Switzerland and
the EU. Therefore, for future needs, we will adjust the manner in which we bring our products into the EU market. Any such adjustments could cause
temporary disruptions in and have adverse financial implications to our business in Europe.
In addition, the EU regulatory landscape concerning medical devices recently evolved and continues to undergo legislative changes. On May 26, 2021,
the EU MDR became applicable and repealed and replaced the EU MDD and the Active Implantable Medical Devices Directive. Unlike directives, which
must be implemented into the national laws of the EU member states, regulations are directly applicable (i.e., without the need for adoption of EU member
state laws implementing them) in all EU member states and are intended to eliminate current differences in the regulation of medical devices among EU
member states. The EU MDR, among other things, is intended to establish a uniform, transparent, predictable, and sustainable regulatory framework across
the EU for medical devices and ensure a high level of safety and health while supporting innovation. These requirements are in active implementation and
may change as the European Commission adopts additional implementing acts and considers targeted revisions to related medical device rules. In addition,
on December 16, 2025, the European Commission published a targeted revision proposal of the EU MDR to address structural issues, certification delays,
and burdens on small and medium-sized enterprises (SMEs). The proposal will enter the ordinary legislative procedure and is not expected to be adopted
before 2027.
In Japan, to date, we received approvals from the Japanese Ministry of Health, Labor and Welfare for our da Vinci Si, Xi, X, 5, and SP surgical
systems and various associated instruments and accessories for use in certain da Vinci procedures. We may seek additional approvals for other products
and/or indications; however, there can be no assurance that such approvals will be granted. In addition, because not all of our instruments have received
product approvals and reimbursement is an additional process to generate commercial acceptance, it is possible that procedures will be adopted slowly or
not at all. Sales of our products depend, in part, on the extent to which the costs of our products are reimbursed by governmental health administration
authorities. There are multiple pathways to obtain reimbursement for procedures including those that require in-country clinical data and which are
considered for reimbursed status in April of even-numbered years. If we are not successful in obtaining the necessary reimbursement approvals or obtaining
approvals for future products and procedures, then the demand for our products could be limited. These limitations could eliminate a significant
opportunity for our products in Japan.
In China, our capital sales are subject to importation authorizations and purchasing tender processes. In June 2023, the China National Health
Commission published the 2023 Quota. Under the original 2023 Quota, the government will allow for the sale of 559 new surgical robots into China, which
could include da Vinci surgical systems as well as surgical systems introduced by others. As of December 31, 2025, including systems that were sold in
prior quarters, we have placed 162 da Vinci surgical systems under the original 2023 Quota and 5 da Vinci surgical systems under special approvals. Our
ability to track the number of systems that could be sold under these quotas in the future is limited by provincial and national agencies
52

-- 53 of 187 --

Table of Contents
making such information publicly available. Future system sales and our ability to grow future procedure volumes are dependent on the completion of these
purchasing tender authorizations. The timing and magnitude of these future authorizations, which may determine our system placements in future years, is
not certain, and we expect to continue to experience variability in the timing of capital sales in China.
CHANGES IN HEALTHCARE LEGISLATION AND POLICY MAY HAVE AN ADVERSE EFFECT ON OUR BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
In the U.S., there have been, and continue to be, a number of legislative initiatives to contain healthcare costs. In March 2010, the ACA was enacted,
which made changes that have impacted and are expected to significantly impact the pharmaceutical and medical device industries.
The ACA contained a number of provisions designed to generate the revenues necessary to fund health insurance coverage expansions among other
things. This included a number of Medicare payment system reforms, including a national pilot program on payment bundling to encourage hospitals,
physicians, and other providers to improve the coordination, quality, and efficiency of certain healthcare services through bundled payment models and
appropriated funding for comparative effectiveness research.
Since its enactment, there have been judicial, executive branch, and Congressional challenges to certain aspects of the ACA. On June 17, 2021, the
U.S. Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of
the ACA. Thus, the ACA will remain in effect in its current form.
In addition, other legislative changes have been proposed and adopted since the ACA became law. These changes included an aggregate reduction in
Medicare payments, which went into effect on April 1, 2013, and will remain in effect through 2032, unless additional Congressional action is taken.
Individual states in the U.S. have also become increasingly active in passing legislation and implementing regulations designed to control product pricing,
including price or patient reimbursement constraints and discounts, and require marketing cost disclosure and transparency measures.
Furthermore, implementation of OBBBA may reduce the number of individuals enrolled in state Medicaid programs and ACA marketplace plans,
which may result in changes in healthcare utilization that may adversely affect demand for our products and services and could have an adverse impact on
our business, financial condition, or results of operations.
We expect additional state and federal healthcare reform measures to be adopted in the future that could have a material adverse effect on our industry
generally and on our customers. Any changes to, or uncertainty with respect to, future reimbursement rates or changes in hospital admission rates could
impact our customers’ demand for our products and services, which, in turn, could have a material adverse effect on our business, financial condition, or
results of operations.
Further, the federal, state, and local governments, Medicare, Medicaid, managed-care organizations, and foreign governments have, in the past,
considered, are currently considering, and may, in the future, consider healthcare policies and proposals intended to curb rising healthcare costs, including
those that could significantly affect both private and public reimbursement for healthcare services. Future significant changes in the healthcare systems in
the U.S. or other countries, including retroactive and prospective rate and coverage criteria changes, competitive bidding or tender processes for certain
products and services, and other changes intended to reduce expenditures along with uncertainty about whether and how changes may be implemented,
could have a negative impact on the demand for our products. We are unable to predict whether other healthcare policies, including policies stemming from
legislation or regulations affecting our business may be proposed or enacted in the future, what effect such policies would have on our business, or what
effect ongoing uncertainty about these matters will have on the purchasing decisions of our customers.
For instance, in December 2021, the EU Regulation No. 2021/2282 on Health Technology Assessment (“HTA”), amending Directive 2011/24/EU, was
adopted. The Regulation entered into force in January 2022 and has been applicable since January 2025, with phased implementation based on the type of
product, e.g., certain high-risk medical devices as of 2026. This Regulation intends to boost cooperation among EU member states in assessing health
technologies, including certain high-risk medical devices, and provide the basis for cooperation at the EU level for joint clinical assessments in these areas.
It will permit EU member states to use common HTA tools, methodologies, and procedures across the EU, working together in four main areas, including
joint clinical assessment of the innovative health technologies with the highest potential impact for patients, joint scientific consultations whereby
developers can seek advice from HTA authorities, identification of emerging health technologies to identify promising technologies early, and continuing
voluntary cooperation in other areas. Individual EU member states will continue to be responsible for assessing non-clinical (e.g., economic, social, ethical,
etc.) aspects of health technology and making decisions on pricing and reimbursement.
53

-- 54 of 187 --

Table of Contents
WE ARE SUBJECT TO FEDERAL, STATE, AND FOREIGN LAWS GOVERNING OUR BUSINESS PRACTICES, WHICH, IF VIOLATED,
COULD RESULT IN SUBSTANTIAL PENALTIES. ADDITIONALLY, CHALLENGES TO, OR INVESTIGATION INTO, OUR PRACTICES
COULD CAUSE ADVERSE PUBLICITY AND BE COSTLY TO RESPOND TO AND, THUS, COULD HARM OUR BUSINESS, FINANCIAL
CONDITION, OR RESULTS OF OPERATIONS.
The Dodd-Frank Wall Street Reform and Consumer Protection Act requires us to track and disclose the source of any tantalum, tin, gold, and tungsten
used in manufacturing that may originate in the Democratic Republic of the Congo or adjoining regions (so called “conflict minerals”). These metals are
central to the technology industry and are present in some of our products as component parts. In most cases, no acceptable alternative material exists that
has the necessary properties that our products require. Because it is not possible to determine the source of the metals by analysis, we must obtain a good
faith description of the source of the intermediate components and raw materials from parties in our supply chain. The components that incorporate those
metals may originate from many sources, and we purchase fabricated products from manufacturers who may have a long and difficult-to-trace supply
chain. As the spot price of these materials varies, producers of the metal intermediates can be expected to change the mix of sources used. Accordingly,
components and assemblies we buy may have a mix of sources as their origin. We are required to carry out a diligent effort to determine and disclose the
source of these materials. There can be no assurance that we can obtain this information accurately or reliably, or at all, from intermediate producers who
may be unwilling or unable to provide this information or further identify their sources of supply or to notify us if these sources change. In addition, these
metals are subject to price fluctuations and shortages that can affect our ability to obtain the manufactured materials that we rely on at favorable terms or
from consistent sources. These changes could have an adverse impact on our ability to manufacture and market our devices and products.
We are subject to healthcare regulation and enforcement by the federal government and the states and foreign governments where we conduct our
business. The healthcare laws and regulations that may affect our ability to operate include the federal Anti-Kickback Statute, which prohibits the payment
of remuneration to induce or reward hospitals, physicians, or other healthcare professionals either to refer patients or to purchase, lease, order, or arrange
for or recommend the purchase, lease, or order of healthcare products or services for which payment may be made under the federal healthcare programs,
such as Medicare, Medicaid, and other third-party payor programs. Further, a person or entity does not need to have actual knowledge of this statute or
specific intent to violate it in order to have committed a violation. Similar laws must be complied with at the state level and in foreign jurisdictions.
We must comply with the federal civil and criminal false claims laws, including the federal False Claims Act, and civil monetary penalties laws, which
prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, claims for payment from Medicare, Medicaid,
or other federal healthcare programs that are false or fraudulent. Although we do not submit claims directly to government payors, manufacturers can be
held liable under the federal False Claims Act if they are deemed to “cause” the submission of false or fraudulent claims by, for example, providing
inaccurate billing or coding information to customers or promoting a product off-label. In addition, the government may assert that a claim including items
or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the False Claims Act.
The Health Insurance Portability and Accountability Act of 1996, which created additional federal criminal statutes prohibit, among other things,
executing a scheme to defraud any healthcare benefit program and making false statements relating to healthcare matters. Similar to the federal Anti-
Kickback Statute, a person or entity does not need to have actual knowledge of the statute or specific intent to violate it to have committed a violation.
These laws may affect our sales, marketing, and other promotional activities by limiting the kinds of financial arrangements that we may have with
hospitals, physicians, or other potential purchasers of our products. They particularly impact how we structure our sales offerings, including discount
practices, customer support, speaker, education, and training programs, physician consulting, and other service arrangements. These laws are broadly
written, and it is often difficult to determine precisely how these laws will be applied to specific circumstances. Violating anti-kickback laws and false
claims laws can result in civil and criminal fines and penalties, which can be substantial and include monetary damages and penalties, imprisonment, and
exclusion from government healthcare programs. Even an unsuccessful challenge or investigation into our practices could cause adverse publicity and be
costly to defend and, thus, could harm our business, financial condition, or results of operations.
The federal Physicians Payments Sunshine Act imposes reporting and disclosure requirements on certain device manufacturers for any “transfer of
value” made or distributed to physicians (including family members), as defined by statute, certain non-physician practitioners, including physician
assistants and nurse practitioners, and teaching hospitals. Such information must be made publicly available in a searchable format. In addition, device
manufacturers are required to report and disclose any ownership or investment interests held by physicians and their immediate family members, as well as
any transfers of value made to such physician owners and investors, during the preceding calendar year. Similar requirements apply in foreign jurisdictions.
Failure to submit required information at the designated times may result in civil monetary penalties for
54

-- 55 of 187 --

Table of Contents
all payments, transfers of value, or ownership or investment interests not reported in an annual submission. Device manufacturers are required to submit
reports to CMS by the 90 day of each calendar year.
Many states have similar laws and regulations, such as anti-kickback and false claims laws, which may be broader in scope and may apply regardless
of payor, in addition to items and services reimbursed under Medicaid and other state programs. Certain states mandate implementation of commercial
compliance programs to ensure compliance with these laws, impose restrictions on device manufacturer marketing practices, and/or require the tracking
and reporting of gifts, compensation, and other remuneration to physicians or marketing expenditures and pricing information. The shifting commercial
compliance environment and the need to build and maintain robust and expandable systems to comply with multiple jurisdictions with different compliance
and/or reporting requirements increases the possibility that a healthcare company may be found out of compliance with one or more of the requirements,
subjecting us to significant civil monetary penalties.
Additionally, to the extent that our product is sold in a foreign country, we may be subject to similar foreign laws.
Compliance with complex foreign and U.S. laws and regulations that apply to our OUS operations increases our cost of doing business in foreign
jurisdictions and could expose us or our employees to fines and penalties in the U.S. and/or abroad. These numerous, and sometimes conflicting, laws and
regulations include U.S. laws, such as the FCPA, and similar laws in other countries, such as the UK Bribery Act. Violations of these laws and regulations
could result in fines, criminal sanctions against us, our officers, or our employees, prohibitions on the conduct of our business, and damage to our
reputation. Although we have implemented policies and procedures designed to ensure compliance with these laws, there can be no assurance that our
employees, contractors, distributors, or other agents will not violate our policies.
Our operations are subject to certain antitrust and competition laws in the jurisdictions in which we conduct our business, in particular the U.S. and the
EU. These laws prohibit, among other things, anticompetitive agreements and practices. If any of our commercial agreements or practices are found to
violate or infringe such laws, we may be subject to civil and other penalties. We may also be subject to third-party claims for damages. Further, agreements
that infringe upon these antitrust and competition laws may be void and unenforceable, in whole or in part, or require modification in order to be lawful and
enforceable. If we are unable to enforce our commercial agreements, whether at all or in material part, our business, financial condition, or results of
operations could be adversely affected.
We are also subject to claims, lawsuits, and government investigations involving labor and employment. Such claims, lawsuits, and government
investigations are inherently uncertain. Regardless of the outcome, any of these types of legal proceedings can have an adverse impact on us because of
legal costs, diversion of management resources, and other factors.
We are also exposed to the risk that our employees, independent contractors, consultants, manufacturers, suppliers, and any other third parties that we
may engage in connection with the development and commercialization of our products may engage in fraudulent or illegal activity. Misconduct by these
parties could include intentional, reckless, and/or negligent conduct or disclosure of unauthorized activities to us that violates: (i) the laws of the FDA and
other similar regulatory authorities, including those laws requiring the reporting of true, complete, and accurate information to such authorities; (ii)
manufacturing standards; (iii) data privacy, security, fraud, and abuse laws and regulations; or (iv) laws that require the true, complete, and accurate
reporting of financial information or data. Activities subject to these laws could also involve the improper use or misrepresentation of information obtained
in the course of clinical trials or the creation of fraudulent data in clinical trials, which could result in regulatory sanctions and cause serious harm to our
reputation. It is not always possible to identify and deter misconduct by employees and other third parties, and the precautions we take to detect and prevent
this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions
or lawsuits stemming from a failure to comply with such laws or regulations.
Additionally, we are subject to the risk that a person or government could allege fraud or other misconduct, even if none occurred. If any such actions
are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our
business or results of operations, including the imposition of significant civil, criminal, and administrative penalties, damages, monetary fines,
disgorgements, possible exclusion from participation in Medicare, Medicaid, other U.S. federal healthcare programs, or healthcare programs in other
jurisdictions, integrity oversight and reporting obligations to resolve allegations of non-compliance, imprisonment, other sanctions, contractual damages,
reputational harm, diminished profits and future earnings, and curtailment of our operations.
IF HOSPITALS AND OTHER SURGICAL FACILITIES DO NOT CONTINUE TO MEET FEDERAL, STATE, OR OTHER REGULATORY
STANDARDS, THEY MAY BE REQUIRED TO TEMPORARILY CEASE ALL OR PART OF THEIR SYSTEM UTILIZATION.
Our global customers are subject to periodic inspection by regulatory authorities. Our customers are required to comply with applicable regulations,
including with respect to the reprocessing of our instruments and accessories. Hospitals may not follow cleaning and sterilization instructions properly, or
equipment used for cleaning and sterilization may malfunction or be
th
55

-- 56 of 187 --

Table of Contents
used improperly. If our customers deviate from cleaning and sterilization instructions, regulatory authorities may require them to suspend the use of our
systems.
RISKS RELATING TO OUR INTELLECTUAL PROPERTY
IF WE ARE UNABLE TO FULLY PROTECT AND SUCCESSFULLY DEFEND OUR INTELLECTUAL PROPERTY FROM USE BY THIRD
PARTIES, OUR ABILITY TO COMPETE MAY BE HARMED.
Our commercial success depends in part on obtaining patent protection for the proprietary technologies contained in our products and on successfully
defending our patents against infringing products and/or services in litigation or administrative proceedings, including patent oppositions, reviews, or
reexaminations. We incur substantial costs in obtaining patents and, if necessary, defending our patent rights. We do not know whether we will be
successful in obtaining the desired patent protection for our new proprietary technologies or that the protection we do obtain will be found valid and
enforceable when challenged. The success of defending our proprietary rights can be highly uncertain, because it involves complex and often evolving
legal issues and procedures that are dependent on the particular facts of each case.
In addition to patents, we also rely on other intellectual property rights, such as trade secret, copyright, and trademark laws to protect proprietary
technologies. We further utilize nondisclosure agreements and other contractual provisions as well as technical measures to protect our proprietary
technologies. Nevertheless, these measures may be inadequate in protecting our technologies. If these measures prove to be inadequate in protecting our
technologies, our competitive advantages may be reduced. Moreover, we may not have adequate remedies for potential breaches by employees,
consultants, and others who participate in developing our proprietary technologies against their agreements with us regarding intellectual property. As a
result, our trade secrets may be lost.
As foreign markets become more significant in revenue for us, our foreign operations and strategic alliances with foreign entities will likely increase.
Our exposure to risks associated with these operations requires us to increase our reliance on protecting our intellectual property against infringing products
and/or services in markets outside of the U.S. The laws and judicial systems in these countries may introduce yet another level of uncertainty in our effort
to obtain the desired protection as well as defending our rights.
OTHERS MAY BE SUCCESSFUL IN ASSERTING THAT OUR PRODUCTS INFRINGE THEIR INTELLECTUAL PROPERTY RIGHTS,
WHICH MAY CAUSE US TO PAY SUBSTANTIAL DAMAGES AND/OR ENJOIN US FROM COMMERCIALIZING OUR PRODUCTS.
As we continue to introduce and commercialize new products and technologies, there may be U.S. and foreign patents issued to third parties that relate
to our products. Some of these patents may be broad enough to cover one or more aspects of our products. We cannot be certain that patents issued from
our own patent applications covering our products will have a priority date over any patents issued from applications filed by a third party. From time to
time, we receive, and likely will continue to receive, letters from third parties accusing us of infringing and/or inviting us to license their patents. We may
be sued by, or become involved in an administrative proceeding with, one or more of these third parties.
The medical device industry has experienced extensive intellectual property litigation and administrative proceedings. If third parties assert
infringement claims or institute administrative proceedings against us, our technical and management personnel will need to spend significant time and
effort, and we will incur large expenses in defending against these attacks. We cannot be certain that we will prevail in defending against infringement,
validity, or enforceability claims against us. If plaintiffs in patent administrative proceedings are successful, our patent portfolio may be adversely affected.
If plaintiffs in any patent action are successful, we may be enjoined from selling or importing our products, we may have to pay substantial damages,
including treble damages, or we may be required to obtain a license that requires us to pay substantial royalties or relocate our manufacturing facilities. In
addition, any public announcements related to litigation or administrative proceedings initiated or threatened against us could cause our stock price to
decline.
OUR PRODUCTS MAY RELY ON LICENSES FROM THIRD PARTIES, WHICH MAY NOT BE AVAILABLE TO US ON COMMERCIALLY
REASONABLE TERMS OR AT ALL. IF WE LOSE ACCESS TO THESE TECHNOLOGIES, OUR REVENUES COULD DECLINE.
Our products may rely on technology that we license from others, including technology that is integral to our products. There is no assurance that we
can obtain or retain licenses on acceptable terms or at all. The license agreements we have entered into with several industry partners may be terminated for
breach. If any of these agreements are terminated, we may be unable to reacquire the necessary license on satisfactory terms or at all. The failure to obtain,
retain, or maintain licenses could prevent or delay further development or commercialization of our products, which may have a material adverse effect on
our business, financial condition, or results of operations.
56

-- 57 of 187 --

Table of Contents
GENERAL RISK FACTORS
OUR FUTURE OPERATING RESULTS MAY BE BELOW EXPECTATIONS, WHICH COULD CAUSE OUR STOCK PRICE TO DECLINE.
Due to the dynamic nature of our industry, we have limited insight into trends that may emerge and affect our business. The revenue and income
potential of our opportunities are unproven, and we may be unable to maintain or grow our revenue or income. Our products typically have lengthy sales
cycles. In addition, our costs may be higher than we anticipated. If we fail to generate sufficient revenues or our costs are higher than we expect, our results
of operations may be materially adversely affected. Further, future revenue from sales of our products is difficult to forecast, because new surgical
technologies are still evolving. Our results of operations could be impacted by numerous factors, including:
• the extent to which our products achieve and maintain acceptance;
• actions relating to regulatory matters;
• product quality and supply problems;
• inflationary pressures on the cost of producing and distributing our products;
• our timing and ability to develop our manufacturing and sales and marketing capabilities;
• demand for our products;
• the utilization of our systems placed under usage-based operating lease arrangements;
• the size and timing of particular sales and any collection delays related to those sales;
• the progress of surgical training in the use of our products;
• our ability to develop, introduce, and market new or enhanced versions of our products on a timely basis;
• third-party payor reimbursement policies;
• our ability to protect our proprietary rights and defend against third-party challenges;
• our ability to license additional intellectual property rights; and
• the progress and results of any clinical trials.
Our operating results in any particular period may not be a reliable indication of our future performance. It is possible that, in future periods, our
operating results could be below the expectations of securities analysts or investors. If this occurs, the price of our common stock and the value of your
investment will likely decline.
OUR STOCK PRICE HAS BEEN, AND WILL LIKELY CONTINUE TO BE, VOLATILE.
The market price of our common stock has experienced fluctuations and may fluctuate significantly in the future. For example, during 2025, the
adjusted closing price of our common stock reached a high of $610.45 and a low of $429.59. Our stock price has, in the past, and could, in the future,
fluctuate for a number of reasons, including:
• announcements about us or our competitors;
• variations in our operating results and financial guidance;
• our introduction or abandonment of new technologies or products;
• regulatory approvals and enforcement actions;
• changes in our product pricing policies;
• changes in earnings estimates;
• changes in recommendations regarding our stock or more favorable relative recommendations about our competitors by industry or securities
analysts;
• economic changes and overall market volatility;
• announcements relating to product quality and the supply chain for our products;
• litigation;
• media coverage, whether accurate or inaccurate, fair or misleading;
• political uncertainties;
• short sales on shares of our common stock or other activities by short sellers; and
• our stock repurchase program.
Future stock repurchase programs will be contingent on a variety of factors, including our financial condition, results of operations, and business
requirements. There can be no assurance that we will continue repurchasing our common stock in the future, consistent with historical levels or at all, or
that our stock repurchase programs will have a beneficial impact on our stock price.
57

-- 58 of 187 --

Table of Contents
In addition, stock markets generally have experienced, and in the future may experience, significant price and volume volatility. This volatility has a
substantial effect on the market prices of securities of many public companies for reasons frequently unrelated or disproportionate to the operating
performance of the specific companies. Further, the securities of many medical device companies, including us, have historically been subject to extensive
price and volume fluctuations that may affect the market price of their common stock. If these broad market fluctuations continue, it may have a material
adverse impact on the market price of our common stock.
CHANGES TO FINANCIAL ACCOUNTING STANDARDS MAY AFFECT OUR REPORTED RESULTS OF OPERATIONS.
A change in accounting standards can have a significant effect on our reported results and may retroactively affect previously reported results. New
accounting pronouncements and varying interpretations of accounting pronouncements have occurred and may occur in the future. Changes to existing
standards or the reevaluation of current practices may adversely affect our reported financial results or the way we conduct our business.
ITEM 1B. UNRESOLVED STAFF COMMENTS
None.
ITEM 1C. CYBERSECURITY
CYBERSECURITY RISK MANAGEMENT AND STRATEGY
We have developed and implemented a cybersecurity risk management program intended to protect the confidentiality, integrity, and availability of our
critical systems and information. We design and assess our program based on various cybersecurity frameworks, such as the National Institute of Standards
and Technology (“NIST”) and the Center for Internet Security (“CIS”), as well as information security standards issued by the International Organization
for Standardization, including ISO 27001 and ISO 27002. Our cybersecurity systems and processes are ISO 27001 certified. We use these cybersecurity
frameworks and information security standards as a guide to help us identify, assess, and manage cybersecurity risks relevant to our business. We reference
these recognized frameworks (e.g., NIST, CIS, ISO 27001/27002) as guides to inform our processes; however, this does not imply that we meet any
particular technical standards, only that these frameworks inform, but do not by themselves define, the scope of our program.
Our cybersecurity risk management program is integrated into our overall enterprise risk management program and shares common methodologies,
reporting channels, and governance processes that apply across the enterprise risk management program to other legal, compliance, strategic, operational,
and financial risk areas.
Our cybersecurity risk management program includes:
• risk assessments designed to help identify material cybersecurity risks to our critical systems, information, products, services, and our broader
enterprise information technology environment;
• a security team principally responsible for managing (1) our cybersecurity risk assessment processes, (2) our security controls, and (3) our
response to cybersecurity incidents;
• the use of external service providers, where appropriate, to assess, test, or otherwise assist with aspects of our security controls;
• cybersecurity awareness training for our employees, incident response personnel, and senior management;
• a cybersecurity incident response plan that includes procedures for responding to cybersecurity incidents; and
• a third-party risk management process for service providers, suppliers, and vendors.
To date, we are not aware of risks from cybersecurity threats that have materially affected us, including our business strategy, results of operations, or
financial condition. As we face evolving cybersecurity threats, we continue to monitor and reassess these risks to effectively mitigate them as part of our
enterprise risk management program.
CYBERSECURITY GOVERNANCE
Our Board considers cybersecurity risk as part of its risk oversight function and has delegated oversight of cybersecurity and other information
technology risks to the Audit Committee. The Audit Committee oversees management’s implementation of the cybersecurity risk management program.
The Audit Committee receives quarterly reports from management on our cybersecurity risks. In addition, management updates the Audit Committee,
as necessary, regarding any material cybersecurity incidents, as well as any incidents with lesser potential impact. Our incident response procedures are
coordinated with our disclosure controls and procedures to facilitate timely escalation to senior management and the Audit Committee for materiality
assessment and, if required, current reporting.
58

-- 59 of 187 --

Table of Contents
The Audit Committee reports to the full Board regarding its activities, including those related to cybersecurity. The full Board also receives briefings
from management on our cybersecurity risk management program. Board members receive presentations on cybersecurity topics from our IT management
team, internal security staff, or external experts as part of the Board’s continuing education. Six members of our Board have information security expertise,
including Joseph C. Beery, Lewis Chew, Gary S. Guthart, Ph.D., Amal M. Johnson, Sreelakshmi Kolli, and Keith R. Leonard, Jr.
Our management team, including our IT management team, is responsible for assessing and managing our material risks from cybersecurity threats.
The team has primary responsibility for our overall cybersecurity risk management program and supervises both our internal cybersecurity personnel and
our retained external cybersecurity consultants. Our management team is led by our Senior Director, IT Cybersecurity, who is within the organization of
our Chief Information Officer (“CIO”). Our Senior Director, IT Cybersecurity has over 20 years of extensive information technology experience, including
cybersecurity policies and standards, vulnerability management, data loss prevention, threat intelligence, incident response, risk management, and system,
network, and web security. He holds a Certified Information Systems Security Professional (“CISSP”) certification. Our CIO holds a bachelor’s degree in
Electronics Engineering from the University of Mumbai and has over 20 years of experience in CIO and other IT leadership positions at various public
companies. Our management team has certifications from various organizations, such as ISC2 and Global Information Assurance.
Our management team oversees efforts to prevent, detect, mitigate, and remediate cybersecurity risks and incidents through various means, which may
include briefings from internal security personnel, threat intelligence and other information obtained from governmental, public, or private sources,
including external consultants engaged by us, and alerts and reports produced by security tools deployed in the information technology environment.
ITEM 2. PROPERTIES
As of December 31, 2025, we own approximately 4.1 million square feet of space on 128 acres of land in Sunnyvale, California, where we house our
principal headquarters, research and development, service, and support functions, as well as certain of our manufacturing operations.
Outside of Sunnyvale, California, we own facilities in other U.S. locations that are used for sales, training, manufacturing, engineering, and
administrative functions, including approximately 1.7 million square feet of space on 69 acres of land in Peachtree Corners, Georgia. We also lease
approximately 1.1 million square feet of space for certain manufacturing, engineering, warehousing, and support functions at various locations in the U.S.
Outside of the U.S., we own and/or lease properties in Mexicali, Mexico, Germany, and Bulgaria, primarily for manufacturing operations, and
Aubonne, Switzerland, primarily for our international headquarters. In China, our Joint Venture leases facilities for research and development,
manufacturing, and sales operations. In Israel, we lease facilities for research and development. In addition, we lease various international facilities for
sales and other operations.
ITEM 3. LEGAL PROCEEDINGS
The information included in Note 8 to the Consolidated Financial Statements included in Part II, Item 8 of this report is incorporated herein by
reference.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
59

-- 60 of 187 --

Table of Contents
PART II
ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF
EQUITY SECURITIES
COMMON STOCK
Our common stock is traded on The Nasdaq Global Select Market under the symbol “ISRG.”
As of January 28, 2026, there were 122 stockholders of record of our common stock, although there are a significantly larger number of beneficial
owners of our common stock.
DIVIDENDS
We have never declared or paid any cash dividends on our common stock. We currently intend to retain earnings for use in the operation and expansion
of our business. In addition, we may use a portion of our retained earnings to repurchase shares of our common stock, if appropriate.
SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS
Please see Item 12. “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” under Part III of this
Annual Report on Form 10-K for information on where to find information required by Item 201(d) of Regulation S-K.
RECENT SALES OF UNREGISTERED SECURITIES
In November 2025, as partial consideration for the acquisition of a business, we issued 29,572 shares of common stock to the sellers of such business.
The shares were issued pursuant to an exemption from registration in Section 4(a)(2) of the Securities Act of 1933. We relied on this exemption from
registration based, in part, on the nature of the transaction and the representations made by the sellers of the business.
ISSUER PURCHASES OF EQUITY SECURITIES
The table below summarizes our common stock repurchase activity for the quarter ended December 31, 2025.
Fiscal Period
Total Number of
Shares
Repurchased
Average
Price Paid
Per Share
Total Number of
Shares Purchased As
Part of a Publicly
Announced Program
Approximate Dollar
Amount of Shares That
May Yet be Purchased
Under the Program (1)
October 1 to October 31, 2025 	463,190 $ 	432.55 	463,190 $ 	1.7 billion
November 1 to November 30, 2025 	— $ 	— 	— $ 	1.7 billion
December 1 to December 31, 2025 	— $ 	— 	— $ 	1.7 billion
Total during quarter ended December 31, 2025 	463,190 $ 	432.55 	463,190
(1) Since March 2009, we have had an active stock repurchase program (the “Repurchase Program”). As of December 31, 2025, our Board of Directors (our “Board”) had authorized an
aggregate amount of up to $13.0 billion for stock repurchases, of which the most recent authorization occurred in May 2025, when our Board increased the authorized amount available
under our Repurchase Program to $4.0 billion, including amounts remaining under previous authorization. As of December 31, 2025, the remaining amount available to repurchase shares
under the authorized Repurchase Program was $1.7 billion. The authorized Repurchase Program does not have an expiration date.
60

-- 61 of 187 --

Table of Contents
STOCK PERFORMANCE GRAPH
This graph is not “soliciting material” or deemed “filed” with the SEC or subject to Regulation 14A or 14C (17 CFR 240.14a-1–240.14a-104 or
240.14c-1–240.14c-101) for purposes of Section 18 of the Exchange Act, or otherwise subject to liabilities under that Section, and shall not be deemed
incorporated by reference into any filings of Intuitive Surgical, Inc. under the Securities Act of 1933, as amended, whether made before or after the date
hereof and irrespective of any general incorporation language in any such filing.
The graph set forth below compares the cumulative total stockholder return on our common stock between December 31, 2020, and December 31,
2025, with the cumulative total return of (i) the Nasdaq Composite Index, (ii) the S&P 500 Healthcare Index, and (iii) the S&P 500 Index over the same
period. This graph assumes an investment of $100.00 on December 31, 2020, in our common stock, the Nasdaq Composite Index, the S&P Healthcare
Index, and the S&P 500 Index and assumes the re-investment of dividends, if any.
The comparisons shown in the graph below are based on historical data. We caution that the stock price performance shown in the graph below is not
necessarily indicative of, nor is it intended to forecast, the potential future performance of our common stock.
COMPARISON OF CUMULATIVE TOTAL RETURN AMONG INTUITIVE, NASDAQ COMPOSITE, S&P HEALTHCARE
INDEX, AND S&P 500 INDEX
December 31,
2020 	2021 	2022 	2023 	2024 	2025
Intuitive Surgical, Inc. 	$ 	100.00 $ 	131.76 $ 	97.30 $ 	123.71 $ 	191.40 $ 	207.69
Nasdaq Composite 	$ 	100.00 $ 	122.18 $ 	82.43 $ 	119.22 $ 	154.48 $ 	187.14
S&P 500 Healthcare Index 	$ 	100.00 $ 	124.16 $ 	119.75 $ 	120.12 $ 	121.20 $ 	136.40
S&P 500 Index 	$ 	100.00 $ 	128.71 $ 	105.40 $ 	133.10 $ 	166.40 $ 	196.16
ITEM 6.
[RESERVED]
61

-- 62 of 187 --

Table of Contents
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following management's discussion and analysis should be read in conjunction with our Consolidated Financial Statements and Notes thereto.
We refer to our fiscal years ended December 31, 2025, 2024, and 2023 as “2025,” “2024,” and “2023,” respectively. Unless the context requires
otherwise, we are referring to Intuitive Surgical, Inc. and its consolidated subsidiaries when we use the terms “Intuitive,” the “Company,” “we,” “our,” or
“us.”
This section of the Annual Report on Form 10-K generally discusses 2025 and 2024 items and year-to-year comparisons between 2025 and 2024.
Discussions of 2023 items and year-to-year comparisons between 2024 and 2023 that are not included in this report on Form 10-K can be found in
“Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 of the Company’s Annual Report on Form
10-K for the fiscal year ended December 31, 2024.
Overview
Open surgery remains a prevalent form of surgery and is used in almost every area of the body. However, the large incisions required for open surgery
create trauma to patients, typically resulting in longer hospitalization and recovery times, increased hospitalization costs, and additional pain and suffering
relative to minimally invasive surgery, where MIS is available. For over four decades, MIS has reduced trauma to patients by allowing selected surgeries to
be performed through small ports rather than large incisions. MIS has been widely adopted for certain surgical procedures.
Da Vinci surgical systems enable surgeons to extend the benefits of MIS to many patients who would otherwise undergo a more invasive surgery by
using computational, robotic, and imaging technologies to overcome many of the limitations of traditional open surgery or conventional MIS. Surgeons
using a da Vinci surgical system operate while seated at a console viewing a 3D, high-definition image of the surgical field. This immersive console
connects surgeons to the surgical field and their instruments. While seated at the console, the surgeon manipulates instrument controls in a natural manner,
similar to open surgical technique. Our technology is designed to provide surgeons with a range of articulation of the surgical instruments used in the
surgical field analogous to the motions of a human wrist, while filtering out the tremor inherent in a surgeon’s hand. In designing our products, we focus on
making our technology easy and safe to use.
Our da Vinci products fall into five broad categories: da Vinci surgical systems, da Vinci instruments and accessories, da Vinci stapling, da Vinci
energy, and da Vinci vision. We provide a comprehensive suite of systems, learning, and services offerings. Digitally enabled for nearly three decades,
these three offerings aim to decrease variability by providing dependable, consistent functionality and an integrated user experience. Our systems category
includes robotic platforms, software, vision, energy, and instruments and accessories. Our learning category includes learning and enabling technology,
such as simulation and telepresence, as well as technical training programs and personalized peer-to-peer learning opportunities. We have a global network
of field service engineers and distributors through which we deliver a suite of services, including installation, repair, maintenance, around-the-clock
technical support, and system monitoring. We also offer customized analytics and consultation to hospitals for program optimization.
We have commercialized the following da Vinci surgical systems: the da Vinci standard surgical system in 1999, the da Vinci S surgical system in
2006, the da Vinci Si surgical system in 2009, the fourth-generation da Vinci Xi surgical system in 2014, and the fifth-generation da Vinci 5 surgical system
in 2024. We extended our fourth-generation platform by adding the da Vinci X surgical system, commercialized in 2017 and targeted at more cost-sensitive
markets.
In March 2024, we obtained FDA clearance for our da Vinci 5 surgical system, our next-generation multi-port robotic system, for use in all surgical
specialties and procedures indicated for da Vinci Xi, except for cardiac and pediatric indications. In October 2024, we obtained regulatory clearance in
South Korea for the da Vinci 5 surgical system for use in urologic, general, gynecologic, thoracoscopic, thoracoscopically-assisted cardiotomy, and
transoral otolaryngology surgical procedures. In June 2025, we obtained regulatory clearance in Japan for the da Vinci 5 surgical system for use in all
surgical specialties and procedures indicated for da Vinci Xi, except for cardiac indications. In July 2025, we obtained European certification in accordance
with the EU MDR for the da Vinci 5 surgical system for adult and pediatric use in minimally invasive endoscopic procedures across abdominopelvic and
thoracoscopic surgical procedures, including urologic, gynecologic, and general laparoscopic procedures, excluding the use of force feedback. We intend to
seek European certification for the use of force feedback in the future. In our OUS markets, we are in the midst of a phased launch of our da Vinci 5
surgical system over several quarters. As of December 31, 2025, we have an installed base of 1,231 da Vinci 5 surgical systems.
Additionally, we extended our fourth-generation platform by adding the da Vinci SP surgical system, commercialized in 2018. The da Vinci SP
surgical system accesses the body through a single incision, while the other da Vinci surgical systems access the body through multiple incisions. All da
Vinci surgical systems include a surgeon’s console (or consoles), imaging electronics, a patient-side cart, and computational hardware and software.
62

-- 63 of 187 --

Table of Contents
We are in the early stages of launching our da Vinci SP surgical system, and we have an installed base of 377 da Vinci SP surgical systems as of
December 31, 2025. We have received FDA clearance for the da Vinci SP surgical system for urologic, colorectal, general thoracoscopic, and certain
transoral procedures. Additionally, the da Vinci SP surgical system has received regulatory clearance in South Korea for a broad set of procedures. The da
Vinci SP surgical system has also received regulatory clearance in Japan for the same set of procedures that are currently allowed with the da Vinci Xi
surgical system in Japan. In January 2024, the da Vinci SP surgical system received European certification in accordance with Regulation (EU) 2017/745 of
the European Parliament and of the Council of 5 April 2017 on medical devices (the “EU MDR”) for use in endoscopic abdominopelvic, thoracoscopic,
transoral otolaryngology, transanal colorectal, and breast surgical procedures, and we are commercializing the da Vinci SP surgical system in select major
European countries as part of a measured rollout strategy. In August 2024, we obtained regulatory clearance in Taiwan for our da Vinci SP surgical system
for use in endoscopic abdominopelvic, thoracoscopic, transoral otolaryngology, transanal colorectal, transanal total mesorectal excision, and breast surgical
procedures. We plan to seek FDA clearances for additional indications for the da Vinci SP surgical system and expand the system’s regulatory approvals
(including for additional indications) in other OUS markets over time. The success of the da Vinci SP surgical system is dependent on positive experiences
and improved clinical outcomes for the procedures for which it has been cleared as well as securing additional clinical clearances.
We offer approximately 70 different multi-port da Vinci instruments to provide surgeons with flexibility in choosing the types of tools needed to
perform a particular surgery. These multi-port instruments are generally robotically controlled and provide end effectors (tips) that are similar to those used
in either open or laparoscopic surgery. We offer advanced instrumentation for the da Vinci 5, da Vinci X, and da Vinci Xi surgical systems, including da
Vinci energy and da Vinci stapler products, to provide surgeons with sophisticated, computer-aided tools to precisely and efficiently interact with tissue.
The da Vinci 5, da Vinci X, and da Vinci Xi surgical systems generally share the same instruments, whereas the da Vinci Si surgical system uses
instruments that are not compatible with the da Vinci 5, da Vinci X, and da Vinci Xi systems. Additionally, we have introduced a unique set of force
feedback instruments that are only compatible with our da Vinci 5 surgical system. We also currently offer 14 core instruments on our da Vinci SP surgical
system. We plan to expand our da Vinci SP instrument offering over time.
Our learning and enabling technology offerings facilitate access to education and training on our products. Our enabling technologies include
telepresence and Advanced Insights Suite (which includes Case Insights and Insights Engine), and our learning technology solutions include Intuitive
Learning, SimNow, customized training models, remote case observations, and remote proctoring.
In 2019, we commercialized our Ion endoluminal system, which is a flexible, robotic-assisted, catheter-based platform that utilizes instruments and
accessories for which the first cleared indication is minimally invasive biopsies in the lung. Our Ion system extends our commercial offering beyond
surgery into diagnostic, endoluminal procedures. The system features an ultra-thin, ultra-maneuverable catheter that can articulate 180 degrees in all
directions and allows navigation far into the peripheral lung and provides the stability necessary for precision in a biopsy. Many suspicious lesions found in
the lung may be small and difficult to access, which can make diagnosis challenging, and Ion helps physicians obtain tissue samples from deep within the
lung, which could help enable earlier diagnosis. Our Ion endoluminal system has received FDA clearance, and OUS regulatory clearances include
European certification in accordance with the EU MDR, regulatory clearance in South Korea, and NMPA regulatory clearance in China. We plan to seek
additional clearances, approvals, and certifications for our Ion endoluminal system in OUS markets over time.
The success of new product introductions depends on a number of factors including, but not limited to, pricing, competition, geographic market and
consumer acceptance, the effective forecasting and management of product demand, inventory levels, the management of manufacturing and supply costs,
and the risk that new products may have quality or other defects in the early stages of introduction.
Trade and Tariffs Update
Beginning in 2025, the U.S. implemented a baseline tariff framework on most imports with higher country- and product-specific rates for certain
trading partners, including Mexico, Germany, and China, among others, alongside reciprocal measures announced by other jurisdictions. Our disclosure
reflects tariffs currently in effect or announced as of the date of this report and assumes such tariffs remain in place, consistent with how we reflect tariff
impacts in our financial outlook. We currently manufacture a significant majority of our instruments and accessories in Mexicali, Mexico. Most of these
products qualify as originating under the USMCA and, therefore, have not been subject to U.S. import tariffs to date. We also import certain raw materials
and finished goods from outside of the U.S. that are subject to tariffs, including our endoscopes, a majority of which are manufactured in Germany. In
addition, our operations involve importing certain raw materials from China, importing sub-assemblies to support our local da Vinci Xi surgical system
manufacturing in China, and selling U.S.-manufactured da Vinci Xi
63

-- 64 of 187 --

Table of Contents
surgical systems into China. These imports into the U.S. and China are subject to tariffs, which we expect to continue to have an adverse impact on the
product cost of our da Vinci Xi surgical system in China.
Some of our suppliers have also incurred incremental tariffs and have passed or may pass on those additional costs to us. These pass-through tariffs
and other specific tariff actions against steel and aluminum, critical minerals, semiconductors, and other products have not had a material direct impact on
our operations to date, but the long-term effect of these and other existing and future tariff actions is difficult to predict.
U.S. tariffs have also given rise to trade measures by other countries, including additional restrictions on certain exports. These trade measures could
impact the reliability and efficiency of our supply chain if they are imposed on materials important to our production operations. In particular, restrictions
on the export of rare earth elements, including magnets, and critical minerals from China could potentially restrict access to components used in many of
our products and could have a material adverse effect on our business, financial condition, or results of operations.
In 2025, tariffs and other trade measures have increased our cost of revenues by approximately $63.0 million. Based on the announced and
implemented global tariffs as of the date of this report, and assuming such tariffs remain in place, we expect our cost of revenues driven by tariffs and other
trade measures to continue to increase in 2026. Future changes to tariff rates and the imposition of new tariffs by the U.S. and/or other countries could
result in a material impact to our results of operations. The ultimate impact of changes to tariffs and trade barriers will depend on various factors, including
the timing, amount, scope, and nature of any tariffs or trade barriers that are implemented, all of which could have a material adverse effect on our business,
financial condition, or results of operations.
Remanufactured Instruments
Third parties have offered, and may continue to offer, instruments that have been modified to support the use of some of our limited-use instruments
beyond their labeled life. We are aware that the FDA has granted 510(k) clearance for the remanufacturing of certain of these instruments for use with our
da Vinci Si, da Vinci X, and da Vinci Xi surgical systems. To date, such offerings have not had a material impact on our revenues, but such activities could
result in reduced revenue if these products have broader uptake as well as generate negative publicity for us if these products cause injuries and/or do not
function as intended when used. Both of these possibilities could have a material adverse effect on our business, financial condition, or results of
operations.
For further details on remanufactured instruments, refer to the “Products & Services – Da Vinci – Instruments” section of our corporate website. The
inclusion of a reference to our corporate website in this filing does not include or incorporate by reference the information on our website into this Form
10-K.
Other Macroeconomic Environment Factors
Our future results of operations and liquidity could be materially adversely affected by uncertainties surrounding macroeconomic and geopolitical
factors both in the U.S. and globally. These uncertainties include any introduction or modification of tariffs or trade barriers, supply chain challenges,
inflationary pressures, elevated interest rates, and disruptions in the commodity markets stemming from conflicts, such as those between Russia and
Ukraine and conflicts in the Middle East.
During the fourth quarter of 2025, we continued to experience isolated stresses to supply, particularly for specific component materials impacted by
evolving trade requirements and at certain subcontract suppliers that were operationally challenged to meet our production requirements. These isolated
instances did not have a material impact on our business during the fourth quarter of 2025. As a result of the escalation in tariffs and country-specific trade
requirements, including export license controls between major economies, we may experience tariff-related inflation in raw materials costs as well as
supply shortages based on shipment delays and the availability of alternative sources of supply for critical materials used in the manufacture of finished
products.
Elevated interest rates may also impact the ability of certain suppliers to fund necessary investments in capacity and infrastructure. Any insolvency of
certain suppliers, including sole- and single-sourced suppliers, may present heightened continuity risks. Additionally, although incidents of cybersecurity
breaches have not significantly impacted our supply chain to date, they continue to be actively monitored to protect supply continuity. We are actively
engaged in activities that seek to mitigate the impact of any supply chain risks and disruptions on our operations.
Some hospitals continue to experience challenges with staffing and cost pressures that could affect their ability to provide patient care. Additionally,
certain hospitals are facing significant financial pressure as supply chain constraints and inflation have driven up operating costs and elevated interest rates
have made access to credit more expensive. Hospitals may also be adversely affected by the liquidity concerns as a result of the broader macroeconomic
environment. Any or all of these factors could negatively impact the number of da Vinci procedures performed or surgical systems placed and have a
material adverse effect on our business, financial condition, or results of operations.
64

-- 65 of 187 --

Table of Contents
Regulatory Activities
Overview
Our products must meet the requirements of a large and growing body of international regulations and standards that govern the product safety,
efficacy, advertising, labeling, safety reporting design, manufacture, materials content and sourcing, testing, certification, packaging, installation, use, and
disposal of our products. Examples of such standards include electrical safety standards, such as those of the International Electrotechnical Commission,
and composition standards, such as the Reduction of Hazardous Substances and the Waste Electrical and Electronic Equipment Directives in the EU.
Failure to meet these standards could limit our ability to market our products in those regions that require compliance with such standards.
Our products and operations are also subject to increasingly stringent medical device, privacy, and other regulations by national, regional, federal,
state, and local authorities. After a device is placed on the market, numerous FDA and comparable foreign regulatory requirements continue to apply. These
requirements include establishment registration, potential quality system and manufacturing audits and inspections, and device listing with the FDA or
other foreign regulatory authorities and compliance with medical device reporting regulations, which require that manufacturers report to the FDA or other
foreign regulatory authorities if their device caused or contributed, or may have caused or contributed, to a death or serious injury or malfunctioned in a
way that would likely cause or contribute to a death or serious injury if it were to recur.
We anticipate that timelines for the introduction of new products and/or indications may be extended relative to past experience as a result of these
regulations. For example, we have seen elongated regulatory approval timelines in the U.S. and Europe.
Clearances, Approvals, and Certifications
We have generally obtained the regulatory clearances, approvals, and certifications required to market our products for our targeted surgical specialties
within the U.S., South Korea, Japan, and the European markets in which we operate. We have additionally obtained regulatory clearances, approvals, and
certifications for the following products over the past several years:
Da Vinci Surgical Systems
Multi-port
• In January 2026, we obtained FDA clearance for the use of our da Vinci 5 surgical system in selected thoracoscopically-assisted cardiac surgical
procedures using non-force feedback instruments, including mitral valve repair and replacement, tricuspid valve repair, IMA mobilization for
cardiac revascularization, patent foramen ovale closure, atrial septal defect repair, left atrial appendage closure/occlusion, atrial myxoma excision,
and epicardial pacing lead placement procedures.
• In September 2025, we obtained regulatory clearance in Japan for our Vessel Sealer Curved for use with our da Vinci 5, da Vinci X, and da Vinci
Xi surgical systems for grasping and blunt dissection of tissue, as well as bipolar coagulation and mechanical transection of blood vessels (veins
and arteries) up to 7mm in diameter, lymphatic vessels, and tissue bundles that fit within the instrument’s jaws. In June 2025, we obtained FDA
clearance for the same instrument.
• In July 2025, we obtained European certification in accordance with the EU MDR for our da Vinci 5 surgical system for adult and pediatric use in
minimally invasive endoscopic procedures across abdominopelvic and thoracoscopic surgical procedures, including urologic, gynecologic, and
general laparoscopic procedures, excluding the use of force feedback. We intend to seek European certification for the use of force feedback in the
future. In June 2025, we obtained regulatory clearance in Japan for the da Vinci 5 surgical system for use in all surgical specialties and procedures
indicated for da Vinci Xi, except for cardiac indications. In October 2024, we obtained regulatory clearance in South Korea for the da Vinci 5
surgical system for use in urologic, general, gynecologic, thoracoscopic, thoracoscopically-assisted cardiotomy, and transoral otolaryngology
surgical procedures. In March 2024, we obtained FDA clearance for our da Vinci 5 surgical system for use in all surgical specialties and
procedures indicated for da Vinci Xi, except for cardiac and pediatric indications as well as one contraindication related to the use of force
feedback in hysterectomy and myomectomy surgical procedures. In our OUS markets, we are early in the launch of our da Vinci 5 surgical
system.
◦ In December 2024, we obtained European certification in accordance with the EU MDR for our E-200 generator. In July 2023, we received
regulatory clearance for our E-200 generator in Japan and South Korea. In November 2022, we obtained FDA clearance for our E-200 generator.
The E-200 generator can be used in da Vinci robotic procedures, as well as non-robotic open and laparoscopic procedures, to deliver high-
frequency energy for cutting, coagulation, and vessel sealing of tissues. The E-200 generator includes the same advanced energy capability as the
E-100 generator and supports the same vessel sealing instruments.
65

-- 66 of 187 --

Table of Contents
◦ In September 2024, we obtained FDA clearance for our redesigned 8 mm SureForm 30 stapler and 8 mm SureForm 30 Curved-Tip stapler
instruments and reloads for use with our da Vinci 5, da Vinci X, and da Vinci Xi surgical systems in general, thoracic, gynecologic, urologic, and
pediatric surgical procedures. In April 2024, we obtained European certification in accordance with the EU MDR for our redesigned 8 mm
SureForm 30 stapler and 8 mm SureForm 30 Curved-Tip stapler instruments and reloads for use in general, thoracic, gynecologic, urologic, and
pediatric surgical procedures.
◦ In August 2023, following approval by China’s NMPA for a local version of our da Vinci Xi surgical system in June 2023, our Joint Venture
received a manufacturing license that permits the Joint Venture to manufacture our da Vinci Xi surgical system for sale to customers in China.
Single-port
◦ In December 2025, we obtained FDA clearance for the use of our da Vinci SP surgical system in cholecystectomy, inguinal hernia repair,
appendectomy, and nipple sparing mastectomy (NSM) procedures. In May 2025, we obtained FDA clearance for the use of our da Vinci SP
surgical system in transanal local excision/resection, a form of minimally invasive surgery performed through a natural orifice to avoid abdominal
surgical incisions, for select procedures. In December 2024, we obtained FDA clearance for the use of our da Vinci SP surgical system in
colorectal surgical procedures. In July 2024, we obtained FDA clearance for the use of our da Vinci SP surgical system in general thoracoscopic
surgical procedures. In April 2023, we obtained FDA clearance for the use of our da Vinci SP surgical system in simple prostatectomy procedures
and in transvesical approaches to simple and radical prostatectomy.
◦ In June 2025, we obtained regulatory clearances in South Korea and Japan for our SP SureForm 45 stapler and our SP SureForm 45 curved-tip
stapler for use with our da Vinci SP surgical system. In March 2025, we obtained FDA clearance for our SP SureForm 45 stapler and our SP
SureForm 45 curved-tip stapler for use with our da Vinci SP surgical system, which may be particularly useful in thoracic and colorectal surgical
procedures.
◦ In August 2024, we obtained regulatory clearance in Taiwan for our da Vinci SP surgical system for use in endoscopic abdominopelvic,
thoracoscopic, transoral otolaryngology, transanal colorectal, transanal total mesorectal excision, and breast surgical procedures. In January 2024,
we obtained European certification in accordance with the EU MDR for our da Vinci SP surgical system for use in endoscopic abdominopelvic,
thoracoscopic, transoral otolaryngology, transanal colorectal, and breast surgical procedures.
Ion Endoluminal System
◦ In October 2025, we obtained FDA clearance for software advancements for the Ion endoluminal system. This software release introduces
artificial intelligence across Ion’s entire navigational workflow, while also integrating new advanced imaging capabilities to support accurate and
efficient lung biopsies.
◦ In February 2025, we obtained European certification in accordance with the EU MDR to extend the number of uses of our catheter instrument
used with our Ion endoluminal system from five to eight uses. In April 2024, we obtained FDA clearance to extend the number of uses of our
catheter instrument from five to eight uses.
◦ In March 2024, we received NMPA regulatory clearance for our Ion endoluminal system in China. We placed our first Ion systems in China
during the third quarter of 2024 and will continue our rollout of the Ion system in China in a measured fashion. In September 2023, we received
regulatory clearance in South Korea for our Ion endoluminal system. In March 2023, we obtained European certification in accordance with the
EU MDR for our Ion endoluminal system.
In June 2023, the China National Health Commission published the 14 five-year plan quota for major medical equipment to be sold in China on its
official website (the “2023 Quota”). Under the original 2023 Quota, the government will allow for the sale of 559 new surgical robots into China, which
could include da Vinci surgical systems as well as surgical systems introduced by others. As of December 31, 2025, including systems that were sold in
prior quarters, we have placed 162 da Vinci surgical systems under the original 2023 Quota and 5 da Vinci surgical systems under special approval. Future
sales of da Vinci surgical systems under this and any previously published open quotas are uncertain, as they are open to other medical device companies
that have introduced robotic-assisted surgical systems and are dependent on hospitals completing a tender process and receiving associated approvals. Our
ability to track the number of systems that could be sold under these quotas in the future is limited by provincial and national agencies making such
information publicly available.
Since 2022, several provinces in China have implemented significant limits on what hospitals can charge patients for surgeries using robotic surgical
technology, including soft tissue surgery. These limits have impacted the number of procedures performed in those provinces as well as pricing of our
instruments and accessories, which have impacted our instruments and accessories revenue. However, as of the date of this report, these limits have not had
a material impact on our business,
th
66

-- 67 of 187 --

Table of Contents
financial condition, or results of operations, as only a small portion of our installed base in China is currently located in the impacted provinces. Companies
providing robotic surgical technology, including our Joint Venture, have been meeting with Chinese government healthcare agencies to discuss these
developments and to provide feedback. We cannot assure you that additional provincial or national healthcare agencies and administrations will not impose
similar limits, and we expect to continue to face increased pricing pressure, both of which could further impact the number of procedures performed and
our instruments and accessories revenue in China.
The Japanese MHLW considers reimbursement for procedures in April of even-numbered years. The process for obtaining reimbursement requires
Japanese university hospitals and surgical societies, with our support, to seek reimbursement. There are multiple pathways to obtain reimbursement for
procedures, including those that require in-country clinical and economic data. An additional five da Vinci procedures were granted reimbursement in April
2024, including lobectomy for benign conditions. In addition, we received higher reimbursement for certain da Vinci rectal resection procedures, as
compared to open procedure reimbursements. The additional reimbursed procedures have varying levels of conventional laparoscopic penetration and will
generally be reimbursed at rates equal to the conventional laparoscopic procedures. Given the reimbursement level and laparoscopic penetration for these
additional procedures, there can be no assurance that the adoption pace for these procedures will be similar to prostatectomy or partial nephrectomy, given
their higher reimbursement, or any other da Vinci procedure.
Field Actions, Recalls, and Corrections
Medical device companies have regulatory obligations to correct or remove medical devices in the field that could pose a risk to health. The definition
of “recalls and corrections” is expansive and includes repair, replacement, inspections, relabeling, and issuance of new or additional instructions for use or
reinforcement of existing instructions for use and training when such actions are taken for specific reasons of safety or compliance. These field actions
require stringent documentation, reporting, and monitoring worldwide. There are other actions that a medical device manufacturer may take in the field
without reporting including, but not limited to, routine servicing and stock rotations.
As we determine whether a field action is reportable in any regulatory jurisdiction, we prepare and submit notifications to the appropriate regulatory
agency for the particular jurisdiction. Regulators can require the expansion, reclassification, or change in scope and language of the field action. In general,
upon submitting required notifications to regulators regarding a field action that is a recall or correction, we will notify customers regarding the field action,
provide any additional documentation required in their national language, and arrange, as required, the return or replacement of the affected product or a
field service visit to perform the correction.
Field actions, as well as certain outcomes from regulatory activities, can result in adverse effects on our business, including damage to our reputation,
delays by customers of purchase decisions, reduction or stoppage of the use of installed systems, and reduced revenue as well as increased expenses.
67

-- 68 of 187 --

Table of Contents
2025 Operational and Financial Highlights
• Total revenue increased by 21% to $10.1 billion for the year ended December 31, 2025, compared to $8.4 billion for the year ended December 31,
2024.
• Approximately 3,153,000 da Vinci procedures were performed during the year ended December 31, 2025, an increase of 18% compared to
approximately 2,683,000 da Vinci procedures for the year ended December 31, 2024.
• Approximately 144,100 Ion procedures were performed during the year ended December 31, 2025, an increase of 51% compared to approximately
95,500 Ion procedures for the year ended December 31, 2024.
• Instruments and accessories revenue increased by 19% to $6.02 billion for the year ended December 31, 2025, compared to $5.08 billion for the
year ended December 31, 2024.
• Systems revenue increased by 26% to $2.47 billion for the year ended December 31, 2025, compared to $1.97 billion for the year ended
December 31, 2024.
• 1,721 da Vinci surgical systems were placed during the year ended December 31, 2025, an increase of 13% compared to 1,526 systems during the
year ended December 31, 2024. The 2025 da Vinci surgical system placements included 870 da Vinci 5 surgical systems, compared with 362 in
2024.
• As of December 31, 2025, we had a da Vinci surgical system installed base of approximately 11,106 systems, an increase of 12% compared to the
installed base of approximately 9,902 systems as of December 31, 2024.
• Utilization of da Vinci surgical systems, measured in terms of procedures per system per year, increased 3% relative to 2024.
• 195 Ion systems were placed during the year ended December 31, 2025, a decrease of 28% compared to 271 systems during the year ended
December 31, 2024.
• As of December 31, 2025, we had an Ion system installed base of approximately 995 systems, an increase of 24% compared to the installed base
of approximately 805 systems as of December 31, 2024.
• Gross profit as a percentage of revenue was 66.0% for the year ended December 31, 2025, compared to 67.5% for the year ended December 31,
2024.
• Operating income increased by 25% to $2.95 billion for the year ended December 31, 2025, compared to $2.35 billion for the year ended
December 31, 2024. Operating income included $803 million and $688 million of share-based compensation expense related to employee stock
plans and $20.2 million and $22.6 million of intangible asset-related charges for the years ended December 31, 2025, and 2024, respectively.
• During the year ended December 31, 2025, we repurchased 4.8 million shares of our common stock for $2.30 billion.
• As of December 31, 2025, we had $9.03 billion in cash, cash equivalents, and investments. Cash, cash equivalents, and investments increased by
$0.20 billion, compared to $8.83 billion as of December 31, 2024, primarily as a result of cash provided by operating activities and proceeds from
stock option exercises and employee stock purchases, partially offset by cash used for repurchases of common stock, capital expenditures, and
taxes paid related to net share settlements of equity awards.
68

-- 69 of 187 --

Table of Contents
Results of Operations
Procedures
We model patient value as equal to procedure efficacy / invasiveness. In this equation, procedure efficacy is defined as a measure of the success of the
procedure in resolving the underlying disease, and invasiveness is defined as a measure of patient pain and disruption of regular activities. When the patient
value of a robotic-assisted procedure is greater than that of alternative treatment options, patients may benefit from seeking out surgeons or physicians and
hospitals that offer robotic-assisted medical procedures, which could potentially result in a local market share shift. Adoption of robotic-assisted procedures
occurs by procedure and by market and is driven by the relative patient value and total treatment costs of robotic-assisted procedures as compared to
alternative treatment options for the same disease state or condition.
We use the number and type of procedures as metrics for financial and operational decision-making and as a means to evaluate period-to-period
comparisons. Management believes that the number and type of procedures provide meaningful supplemental information regarding our performance, as
management believes procedure volume is an indicator of the rate of adoption of our robotic-assisted medical procedures as well as an indicator of future
revenue (including revenue from usage-based operating lease arrangements). Management believes that both it and investors benefit from referring to the
number and type of procedures in assessing our performance and when planning, forecasting, and analyzing future periods. The number and type of
procedures also facilitate management’s internal comparisons of our historical performance. We believe that the number and type of procedures are useful
to investors as metrics, because (1) they allow for greater transparency with respect to key metrics used by management in its financial and operational
decision-making, and (2) they are used by institutional investors and the analyst community to help them analyze the performance of our business.
The vast majority of our installed systems are connected via the internet. System logs can also be accessed by field engineers for systems that are not
connected to the internet. We utilize certain methods that rely on information collected from the installed systems for determining the number and type of
procedures performed that involve estimates and judgments, which are, by their nature, subject to substantial uncertainties and assumptions. Estimates and
judgments for determining the number and type of procedures may be impacted over time by various factors, including changes in treatment modalities,
hospital and distributor reporting behavior, and system internet connectivity. Such estimates and judgments are also susceptible to algorithmic or other
technical errors. In addition, the relationship between the number and type of procedures and our revenues may fluctuate from period to period, and
procedure volume growth may not correspond to an increase in revenue. The number and type of procedures are not intended to be considered in isolation
or as a substitute for, or superior to, revenue or other financial information prepared and presented in accordance with GAAP.
Da Vinci Procedures
The adoption of robotic-assisted surgery using the da Vinci surgical system has the potential to grow for those procedures that offer greater patient
value than to non-da Vinci alternatives and competitive total economics for healthcare providers. Our da Vinci surgical systems are used primarily in
general, gynecologic, urologic, cardiothoracic, and head and neck surgical procedures. We focus our organization and investments on developing,
marketing, and training products and services for procedures in which da Vinci can bring patient value relative to alternative treatment options and/or
economic benefit to healthcare providers. Target procedures in general surgery include hernia repair (both ventral and inguinal), colorectal,
cholecystectomy, and bariatric procedures. Target procedures in urology include prostatectomy and partial nephrectomy. Target procedures in gynecology
include hysterectomy for both cancer and benign conditions and sacrocolpopexy. In cardiothoracic surgery, target procedures include lung resection. In
head and neck surgery, target procedures include transoral surgery. Not all indications, procedures, or products described may be available in a given
country or region or on all generations of da Vinci surgical systems. Surgeons and their patients need to consult the product labeling in their specific
country and for each product in order to determine the cleared uses, as well as important limitations, restrictions, or contraindications.
69

-- 70 of 187 --

Table of Contents
The following table summarizes the approximate number of procedures performed on da Vinci surgical systems in the US and OUS for the periods
presented (amounts shown in thousands):
Approximate Procedures (Thousands) 	Percentage Change*
Year Ended December 31, 	Year Ended December 31,
2025 	2024 	2023 	2025 	2024
U.S.
General Surgery 	1,250 	1,063 	896 	18 % 	19 %
Gynecology 	468 	423 	390 	11 % 	8 %
Urology 	201 	186 	173 	8 % 	7 %
Other 	93 	85 	73 	11 % 	18 %
Total U.S. 	2,012 	1,757 	1,532 	15 % 	15 %
OUS
Urology 	507 	435 	381 	16 % 	14 %
General Surgery 	334 	254 	188 	31 % 	35 %
Gynecology 	181 	142 	110 	28 % 	29 %
Other 	119 	95 	75 	27 % 	28 %
Total OUS 	1,141 	926 	754 	23 % 	23 %
Total Procedures 	3,153 	2,683 	2,286 	18 % 	17 %
___________
* The approximate procedures are rounded to thousands, but the percentage changes are based on unrounded approximate procedures.
Overall. Total da Vinci procedures performed by our customers grew approximately 18% in 2025, compared to approximately 17% in 2024, largely
attributable to growth in U.S. general surgery, OUS general surgery (particularly cancer), OUS urologic surgery, and U.S. gynecologic surgery procedures.
U.S. Procedures. U.S. da Vinci procedures grew approximately 15% in 2025, compared to approximately 15% in 2024. The 2025 U.S. procedure
growth was largely attributable to growth in general surgery and gynecologic surgery procedures.
U.S. General Surgery. General surgery procedures in the U.S. grew approximately 18% in 2025, compared to approximately 19% in 2024, most
notably cholecystectomy, hernia repair, appendectomy, and colorectal procedures. The number of U.S. da Vinci bariatric procedures performed declined in
the high-single digits in 2025 compared to 2024. Cholecystectomy, inguinal and ventral hernia repair, and appendectomy procedures contributed the most
incremental procedures in 2025. Cholecystectomy, inguinal and ventral hernia repair, and colorectal procedures contributed the most incremental
procedures in 2024.
Given the already very high level of laparoscopic techniques used in cholecystectomy procedures, it remains unclear to what extent robotic-assisted
surgery using da Vinci may continue to be adopted.
We believe that growth in hernia repair procedures using da Vinci reflects improved clinical outcomes within certain patient populations, as well as
potential cost benefits relative to certain alternative treatments. We believe that hernia repair procedures represent a significant opportunity with the
potential to drive growth in future periods. However, given the differences in surgical complexity associated with the treatment of various hernia patient
populations and varying surgeon opinions regarding optimal surgical technique, it is difficult to estimate the timing of and to what extent hernia repair
procedure volume will grow in the future. We expect a large portion of hernia repairs will continue to be performed via different modalities of surgery.
Growth in appendectomy procedures reflects greater access to acute and after-hours care. We believe that our stapling instruments may minimize
complications and reduce operative times in emergent and after-hours settings. Similar to cholecystectomy procedures, there is currently a high level of
laparoscopic techniques used in appendectomy procedures.
The adoption of da Vinci for colorectal procedures, which includes several underlying procedures, such as low anterior resections for rectal cancers
and certain colon procedures for benign and cancerous conditions, has been ongoing for several years and is supported by certain technologies, such as our
da Vinci energy and da Vinci stapler products as well as our Integrated Table Motion product.
U.S. Gynecology. Gynecology procedures in the U.S. grew approximately 11% in 2025, compared to approximately 8% in 2024. Benign hysterectomy
procedures contributed the most incremental procedures in 2025 and 2024. The growth in benign hysterectomy procedures has been largely driven by use
of our systems by new da Vinci surgeons.
70

-- 71 of 187 --

Table of Contents
OUS Procedures. OUS da Vinci procedures grew approximately 23% in 2025, compared to approximately 23% in 2024. In OUS markets, robotic-
assisted procedures are at varying states of adoption in different areas of the world with cancer procedures outpacing benign procedures. We saw strong
procedure growth in South Korea and India during 2025. We believe that growth in these global markets is being driven by increased acceptance among
surgeons and health systems, supported by expanded global evidence validating the clinical and economic value of da Vinci procedures as well as increased
surgeon training. In South Korea, the doctor strikes that began in the first quarter of 2024 have ended; we saw a recovery in the number of procedures
performed in 2025, and the growth rate in South Korea exceeded the overall OUS procedure growth rate.
OUS General Surgery. OUS general surgery procedures grew approximately 31% in 2025, compared to approximately 35% in 2024, most notably
colorectal and hernia repair procedures. Colorectal procedures contributed the most incremental procedures in 2025 and 2024, aided by improved clinical
outcomes relative to open and laparoscopic techniques within certain patient populations, along with enabling technologies, such as our da Vinci energy
and da Vinci stapler products as well as our Integrated Table Motion product. The growth in hernia repair procedures has largely been driven by increased
use of our systems by new da Vinci surgeons.
OUS Urology. OUS urology procedures have been a consistent contributor to our overall procedure growth. OUS urology procedures grew
approximately 16% in 2025, compared to approximately 14% in 2024, most notably prostatectomy and partial nephrectomy procedures. In the U.S., da
Vinci is the standard of care for the surgical treatment of prostate cancer, and we believe that the growth is largely aligned with surgical volumes of prostate
cancer. In OUS markets, prostatectomy is at varying states of adoption in different areas of the world but is the largest overall da Vinci procedure. In 2025,
we saw consistent growth in OUS prostatectomy procedures compared to 2024.
Kidney cancer procedures have also been a strong contributor to our recent global urology procedure growth. Clinical publications have demonstrated
that the use of a da Vinci surgical system increases the likelihood that a patient will receive nephron sparing surgery through a partial nephrectomy, which
is typically the surgical society guideline recommended therapy.
OUS Gynecology. OUS gynecology procedures grew approximately 28% in 2025, compared to approximately 29% in 2024, most notably
hysterectomy procedures. The growth in hysterectomy procedures has been largely driven by increased use of our systems by new da Vinci surgeons.
Ion Procedures
The adoption of robotic-assisted bronchoscopy using the Ion endoluminal system has the potential to grow if it can offer greater patient value than non-
Ion alternatives and competitive total economics for healthcare providers.
In 2025, approximately 144,100 biopsy procedures were performed with Ion systems, compared to approximately 95,500 in 2024 and approximately
53,800 in 2023. The increase in our overall procedure volume in 2025 reflects a larger installed base of approximately 995 systems, an increase of 24%
compared to the installed base of approximately 805 systems as of 2024. Currently, the vast majority of Ion biopsy procedures are performed in the U.S.
System Demand
System placements are driven by procedure growth in most geographic markets. In some markets, system placements are constrained by regulation. In
geographies where da Vinci procedure adoption is in an early stage or system placements are constrained by regulation, system sales will precede
procedure growth.
71

-- 72 of 187 --

Table of Contents
The following table summarizes our da Vinci and Ion placements during the periods presented (amounts shown in ones):
Year Ended December 31,
2025 	2024 	2023
Da Vinci Surgical System Placements by Region
U.S. unit placements 	987 	800 	666
OUS unit placements 	734 	726 	704
Total unit placements 	1,721 	1,526 	1,370
________
Includes the following number of units involving trade-ins: 	437 	150 	240
Ion System Placements by Region
U.S. unit placements 	169 	253 	211
OUS unit placements 	26 	18 	2
Total unit placements 	195 	271 	213
During 2025, 1,721 da Vinci surgical systems were placed compared to 1,526 systems during 2024. By geography, 987 systems were placed in the
U.S., 342 in Europe, 269 in Asia, and 123 in other markets during 2025, compared to 800 systems placed in the U.S., 309 in Europe, 321 in Asia, and 96 in
other markets during 2024. The increase in total units placed during 2025 compared to 2024, reflected incremental demand for our next-generation da Vinci
5 surgical system, an increase in trade-ins of our fourth-generation da Vinci surgical systems, and continued demand for additional capacity by our
customers as a result of procedure growth, partially offset by a smaller number of third-generation da Vinci surgical systems available for trade-in. The
2025 da Vinci surgical system placements included 870 da Vinci 5 surgical systems, compared with 362 in 2024.
As of December 31, 2025, we had a da Vinci surgical system installed base of approximately 11,106 systems compared to approximately 9,902
systems as of December 31, 2024. By geography, 6,364 systems were in the U.S., 2,168 in Europe, 1,993 in Asia, and 581 in the rest of the world. The
incremental system installed base reflects continued procedure growth and further customer validation that robotic-assisted surgery addresses their
Quintuple Aim objectives.
During 2025, 195 Ion systems were placed compared to 271 systems during 2024. By geography, 169 systems were placed in the U.S., 16 in Europe, 7
in Asia, and 3 in other markets during 2025, compared to 253 systems placed in the U.S., 14 in Europe, and 4 in Asia during 2024. In the U.S., where we
estimate that the Ion penetration of lung biopsies is approaching the halfway point of all lung biopsies performed, our customers’ focus has begun to shift
from increasing capacity to increasing utilization of their existing systems. As of December 31, 2025, we had an Ion system installed base of approximately
995 systems, compared to an installed base of approximately 805 systems as of December 31, 2024.
We continue to see some customers challenged by staffing constraints, lower public funding of healthcare in certain markets (particularly in Europe
and Japan), and other financial pressures. As a result, we expect our customers to continue to be cautious in their overall capital spending. In addition,
system demand in China has been affected by increasing competition from domestic robotic-assisted surgical system manufacturers as well as a broader
central government focus on systematic governance. Targeting the healthcare sector, this campaign was initially launched by the Chinese government in
July 2023 and has resulted in heightened scrutiny by medical institutions with respect to initiating tenders, with some tenders being canceled or delayed
without a timeline. In 2025, the effects of this campaign, combined with the competitive dynamics in China and various measures related to industrial
policy, contributed to fewer systems being placed in China than we anticipated. Currently, the extent and impact of this campaign and the competitive
dynamics in China on our business remains uncertain.
We expect that future placements of da Vinci surgical systems will be impacted by a number of factors: supply chain risks; economic and geopolitical
factors; inflationary pressures; high interest rates; hospital staffing constraints; procedure growth rates; evolving system utilization and point-of-care
dynamics; capital replacement trends, including a declining number of older generation systems available for trade-in transactions; additional
reimbursements in various global markets, such as in Japan; the timing around governmental tenders and authorizations, as well as governmental actions
impacting the tender process, such as the governance campaign in China; hospitals’ response to the evolving healthcare environment; the timing of when
we receive regulatory clearance in our other OUS markets for our da Vinci 5, da Vinci X, da Vinci Xi, and da Vinci SP surgical systems and related
instruments; and the market response.
Demand may also be impacted by the competition we currently face, or expect to face, from companies offering products for open or MIS surgeries,
companies providing other therapeutic approaches for target clinical conditions, and companies developing diagnostic solutions that could serve as
alternatives to current or planned Intuitive offerings. Companies that have introduced products in the field of robotic-assisted medical procedures, or have
made explicit statements about their efforts to
(1)
(1)
72

-- 73 of 187 --

Table of Contents
enter the field, include, but are not limited to, the following: Beijing Surgerii Robotics Company Limited; CMR Surgical Ltd.; Distalmotion SA; Harbin
Sizhe Rui Intelligent Medical Equipment Co., Ltd.; Johnson & Johnson; Karl Storz SE & Co. KG; Medicaroid Corporation; Medtronic plc; meerecompany
Inc.; Noah Medical Corporation; Shandong Weigao Group Medical Polymer Company Ltd.; Shanghai Microport Medbot (Group) Co., Ltd.; Shenzhen
Edge Medical Co., Ltd.; and SS Innovations International, Inc.
Many of the above factors will also impact future demand for our Ion endoluminal system, as we extend our commercial offering into diagnostics,
along with additional factors associated with a new product introduction, including, but not limited to, our ability to optimize manufacturing and our supply
chain, competition, clinical data to demonstrate value, and customer acceptance.
Distribution Channels
We sell our products and services through direct sales organizations in the U.S., Europe (excluding Italy, Spain, Portugal, Greece, and Eastern
European countries), China (through our majority-owned joint ventures, Intuitive Surgical-Fosun Medical Technology (Shanghai) Co., Ltd. and Intuitive
Surgical-Fosun (HongKong) Co., Ltd. (collectively, the “Joint Venture”), with Fosun Pharma), Japan, South Korea, India, Taiwan, and Canada. In the U.S.
(for some government customers), China, and Japan, we also utilize certain distributors in addition to our direct sales organizations. In the remainder of our
OUS markets, we provide our products for sale through distributors.
Seasonality
More than half of the da Vinci procedures performed are for benign conditions, most notably hernia repairs, hysterectomies, and cholecystectomies.
These benign procedures and other short-term elective procedures tend to be more seasonal than cancer operations and surgeries for other life-threatening
conditions. Seasonality in the U.S. for procedures for benign conditions typically results in higher fourth quarter procedure volume when more patients
have met annual deductibles and lower first quarter procedure volume when deductibles are reset. Seasonality outside of the U.S. varies and is more
pronounced around local holidays and vacation periods, which have lower procedure volume.
System placements also vary due to seasonality, largely aligned with hospital budgeting cycles. On an annual basis, we typically place a higher
proportion of systems in the fourth quarter and a lower proportion in the first quarter as many customer budgets are reset.
Intuitive System Leasing
Since 2013, we have entered into sales-type and fixed-payment operating lease arrangements directly with certain qualified customers as a way to offer
customers flexibility in how they acquire systems and expand their robotic-assisted programs while leveraging our balance sheet. These leases generally
have commercially competitive terms as compared to other third-party entities that offer equipment leasing. We also enter into usage-based operating lease
arrangements with qualified customers that have committed da Vinci programs where we charge for the system and service as procedures are performed,
offering greater predictability in costs for customers. We believe that all of these alternative financing structures have been effective and well-received, and
we are willing to expand the proportion of any of these structures based on customer needs and demand.
We include systems placed under fixed-payment and usage-based operating lease arrangements, as well as sales-type lease arrangements, in our system
placement and installed base disclosures. We exclude operating lease-related revenue, including usage-based revenue, and Ion system revenue from our da
Vinci surgical system average selling price (“ASP”) computations.
73

-- 74 of 187 --

Table of Contents
The following table summarizes our da Vinci and Ion system placements under leasing arrangements for the periods presented (amounts in ones):
Year Ended December 31,
2025 	2024 	2023
Da Vinci Surgical System Placements Under Leasing Arrangements
Fixed-payment operating lease arrangements 	376 	309 	304
Usage-based operating lease arrangements 	496 	467 	355
Total da Vinci surgical system placements under operating lease arrangements 	872 	776 	659
% of Total da Vinci surgical system placements 	51% 	51% 	48%
Sales-type lease arrangements 	40 	88 	45
Total da Vinci surgical system placements under leasing arrangements 	912 	864 	704
Ion System Placements Under Leasing Arrangements
Fixed-payment operating lease arrangements 	43 	85 	63
Usage-based operating lease arrangements 	53 	68 	54
Total Ion system placements under operating lease arrangements 	96 	153 	117
% of Total Ion system placements 	49% 	56% 	55%
Sales-type lease arrangements 	10 	4 	5
Total Ion system placements under leasing arrangements 	106 	157 	122
Variable lease revenue recognized from usage-based operating lease arrangements has been included in our operating lease metrics herein. Operating
lease revenue has grown at a faster rate than overall systems revenue and was $874 million, $654 million, and $501 million in 2025, 2024, and 2023,
respectively, of which $531 million, $338 million, and $217 million, respectively, was variable lease revenue related to our usage-based operating lease
arrangements.
Revenue for systems sold or placed under a sales-type lease arrangement is recognized upfront whereas revenue for fixed-payment operating lease
arrangements is recognized on a straight-line basis over time. Therefore, in a period when the number of operating lease placements increases as a
proportion of total system placements, total systems revenue is reduced, which can create volatility in the systems revenue recognized in any given period.
We generally set fixed-payment and usage-based operating lease arrangements’ pricing at a modest premium relative to purchased systems reflecting the
time value of money and, in the case of usage-based operating lease arrangements, the risk that system utilization may fall short of anticipated levels.
Revenue for usage-based operating lease arrangements is recognized as the system is used to perform procedures. Variable usage-based arrangements
create better matching of reimbursements and cost for our customers. They also reduce our customers’ overall risk and need for capital outlay. However,
because the number of procedures performed in any given period can vary significantly for many reasons, including but not limited to healthcare
emergencies, alternative treatment options, and patient preferences, revenue recognized from these arrangements can be highly volatile.
Customers generally do not have the right to exit or terminate a fixed-payment lease without incurring a penalty. Generally, lease transactions generate
similar gross profit margins as our sale transactions. However, because of the variability in revenue recognized for usage-based lease arrangements,
including our customers’ ability to exit or cancel those arrangements prior to the end of the lease term, there is no guarantee that we will recuperate the cost
of the leased system, which, in turn, could adversely impact our gross profit margins if utilization of those systems are different than our expectations.
74

-- 75 of 187 --

Table of Contents
The following table summarizes our da Vinci and Ion systems installed base under operating leasing arrangements as of the periods presented (amounts
in ones):
As of December 31,
2025 	2024 	2023
Da Vinci Surgical System Installed Base under Operating Leasing Arrangements
Fixed-payment operating lease arrangements 	1,400 	1,307 	1,204
Usage-based operating lease arrangements 	1,810 	1,492 	1,023
Total da Vinci surgical system installed base under operating lease arrangements 	3,210 	2,799 	2,227
Ion System Installed Base under Operating Leasing Arrangements
Fixed-payment operating lease arrangements 	110 	126 	96
Usage-based operating lease arrangements 	250 	193 	118
Total Ion system installed base under operating lease arrangements 	360 	319 	214
Our exposure to the credit risks relating to our lease financing arrangements may increase if our customers are adversely affected by economic
pressures or uncertainty, changes in healthcare laws, coverage and reimbursement, or other customer-specific factors. As a result of these macroeconomic
factors impacting our customers, we may be exposed to defaults under our lease financing arrangements. Moreover, usage-based operating lease
arrangements generally contain no minimum payments; therefore, customers may exit such arrangements without paying a financial penalty to us.
For some operating lease arrangements, our customers are provided with the right to purchase the leased system at certain points during and/or at the
end of the lease term. Revenue generated from customer purchases of systems under operating lease arrangements (“Lease Buyouts”) was $130 million,
$109 million, and $74 million in 2025, 2024, and 2023, respectively. We expect that revenue recognized from customer exercises of buyout options will
fluctuate based on the timing of when, and if, customers choose to exercise such buyout options.
Systems revenue is also affected by the proportion of system placements under operating lease arrangements, which can fluctuate period to period
depending on customer preference, recurring fixed-payment and usage-based operating lease revenue, Lease Buyouts, product mix, ASPs, trade-in
activities, customer mix, and specified-price trade-in rights. We generally do not provide specified-price trade-in rights or upgrade rights at the time of a
system purchase; however, in conjunction with the rollout of our next-generation da Vinci 5 surgical system, there may be limited instances in which
certain arrangements include specified-price trade-in rights. For trade-in activities involving operating lease upgrades, depending on the timing and terms
of the upgrade transaction, the amount of revenue generated on the initial and new lease arrangements may not, in the aggregate, generate the same amount
of revenue that a traditional sale and trade-in transaction would. Systems revenue increased 26% to $2.47 billion in 2025. Systems revenue increased 17%
to $1.97 billion in 2024. Systems revenue remained flat at $1.68 billion in 2023.
Procedure/Product Mix
Our da Vinci surgical systems are generally used for soft tissue surgery for areas of the body between the pelvis and the neck, primarily in general,
gynecologic, urologic, cardiothoracic, and head and neck surgical procedures. Within these categories, procedures range in complexity from cancer and
other highly complex procedures to less complex procedures for benign conditions. Cancer and other highly complex procedures tend to be reimbursed at
higher rates than less complex procedures for benign conditions. Thus, hospitals are more sensitive to the costs associated with treating less complex,
benign conditions. Our strategy is to provide hospitals with attractive clinical and economical solutions across the spectrum of procedure complexity. Our
fully featured da Vinci 5 and da Vinci Xi surgical systems with advanced instruments (including da Vinci energy and da Vinci stapler products) and our
Integrated Table Motion product target the more complex procedure segment. Our da Vinci X surgical system is targeted toward price-sensitive geographic
markets and procedures. Our da Vinci SP surgical system complements the da Vinci 5, da Vinci X, and da Vinci Xi surgical systems by enabling surgeons
to access narrow workspaces.
Revenue
We recognize up-front revenue from the placement of da Vinci surgical systems through sales or sales-type lease arrangements. Recurring revenue is
recognized over time from the placement of da Vinci surgical systems under fixed-payment or usage-based operating lease arrangements, as well as from
service arrangements. Recurring revenue is also recognized up-front from the sale of instruments and accessories.
75

-- 76 of 187 --

Table of Contents
The da Vinci surgical system generally sells for between $0.7 million and $3.1 million (generally inclusive of one year of service), depending on the
model, configuration, and geography, and represents a significant capital equipment investment for our customers when purchased. Our instruments and
accessories have limited lives and will either expire or wear out as they are used in surgery, at which point they need to be replaced. We generally earn
between $900 and $3,700 of instruments and accessories revenue per surgical procedure performed, depending on the type and complexity of the specific
procedures performed and the number and type of instruments used. We typically enter into service contracts at the time systems are sold or leased at an
annual fee between $95,000 and $225,000, depending on the configuration of the underlying system and the composition of the services offered under the
contract. Our system sale arrangements generally include a five-year period of service, with the first year of service generally included in the selling price
of the system. These service contracts have generally been renewed at the end of the initial contractual service periods.
We generate revenue from our Ion endoluminal system in a business model consistent with the da Vinci surgical system model described above. We
generate up-front revenue from the placement of Ion systems through sales or sales-type lease arrangements and recurring revenue over time through fixed-
payment or usage-based operating lease arrangements. We also earn recurring revenue from the sales of instruments, accessories, and services. The Ion
endoluminal system generally sells for between $500,000 and $815,000 (generally inclusive of one year of service). Our instruments and accessories have
limited lives and will either expire or wear out as they are used in procedures, at which point they need to be replaced. We typically enter into service
contracts at the time systems are sold or leased at an annual fee between $55,000 and $70,000.
Additionally, as part of our ecosystem of products and services, we provide a portfolio of learning offerings and digital solutions. We do not currently
generate material revenue from these offerings.
The following table summarizes our revenue for the periods presented (amounts in millions):
Year Ended December 31,
2025 	2024 	2023
Revenue
Instruments and accessories 	$ 	6,018.9 $ 	5,079.0 $ 	4,276.6
Systems 	2,473.7 	1,966.0 	1,679.7
Total product revenue 	8,492.6 	7,045.0 	5,956.3
Service 	1,572.1 	1,307.1 	1,167.8
Total revenue 	$ 	10,064.7 $ 	8,352.1 $ 	7,124.1
U.S. 	$ 	6,815.8 $ 	5,589.4 $ 	4,688.6
OUS 	3,248.9 	2,762.7 	2,435.5
Total revenue 	$ 	10,064.7 $ 	8,352.1 $ 	7,124.1
% of Revenue — U.S. 	68% 	67% 	66%
% of Revenue — OUS 	32% 	33% 	34%
Total revenue increased in 2025 compared to 2024, primarily driven by 19% higher instruments and accessories revenue, 26% higher systems revenue,
and 20% higher service revenue.
We generally sell our products and services in local currencies where we have direct distribution channels. Revenue denominated in foreign currencies
as a percentage of total revenue was approximately 24%, 24%, and 25% in 2025, 2024, and 2023, respectively. Fluctuations in foreign currency exchange
rates had a favorable impact on OUS total revenue of $31 million for 2025 and an unfavorable impact on OUS total revenue of $34 million for 2024. The
impact of foreign currency exchange rate fluctuations was calculated by comparing the USD value of foreign-currency-denominated transactions translated
at exchange rates in effect during the period in which each order was recorded to the USD value of those same transactions translated at exchange rates in
effect during the comparable prior-year period, net of the impacts from foreign currency hedges.
We believe that U.S. revenue has historically accounted for the large majority of total revenue due to U.S. patients’ ability to choose their provider and
method of treatment, reimbursement structures supportive of innovation and MIS, and our initial investments focused on U.S. infrastructure. We have been
investing in our business in OUS markets, and our OUS procedures have grown faster in proportion to U.S. procedures. We expect that our OUS
procedures and revenue will make up a greater portion of our business in the long term.
Product Revenue
Instruments and accessories revenue increased by 19% to $6.02 billion for 2025, compared to $5.08 billion for 2024. The increase in instruments and
accessories revenue was primarily driven by approximately 18% higher da Vinci procedure volume,
76

-- 77 of 187 --

Table of Contents
approximately 51% higher Ion procedure volume, and incremental growth of SP procedures, partially offset by an unfavorable procedure mix. The 2025
U.S. da Vinci procedure growth was approximately 15%, driven primarily by strong growth in general surgery procedures, most notably cholecystectomy,
hernia repair, appendectomy, and colorectal procedures, and gynecologic procedures. The number of U.S. da Vinci bariatric procedures performed declined
in the high-single digits in 2025 compared to 2024. The 2025 OUS da Vinci procedure growth was approximately 23%, driven by growth in general
surgery procedures, most notably colorectal and hernia repair procedures; urologic procedures, most notably prostatectomy and partial nephrectomy
procedures; and gynecologic procedures. Geographically, the 2025 OUS da Vinci procedure growth was driven by several markets with particular strength
in South Korea and India.
Systems revenue increased by 26% to $2.47 billion for 2025, compared to $1.97 billion for 2024. The higher system revenue for the year ended
December 31, 2025, was primarily driven by an increase in da Vinci surgical system placements, including a decrease in the proportion of da Vinci surgical
system placements under operating leases, higher operating lease revenue, and higher ASPs.
Operating lease revenue, including the contribution from Ion systems, was $874 million for 2025, of which $531 million was variable lease revenue
related to usage-based arrangements, compared to $654 million for 2024, of which $338 million was variable lease revenue related to usage-based
arrangements. Revenue from Lease Buyouts was $130 million for 2025, compared to $109 million for 2024. We expect revenue from Lease Buyouts to
fluctuate period to period depending on the timing of when, and if, customers choose to exercise buyout options embedded in their leases.
The da Vinci surgical system ASP, excluding systems placed under fixed-payment or usage-based operating lease arrangements, Ion systems, and the
impact of specified-price trade-in rights, was approximately $1.60 million for 2025, compared to approximately $1.50 million for 2024. The higher ASP
for 2025, was largely driven by favorable product mix, including from da Vinci 5 sales, partially offset by higher pricing discounts and more trade-ins. ASP
fluctuates from period to period based on geographic and product mix, product pricing, systems placed involving trade-ins, and changes in foreign
exchange rates.
Service Revenue
Service revenue increased by 20% to 1.57 billion for 2025, compared to $1.31 billion for 2024. The increase in 2025 was primarily driven by a larger
installed base of systems producing service revenue and favorable product mix, particularly from da Vinci 5 surgical system placements.
Recurring Revenue
Recurring revenue represents the revenue recognized from instruments and accessories, service, and operating lease arrangements. Recurring revenue
is an operating measure that we use to assess the strength of our installed base, system utilization, and procedure adoption.
Recurring revenue during the periods presented was as follows:
Year Ended December 31,
2025 	2024 	2023
Instruments and accessories revenue 	$ 	6,018.9 $ 	5,079.0 $ 	4,276.6
Service revenue 	1,572.1 	1,307.1 	1,167.8
Operating lease revenue 	874.3 	654.2 	500.5
Total recurring revenue 	$ 	8,465.3 $ 	7,040.3 $ 	5,944.9
% of Total revenue 	84% 	84% 	83%
77

-- 78 of 187 --

Table of Contents
Gross Profit
Product
Our product gross profit during the periods presented was as follows (dollars in millions):
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Product gross profit 	$ 	5,626.5 $ 	4,731.9 $ 	3,914.5 $ 	894.6 	19 % $ 	817.4 	21 %
Product gross profit margin 	66.3% 	67.2% 	65.7%
________
Includes the following expenses:
Share-based compensation 	$ 	120.7 $ 	98.5 $ 	83.4 $ 	22.2 	23 % $ 	15.1 	18 %
Intangible asset amortization 	$ 	9.0 $ 	11.5 $ 	13.5 $ 	(2.5) 	(22) % $ 	(2.0) 	(15) %
Product gross profit margin decreased in 2025 compared to 2024, primarily driven by new tariffs, incremental fixed overhead costs, including
depreciation expense associated with expanded manufacturing capacity, and higher costs associated with our da Vinci 5 surgical system, partially offset by
lower excess and obsolete inventory charges. Our capital expenditures increased in 2024, as we continued to build the infrastructure needed to scale our
business and, as a result, depreciation expense increased in 2025. We expect depreciation expense to continue to increase in 2026.
In 2025, new and incremental tariffs were imposed on goods imported to the U.S. We import raw materials and finished goods from sources outside of
the U.S., which were subject to tariffs, including but not limited to our endoscopes, which are primarily manufactured in Germany. If the tariffs continue to
be in effect in 2026 as currently implemented, we expect the associated expense to increase in 2026. The ultimate impact of tariffs will depend on various
factors, including the amount, scope, timing, and nature of the tariffs.
Service
Our service gross profit during the periods presented was as follows (dollars in millions):
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Service gross profit 	$ 	1,015.8 $ 	902.3 $ 	815.0 $ 	113.5 	13 % $ 	87.3 	11 %
Service gross profit margin 	64.6% 	69.0% 	69.8%
________
Includes the following expenses:
Share-based compensation expense 	$ 	34.5 $ 	30.5 $ 	28.2 $ 	4.0 	13 % $ 	2.3 	8 %
Intangible asset amortization 	$ 	0.7 $ 	0.8 $ 	0.9 $ 	(0.1) 	(13) % $ 	(0.1) 	(11) %
Service gross profit margin decreased in 2025 compared to 2024, primarily driven by higher costs associated with our da Vinci 5 surgical system, an
unfavorable repair mix, incremental fixed costs, including depreciation expense, and new tariffs, partially offset by lower logistics costs and lower excess
and obsolete inventory charges.
Selling, General and Administrative Expenses
Selling, general and administrative expenses include costs for sales, marketing, and administrative personnel, sales and marketing activities, trade show
expenses, legal expenses, regulatory fees, and general corporate expenses.
(1)
(1)
(1)
(1)
78

-- 79 of 187 --

Table of Contents
Selling, general and administrative expenses during the periods presented were as follows (dollars in millions):
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Selling, general and administrative 	$ 	2,385.0 $ 	2,140.0 $ 	1,963.9 $ 	245.0 	11 % $ 	176.1 	9 %
% of Total revenue 	24% 	26% 	28%
________
Includes the following expenses:
Share-based compensation 	$ 	346.5 $ 	304.5 $ 	274.8 $ 	42.0 	14 % $ 	29.7 	11 %
Intangible asset amortization 	$ 	0.7 $ 	2.4 $ 	3.3 $ 	(1.7) 	(71) % $ 	(0.9) 	(27) %
Selling, general and administrative expenses increased in 2025 compared to 2024, primarily driven by higher headcount and personnel-related
expenses, including share-based compensation expense and variable compensation expenses, and a higher charitable contribution to the Intuitive
Foundation.
In 2025, we made a charitable contribution of $70 million to the Intuitive Foundation, a not-for-profit organization whose mission is to reduce the
global burden of disease and suffering through research, education, and philanthropy aimed at better outcomes for patients around the globe. In 2024, we
made a charitable contribution of $45 million to the Intuitive Foundation.
Research and Development Expenses
Research and development costs are expensed as incurred. Research and development expenses include costs associated with the design, development,
testing, and significant enhancement of our products. Our main product development initiatives include multi-port, Ion, and SP platform investments and
our digital products and services.
Research and development expenses during the periods presented were as follows (dollars in millions):
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Research and development 	$ 	1,311.8 $ 	1,145.3 $ 	998.8 $ 	166.5 	15 % $ 	146.5 	15 %
% of Total revenue 	13% 	14% 	14%
________
Includes the following expenses:
Share-based compensation 	$ 	301.1 $ 	254.6 $ 	211.8 $ 	46.5 	18 % $ 	42.8 	20 %
Intangible asset-related charges 	$ 	9.8 $ 	7.8 $ 	13.5 $ 	2.0 	26 % $ 	(5.7) 	(42) %
Research and development expenses increased in 2025 compared to 2024, primarily driven by project costs incurred to support a broader set of product
development initiatives and higher headcount and personnel-related expenses, including share-based compensation expense.
Research and development expenses fluctuate with project timing. Based upon our broader set of product development initiatives and the stage of the
underlying projects, we expect to continue to make substantial investments in research and development and anticipate that research and development
expenses will continue to increase in the future.
Interest and Other Income, Net
Interest and other income, net during the periods presented was as follows (dollars in millions):
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Interest and other income 	$ 	365.9 $ 	324.9 $ 	192.1 $ 	41.0 	13 % $ 	132.8 	69 %
% of Total revenue 	4% 	4% 	3%
Interest and other income, net, increased in 2025 compared to 2024, primarily driven by higher interest income earned (due to higher average cash and
investment balances).
(1)
(1)
(1)
(1)
79

-- 80 of 187 --

Table of Contents
Income Tax Expense
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Income tax expense 	$ 	434.8 $ 	336.3 $ 	141.6 $ 	98.5 	29 % $ 	194.7 	138 %
Effective income tax rate 	13.1% 	12.6% 	7.2%
Our higher effective tax rate for 2025 compared to 2024 was primarily due to lower tax rate benefits from federal research and development credits and
excess tax benefits associated with employee equity plans, partially offset by lower taxes on foreign earnings.
Our provision for income taxes for 2023 reflected Swiss tax benefits of $92.3 million, net of a $67.3 million valuation allowance, related to certain tax
assets recorded by our Swiss entity. In addition, a one-time net benefit of $67.1 million was recorded from the re-measurement of our Swiss deferred tax
assets resulting from the Swiss cantonal tax rate increase enacted in December 2023 for years after 2024 as well as a Swiss cantonal tax rate increase from
the discontinuation of our 2017 Swiss tax ruling, which was deemed effective as of January 1, 2023.
Our provision for income taxes for 2025 and 2024 included excess tax benefits associated with employee equity plans of $246 million and $223
million, respectively, which reduced our effective tax rate by 7.4 and 8.4 percentage points, respectively. The amount of excess tax benefits or deficiencies
will fluctuate from period to period based on the price of our stock, the volume of share-based awards settled or vested, and the value assigned to employee
equity awards under GAAP, which results in increased income tax expense volatility.
On July 4, 2025, OBBBA was enacted, introducing amendments to U.S. tax laws with various effective dates from 2025 to 2027. The changes
introduced by OBBBA did not have a material impact on our effective tax rate for 2025.
In 2021, the OECD established an inclusive framework on base erosion and profit shifting and agreed on a two-pillar solution to global taxation,
focusing on global profit allocation and a 15% global minimum effective tax rate (“Pillar Two”). The OECD issued Pillar Two model rules and continues to
release guidance on these rules. In January 2025, the OECD released additional guidance, which includes a limitation on certain deferred tax assets
recognized after November 2021. Many countries have adopted new tax laws to align with the global minimum tax. We considered the applicable tax law
changes on Pillar Two implementation in the relevant countries, and there was no material impact to our tax provision in 2025. We will continue to evaluate
the impact of these tax law changes on future reporting periods.
We file federal, state, and foreign income tax returns in many jurisdictions in the U.S. and OUS. Years before 2020 are considered closed for
significant jurisdictions. Certain of our unrecognized tax benefits could change due to activities of various tax authorities, including evolving
interpretations of existing tax laws in the jurisdictions in which we operate, potential assessment of additional tax, possible settlement of audits, or through
normal expiration of various statutes of limitations, which could affect our effective tax rate in the period in which they change.
We are subject to the examination of our income tax returns by the Internal Revenue Service and other tax authorities. The outcome of these audits
cannot be predicted with certainty. Management regularly assesses the likelihood of adverse outcomes resulting from these examinations to determine the
adequacy of our provision for income taxes. If any issues addressed in our tax audits are resolved in a manner not consistent with management’s
expectations, we could be required to adjust our provision for income taxes in the period such resolution occurs.
Net Income Attributable to Noncontrolling Interest in Joint Venture
Year Ended December 31, 	2025 vs 2024 	2024 vs 2023
2025 	2024 	2023 	$ Change 	% Change 	$ Change 	% Change
Net income attributable to
noncontrolling interest 	$ 	20.6 $ 	14.9 $ 	19.3 $ 	5.7 	38 % $ 	(4.4) 	(23)%
The Company’s Joint Venture is owned 60% by us and 40% by Fosun Pharma and is located in China. In 2019, the Joint Venture began direct
operations for da Vinci products and services in China. Following approval in June 2023 by China’s NMPA for a local version of our da Vinci Xi surgical
system, in August 2023, our Intuitive-Fosun Pharma Joint Venture received a manufacturing license that permits the Joint Venture to manufacture our da
Vinci Xi surgical system for sale to customers in China.
80

-- 81 of 187 --

Table of Contents
Liquidity and Capital Resources
Sources and Uses of Cash and Cash Equivalents
Our principal source of liquidity is cash provided by our operations. Cash and cash equivalents plus short- and long-term investments increased by
$0.20 billion to $9.03 billion as of December 31, 2025, from $8.83 billion as of December 31, 2024, primarily as a result of cash provided by operating
activities and proceeds from stock option exercises and employee stock purchases, partially offset by cash used for repurchases of common stock, capital
expenditures, and taxes paid related to net share settlements of equity awards.
Our cash requirements depend on numerous factors, including acceptance of our products, the resources we devote to developing and supporting our
products, and other factors. We expect to continue to devote substantial resources to expand procedure adoption and acceptance of our products. We have
made substantial investments in our commercial operations, product development activities, facilities, and intellectual property. Based on our business
model, we anticipate that we will continue to be able to fund future growth through cash provided by our operations. We believe that our current cash, cash
equivalents, and investment balances, together with income to be derived from our business, will be sufficient to meet our liquidity requirements for the
foreseeable future. However, we may experience reduced cash flow from operations as a result of macroeconomic and geopolitical headwinds.
As of December 31, 2025, $1.06 billion of our cash, cash equivalents, and investments was held by foreign subsidiaries. We intend to repatriate
earnings from our Swiss and Dutch subsidiaries and our joint venture in Hong Kong, as needed, since the U.S. and foreign tax implications of such
repatriations are not expected to be significant. We will continue to indefinitely reinvest earnings from the rest of our foreign subsidiaries and do not expect
the tax implications of repatriating these earnings to be significant.
See “Item 7A. Quantitative and Qualitative Disclosures About Market Risk” for discussion on the impact of interest rate risk and market risk on our
investment portfolio.
Consolidated Cash Flow Data
The following table summarizes our cash flows for the periods presented (in millions):
Year Ended December 31,
2025 	2024 	2023
Net cash provided by (used in):
Operating activities 	$ 	3,030.5 $ 	2,415.0 $ 	1,813.8
Investing activities 	665.8 	(3,272.8) 	(360.1)
Financing activities 	(2,364.1) 	150.9 	(287.6)
Effect of exchange rates on cash, cash equivalents, and restricted cash 	12.8 	(0.8) 	3.3
Net increase (decrease) in cash, cash equivalents, and restricted cash 	$ 	1,345.0 $ 	(707.7) $ 	1,169.4
Operating Activities
In 2025, net cash provided by operating activities of $3.03 billion exceeded our net income of $2.88 billion, primarily due to the following factors:
1. Our net income included non-cash charges of $1.43 billion, consisting primarily of share-based compensation of $788 million and depreciation
expense and losses on the disposal of property, plant, and equipment of $615 million.
2. Changes in operating assets and liabilities resulted in $1.27 billion of cash used in operating activities during the year ended December 31, 2025.
Inventory increased by $1.06 billion, primarily to address the growth in our business and to mitigate risks of disruption that could arise from
global supply chain shortages. We also transferred systems for leasing to our customers from inventory to property, plant, and equipment of $809
million to support the expansion of our leasing business. These uses of cash were partially offset by the return to inventory of leased systems of
$106 million. Refer to Note 4 to the Consolidated Financial Statements for further details regarding inventory in the supplemental cash flow
information.
Cash used in operating activities was also driven by an increase in accounts receivable of $302 million, primarily due to increased sales and the
timing of billings. Prepaid and other assets increased by $187 million, primarily driven by an increase in prepaid expenses due to timing, an
increase in lease incentive assets associated with operating leases, and new and extended facilities leases. The unfavorable impact of these items
on cash provided by operating activities was partially offset by an increase in accrued compensation and employee benefits of $113 million,
primarily due to higher
81

-- 82 of 187 --

Table of Contents
variable compensation and higher headcount; an increase in deferred revenue of $75 million, primarily due to an increased volume of sales and
service contracts; and an increase in accounts payable of $58 million, primarily due to higher inventory purchases.
In 2024, net cash provided by operating activities of $2.42 billion exceeded our net income of $2.34 billion, primarily due to the following factors:
1. Our net income included non-cash charges of $997 million, consisting primarily of share-based compensation of $677 million, depreciation
expense and losses on the disposal of property, plant, and equipment of $445 million, and amortization of deferred commissions of $38 million,
partially offset by deferred income tax benefits of $135 million and accretion of investment discounts, net of losses on investments of $43 million.
2. The non-cash charges outlined above were partially offset by changes in operating assets and liabilities that resulted in $919 million of cash used
in operating activities during the year ended December 31, 2024. Inventory, including the transfer of equipment from inventory to property, plant,
and equipment of $615 million, partially offset by the transfer of property, plant, and equipment to inventory of $44 million, increased by
$830 million, primarily to address the growth in our business, expand our leasing business, and mitigate risks of disruption that could arise from
global supply chain shortages and manufacturing line transfers. Refer to Note 4 to the Consolidated Financial Statements for further details
regarding inventory in the supplemental cash flow information.
Cash used in operating activities was also driven by an increase in prepaid and other assets of $232 million, primarily driven by new and extended
lessee operating lease arrangements and deferred commissions as a result of operating leasing arrangements with customers. Accounts receivable
increased by $96 million, primarily due to increased sales, as well as the timing of billings and collections. The unfavorable impact of these items
on cash provided by operating activities was partially offset by an increase in other liabilities of $108 million, primarily driven by new and
extended lessee operating lease arrangements. Also, accrued compensation and employee benefits increased by $99 million, primarily due to
higher headcount and higher variable compensation.
Investing Activities
Net cash provided by investing activities for 2025 consisted primarily of proceeds from maturities and sales of investments, net of purchases, of $1.22
billion, partially offset by $540 million paid for the acquisition of property, plant, and equipment.
Net cash used in investing activities for 2024 consisted primarily of purchases of investments, net of proceeds from maturities and sales, of
$2.16 billion and $1.11 billion paid for the acquisition of property, plant, and equipment.
Net cash used in investing activities for 2023 consisted primarily of $1.06 billion paid for the acquisition of property, plant, and equipment, partially
offset by proceeds from maturities and sales of investments, net of purchases, of $0.71 billion.
We invest predominantly in high quality, fixed income securities. Our investment portfolio may, at any time, contain investments in money market
funds, U.S. treasury and U.S. government agency securities, high-quality corporate notes and bonds, commercial paper, non-U.S. government agency
securities, and taxable and tax-exempt municipal notes.
Financing Activities
Net cash used in financing activities for 2025 consisted primarily of cash used in the repurchase of 4.8 million shares of our common stock for $2.3
billion and taxes paid on behalf of employees related to net share settlements of vested employee equity awards of $419 million, partially offset by cash
proceeds from stock option exercises and employee stock purchases of $350 million.
Net cash used in financing activities for 2024 consisted primarily of proceeds from stock option exercises and employee stock purchases of
$429 million, partially offset by cash used for taxes paid on behalf of employees related to net share settlements of vested employee equity awards of
$270 million.
Net cash used in financing activities for 2023 consisted primarily of cash used in the repurchase of approximately 1.7 million shares of our common
stock for $416 million and taxes paid on behalf of employees related to net share settlements of vested employee equity awards of $165 million, partially
offset by proceeds from stock option exercises and employee stock purchases of $296 million.
Capital Expenditures
We continue to build the infrastructure needed to scale and supply our customers with highly differentiated products manufactured in highly automated
factories to facilitate outstanding performance in product quality, availability, and cost. A significant portion of our investment involves the construction of
facilities to expand our manufacturing and commercial capabilities. We have also been vertically integrating key technologies to develop a more robust
supply chain and bring important products to market at attractive price points. These investments include increased ownership of our imaging
82

-- 83 of 187 --

Table of Contents
pipelines, and investments in strategic instruments and accessories technologies that allow us to serve our customers better. We intend to continue to fund
our capital investments with cash generated from operations.
Intuitive Ventures
In 2020, we launched Intuitive Ventures Fund I, an inaugural $100 million fund focused on investment opportunities in companies that share Intuitive’s
commitment to advancing positive outcomes in healthcare. As of December 31, 2025, we have invested $70 million of the $100 million.
In 2023, we launched Intuitive Ventures Fund II, a $150 million fund focused on investment opportunities in companies reimagining the future of
minimally invasive care. As of December 31, 2025, we have invested $30 million of the $150 million.
Contractual Obligations and Commercial Commitments
Operating leases. We lease spaces for our operations in the U.S. as well as in Japan, China, Israel, Mexico, Germany, South Korea, the United
Kingdom, India, and other countries. We also lease automobiles for certain sales and field service employees. These leases have varying terms of up to 20
years. Operating lease amounts include future minimum lease payments under all of our non-cancellable operating leases with an initial term in excess of
one year. Refer to Note 6 to the Consolidated Financial Statements included in Part II, Item 8 for further details.
Purchase commitments and obligations. Total purchase commitments and obligations as of December 31, 2025, are estimated to be approximately
$2.53 billion, of which $2.37 billion is expected to be due within a year. These amounts include an estimate of all open purchase orders and contractual
obligations in the ordinary course of business, including commitments with contract manufacturers and suppliers for which we have not received the goods
or services, commitments for capital expenditures, including construction-related activities, for which we have not received the goods or services, and
commitments for the acquisition and licensing of intellectual property. Approximately one third of our estimated purchase commitments and obligations are
facilities-related. Although open purchase orders are considered enforceable and legally binding, the terms generally allow us the option to cancel,
reschedule, or adjust our requirements based on our business needs prior to the delivery of goods or performance of services. In addition to the above, we
have committed to making potential future milestone payments to third parties as part of licensing, collaboration, and development arrangements. Payments
under these agreements generally become due and payable only upon achievement of certain developmental, regulatory, and/or commercial milestones. For
instances in which the achievement of these milestones is neither probable nor reasonably estimable, such contingencies have not been recorded on our
Consolidated Balance Sheets.
Off-Balance Sheet Arrangements
As of December 31, 2025, we did not have any significant off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation S-K
promulgated under the Exchange Act.
Critical Accounting Estimates
Our Consolidated Financial Statements are prepared in conformity with GAAP, which requires us to make judgments, estimates, and assumptions. See
“Note 2. Summary of Significant Accounting Policies,” in Notes to the Consolidated Financial Statements, which is included in “Item 8. Financial
Statements and Supplementary Data,” for a description of our significant accounting policies and methods used in the preparation of our Consolidated
Financial Statements. The methods, estimates, and judgments that we use in applying our accounting policies require us to make difficult and subjective
judgments, often as a result of the need to make estimates regarding matters that are inherently uncertain. Our most critical accounting estimates include:
• Standalone selling prices used to allocate the contract consideration to the individual performance obligations, which impacts revenue
recognition;
• Valuation of inventory, which impacts gross profit margins;
• Valuation of and assessment of the recoverability of intangible assets and goodwill and the estimated useful lives of intangible assets, which
primarily impacts gross profit margin or operating expenses when we record asset impairments or accelerate their amortization;
• Recognition and measurement of current and deferred income taxes (including the measurement of uncertain tax positions), which impact our
provision for taxes; and
• Estimate of probable loss associated with legal contingencies, which impacts accrued liabilities and operating expenses.
Revenue recognition. Our system sale arrangements contain multiple products and services, including system(s), system components, system
accessories, instruments, accessories, and services. Other than services, we generally deliver all of the
83

-- 84 of 187 --

Table of Contents
products upfront. Each of these products and services is a distinct performance obligation. System accessories, instruments, accessories, and services are
also sold on a standalone basis.
For multiple-element arrangements, revenue is allocated to each performance obligation based on its relative standalone selling price. Standalone
selling prices are based on observable prices at which we separately sell the products or services. If a standalone selling price is not directly observable,
then we estimate the standalone selling prices considering market conditions and entity-specific factors including, but not limited to, historical pricing data,
features and functionality of the products and services, geographies, type of customer, and market conditions. We regularly review standalone selling prices
and maintain internal controls over establishing and updating these estimates.
Our system sales arrangements generally include a five-year period of service. The first year of service is generally included in the system sale
arrangement for no additional consideration, and the remaining four years are billed separately at a stated service price. Revenue that is allocated to the
service obligation is deferred and recognized ratably over the service period.
Inventory valuation. Inventory is stated at the lower of cost or net realizable value on a first-in, first-out basis. The cost basis of our inventory is
reduced for any products that are considered excess or obsolete based on assumptions about future demand and market conditions. If actual future demand
or market conditions are less favorable than those projected by management, additional inventory write-downs may be required, which could have a
material adverse effect on the results of our operations.
Valuation of intangible assets and goodwill. We allocate the fair value of purchase consideration, including contingent consideration, to assets
acquired and liabilities assumed in a business combination based on their estimated fair values at the acquisition date. The excess of the fair value of the
purchase consideration over the fair value of assets acquired, liabilities assumed, and any noncontrolling interest is recorded as goodwill. When
determining the fair value of assets acquired, liabilities assumed, and any noncontrolling interest, management is required to make certain estimates and
assumptions, especially with respect to intangible assets. The estimates and assumptions used in valuing intangible assets include, but are not limited to, the
amount and timing of projected future cash flows, the discount rate used to determine the present value of these cash flows, and the determination of the
assets’ life cycle. These estimates are inherently uncertain and, therefore, actual results may differ from the estimates made.
Our intangible assets include identifiable intangible assets and goodwill. Identifiable intangible assets include in-process research and development,
developed technology, patents, distribution rights, customer relationships, licenses, and non-competition arrangements. Our identifiable intangible assets,
except for in-process research and development, have finite lives. Goodwill and intangible assets with indefinite lives are subject to an annual impairment
review (or more frequent if impairment indicators arise) by applying a fair value-based test. There have been no such impairments.
Identifiable intangible assets with finite lives are subject to impairment testing and are reviewed for impairment when events or circumstances indicate
that the carrying value of an asset is not recoverable and its carrying amount exceeds its fair value. We evaluate the recoverability of the carrying value of
these identifiable intangible assets based on estimated undiscounted cash flows to be generated from such assets. If the cash flow estimates or the
significant operating assumptions upon which they are based change in the future, we may be required to record additional impairment charges.
The valuation and classification of intangible assets and goodwill and the assignment of useful lives for purposes of amortization involves judgments
and the use of estimates. The evaluation of these intangible assets and goodwill for impairment under established accounting principles is required on a
recurring basis. Changes in business conditions could potentially require future adjustments to the assumptions made. When we determine that the useful
lives of assets are shorter than we had originally estimated, we accelerate the rate of amortization over the assets’ new, shorter useful lives. No significant
impairment charges or accelerated amortization were recorded in 2025, 2024, and 2023. A considerable amount of judgment is required in assessing
impairment, which includes financial forecasts. If conditions are different from management’s current estimates, material write-downs of long-lived assets
may be required, which would adversely affect our operating results.
Accounting for income taxes. Significant management judgment is required in determining our provision for income taxes, deferred tax assets and
liabilities, and any valuation allowance recorded against deferred tax assets in accordance with GAAP. Significant changes to these estimates may result in
an increase or decrease in our tax provision in the current period or subsequent periods.
We evaluate the likelihood of recovering our deferred tax assets and record a valuation allowance when it is more likely than not that some or all of
these assets will not be realized. The recoverability of deferred tax assets depends on our ability to generate sufficient taxable income in the jurisdictions
where those assets are recorded. In making this assessment, we consider forecasted taxable income, including income that may result from prudent and
feasible tax planning strategies, as well as the expected reversal of existing taxable temporary differences. These factors are reviewed regularly to
determine whether adjustments to the valuation allowance are necessary. If actual results differ from our forecasts or if tax laws change, our ability
84

-- 85 of 187 --

Table of Contents
to realize deferred tax assets could be affected, which may result in an increase or decrease in our income tax provision in future periods.
The calculation of our tax liabilities involves significant complexity due to the application of detailed tax rules across multiple jurisdictions. We
recognize liabilities for uncertain tax positions using a two-step approach. First, we determine whether it is more likely than not that a tax position will be
sustained upon examination, including any appeals or litigation, based on its technical merits. If this threshold is met, we then measure the benefit as the
largest amount that is more than 50% likely to be realized upon ultimate settlement. Estimating these amounts requires considerable judgment and is
inherently subjective, as it involves assessing the probability of various possible outcomes. We review and update our uncertain tax positions on a quarterly
basis, taking into account changes in facts and circumstances including, but not limited to, new tax laws, audit developments, and effective settlements.
Any adjustment in recognition or measurement may result in recording an additional tax provision or recognizing a tax benefit in the period of change.
Accounting for legal contingencies. From time to time, we are involved in a number of legal proceedings involving product liability, intellectual
property, shareholder derivative actions, securities class actions, employment, and other matters. We record a liability and related charge to earnings in our
Consolidated Financial Statements for legal contingencies when the loss is considered probable and the amount can be reasonably estimated. Our
assessment is re-evaluated each period and is based on all available information, including discussion with any outside legal counsel that represents us. If a
reasonable estimate of a known or probable loss cannot be made, but a range of probable losses can be estimated, the low-end of the range of losses is
recognized if no amount within the range is a better estimate than any other. If a material loss is reasonably possible, but not probable, and can be
reasonably estimated, the estimated loss or range of loss is disclosed in the Notes to the Consolidated Financial Statements.
When determining the estimated probable loss or range of losses, significant judgment is required to be exercised in order to estimate the amount and
timing of the loss to be recorded. Estimates of probable losses resulting from litigation are inherently difficult to make, particularly when the matters are in
early procedural stages with incomplete facts and information. The final outcome of legal proceedings is dependent on many variables and is difficult to
predict and, therefore, the ultimate cost to entirely resolve such matters may be materially different than the amount of current estimates. Consequently,
new information or changes in judgments and estimates could have a material adverse effect on our business, financial condition, and results of operations
or cash flows.
RECENT ACCOUNTING PRONOUNCEMENTS
See “Note 2. Summary of Significant Accounting Policies” of the Notes to Consolidated Financial Statements in “Item 8. Financial Statements and
Supplementary Data” for additional information regarding recent accounting pronouncements, including the respective expected dates of adoption and
estimated effects, if any, on our Consolidated Financial Statements.
85

-- 86 of 187 --

Table of Contents
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Interest Rate and Market Risk
The primary objective of our investment activities is to preserve principal while supporting our liquidity requirements. To achieve this objective, we
maintain a diversified portfolio of cash equivalents and short- and long-term investments in a variety of high-quality securities, including money market
funds, U.S. treasury and U.S. government agency securities, high-quality corporate notes and bonds, commercial paper, non-U.S. government agency
securities, and taxable and tax-exempt municipal notes. The securities are classified as available-for-sale and consequently are recorded at fair value with
unrealized gains or losses reported as a separate component of accumulated other comprehensive loss. The weighted average duration of our portfolio as of
December 31, 2025, was approximately 0.9 years. If interest rates rise, the market value of our investments may decline, which could result in a realized
loss if we are forced to sell an investment before its scheduled maturity. A hypothetical increase or decrease in interest rates by 25 basis points would have
resulted in a decrease or increase in the fair value of our net investment position of approximately $19 million, respectively, as of December 31, 2025. We
do not utilize derivative financial instruments to manage our interest rate risks.
Uncertain financial markets could result in a tightening in the credit markets, a reduced level of liquidity in many financial markets, and extreme
volatility in fixed income and credit markets. The credit ratings of the securities we have invested in could deteriorate and may have an adverse impact on
the carrying value of these investments.
Foreign Exchange Risk
The majority of our revenue, expense, and capital purchasing activities are transacted in U.S. dollars. However, we generally sell our products and
services in local currencies where we have direct distribution channels. We operate in a number of markets on a direct sales basis and incur operating
expenses in local currencies. We also purchase certain product components from non-U.S. suppliers in local currency. As a result, because a portion of our
operations consists of sales activities outside of the U.S., we have foreign exchange exposures to non-U.S. dollar revenues, operating expenses, accounts
receivable, accounts payable, and foreign currency bank balances.
For 2025, sales denominated in foreign currencies were approximately 24% of total revenue. The objective of our hedging program is to mitigate the
impact of changes in currency exchange rates on our net cash flow from foreign currency-denominated sales and expenses. For 2025, our revenue would
have decreased by approximately $140 million if the U.S. dollar exchange rate strengthened by 10% against the foreign-denominated foreign currencies in
which we sell. We also hedge the net recognized non-functional currency balance sheet exposures with foreign exchange forward contracts to reduce the
risk that our earnings and cash flows will be adversely affected by changes in exchange rates. A 10% strengthening of the U.S. dollar exchange rate against
all currencies to which we have exposure, after considering foreign currency hedges and offsetting positions as of December 31, 2025, would have resulted
in an approximately $2 million decrease in the carrying amounts of those net assets. Actual gains and losses in the future may differ materially from the
hypothetical gains and losses discussed above based on changes in the timing and amount of foreign currency exchange rate movements and our actual
exposure and hedging transactions. Bank counterparties to foreign exchange forward contracts expose us to credit-related losses in the event of their
nonperformance. To mitigate that risk, we only contract with counterparties that meet certain minimum requirements under our counterparty risk
assessment process. We monitor credit ratings and potential downgrades on at least a quarterly basis. Based on our ongoing assessment of counterparty
risk, we will adjust our exposure to various counterparties.
Although we sell to distributors outside of the U.S. in U.S. dollars, strengthening of the dollar can impact our distributors’ margins and could impact
the end customers’ ability to purchase our products if our distributors seek to recover the impact of the change in the dollar by increasing product and
service prices. Less than 10% of our revenue is conducted through distributors outside of the U.S. Strengthening of the dollar relative to non-U.S.
currencies could have an adverse impact on our business.
Our operations outside of the U.S. are subject to risks typical of operations outside of the U.S. including, but not limited to, differing economic
conditions, changes in the political climate, differing tax structures, other regulations and restrictions, and foreign exchange rate volatility.
86

-- 87 of 187 --

Table of Contents
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Index To Consolidated Financial Statements
Page No.
Report of Independent Registered Public Accounting Firm – 	PCAOB ID: 	238 	88
Consolidated Balance Sheets as of December 31, 2025, and 2024 	89
Consolidated Statements of Income for the years ended December 31, 2025, 2024, and 2023 	90
Consolidated Statements of Comprehensive Income for the years ended December 31, 2025, 2024, and 2023 	91
Consolidated Statements of Stockholders’ Equity for the years ended December 31, 2025, 2024, and 2023 	92
Consolidated Statements of Cash Flows for the years ended December 31, 2025, 2024, and 2023 	93
Notes to the Consolidated Financial Statements 	94
All schedules have been omitted, because they are not applicable or the required information is shown in the Consolidated Financial Statements or the
Notes thereto.
87

-- 88 of 187 --

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of Intuitive Surgical, Inc.
Opinions on the Financial Statements and Internal Control over Financial Reporting
We have audited the accompanying consolidated balance sheets of Intuitive Surgical, Inc. and its subsidiaries (the “Company”) as of December 31, 2025,
and 2024, and the related consolidated statements of income, of comprehensive income, of stockholders’ equity and of cash flows for each of the three
years in the period ended December 31, 2025, including the related notes (collectively referred to as the “consolidated financial statements”). We also have
audited the Company’s internal control over financial reporting as of December 31, 2025, based on criteria established in Internal Control - Integrated
Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of
December 31, 2025, and 2024, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2025 in
conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material
respects, effective internal control over financial reporting as of December 31, 2025, based on criteria established in Internal Control - Integrated
Framework (2013) issued by the COSO.
Basis for Opinions
The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting,
and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial
Reporting appearing under Item 9A. Our responsibility is to express opinions on the Company’s consolidated financial statements and on the Company’s
internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight
Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the
applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable
assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective
internal control over financial reporting was maintained in all material respects.
Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial
statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis,
evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used
and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal
control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness
exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing
such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
Definition and Limitations of Internal Control over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting
and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control
over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly
reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit
preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are
being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding
prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial
statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of
effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of
compliance with the policies or procedures may deteriorate.
Critical Audit Matters
The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was
communicated or required to be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to the consolidated
financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not
alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below,
providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
Determination of Standalone Selling Prices Related to System Sale Arrangements
As described in Notes 2 and 5 to the consolidated financial statements, the Company recognized $2,473.7 million of systems revenue during the year ended
December 31, 2025, of which a majority relates to system sale arrangements. The Company’s system sale arrangements include a combination of the
following performance obligations: system(s); system components; system accessories; instruments; accessories; and system service. For multiple-element
arrangements, revenue is allocated to each performance obligation based on its relative standalone selling price. Standalone selling prices are based on
observable prices at which the Company separately sells the products or services. If a standalone selling price is not directly observable, then management
estimates the standalone selling price considering market conditions and entity-specific factors including, but not limited to, historical pricing data, features
and functionality of the products and services, geographies, and type of customer.
The principal considerations for our determination that performing procedures relating to the determination of standalone selling prices related to system
sale arrangements is a critical audit matter are the significant judgment by management when determining estimates of standalone selling prices, which in
turn led to a high degree of auditor judgment, subjectivity, and effort in performing procedures and evaluating audit evidence relating to the estimates of
standalone selling prices used to allocate the transaction price of an arrangement to each distinct performance obligation.
Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated
financial statements. These procedures included testing the effectiveness of controls over the revenue recognition process, including controls over the

-- 89 of 187 --

determination of the estimates of standalone selling prices. These procedures also included, among others, (i) testing management’s process for determining
the estimates of standalone selling prices; (ii) evaluating the appropriateness of the overall methodology used by management to develop the estimates,
including the appropriateness of the data inputs related to the systems, geographies, and type of customer used in the methodology; (iii) testing the
completeness and accuracy of the data used in the methodology; and (iv) testing the accuracy of management’s calculations of estimated selling prices.
/s/ PricewaterhouseCoopers LLP
San Jose, California
February 3, 2026
We have served as the Company’s auditor since 2014.
88

-- 90 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
CONSOLIDATED BALANCE SHEETS
(IN MILLIONS, EXCEPT PAR VALUE AMOUNTS)
December 31,
2025 	2024
ASSETS
Current assets:
Cash and cash equivalents 	$ 	3,368.0 $ 	2,027.4
Short-term investments 	2,566.9 	1,985.9
Accounts receivable, net of allowances of $29.9 and $30.7 as of December 31, 2025, and 2024, respectively 	1,527.3 	1,225.4
Inventory 	1,840.0 	1,487.2
Prepaids and other current assets 	477.3 	385.1
Total current assets 	9,779.5 	7,111.0
Property, plant, and equipment, net 	5,342.4 	4,646.6
Long-term investments 	3,099.2 	4,819.1
Deferred tax assets 	1,018.6 	1,045.1
Intangible and other assets, net 	848.7 	773.9
Goodwill 	370.3 	347.5
Total assets 	$ 	20,458.7 $ 	18,743.2
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable 	$ 	255.1 $ 	193.4
Accrued compensation and employee benefits 	648.4 	535.6
Deferred revenue 	506.7 	468.8
Other accrued liabilities 	596.0 	547.5
Total current liabilities 	2,006.2 	1,745.3
Other long-term liabilities 	510.8 	468.3
Total liabilities 	2,517.0 	2,213.6
Commitments and contingencies (Note 8)
Stockholders’ equity:
Preferred stock, 2.5 shares authorized, $0.001 par value, issuable in series; zero shares issued and outstanding
as of December 31, 2025, and 2024 	— 	—
Common stock, 600.0 shares authorized, $0.001 par value, 355.1 shares and 356.6 shares issued and
outstanding as of December 31, 2025, and 2024, respectively 	0.4 	0.4
Additional paid-in capital 	10,768.5 	9,681.3
Retained earnings 	7,011.8 	6,803.3
Accumulated other comprehensive income (loss) 	43.3 	(51.3)
Total Intuitive Surgical, Inc. stockholders’ equity 	17,824.0 	16,433.7
Noncontrolling interest in joint venture 	117.7 	95.9
Total stockholders’ equity 	17,941.7 	16,529.6
Total liabilities and stockholders’ equity 	$ 	20,458.7 $ 	18,743.2
The accompanying notes are an integral part of these Consolidated Financial Statements.
89

-- 91 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
CONSOLIDATED STATEMENTS OF INCOME
(IN MILLIONS, EXCEPT PER SHARE AMOUNTS)
Year Ended December 31,
2025 	2024 	2023
Revenue:
Product 	$ 	8,492.6 $ 	7,045.0 $ 	5,956.3
Service 	1,572.1 	1,307.1 	1,167.8
Total revenue 	10,064.7 	8,352.1 	7,124.1
Cost of revenue:
Product 	2,866.1 	2,313.1 	2,041.8
Service 	556.3 	404.8 	352.8
Total cost of revenue 	3,422.4 	2,717.9 	2,394.6
Gross profit 	6,642.3 	5,634.2 	4,729.5
Operating expenses:
Selling, general and administrative 	2,385.0 	2,140.0 	1,963.9
Research and development 	1,311.8 	1,145.3 	998.8
Total operating expenses 	3,696.8 	3,285.3 	2,962.7
Income from operations 	2,945.5 	2,348.9 	1,766.8
Interest and other income, net 	365.9 	324.9 	192.1
Income before taxes 	3,311.4 	2,673.8 	1,958.9
Income tax expense 	434.8 	336.3 	141.6
Net income 	2,876.6 	2,337.5 	1,817.3
Less: net income attributable to noncontrolling interest in joint venture 	20.6 	14.9 	19.3
Net income attributable to Intuitive Surgical, Inc. 	$ 	2,856.0 $ 	2,322.6 $ 	1,798.0
Net income per share attributable to Intuitive Surgical, Inc.:
Basic 	$ 	8.00 $ 	6.54 $ 	5.12
Diluted 	$ 	7.87 $ 	6.42 $ 	5.03
Shares used in computing net income per share attributable to Intuitive Surgical, Inc.:
Basic 	356.9 	355.2 	351.2
Diluted 	362.7 	362.0 	357.4
The accompanying notes are an integral part of these Consolidated Financial Statements.
90

-- 92 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(IN MILLIONS)
Year Ended December 31,
2025 	2024 	2023
Net income 	$ 	2,876.6 $ 	2,337.5 $ 	1,817.3
Other comprehensive income (loss), net of tax:
Change in foreign currency translation gains (losses) 	63.8 	(53.2) 	25.7
Available-for-sale securities (net of tax):
Change in unrealized gains 	44.8 	15.0 	124.6
Less: Reclassification adjustment for (gains) losses on securities 	0.3 	0.1 	(0.1)
Net change 	45.1 	15.1 	124.5
Hedge instruments (net of tax):
Change in unrealized gains (losses) 	(6.7) 	5.7 	(6.6)
Less: Reclassification adjustment for (gains) losses on hedge instruments 	(0.3) 	7.8 	7.0
Net change 	(7.0) 	13.5 	0.4
Employee benefit plans (net of tax):
Change in unrealized losses 	(6.7) 	(14.9) 	(0.6)
Less: Reclassification adjustment for (gains) losses on employee benefit plans 	0.6 	(0.3) 	—
Net change 	(6.1) 	(15.2) 	(0.6)
Other comprehensive income (loss), net of tax 	95.8 	(39.8) 	150.0
Total comprehensive income 	2,972.4 	2,297.7 	1,967.3
Less: comprehensive income attributable to noncontrolling interest 	21.8 	14.2 	19.0
Total comprehensive income attributable to Intuitive Surgical, Inc. 	$ 	2,950.6 $ 	2,283.5 $ 	1,948.3
The accompanying notes are an integral part of these Consolidated Financial Statements.
91

-- 93 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
(IN MILLIONS)
Common Stock 	Additional
Paid-In
Capital Retained
Earnings
Accumulated
Other
Comprehensive
(Loss)/Income
Total Intuitive
Surgical, Inc.
Stockholders’
Equity
Noncontrolling
Interest
in
Joint
Venture
Total
Stockholders’
Equity	Shares 	Amount
Balances as of December 31, 2022 	350.0 $ 0.4 $ 7,703.9 $ 3,500.1 $ 	(162.5) $ 11,041.9 $ 	70.7 $ 11,112.6
Issuance of common stock through employee
stock plans 	4.7 	— 	296.3 	— 	— 	296.3 	— 	296.3
Shares withheld related to net share settlement
of equity awards 	(0.7) 	— 	(7.2) 	(157.5) 	— 	(164.7) 	— 	(164.7)
Share-based compensation expense related to
employee stock plans 	— 	— 	602.1 	— 	— 	602.1 	— 	602.1
Repurchase and retirement of common stock 	(1.7) 	— 	(18.7) 	(397.6) 	— 	(416.3) 	— 	(416.3)
Net income attributable to Intuitive Surgical,
Inc. 	— 	— 	— 	1,798.0 	— 	1,798.0 	— 	1,798.0
Other comprehensive income (loss) 	— 	— 	— 	— 	150.3 	150.3 	(0.3) 	150.0
Net income attributable to noncontrolling
interest in joint venture 	— 	— 	— 	— 	— 	— 	19.3 	19.3
Balances as of December 31, 2023 	352.3 $ 0.4 $ 8,576.4 $ 4,743.0 $ 	(12.2) $ 13,307.6 $ 	89.7 $ 13,397.3
Issuance of common stock through employee
stock plans 	5.0 	— 	429.4 	— 	— 	429.4 	— 	429.4
Shares withheld related to net share settlement
of equity awards 	(0.7) 	— 	(7.7) 	(262.3) 	— 	(270.0) 	— 	(270.0)
Share-based compensation expense related to
employee stock plans 	— 	— 	683.2 	— 	— 	683.2 	— 	683.2
Cash dividends declared and paid by joint
venture 	— 	— 	— 	— 	— 	— 	(8.0) 	(8.0)
Net income attributable to Intuitive Surgical,
Inc. 	— 	— 	— 	2,322.6 	— 	2,322.6 	— 	2,322.6
Other comprehensive income (loss) 	— 	— 	— 	— 	(39.1) 	(39.1) 	(0.7) 	(39.8)
Net income attributable to noncontrolling
interest in joint venture 	— 	— 	— 	— 	— 	— 	14.9 	14.9
Balances as of December 31, 2024 	356.6 $ 0.4 $ 9,681.3 $ 6,803.3 $ 	(51.3) $ 16,433.7 $ 	95.9 $ 16,529.6
Issuance of common stock 	— 	— 	12.3 	— 	— 	12.3 	— 	12.3
Issuance of common stock through employee
stock plans 	4.0 	— 	350.3 	— 	— 	350.3 	— 	350.3
Shares withheld related to net share settlement
of equity awards 	(0.7) 	— 	(9.1) 	(410.0) 	— 	(419.1) 	— 	(419.1)
Share-based compensation expense related to
employee stock plans 	— 	— 	797.1 	— 	— 	797.1 	— 	797.1
Repurchase and retirement of common stock 	(4.8) 	— 	(63.4) 	(2,237.5) 	— 	(2,300.9) 	— 	(2,300.9)
Net income attributable to Intuitive Surgical,
Inc. 	— 	— 	— 	2,856.0 	— 	2,856.0 	— 	2,856.0
Other comprehensive income (loss) 	— 	— 	— 	— 	94.6 	94.6 	1.2 	95.8
Cash dividends declared and paid by joint
venture 	— 	— 	— 	— 	— 	— 	— 	—
Net income attributable to noncontrolling
interest in joint venture 	— 	— 	— 	— 	— 	— 	20.6 	20.6
Balances as of December 31, 2025 	355.1 $ 0.4 $ 10,768.5 $ 7,011.8 $ 	43.3 $ 17,824.0 $ 	117.7 $ 17,941.7
The accompanying notes are an integral part of these Consolidated Financial Statements.
92

-- 94 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(IN MILLIONS)
Year Ended December 31,
2025 	2024 	2023
Operating activities:
Net income 	$ 	2,876.6 $ 	2,337.5 $ 	1,817.3
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and loss on disposal of property, plant, and equipment, net 	614.7 	445.3 	401.6
Amortization of intangible and other assets 	62.4 	54.4 	53.2
Gain on sale of business 	(1.0) 	(1.1) 	—
(Gain) loss on investments and (accretion) amortization of investment discounts and
premiums, net 	(57.2) 	(43.3) 	7.3
Deferred income taxes 	19.1 	(135.3) 	(280.8)
Share-based compensation expense 	788.2 	676.8 	592.8
Changes in operating assets and liabilities, net of effects of acquisitions:
Accounts receivable 	(301.7) 	(95.9) 	(186.3)
Inventory 	(1,063.4) 	(830.0) 	(712.5)
Prepaids and other assets 	(187.1) 	(231.8) 	24.2
Accounts payable 	57.9 	(0.4) 	41.7
Accrued compensation and employee benefits 	112.7 	99.3 	34.8
Deferred revenue 	75.2 	31.2 	53.4
Other liabilities 	34.1 	108.3 	(32.9)
Net cash provided by operating activities 	3,030.5 	2,415.0 	1,813.8
Investing activities:
Purchases of investments 	(1,215.9) 	(5,139.6) 	(2,207.4)
Proceeds from sales of investments 	259.9 	100.2 	230.3
Proceeds from maturities of investments 	2,175.5 	2,878.8 	2,690.1
Purchases of property, plant, and equipment 	(539.8) 	(1,111.2) 	(1,064.2)
Acquisition of businesses, net of cash, and intellectual property and other investing activities 	(13.9) 	(1.0) 	(8.9)
Net cash provided by (used in) investing activities 	665.8 	(3,272.8) 	(360.1)
Financing activities:
Proceeds from issuance of common stock relating to employee stock plans 	350.3 	429.4 	296.3
Taxes paid related to net share settlement of equity awards 	(419.1) 	(270.0) 	(164.7)
Repurchases of common stock 	(2,295.3) 	— 	(416.3)
Cash dividends paid by joint venture to noncontrolling interest 	— 	(8.0) 	—
Payment of deferred purchase consideration 	— 	(0.5) 	(2.9)
Net cash provided by (used in) financing activities 	(2,364.1) 	150.9 	(287.6)
Effect of exchange rate changes on cash, cash equivalents, and restricted cash 	12.8 	(0.8) 	3.3
Net increase (decrease) in cash, cash equivalents, and restricted cash 	1,345.0 	(707.7) 	1,169.4
Cash, cash equivalents, and restricted cash, beginning of year 	2,062.4 	2,770.1 	1,600.7
Cash, cash equivalents, and restricted cash, end of year 	$ 	3,407.4 $ 	2,062.4 $ 	2,770.1
The accompanying notes are an integral part of these Consolidated Financial Statements.
93

-- 95 of 187 --

Table of Contents
INTUITIVE SURGICAL, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
In this report, “Intuitive,” the “Company,” “we,” “us,” and “our” refer to Intuitive Surgical, Inc. and its wholly and majority-owned subsidiaries.
NOTE 1. DESCRIPTION OF THE BUSINESS
Intuitive develops, manufactures, and markets da Vinci surgical systems and the Ion endoluminal system. The Company’s products and related services
enable physicians and healthcare providers to improve the quality of and access to minimally invasive care. The da Vinci surgical system is designed to
enable surgeons to perform a wide range of surgical procedures within our targeted general surgery, urologic, gynecologic, cardiothoracic, and head and
neck specialties and consists of a surgeon console or consoles, a patient-side cart, and a high-performance vision system. The Ion endoluminal system is a
flexible, robotic-assisted, catheter-based platform for which the first cleared indication is minimally invasive biopsies in the lung and consists of a system
cart, a controller, a catheter, and a vision probe. Both systems use software, instruments, and accessories.
NOTE 2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Basis of Presentation
The accompanying Consolidated Financial Statements and accompanying notes have been prepared in accordance with accounting principles generally
accepted in the United States of America (“GAAP”) and include the accounts of the Company and its wholly and majority-owned subsidiaries. All
intercompany balances and transactions have been eliminated in consolidation.
The Consolidated Financial Statements include the results and balances of the Company’s majority-owned joint ventures, Intuitive Surgical-Fosun
Medical Technology (Shanghai) Co., Ltd. and Intuitive Surgical-Fosun (HongKong) Co., Ltd. (collectively, the “Joint Venture”) with Shanghai Fosun
Pharmaceutical (Group) Co., Ltd. (“Fosun Pharma”). The Company holds a controlling financial interest in the Joint Venture, and the noncontrolling
interest is reflected as a separate component of the consolidated stockholders’ equity. The noncontrolling interest’s share of the earnings in the Joint
Venture is presented separately in the Consolidated Statements of Income and Comprehensive Income for the years ended December 31, 2025, 2024, and
2023.
Use of Estimates
The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts
reported in the Consolidated Financial Statements and accompanying Notes to the Consolidated Financial Statements. The accounting estimates that
require management’s most significant, complex, and subjective judgments include the standalone selling prices used to allocate the contract consideration
to the individual performance obligations, the valuation of inventory, the valuation of and assessment of the recoverability of intangible assets and
goodwill, the recognition and measurement of current and deferred income taxes, including the measurement of uncertain tax positions, and the estimates
for legal contingencies. Actual results could differ materially from these estimates.
Concentrations of Credit Risk and Other Risks and Uncertainties
The carrying amounts for financial instruments consisting of cash and cash equivalents, accounts receivable, accounts payable, and accrued liabilities
approximate fair value due to their short maturities. Marketable securities and derivative instruments are stated at their estimated fair values, based on
quoted market prices for the same or similar instruments. The counterparties to the agreements relating to the Company’s investment securities and
derivative instruments consist of various major corporations, financial institutions, and government agencies of high credit standing.
The Company’s accounts receivable are primarily derived from billings related to revenue arrangements with customers and distributors located
throughout the world. The Company performs credit evaluations of its customers’ financial condition and, generally, requires no collateral from its
customers. The Company provides reserves for potential credit losses but has not experienced significant losses to date. As of December 31, 2025, and
2024, 65% and 66%, respectively, of accounts receivable were from domestic customers.
During the years ended December 31, 2025, 2024, and 2023, domestic revenue accounted for 68%, 67%, and 66% of total revenue, respectively, while
outside of the U.S. (“OUS”) revenue accounted for 32%, 33%, and 34% of total revenue, respectively, for each of the years then ended.
The Company’s future results of operations and liquidity could be materially adversely affected by uncertainties surrounding macroeconomic and
geopolitical factors in both the U.S. and globally. These uncertainties include any introduction or modification of tariffs or trade barriers, inflationary
pressures, elevated interest rates, disruptions in commodity markets stemming from conflicts, such as those between Russia and Ukraine and conflicts in
the Middle East, and supply chain challenges.
94

-- 96 of 187 --

Table of Contents
Recent tariff changes imposed by the U.S. and other countries have created increased risks and uncertainties surrounding the Company’s future results
of operations. The U.S. import tariffs, along with any reciprocal measures by other countries, are expected to continue to increase the Company’s cost of
raw materials and finished goods imported from outside of the U.S. Additionally, the Company anticipates that some of its suppliers will incur incremental
tariff-related costs, which may be passed on to the Company. The ultimate impact of changes to tariffs or trade barriers will depend on various factors,
including the timing, amount, scope, and nature of any tariffs or trade barriers that are implemented.
Cash, Cash Equivalents, and Restricted Cash
The Company considers all highly liquid investments with a final maturity from the date of purchase of 90 days or less to be cash equivalents.
Amounts included in restricted cash primarily relate to the Company’s insurance programs and certain employee-related benefits.
Investments
Available-for-sale debt securities. The Company’s investments may consist of money market funds, U.S. treasury and U.S. government agency
securities, high-quality corporate notes and bonds, commercial paper, non-U.S. government agency securities, and taxable and tax-exempt municipal notes.
The Company has designated all investments as available-for-sale and, therefore, the investments are subject to periodic impairment under the available-
for-sale debt security impairment model. Available-for-sale debt securities in an unrealized loss position are written down to fair value through a charge to
interest and other income, net, if the Company intends to sell the security or it is more likely than not the Company will be required to sell the security
before recovery of its amortized cost basis. The Company evaluates the remaining securities to determine what amount of the excess, if any, is caused by
expected credit losses. A decline in fair value attributable to expected credit losses is recorded to interest and other income, net, while any portion of the
loss related to non-credit factors is recorded in accumulated other comprehensive income (loss). For securities sold prior to maturity, the cost of the
securities sold is based on the specific identification method. Realized gains and losses on the sale of investments are recorded in interest and other income,
net in the Consolidated Statements of Income. Investments with remaining maturities at the date of purchase greater than 90 days and remaining maturities
as of the reporting period of less than one year are classified as short-term investments. Investments with remaining maturities greater than one year are
classified as long-term investments.
Equity investments. From time to time, the Company holds equity investments with readily determinable fair values and equity investments without
readily determinable fair values. The Company recognizes equity investments with readily determinable fair values at the quoted market price with changes
in value recorded in interest and other income, net. The Company generally recognizes equity investments that do not have readily determinable fair values
at cost minus impairment, if any, plus or minus changes resulting from observable price changes in orderly transactions for the identical or a similar
investment of the same issuer with changes in value recorded in interest and other income, net.
Fair Value Measurements
The Company measures the fair value of money market funds, U.S. treasury securities, and equity investments with readily determinable value based
on quoted prices in active markets for identical assets as Level 1 securities. Marketable securities measured at fair value using Level 2 inputs are, or have
been, primarily comprised of commercial paper, corporate notes and bonds, U.S. and non-U.S. government agencies, and municipal notes. The Company
reviews trading activity and pricing for these investments as of the measurement date. When sufficient quoted pricing for identical securities is not
available, the Company uses market pricing and other observable market inputs for similar securities obtained from various third-party data providers.
These inputs either represent quoted prices for similar assets in active markets or have been derived from observable market data. This approach results in
the Level 2 classification of these securities within the fair value hierarchy.
Inventory
Inventory is stated at the lower of cost or net realizable value on a first-in, first-out basis. Inventory costs include direct materials, direct labor, and
normal manufacturing overhead. The cost basis of the Company’s inventory is reduced for any products that are considered excessive or obsolete based
upon assumptions about future demand and market conditions. Additionally, the cost basis of the Company’s inventory does not include any unallocated
fixed overhead costs associated with abnormally low utilization of its factories.
Property, Plant, and Equipment
Property, plant, and equipment are stated at cost, net of accumulated depreciation. Depreciation is computed on a straight-line basis over the estimated
useful lives of the assets, down to the estimated salvage value, if any. The salvage value of operating lease assets is estimated based on a number of factors
including, but not limited to, the lease term, technological obsolescence, and the expected future demand for refurbished systems.
95

-- 97 of 187 --

Table of Contents
Depreciation is recognized over the following estimated useful lives:
Useful Lives
Building 	Up to 30 years
Building improvements 	Up to 15 years
Leasehold improvements 	Up to 15 years
Equipment and furniture 	5 years
Operating lease assets 	1 to 7 years
Computer and office equipment 	3 to 5 years
Enterprise-wide software 	5 to 8 years
Purchased software 	Lesser of 3 years or life of license
Depreciation expense for the years ended December 31, 2025, 2024, and 2023, was $600 million, $439 million, and $382 million, respectively.
Capitalized Software Costs for Internal Use
The Company capitalizes direct costs associated with developing or obtaining internal use software, including enterprise-wide business software,
which are incurred during the application development stage. These capitalized costs are recorded as capitalized software within property, plant, and
equipment. Costs related to preliminary project activities and post-implementation activities are expensed as incurred. Once the software is ready for its
intended use, amounts capitalized are amortized over an estimated useful life of up to 8 years on a straight-line basis.
Implementation Costs in a Cloud Computing Arrangement
The Company capitalizes qualified implementation costs incurred in a hosting arrangement that is a service contract for which it is the customer in
accordance with the requirements for capitalizing costs incurred to develop internal-use software. These capitalized implementation costs are recorded
within intangible and other assets, net, and are generally amortized over the fixed, non-cancellable term of the associated hosting arrangement on a straight-
line basis. The following table summarizes implementation costs in cloud computing arrangements as of the periods presented (in millions):
December 31,
2025 	2024
Capitalized implementation costs 	$ 	91.9 $ 	67.6
Less: Accumulated amortization 	(42.3) 	(31.1)
Total capitalized implementation costs in intangible and other assets, net 	$ 	49.6 $ 	36.5
During the years ended December 31, 2025, 2024, and 2023, the Company recognized $11.9 million, $10.8 million, and $10.2 million of amortization
expense associated with capitalized implementation costs, respectively.
Business Combinations
The Company accounts for business acquisitions in accordance with ASC 805, Business Combinations. This standard requires the acquiring entity in a
business combination to recognize the assets acquired, liabilities assumed, and any noncontrolling interest in the acquiree using acquisition-date fair values.
Certain provisions of this standard prescribe, among other things, the determination of acquisition-date fair value of consideration paid in a business
combination, including contingent consideration. The excess of the acquisition-date fair value of consideration paid over the fair values of the identifiable
assets and liabilities is recorded as goodwill. Acquisition-related costs are recognized separately from the business combination and are expensed as
incurred. The Company includes the results of operations of the businesses that are acquired as of the acquisition date.
Goodwill and Intangible Assets
Goodwill and intangible assets with indefinite useful lives are not amortized but are tested for impairment at least annually during the fourth quarter, or
if circumstances indicate their value may no longer be recoverable. Goodwill represents the excess of the purchase price over the fair value of net
identifiable assets and liabilities. The Company continues to operate in one segment, which is considered to be the sole reporting unit and, therefore,
goodwill was tested for impairment at the enterprise level.
Intangible assets are carried at cost, net of accumulated amortization. Amortization is recorded on a straight-line basis over the intangible assets’ useful
lives, which range from approximately 1 to 8 years.
96

-- 98 of 187 --

Table of Contents
Impairment of Long-lived Assets
The Company evaluates long-lived assets, which include finite-lived intangible and tangible assets, for impairment whenever events or changes in
circumstances indicate that the carrying value of long-lived assets may not be recoverable. Recoverability is measured by comparing the net book value to
the future undiscounted cash flows attributable to such assets. The Company recognizes an impairment charge equal to the amount by which the net book
value exceeds its fair value. No material impairment losses were incurred in the periods presented.
Revenue Recognition
The Company’s revenue consists of product revenue, resulting from the sale of systems, system components, and instruments and accessories, and
service revenue. The Company accounts for a contract with a customer when there is a legally enforceable contract between the Company and its customer,
the rights of the parties are identified, the contract has commercial substance, and the collectability of the contract consideration is probable. The
Company’s revenues are measured based on the consideration specified in the contract with each customer, net of any sales incentives and taxes collected
from customers that are remitted to government authorities.
The Company’s system sale arrangements generally contain multiple products and services. For these bundled sale arrangements, the Company
accounts for individual products and services as separate performance obligations if they are a distinct product or service that is separately identifiable from
other items in bundled packages and if a customer can benefit from the product or service on its own or with other resources that are readily available to the
customer. The Company’s system sale arrangements include a combination of the following performance obligations: system(s); system components;
system accessories; instruments; accessories; and system service. The Company’s system sale arrangements generally include a five-year period of service.
The first year of service is generally included in the system sale arrangement for no additional consideration, and the remaining four years of service are
priced separately. The Company considers the service terms in the arrangements that are legally enforceable to be performance obligations. Other than
service, the Company generally satisfies all of the performance obligations at a point in time. System components, system accessories, instruments,
accessories, and service are also sold on a stand-alone basis.
For multiple-element arrangements, revenue is allocated to each performance obligation based on its relative standalone selling price. Standalone
selling prices are based on observable prices at which the Company separately sells the products or services. If a standalone selling price is not directly
observable, the Company estimates the standalone selling price considering market conditions and entity-specific factors including, but not limited to,
historical pricing data, features and functionality of the products and services, geographies, and type of customer. The Company regularly reviews
standalone selling prices and updates these estimates, as necessary.
The Company recognizes revenue as the performance obligations are satisfied by transferring control of the product or service to a customer. The
Company generally recognizes revenue for the performance obligations in the following manner:
System sales. For systems (including system components and system accessories) sold directly to end customers, revenue is recognized when the
Company transfers control to the customer, which is generally at the point when acceptance occurs that indicates customer acknowledgment of
delivery or installation, depending on the terms of the arrangement. For systems sold through distributors, revenue is recognized generally at the time
of shipment. The Company’s system arrangements generally do not provide a right of return. The systems are generally covered by a one-year
warranty, which is accounted for as a single performance obligation with the first year of service.
Instruments and accessories. Revenue from sales of instruments and accessories is recognized when control is transferred to the customers, which
generally occurs at the time of shipment but could also occur at the time of delivery, depending on the customer arrangement. The Company generally
allows its customers to return unused products for a limited period of time subsequent to the initial purchase in the normal course of business and
records an allowance against revenue for estimated returns.
Service. Service revenue is recognized over the term of the service period, as the customer benefits from the services throughout the service
period. Revenue related to services performed on a time-and-materials basis is recognized when performed.
Transactions involving system trade-ins
Customers can negotiate to trade in their older systems for a credit towards the purchase of a newer generation system. Such trade-in transactions are
generally not based on any pre-existing rights granted by the Company and are generally negotiated separately based on the circumstances at the time of the
trade-in and based on the then-fair value of the underlying system. Accordingly, such trade-ins are generally not considered separate performance
obligations.
When a specified-price trade-in right is granted at the time of a system purchase, it generally provides for a trade-in credit that requires the customer to
enter into a new purchase agreement to exercise that right. The Company accounts for such rights
97

-- 99 of 187 --

Table of Contents
as a guarantee and reduces the total consideration by the fair value of that guarantee. The remaining consideration is allocated to each performance
obligation based on their relative fair value. As of December 31, 2025, and 2024, the liability recognized for these guarantees was not material.
Traded-in systems can generally be reconditioned and resold. The Company accounts for the fair value of the traded-in system as additional
consideration. When there is no market for the traded-in system, no value is assigned. The value of the traded-in system is reported as a component of
inventory until resold.
Purchases of system components
Customers have the opportunity to add additional features to their systems at a price that is separately negotiated, for example, by adding a second
surgeon console for use with the da Vinci surgical system. Revenue is recognized when the component level features have been provided and all revenue
recognition criteria are met.
Assets Recognized from the Cost to Obtain a Contract with a Customer
The Company has determined that certain sales incentives provided to the Company’s sales team are required to be capitalized when the Company
expects to generate future economic benefits from the related revenue-generating contracts subsequent to the initial sales transaction. Capitalized contract
acquisition costs are recorded within intangible and other assets, net and are amortized on a systematic basis based on the timing of when the Company
expects to earn the related revenue. The sales incentives allocated to system sales and sales-type leases are expensed upon the transfer of control of the
systems, and the amounts allocated to service and system operating leases are amortized over their economic life on a straight-line basis. When determining
the economic life of the contract acquisition assets recognized, the Company considers historical contract renewal rates, expectations of future contract
renewals, and other factors that could impact the economic benefits that the Company expects to generate from that arrangement. The amounts capitalized
as contract acquisition costs were $130 million and $111 million as of December 31, 2025, and 2024, respectively.
During the years ended December 31, 2025, 2024, and 2023, the Company recognized $38.0 million, $37.7 million, and $33.0 million of amortization
expense associated with contract acquisition assets, respectively. The Company did not incur any impairment losses during the periods presented.
Intuitive System Leasing
The Company enters into lease arrangements with certain qualified customers. Leases have terms that generally range from 12 to 84 months and are
usually collateralized by a security interest in the underlying assets. The Company also leases systems to certain qualified customers under usage-based
arrangements that have terms of up to 84 months. For these usage-based lease arrangements, the lease fee is generally billed monthly in arrears based on a
contractual per-use fee where usage is generally defined as the number of procedures performed with the system.
Revenue related to multiple-element arrangements are allocated to lease and non-lease elements based on their relative standalone selling prices as
prescribed by the Company’s revenue recognition policy. Lease elements generally include a system or system component, while non-lease elements
generally include service. For some lease arrangements, customers are provided with the right to purchase the leased system at some point during and/or at
the end of the lease term. Except for usage-based lease arrangements, lease arrangements generally do not provide rights for the customers to exit or
terminate the lease without incurring a penalty. Certain lease arrangements may also include upgrade rights that allow customers to upgrade the leased
system to newer technology at some point during the lease term. Generally, these upgrade rights do not specify the terms, including the price or structure of
the future upgrade transactions and are subject to negotiation and mutual agreement of terms based on the circumstances at the time of the upgrade,
including the then-fair value of the system as well as other factors. System upgrade transactions generally will result in a modification of the existing lease.
The Company accounts for lease modifications at the time a new or amended contract is executed.
In determining whether a transaction should be classified as a sales-type or operating lease (whether fixed-payment or usage-based), the Company
considers the following terms at lease commencement: (1) whether title of the system transfers automatically or for a nominal fee by the end of the lease
term; (2) whether the present value of the minimum lease payments equals or exceeds substantially all of the fair value of the leased system; (3) whether
the lease term is for the major part of the remaining economic life of the leased system; and (4) whether the lease grants the lessee an option to purchase the
leased system that the lessee is reasonably certain to exercise.
The Company generally recognizes revenue from sales-type lease arrangements at the time the system is accepted by the customer, assuming all other
revenue recognition criteria have been met. Revenue related to lease elements from sales-type leases is presented as product revenue. Revenue related to
lease elements from fixed-payment operating lease arrangements is generally recognized on a straight-line basis over the lease term and is presented as
product revenue. Revenue related to lease elements from usage-based arrangements is recognized as the customers utilize the systems and is presented as
product revenue.
98

-- 100 of 187 --

Table of Contents
We generally require customers to pay for the property taxes that are due on leased systems. The amounts invoiced to customers for property taxes are
considered variable lease payments and are included in product revenue. Amounts related to property taxes were not material in any of the periods
presented.
Other Leasing Arrangements
The Company determines if an arrangement contains a lease at inception. For arrangements where the Company is the lessee, operating leases are
included in intangible and other assets, net, other accrued liabilities, and other long-term liabilities on the Consolidated Balance Sheet. The Company
currently does not have any finance leases.
Operating lease right-of-use (“ROU”) assets and operating lease liabilities are recognized based on the present value of the future minimum lease
payments over the lease term at the commencement date. ROU assets also include any initial direct costs incurred and any lease payments made at or
before the lease commencement date, less lease incentives received. The Company uses its incremental borrowing rate based on the information available
at the commencement date in determining the lease liabilities, as the Company does not have insight into the inputs necessary to calculate the implicit rate
of the leases. Lease terms may include options to extend or terminate when the Company is reasonably certain the option will be exercised. Lease expense
is recognized on a straight-line basis over the lease term.
The Company also has lease arrangements with lease and non-lease components. The Company elected the practical expedient not to separate non-
lease components from lease components for the Company’s real estate and automobile leases. Additionally, the Company applied a portfolio approach to
effectively account for the operating lease ROU assets and lease liabilities for the Company’s automobile leases. The Company also elected to apply the
short-term lease measurement and recognition exemption in which ROU assets and lease liabilities are not recognized for leases with terms of 12 months or
less.
Credit Losses
Trade accounts receivable. The allowance for doubtful accounts is based on the Company’s assessment of the collectibility of customer accounts. The
Company regularly reviews the allowance by considering factors such as historical experience, credit quality, age of the accounts receivable balances, and
current economic conditions that may affect a customer’s ability to pay. For the years ended December 31, 2025, and 2024, bad debt expense was not
material.
Net investment in sales-type leases. The Company enters into sales-type leases with certain qualified customers to purchase its systems. Sales-type
leases have terms that generally range from 24 to 84 months and are usually collateralized by a security interest in the underlying assets. The allowance for
loan loss is based on the Company’s assessment of the current expected lifetime loss on lease receivables. The Company regularly reviews the allowance
by considering factors such as historical experience, credit quality, age of the lease receivable balances, and current economic conditions that may affect a
customer’s ability to pay. Lease receivables are considered past due 90 days after the due date of the invoice.
The Company manages the credit risk of the net investment in sales-type leases using a number of factors relating to our customers, including, but not
limited to, the following: size of operations; profitability, liquidity, and debt ratios; payment history; and past due amounts. The Company also uses credit
scores obtained from external providers as a key indicator for the purposes of determining credit quality. The following table summarizes the amortized
cost basis by year of origination and by credit quality for the net investment in sales-type leases as of December 31, 2025 (in millions):
2025 	2024 	2023 	2022 	2021 	Prior 	Net Investment
Credit Rating:
High 	$ 	48.3 $ 	52.3 $ 	22.6 $ 	23.5 $ 	12.0 $ 	0.8 $ 	159.5
Moderate 	20.6 	62.8 	13.7 	25.6 	11.2 	2.0 	135.9
Low 	0.1 	4.9 	0.8 	1.3 	0.3 	— 	7.4
Total 	$ 	69.0 $ 	120.0 $ 	37.1 $ 	50.4 $ 	23.5 $ 	2.8 $ 	302.8
For the year ended December 31, 2025, and 2024, credit losses related to the net investment in sales-type leases were not material.
The Company’s exposure to credit losses may increase if its customers are adversely affected by changes in healthcare laws, procedure coverage, and
reimbursement, economic pressures or uncertainty associated with local or global economic recessions, or other customer-specific factors. Although the
Company has historically not experienced significant credit losses, it is possible that there could be a material adverse impact from potential adjustments of
the carrying amount of trade and lease receivables as hospital cash flows are impacted by macroeconomic factors, including inflation, high interest rates,
and staffing constraints.
99

-- 101 of 187 --

Table of Contents
Available-for-sale debt securities. The Company regularly reviews the securities in an unrealized loss position and evaluates the current expected
credit loss by considering factors such as historical experience, market data, financial condition and near-term prospects of the investee, the extent of the
loss related to the credit of the issuer, and the expected cash flows from the security. The Company segments its portfolio based on the underlying risk
profiles of the securities and has a zero-loss expectation for U.S. treasury and U.S. government agency securities. The basis for this assumption is that these
securities have consistently high credit ratings by rating agencies, have a long history with no credit losses, are explicitly guaranteed by a sovereign entity,
which can print its own currency, and are denominated in a currency that is routinely held by central banks, used in international commerce, and commonly
viewed as a reserve currency. Additionally, all of the Company’s investments in corporate debt securities are in securities with high-quality credit ratings,
which have historically experienced low rates of default. For the years ended December 31, 2025, and 2024, credit losses related to available-for-sale debt
securities were not material.
Allowance for Sales Returns
The allowance for sales returns is based on the Company’s estimates of potential future returns of certain products related to current period product
revenue. The Company analyzes historical returns, current economic trends, and changes in customer demand and acceptance of the Company’s products.
Share-Based Compensation
The Company grants long-term equity awards under its stock-based compensation plans to certain employees and non-employee directors of the
Company. These awards include restricted stock units, stock options, and performance stock units. The Company’s share-based compensation cost is
measured at the grant date, based on the fair value of the award, and is recognized as expense on a straight-line basis over the requisite service period. The
Company estimates expected forfeitures at the time of grant and revises the estimate, if necessary, in subsequent periods if actual forfeitures differ from
those estimated.
Restricted stock units. The fair value of restricted stock units (“RSUs”) is determined based on the closing quoted price of the Company’s common
stock on the date of the grant.
Stock options. The Black-Scholes-Merton option-pricing model is used to estimate the fair value of stock options granted and utilizes the following
inputs: (1) closing quoted price of the Company’s common stock on the date of grant; (2) expected term; (3) expected volatility; and (4) risk-free interest
rate.
Expected Term: The expected term represents the weighted-average period that the stock options are expected to be outstanding prior to being
exercised. The Company determines expected term based on historical exercise patterns and its expectation of the time that it will take for
employees to exercise options still outstanding.
Expected Volatility: The Company uses market-based implied volatility for purposes of valuing stock options granted. Market-based implied
volatility is derived based on actively traded options with expirations greater than one year on the Company’s common stock. The extent to
which the Company relies on market-based volatility when valuing options depends, among other things, on the availability of traded options on
the Company’s stock and the term of such options. Due to a sufficient volume of traded options, the Company used 100% market-based implied
volatility to value options granted, which the Company believes is more representative of future stock price trends than historical volatility.
Risk-Free Interest Rate: The risk-free interest rate is based on the U.S. treasury yield curve in effect at the time of grant for the expected term of
the stock option.
Performance stock units. Performance stock units (“PSUs”) include predefined performance and market conditions. The fair value of performance
stock units with performance conditions is based on the closing quoted price of the Company’s common stock on the date of the grant. The Company
estimates the number of awards with performance conditions that will ultimately vest based on the probability of achievement each quarter to determine the
amount of compensation expense to recognize each reporting period. The fair value of performance stock units that include a market condition is
determined using a Monte Carlo simulation model.
Employee stock purchase plan. The fair value of shares to be issued under the Company’s Employee Stock Purchase Plan (the “ESPP”) is computed
using the Black-Scholes-Merton option-pricing model at the commencement of an offering period in February and August of each year utilizing the
following inputs: (1) closing quoted price of the Company’s common stock on the initial date of the offering period; (2) expected term; (3) expected
volatility; and (4) risk-free interest rate. Share-based compensation for the ESPP is recognized as expense on a straight-line basis over the two-year offering
period.
See “Note 10. Share-Based Compensation” for a detailed discussion of the Company’s stock plans and share-based compensation expense.
100

-- 102 of 187 --

Table of Contents
Computation of Net Income per Share
Basic net income per share attributable to Intuitive Surgical, Inc. is computed using the weighted-average number of shares outstanding during the
period. Diluted net income per share attributable to Intuitive Surgical, Inc. is computed using the weighted-average number of the Company’s shares and
dilutive potential shares outstanding during the period. Dilutive potential shares primarily consist of RSUs, stock options, PSUs, and shares to be purchased
by employees under the ESPP.
Employee equity share options, non-vested shares, and similar equity instruments granted by the Company are treated as potential common shares
outstanding in computing diluted earnings per share. Diluted shares outstanding include the dilutive effect of equity awards, which is calculated based on
the average share price for each fiscal period using the treasury stock method. Under the treasury stock method, the amount the employee must pay for
exercising stock options and the amount of compensation cost for future service that the Company has not yet recognized are assumed to be used to
repurchase shares.
Research and Development Expenses
Research and development costs are expensed as incurred and include amortization of intangible assets, costs associated with co-development research
and development licensing arrangements, costs of prototypes, salaries, benefits and other headcount-related costs, contract and other outside service fees,
and facilities and overhead costs.
Foreign Currency and Other Hedging Instruments
For subsidiaries whose local currency is their functional currency, their assets and liabilities are translated into U.S. dollars at exchange rates at the
balance sheet date, and revenues and expenses are translated using exchange rates in effect during the period. Gains and losses from foreign currency
translation are included in accumulated other comprehensive income (loss) within stockholders’ equity in the Consolidated Balance Sheets. For all non-
functional currency monetary account balances, the re-measurement of such balances to the functional currency results in either a foreign exchange gain or
loss, which is recorded to interest and other income, net in the Consolidated Statements of Income in the same accounting period that the re-measurement
occurred.
The Company uses derivatives to partially offset its business exposure to foreign currency exchange risk. The terms of the Company’s derivative
contracts are generally thirteen months or shorter. The Company typically hedges portions of its forecasted foreign currency exposure associated with
revenue and expenses. The Company may also enter into foreign currency forward contracts to offset the foreign currency exchange gains and losses
generated by the re-measurement of certain assets and liabilities denominated in non-functional currencies. The hedging program is not designated for
trading or speculative purposes.
The Company’s accounting policies for these instruments are based on whether the instruments are designated as hedging or non-hedging instruments.
The Company records all derivatives on the Consolidated Balance Sheets at fair value. The effective portions of cash flow hedges are recorded in other
comprehensive income (loss) (“OCI”) until the hedged item is recognized in earnings. Derivative instruments designated as cash flow hedges are de-
designated as hedges when it is probable that the forecasted hedged transaction will not occur in the initially identified time period or within a subsequent
two-month time period. Gains and losses in OCI associated with such derivative instruments are reclassified immediately into earnings through interest and
other income, net. Any subsequent changes in the fair value of such derivative instruments also are reflected in current earnings. Derivatives that are not
designated as hedging instruments and the ineffective portions of cash flow hedges are adjusted to fair value through earnings in interest and other income,
net.
Income Taxes
The Company accounts for income taxes under the asset and liability method. Under this method, deferred tax assets and liabilities are recognized for
the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their
respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the year in which those
temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in
income in the period that includes the enactment date. Valuation allowances are established or adjusted, as necessary, to reflect the amount of deferred tax
assets that are more likely than not to be realized in the future.
The Company recognizes tax benefits from uncertain tax positions only if it is more likely than not that the tax position will be sustained on
examination by the taxing authorities, based on the technical merits of the position. The tax benefits recognized in the Consolidated Financial Statements
from such positions are then measured based on the largest benefit that has a greater than 50% likelihood of being realized upon ultimate settlement. The
Company includes interest and penalties on unrecognized tax benefits as a component of its income tax expense.
The Company recognizes excess tax benefits and tax deficiencies in the provision for income taxes as discrete items in the period when the awards vest
or are settled. The Company accounts for Global Intangible Low-Taxed Income (“GILTI”) as period costs when incurred.
101

-- 103 of 187 --

Table of Contents
Legal Contingencies
From time to time, the Company is involved in legal proceedings involving product liability, intellectual property, shareholder derivative actions,
securities class actions, employees, and other matters. A liability and related charge are recorded to earnings in the Company’s Consolidated Financial
Statements for legal contingencies when the loss is considered probable and the amount can be reasonably estimated. The assessment is re-evaluated each
period and is based on all available information, including discussion with any outside legal counsel that represents the Company. If a reasonable estimate
of a known or probable loss cannot be made, but a range of probable losses can be estimated, the low-end of the range of losses is recognized if no amount
within the range is a better estimate than any other. If a material loss is reasonably possible but not probable and can be reasonably estimated, the estimated
loss or range of loss is disclosed in the Notes to the Consolidated Financial Statements. The Company expenses legal fees as incurred.
When determining the estimated probable loss or range of losses, significant judgment is required to be exercised in order to estimate the amount and
timing of the loss to be recorded. Estimates of probable losses resulting from litigation are inherently difficult to make, particularly when the matters are in
early procedural stages with incomplete facts and information. The final outcome of legal proceedings is dependent on many variables that are difficult to
predict and, therefore, the ultimate cost to entirely resolve such matters may be materially different than the amount of current estimates. Consequently,
new information or changes in judgments and estimates could have a material adverse effect on the Company’s business, financial condition, and results of
operations or cash flows.
Recently Adopted Accounting Pronouncements
In December 2023, the FASB issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures (“ASU 2023-09”), which
requires enhanced income tax disclosures, including specific categories and disaggregation of information in the effective tax rate reconciliation,
disaggregated information related to income taxes paid, income or loss from continuing operations before income tax expense or benefit, and income tax
expense or benefit from continuing operations. The Company adopted ASU 2023-09 during the fourth quarter of 2025 on a prospective basis. The standard
did not have a material impact on the Company’s Financial Statements. Refer to Note 11 for more information.
Recently Issued Accounting Pronouncements
In November 2024, the FASB issued ASU 2024-03, Income Statement—Reporting Comprehensive Income—Expense Disaggregation Disclosures
(Subtopic 220-40): Disaggregation of Income Statement Expenses (“ASU 2024-03”), which requires disclosure about the types of costs and expenses
included in certain expense captions presented on the income statement. The new disclosure requirements are effective for the Company’s annual periods
beginning after December 15, 2026, and interim periods beginning after December 15, 2027, with early adoption permitted. The Company is currently in
the process of evaluating the impact of this pronouncement on its related disclosures.
In September 2025, the FASB issued ASU 2025-06, Intangibles—Goodwill and Other—Internal-Use Software (Subtopic 350-40): Targeted
Improvements to the Accounting for Internal-Use Software (“ASU 2025-06”), which modernizes the accounting for internal-use software costs. ASU 2025-
06 is effective for annual periods beginning after December 15, 2027, with early adoption permitted as of the beginning of an annual period. The Company
is currently in the process of evaluating the impact of this pronouncement on its consolidated financial statements and related disclosures.
In September 2025, the FASB issued ASU 2025-07, Derivatives and Hedging (Topic 815) and Revenue from Contracts with Customers (Topic 606):
Derivative Scope Refinements and Scope Clarification for Share-Based Noncash Consideration from a Customer in a Revenue Contract (“ASU 2025-07”),
which refines the scope of derivative accounting and clarifies the guidance on share-based payments from a customer in revenue arrangements. ASU 2025-
07 is effective for annual periods beginning after December 15, 2026, with early adoption permitted. The Company does not expect this standard to have a
material impact on its consolidated financial statements and related disclosures.
In July 2025, the FASB issued ASU 2025-05, Financial Instruments - Credit Losses (Topic 326): Measurement of Credit Losses for Accounts
Receivable and Contract Assets (“ASU 2025-05”), which provides a practical expedient and an accounting policy election related to the estimation of
expected credit losses for current accounts receivable and current contract assets. ASU 2025-05 is effective for annual periods beginning after December
15, 2025. The Company does not expect this standard to have a material impact on its consolidated financial statements and related disclosures.
The Company continues to monitor new accounting pronouncements issued by the FASB and does not believe any accounting pronouncements issued
through the date of this report will have a material impact on the Company’s Consolidated Financial Statements.
102

-- 104 of 187 --

Table of Contents
NOTE 3. FINANCIAL INSTRUMENTS
Cash, Cash Equivalents, and Investments
The following tables summarize the Company’s cash and available-for-sale debt securities’ amortized cost, gross unrealized gains, gross unrealized
losses, allowance for credit loss, and fair value by significant investment category reported as cash and cash equivalents, short-term investments, or long-
term investments as of December 31, 2025, and 2024 (in millions):
Reported as:
Amortized
Cost
Gross
Unrealized
Gains
Gross
Unrealized
Losses Allowance for
Credit Loss
Fair
Value
Cash and
Cash
Equivalents Short-term
Investments
Long-term
Investments
December 31, 2025
Cash 	$ 	514.9 $ 	— $ 	— $ 	— $ 	514.9 $ 	514.9 $ 	— $ 	—
Level 1:
Money market funds 	2,287.0 	— 	— 	— 	2,287.0 	2,287.0 	— 	—
U.S. treasuries 	5,694.3 	39.0 	(0.9) 	— 	5,732.4 	565.1 	2,345.5 	2,821.8
Subtotal 	7,981.3 	39.0 	(0.9) 	— 	8,019.4 	2,852.1 	2,345.5 	2,821.8
Level 2:
Corporate debt securities 	167.8 	— 	(0.7) 	(0.1) 	167.0 	1.0 	78.4 	87.6
U.S. government agencies 	330.6 	2.3 	(0.1) 	— 	332.8 	— 	143.0 	189.8
Subtotal 	498.4 	2.3 	(0.8) 	(0.1) 	499.8 	1.0 	221.4 	277.4
Total assets measured at
fair value 	$ 	8,994.6 $ 	41.3 $ 	(1.7) $ 	(0.1) $ 	9,034.1 $ 	3,368.0 $ 	2,566.9 $ 	3,099.2
Reported as:
Amortized
Cost
Gross
Unrealized
Gains
Gross
Unrealized
Losses Allowance for
Credit Loss Fair
Value
Cash and
Cash
Equivalents Short-term
Investments Long-term
Investments
December 31, 2024
Cash 	$ 	479.4 $ 	— $ 	— $ 	— $ 	479.4 $ 	479.4 $ 	— $ 	—
Level 1:
Money market funds 	1,516.1 	— 	— 	— 	1,516.1 	1,516.1 	— 	—
U.S. treasuries 	6,011.5 	13.2 	(27.5) 	— 	5,997.2 	31.9 	1,637.4 	4,327.9
Subtotal 	7,527.6 	13.2 	(27.5) 	— 	7,513.3 	1,548.0 	1,637.4 	4,327.9
Level 2:
Corporate debt securities 	287.5 	0.1 	(3.7) 	(0.1) 	283.8 	— 	189.7 	94.1
U.S. government agencies 	552.2 	1.5 	(2.4) 	— 	551.3 	— 	154.2 	397.1
Municipal securities 	4.7 	— 	(0.1) 	— 	4.6 	— 	4.6 	—
Subtotal 	844.4 	1.6 	(6.2) 	(0.1) 	839.7 	— 	348.5 	491.2
Total assets measured at
fair value 	$ 	8,851.4 $ 	14.8 $ 	(33.7) $ 	(0.1) $ 	8,832.4 $ 	2,027.4 $ 	1,985.9 $ 	4,819.1
The following table summarizes the contractual maturities of the Company’s cash equivalents and available-for-sale debt securities (excluding money
market funds), as of December 31, 2025 (in millions):
Amortized
Cost Fair
Value
Mature in less than one year 	$ 	3,126.0 $ 	3,133.0
Mature in one to five years 	3,066.7 	3,099.2
Total 	$ 	6,192.7 $ 	6,232.2
103

-- 105 of 187 --

Table of Contents
Actual maturities may differ from contractual maturities, because certain borrowers have the right to call or prepay certain obligations. Gross realized
gains and losses recognized on the sale of investments were immaterial for the years ended December 31, 2025, and 2024.
The following tables present the breakdown of the available-for-sale debt securities with unrealized losses as of December 31, 2025, and 2024 (in
millions):
Unrealized losses less
than 12 months Unrealized losses 12
months or greater 	Total
December 31, 2025 Fair
Value Unrealized
Losses Fair
Value Unrealized
Losses Fair
Value Unrealized
Losses
U.S. treasuries 	$ 	298.0 $ 	(0.3) $ 	164.4 $ 	(0.6) $ 	462.4 $ 	(0.9)
Corporate debt securities 	44.5 	— 	73.6 	(0.7) 	118.1 	(0.7)
U.S. government agencies 	— 	— 	29.2 	(0.1) 	29.2 	(0.1)
Total 	$ 	342.5 $ 	(0.3) $ 	267.2 $ 	(1.4) $ 	609.7 $ 	(1.7)
December 31, 2024
U.S. treasuries 	$ 	2,744.4 $ 	(23.3) $ 	190.1 $ 	(4.2) $ 	2,934.5 $ 	(27.5)
Corporate debt securities 	— 	— 	218.7 	(3.7) 	218.7 	(3.7)
U.S. government agencies 	178.1 	(1.2) 	106.7 	(1.2) 	284.8 	(2.4)
Municipal securities 	— 	— 	4.6 	(0.1) 	4.6 	(0.1)
Total 	$ 	2,922.5 $ 	(24.5) $ 	520.1 $ 	(9.2) $ 	3,442.6 $ 	(33.7)
The current unrealized losses on the Company’s available-for-sale debt securities were caused by interest rate increases. The contractual terms of those
investments do not permit the issuer to settle the securities at a price less than the amortized cost basis of the investments. As of December 31, 2025, the
Company does not intend to sell the investments in unrealized loss positions, and it is not more-likely-than-not that the Company will be required to sell
any of the investments before recovery of their amortized cost basis, which may be at maturity. Therefore, the Company does not expect to realize any
losses on these available-for-sale debt securities. Additional factors considered in determining the treatment of unrealized losses include the financial
condition and near-term prospects of the investee, the extent of the loss related to the credit of the issuer, and the expected cash flows from the security.
Equity Investments
The following table is a summary of the activity related to equity investments (in millions):
Reported as:
December 31, 2024
Carrying Value Changes in
Fair Value
Purchases /
Sales / Other December 31, 2025
Carrying Value
Prepaids and
other current
assets Intangible and
other assets, net
Equity investments without readily
determinable fair value 	$ 	84.6 $ 	(2.0) $ 	39.1 $ 	121.7 $ 	— $ 	121.7
Recorded in interest and other income, net.
Other includes foreign currency translation gains/(losses).
During 2025, the Company did not hold any equity investments with readily determinable fair values.
During 2025, for equity investments without readily determinable fair value, the Company recognized a net decrease in fair value of $2.0 million
primarily due to impairments and net decreases in observable price changes for certain equity investments, partially offset by a gain from the sale of an
equity investment, which were reflected in interest and other income, net.
Foreign Currency Derivatives
The objective of the Company’s hedging program is to mitigate the impact of changes in currency exchange rates on net cash flow from foreign
currency-denominated sales, expenses, intercompany balances, and other monetary assets or liabilities denominated in currencies other than the U.S. dollar
(“USD”). The terms of the Company’s derivative contracts are generally thirteen months or shorter. The derivative assets and liabilities are measured using
Level 2 fair value inputs.
Cash Flow Hedges. The Company enters into currency forward contracts as cash flow hedges to hedge certain forecasted revenue transactions
denominated in currencies other than the USD, primarily the Euro (“EUR”), the British Pound (“GBP”),
(1) 	(2)
(1)
(2)
104

-- 106 of 187 --

Table of Contents
the Japanese Yen (“JPY”), the Korean Won (“KRW”), the New Taiwan Dollar (“TWD”), the Canadian Dollar (“CAD”), and the Indian Rupee (“INR”). The
Company also enters into currency forward contracts as cash flow hedges to hedge certain forecasted expense transactions denominated in EUR and the
Swiss Franc (“CHF”).
For these derivatives, the Company reports the unrealized after-tax gain or loss from the hedge as a component of accumulated other comprehensive
income (loss) in stockholders’ equity and reclassifies the amount into earnings in the same period in which the hedged transaction affects earnings. The
amounts reclassified to revenue and expenses related to the hedged transactions and the ineffective portions of cash flow hedges were not material for the
periods presented.
Other Derivatives Not Designated as Hedging Instruments. Other derivatives not designated as hedging instruments consist primarily of forward
contracts that the Company uses to hedge intercompany balances and other monetary assets or liabilities denominated in currencies other than the USD,
primarily the EUR, GBP, JPY, KRW, CHF, TWD, INR, and the Chinese Yuan (“CNY”).
These derivative instruments are used to hedge against balance sheet foreign currency exposures. The related gains and losses were as follows (in
millions):
Year Ended December 31,
2025 	2024 	2023
Recognized gains (losses) in interest and other income, net 	$ 	(5.5) $ 	43.2 $ 	4.8
Foreign exchange losses related to balance sheet re-measurement 	$ 	(7.5) $ 	(45.9) $ 	(8.5)
The notional amounts for derivative instruments provide one measure of the transaction volume. Total gross notional amounts (in USD) for
outstanding derivatives and the aggregate gross fair value at the end of each period were as follows (in millions):
Derivatives Designated as Hedging
Instruments
Derivatives Not Designated as Hedging
Instruments
December 31,
2025 December 31,
2024 December 31,
2025 December 31,
2024
Notional amounts:
Forward contracts 	$ 	535.5 $ 	382.2 $ 	798.7 $ 	693.5
Gross fair value recorded in:
Prepaids and other current assets 	$ 	8.8 $ 	14.9 $ 	10.7 $ 	13.0
Other accrued liabilities 	$ 	4.1 $ 	2.1 $ 	6.6 $ 	2.4
NOTE 4. CONSOLIDATED FINANCIAL STATEMENT DETAILS
Balance Sheet Details
The following tables provide details of selected consolidated financial statement items (in millions):
December 31,
Accounts receivable, net 	2025 	2024
Trade accounts receivable, net 	$ 	1,357.7 $ 	1,117.2
Unbilled accounts receivable and other 	196.3 	138.7
Sales returns and allowances 	(26.7) 	(30.5)
Total accounts receivable, net 	$ 	1,527.3 $ 	1,225.4
December 31,
Inventory 	2025 	2024
Raw materials 	$ 	561.1 $ 	563.9
Work-in-process 	287.9 	205.7
Finished goods 	991.0 	717.6
Total inventory 	$ 	1,840.0 $ 	1,487.2
105

-- 107 of 187 --

Table of Contents
December 31,
Prepaids and other current assets 	2025 	2024
Net investment in sales-type leases – short-term 	$ 	100.9 $ 	131.4
Other prepaids and other current assets 	376.4 	253.7
Total prepaids and other current assets 	$ 	477.3 $ 	385.1
December 31,
Property, plant, and equipment, net 	2025 	2024
Land 	$ 	479.7 $ 	476.4
Building and building/leasehold improvements 	2,833.9 	1,486.3
Machinery and equipment 	1,023.6 	886.3
Operating lease assets – Intuitive System Leasing 	2,096.6 	1,579.1
Computer and office equipment 	247.7 	184.5
Capitalized software 	299.3 	283.7
Construction-in-process 	638.1 	1,631.6
Gross property, plant, and equipment 	7,618.9 	6,527.9
Less: Accumulated depreciation* 	(2,276.5) 	(1,881.3)
Total property, plant, and equipment, net 	$ 	5,342.4 $ 	4,646.6
*Accumulated depreciation associated with operating lease assets – Intuitive System Leasing 	$ 	(725.2) $ 	(574.5)
December 31,
Other accrued liabilities – short-term 	2025 	2024
Income and other taxes payable 	$ 	125.4 $ 	154.4
Accrued construction-related capital expenditures 	58.3 	57.2
Other accrued liabilities 	412.3 	335.9
Total other accrued liabilities – short-term 	$ 	596.0 $ 	547.5
December 31,
Other long-term liabilities 	2025 	2024
Income taxes – long-term 	$ 	193.6 $ 	239.0
Deferred revenue – long-term 	91.4 	54.1
Other long-term liabilities 	225.8 	175.2
Total other long-term liabilities 	$ 	510.8 $ 	468.3
Supplemental Cash Flow Information
The following table provides details of income taxes paid and supplemental non-cash investing and financing activities (in millions):
Year Ended December 31,
2025 	2024 	2023
Income taxes paid, net 	$ 	537.9 $ 	466.5 $ 	447.8
Supplemental non-cash investing and financing activities:
Equipment transfers, including operating lease assets, from inventory to property, plant,
and equipment 	$ 	808.9 $ 	614.9 $ 	422.4
Acquisition of property, plant, and equipment in accounts payable and accrued liabilities $ 	70.6 $ 	77.2 $ 	153.7
106

-- 108 of 187 --

Table of Contents
Restricted Cash
The following table provides details of total cash, cash equivalents, and restricted cash as of the periods presented (in millions):
As of
December 31,
2025 December 31,
2024
Cash and cash equivalents 	$ 	3,368.0 $ 	2,027.4
Restricted cash within other current assets 	24.4 	20.0
Restricted cash within other assets 	15.0 	15.0
Total cash, cash equivalents, and restricted cash 	$ 	3,407.4 $ 	2,062.4
NOTE 5. REVENUE
Revenue from external customers is attributed to individual countries based on customer location. The following table presents revenue disaggregated
by geography and type (in millions):
Year Ended December 31,
U.S. 	2025 	2024 	2023
Instruments and accessories 	$ 	4,203.4 $ 	3,626.4 $ 	3,059.8
Systems 	1,581.8 	1,122.6 	865.5
Services 	1,030.6 	840.4 	763.3
Total U.S. revenue 	$ 	6,815.8 $ 	5,589.4 $ 	4,688.6
OUS
Instruments and accessories 	$ 	1,815.5 $ 	1,452.6 $ 	1,216.8
Systems 	891.9 	843.4 	814.2
Services 	541.5 	466.7 	404.5
Total OUS revenue 	$ 	3,248.9 $ 	2,762.7 $ 	2,435.5
Total
Instruments and accessories 	$ 	6,018.9 $ 	5,079.0 $ 	4,276.6
Systems 	2,473.7 	1,966.0 	1,679.7
Services 	1,572.1 	1,307.1 	1,167.8
Total revenue 	$ 	10,064.7 $ 	8,352.1 $ 	7,124.1
Remaining Performance Obligations
The transaction price allocated to remaining performance obligations relates to amounts allocated to products and services for which revenue has not
yet been recognized. A significant portion of these performance obligations relate to service obligations in the Company’s system sale and lease
arrangements that will be satisfied and recognized as revenue in future periods. The transaction price allocated to the remaining performance obligations
was $3.0 billion as of December 31, 2025. The remaining performance obligations are expected to be satisfied over the term of the system sale, lease, and
service arrangements. Approximately half of the remaining performance obligations are expected to be recognized in the next 12 months with the
remainder recognized thereafter over the term of the system sale, lease, and service arrangements, which are generally up to 5 years.
107

-- 109 of 187 --

Table of Contents
Contract Assets and Liabilities
The following information summarizes the Company’s contract assets and liabilities (in millions):
December 31,
2025 	2024
Contract assets 	$ 	15.3 $ 	13.9
Deferred revenue 	$ 	598.1 $ 	522.9
Contract assets for the periods presented primarily represent the difference between the revenue that was recognized based on the relative standalone
selling price of the related performance obligations satisfied and the contractual billing terms in the arrangements. The Company did not have significant
impairment losses on its contract assets for any of the periods presented.
The Company invoices its customers based on the billing schedules in its sales arrangements. Payments are generally due 30 to 60 days from the date
of invoice.
Deferred revenue for the periods presented primarily relates to service contracts where the service fees are billed up-front, generally quarterly or
annually, prior to those services having been performed. The associated deferred revenue is generally recognized over the term of the service period.
During the year ended December 31, 2025, the Company recognized $459 million of revenue that was included in the deferred revenue balance as of
December 31, 2024. During the year ended December 31, 2024, the Company recognized $422 million of revenue that was included in the deferred
revenue balance as of December 31, 2023.
Intuitive System Leasing
The following table presents product revenue from Intuitive System Leasing arrangements (in millions):
Year Ended December 31,
2025 	2024 	2023
Sales-type lease revenue 	$ 	97.3 $ 	163.1 $ 	78.4
Operating lease revenue* 	$ 	874.3 $ 	654.2 $ 	500.5
*Variable lease revenue related to usage-based arrangements included within operating lease
revenue 	$ 	530.9 $ 	338.4 $ 	216.5
NOTE 6. LEASES
Lessor Information related to Intuitive System Leasing
Sales-type Leases. Lease receivables relating to sales-type lease arrangements are presented on the Consolidated Balance Sheets as follows (in
millions):
December 31,
2025 	2024
Gross lease receivables 	$ 	317.5 $ 	393.4
Unearned income 	(14.7) 	(13.9)
Subtotal 	302.8 	379.5
Allowance for credit loss 	(2.6) 	(2.6)
Net investment in sales-type leases 	$ 	300.2 $ 	376.9
Reported as:
Prepaids and other current assets 	$ 	100.9 $ 	131.4
Intangible and other assets, net 	199.3 	245.5
Net investment in sales-type leases 	$ 	300.2 $ 	376.9
108

-- 110 of 187 --

Table of Contents
Contractual maturities of gross lease receivables as of December 31, 2025, are as follows (in millions):
Fiscal Year 	Amount
2026 	$ 	111.9
2027 	90.6
2028 	58.8
2029 	38.9
2030 	12.4
2031 and thereafter 	4.9
Total 	$ 	317.5
Operating Leases. The Company’s fixed-payment or usage-based operating lease terms are generally less than seven years. Future lease payments
(excluding non-lease elements and contingent payments related to usage-based arrangements) related to the non-cancellable portion of operating leases as
of December 31, 2025, are as follows (in millions):
Fiscal Year 	Amount
2026 	$ 	326.1
2027 	269.7
2028 	208.6
2029 	151.1
2030 	83.5
2031 and thereafter 	61.9
Total 	$ 	1,100.9
Lessee Information
The Company enters into operating leases primarily for real estate, automobiles, and certain equipment. Operating lease expense was $40.9 million,
$33.9 million, and $26.8 million for the years ended December 31, 2025, 2024, and 2023, respectively. For leases with terms of 12 months or less, the
related expense was immaterial for each of the years ended December 31, 2025, 2024, and 2023.
Supplemental cash flow information for the years ended December 31, 2025, 2024, and 2023 related to operating leases was as follows (in millions):
Year Ended December 31,
2025 	2024 	2023
Cash paid for leases that were included within operating cash outflows 	$ 	40.6 $ 	33.2 $ 	30.2
Right-of-use assets recognized related to new lease obligations 	$ 	46.2 $ 	88.6 $ 	27.8
Supplemental balance sheet information related to operating leases, as of December 31, 2025, and 2024, was as follows (in millions, except lease term
and discount rate):
December 31,
2025 	2024
Intangible and other assets, net (Right-of-use assets) 	$ 	150.8 $ 	136.4
Other accrued liabilities 	$ 	39.0 $ 	33.5
Other long-term liabilities 	131.9 	112.5
Total lease liabilities 	$ 	170.9 $ 	146.0
Weighted-average remaining lease term 	6.0 years 	5.2 years
Weighted-average discount rate 	4.6% 	4.4%
109

-- 111 of 187 --

Table of Contents
As of December 31, 2025, the future payments related to the Company’s operating lease liabilities are scheduled as follows (in millions):
Fiscal Year 	Amount
2026 	$ 	44.5
2027 	35.3
2028 	33.7
2029 	25.5
2030 	15.2
2031 and thereafter 	45.0
Total lease payments 	199.2
Less: imputed interest 	(28.3)
Total operating lease liabilities 	$ 	170.9
NOTE 7. GOODWILL AND INTANGIBLE ASSETS
Acquisitions
In November 2025, Intuitive acquired a company that develops integrated robotics and artificial intelligence solutions to improve the accuracy,
efficiency, and accessibility of tissue assessment during biopsy procedures at the point of care. The total purchase consideration for the acquisition was not
material.
There were no material acquisitions in 2024 or 2023.
Pending Acquisitions
On January 21, 2025, the Company announced that it has entered into a definitive agreement with the current Intuitive technology distributors ab
medica, Abex, Excelencia Robotica, and their affiliates to acquire the da Vinci and Ion distribution businesses in Italy, Spain, Portugal, Malta, and San
Marino, and associated territories. The transaction consists of an upfront cash payment of approximately €319 million, subject to certain closing
adjustments. The Company expects to complete the transaction in the first half of 2026, subject to applicable regulatory approvals and customary closing
conditions.
Goodwill
The following table summarizes the changes in the carrying amount of goodwill (in millions):
Amount
Balance as of December 31, 2023 	$ 	348.7
Acquisition activity 	—
Translation and other 	(1.2)
Balance as of December 31, 2024 	347.5
Acquisition activity 	22.3
Translation and other 	0.5
Balance as of December 31, 2025 	$ 	370.3
The Company completed its annual goodwill impairment test and determined that no impairment existed. As of December 31, 2025, there has been no
impairment of goodwill.
110

-- 112 of 187 --

Table of Contents
Intangible Assets
The following table summarizes the components of gross intangible asset, accumulated amortization, and net intangible asset balances as of
December 31, 2025, and 2024 (in millions):
December 31, 2025 	December 31, 2024
Gross Carrying
Amount
Accumulated
Amortization
Net
Carrying
Amount Gross Carrying
Amount
Accumulated
Amortization
Net
Carrying
Amount
Patents and developed technology 	$ 	192.8 $ 	(182.8) $ 	10.0 $ 	203.3 $ 	(185.4) $ 	17.9
Customer relationships 	28.2 	(27.1) 	1.1 	27.3 	(22.3) 	5.0
Distribution rights and others 	— 	— 	— 	1.2 	(1.1) 	0.1
Total definite-lived intangible assets 	$ 	221.0 $ 	(209.9) $ 	11.1 $ 	231.8 $ 	(208.8) $ 	23.0
In-process R&D 	6.0 	— 	6.0 	— 	— 	—
Total intangible assets 	$ 	227.0 $ 	(209.9) $ 	17.1 $ 	231.8 $ 	(208.8) $ 	23.0
Amortization expense related to intangible assets was $13.2 million, $16.7 million, and $20.2 million for the years ended December 31, 2025, 2024,
and 2023, respectively.
The estimated future amortization expense related to intangible assets as of December 31, 2025, is as follows (in millions):
Fiscal Year 	Amount
2026 	$ 	5.7
2027 	3.0
2028 	1.4
2029 	0.6
2030 	0.4
Total 	$ 	11.1
The preceding expected amortization expense is an estimate. Actual amounts of amortization expense may differ from estimated amounts due to
additional intangible asset acquisitions, measurement period adjustments to intangible assets, changes in foreign currency exchange rates, impairments of
intangible assets, accelerated amortization of intangible assets, and other events.
NOTE 8. COMMITMENTS AND CONTINGENCIES
Commitments
As of December 31, 2025, the Company’s commitments include an estimated amount of approximately $2.53 billion relating to the Company’s open
purchase orders and contractual obligations that occur in the ordinary course of business, including commitments with contract manufacturers and suppliers
for which the Company has not received the goods or services, commitments for capital expenditures and construction-related activities for which the
Company has not received the services, and acquisition and licensing of intellectual property. Although open purchase orders are considered enforceable
and legally binding, the terms generally allow the Company the option to cancel, reschedule, and adjust its requirements based on its business needs prior
to the delivery of goods or performance of services. Additionally, the Company has committed to making certain future milestone payments to third parties
as part of licensing, collaboration, and development arrangements. Payments under these arrangements generally become due and payable only upon the
achievement of certain specified developmental, regulatory, and/or commercial milestones. For instances in which the achievement of these milestones is
neither probable nor reasonably estimable, such contingencies are not included in the estimated amount.
Contingencies
From time to time, the Company is involved in a variety of claims, lawsuits, investigations, and proceedings relating to securities laws, product
liability, intellectual property, commercial, insurance, contract disputes, employment, and other matters. Certain of these lawsuits and claims are described
in further detail below. It is not possible to predict what the outcome of these matters will be, and the Company cannot guarantee that any resolution will be
reached on commercially reasonable terms, if at all.
A liability and related charge to earnings are recorded in the Consolidated Financial Statements for legal contingencies when the loss is considered
probable and the amount can be reasonably estimated. The assessment is re-evaluated each
111

-- 113 of 187 --

Table of Contents
accounting period and is based on all available information, including the impact of negotiations, settlements, rulings, advice of legal counsel, and other
information and events pertaining to each case. Nevertheless, it is possible that additional future legal costs (including settlements, judgments, legal fees,
and other related defense costs) could have a material adverse effect on the Company’s business, financial condition, or future results of operations.
Product Liability Litigation
The Company is currently named as a defendant in a number of individual product liability lawsuits filed in various state and federal courts. The
plaintiffs generally allege that they or a family member underwent surgical procedures that utilized the da Vinci surgical system and sustained a variety of
personal injuries and, in some cases, death as a result of such surgery.
The cases raise a variety of allegations including, to varying degrees, that plaintiffs’ injuries resulted from purported defects in the da Vinci surgical
system and/or failure on the Company’s part to provide adequate training resources to the healthcare professionals who performed plaintiffs’ surgeries. The
cases further allege that the Company failed to adequately disclose and/or misrepresented the potential risks and/or benefits of the da Vinci surgical system.
Plaintiffs also assert a variety of causes of action, including, for example, strict liability based on purported design defects, negligence, fraud, breach of
express and implied warranties, unjust enrichment, and loss of consortium. Plaintiffs seek recovery for alleged personal injuries and, in many cases,
punitive damages. The Company disputes these allegations and is defending against these claims.
The Company’s estimate of the anticipated cost of resolving the pending cases is based on negotiations with attorneys for the claimants. The final
outcome of the pending lawsuits and claims, and others that might arise, is dependent on many variables that are difficult to predict, and the ultimate cost
associated with these product liability lawsuits and claims may be materially different than the amount of the current estimate and accruals and could have
a material adverse effect on the Company’s business, financial condition, or future results of operations. Although there is a reasonable possibility that a
loss in excess of the amount recognized exists, the Company is unable to estimate the possible loss or range of loss in excess of the amount recognized at
this time.
Commercial Litigation
On May 10, 2021, Surgical Instrument Service Company, Inc. (“SIS”) filed a complaint in the Northern District of California Court alleging antitrust
claims against the Company relating to EndoWrist service, maintenance, and repair processes. The Court granted in part and denied in part the Company’s
Motion to Dismiss, and discovery commenced. The Company filed an answer denying the antitrust allegations and filed counterclaims against SIS. The
counterclaims allege that SIS violated the Federal Lanham Act, California’s Unfair Competition Law, and California’s False Advertising Law and that SIS
is also liable to the Company for Unfair Competition and Tortious Interference with Contract. The parties filed summary judgment motions, and the Court
held a hearing on these motions on September 7, 2023.
On March 31, 2024, the Court granted-in-part and denied-in-part both Intuitive’s and plaintiff’s motions for summary judgment. Trial in this matter
commenced on January 6, 2025. On January 28, 2025, after the close of both plaintiff’s and Intuitive’s cases in chief, the Court found in Intuitive’s favor on
all of SIS’s antitrust claims and stayed Intuitive’s counterclaims. On February 27, 2025, SIS filed a Notice of Appeal to the Ninth Circuit Court of Appeals.
SIS filed its brief on July 23, 2025. The Company filed its response brief on October 29, 2025. SIS filed its reply brief on December 26, 2025. It is
anticipated that oral argument will occur in April or May 2026. Based on currently available information, the Company is unable to make a reasonable
estimate of loss or range of losses, if any, arising from this matter.
Three class action complaints were filed against the Company in the Northern District of California Court alleging antitrust allegations relating to the
service and repair of certain instruments manufactured by the Company. A complaint by Larkin Community Hospital was filed on May 20, 2021, a
complaint by Franciscan Alliance, Inc. and King County Public Hospital District No. 1 was filed on July 6, 2021, and a complaint by Kaleida Health was
filed on July 8, 2021. The Court has consolidated the Franciscan Alliance, Inc. and King County Public Hospital District No. 1 and Kaleida Health cases
with the Larkin Community Hospital case, which is now captioned on the Larkin docket as “In Re: da Vinci Surgical Robot Antitrust Litigation.” A
Consolidated Amended Class Action Complaint has been filed on behalf of each plaintiff named in the earlier-filed cases. On January 14, 2022, Kaleida
Health voluntarily dismissed itself as a party to this case. On January 18, 2022, the Company filed an answer against the plaintiffs in this matter, and
discovery has commenced.
With regard to this class action case, on September 7, 2023, the Court heard argument on the parties’ respective motions for summary judgment and
motions related to expert testimony. On March 31, 2024, the Court granted-in-part and denied-in-part plaintiffs’ motion for summary judgment on certain
market definition issues, and denied Intuitive’s motion on the antitrust claims. In denying Intuitive’s motion, the Court declined to decide whether third-
party companies were required to obtain 510(k) clearance for their services with respect to EndoWrist instruments, and in the absence of a formal ruling
from the FDA on that question denied Intuitive’s motion for summary judgment challenging plaintiffs’ standing on that ground. There were additional
rulings on the expert witness issues as well. In the summary judgment order, the Court ruled with plaintiffs that the da Vinci robot and EndoWrist
instruments occupy separate product markets for antitrust purposes. The Court also ruled that
112

-- 114 of 187 --

Table of Contents
there is an antitrust aftermarket for the repair and replacement of EndoWrist instruments, and that Intuitive holds monopoly power in that aftermarket. The
Court denied summary judgment for plaintiffs on the issue of whether soft-tissue surgical robots constitute a relevant antitrust market or are part of a larger
market that includes laparoscopic and open surgery for antitrust purposes. On July 30, 2024, the Court granted Intuitive’s motion for reconsideration,
vacating those portions of the Court’s March 31, 2024 Order granting summary judgment as to the definition of a U.S. market for EndoWrist instrument
repair and replacement and Intuitive’s market power in such a market. On March 31, 2025, the Court granted plaintiff’s motion for class certification. No
trial date has been scheduled for this matter. Based on currently available information, the Company is unable to make a reasonable estimate of loss or
range of losses, if any, arising from this matter.
On September 18, 2024, Restore Robotics Repairs (“Restore”) filed a complaint in the United States District Court for the Northern District of Florida
alleging antitrust claims against the Company relating to the service and replacement of X/Xi EndoWrist instruments for use with the da Vinci X and Xi
surgical systems. On December 9, 2024, Intuitive filed a motion to dismiss to which plaintiff responded by amending its complaint. Intuitive filed a motion
to dismiss the first amended complaint on January 31, 2025. Plaintiff filed an opposition to Intuitive’s motion to dismiss on February 14, 2025, and
Intuitive filed a reply on March 26, 2025. On November 7, 2025, the Court entered an Order granting Intuitive’s motion to dismiss. Plaintiff filed its notice
of appeal to the 11 Circuit Court of Appeals on November 29, 2025. Restore’s initial brief is due February 11, 2026. Based on currently available
information, the Company is unable to make a reasonable estimate of loss or range of losses, if any, arising from this matter.
NOTE 9. STOCKHOLDERS’ EQUITY
Stock Repurchase Program
Through December 31, 2025, the Board has authorized an aggregate of $13.0 billion of funding for the Company’s common stock Repurchase
Program since its establishment in March 2009. The most recent authorization occurred in May 2025, when the Board increased the authorized amount
available under the Repurchase Program to $4.0 billion, including amounts remaining under previous authorization. As of December 31, 2025, the
remaining amount of share repurchases authorized by the Board under the Repurchase Program was approximately $1.7 billion.
The following table summarizes stock repurchase activities (in millions, except per share amounts):
Year Ended December 31,
2025 	2024 	2023
Shares repurchased 	4.8 	— 	1.7
Average price per share 	$ 	477.84 $ 	— $ 	241.38
Value of shares repurchased 	$ 	2,300.9 $ 	— $ 	416.3
The Company uses the par value method of accounting for its stock repurchases. As a result of share repurchase activities during the years ended
December 31, 2025, 2024, and 2023, the Company reduced common stock and additional paid-in capital by an aggregate of $63 million, zero, and $19
million, respectively, and charged $2.2 billion, zero, and $0.4 billion, respectively, to retained earnings.
The Company is subject to an excise tax on corporate stock repurchases, which is assessed as one percent of the fair market value of net stock
repurchases. As of December 31, 2025, excise tax of $5.6 million was accrued for shares repurchased in 2025.
th
113

-- 115 of 187 --

Table of Contents
Accumulated Other Comprehensive Income (Loss), Net of Tax, Attributable to Intuitive Surgical, Inc.
The components of accumulated other comprehensive income (loss), net of tax, attributable to Intuitive Surgical, Inc. are as follows (in millions):
Year Ended December 31, 2025
Gains (Losses)
on Hedge
Instruments
Unrealized
Gains (Losses) on
Available-for-Sale
Securities
Foreign
Currency
Translation
Gains
(Losses)
Employee Benefit
Plan Losses 	Total
Beginning balance 	$ 	11.0 $ 	(14.6) $ 	(33.1) $ 	(14.6) $ 	(51.3)
Other comprehensive income (loss) before reclassifications 	(6.7) 	44.8 	62.6 	(6.7) 	94.0
Amounts reclassified from accumulated other
comprehensive income (loss) 	(0.3) 	0.3 	— 	0.6 	0.6
Net current-period other comprehensive income (loss) 	(7.0) 	45.1 	62.6 	(6.1) 	94.6
Ending balance 	$ 	4.0 $ 	30.5 $ 	29.5 $ 	(20.7) $ 	43.3
Year Ended December 31, 2024
Gains (Losses)
on Hedge
Instruments
Unrealized
Losses on
Available-for-Sale
Securities
Foreign
Currency
Translation
Gains
(Losses)
Employee Benefit
Plan Gains
(Losses) 	Total
Beginning balance 	$ 	(2.5) $ 	(29.7) $ 	19.4 $ 	0.6 $ 	(12.2)
Other comprehensive income (loss) before reclassifications 	5.7 	15.0 	(52.5) 	(14.9) 	(46.7)
Amounts reclassified from accumulated other
comprehensive income (loss) 	7.8 	0.1 	— 	(0.3) 	7.6
Net current-period other comprehensive income (loss) 	13.5 	15.1 	(52.5) 	(15.2) 	(39.1)
Ending balance 	$ 	11.0 $ 	(14.6) $ 	(33.1) $ 	(14.6) $ 	(51.3)
The tax impacts for amounts recognized in other comprehensive income (loss) before reclassifications were as follows (in millions):
Year Ended December 31,
Available-for-sale securities 	2025 	2024
Income tax expense for net gains recorded in other comprehensive income (loss) 	$ 	(13.3) $ 	(4.3)
The tax impacts for amounts recognized in other comprehensive income (loss) before reclassifications for hedge instruments, foreign currency
translation gains (losses), and employee benefit plans in 2025 and 2024 were not material to the Company’s Consolidated Financial Statements. The tax
impacts for amounts reclassified from accumulated other comprehensive loss relating to hedge instruments, available-for-sale securities, foreign currency
translation gains (losses), and employee benefit plans in 2025 and 2024 were not material to the Company’s Consolidated Financial Statements.
NOTE 10. SHARE-BASED COMPENSATION
Stock Plans
2010 Incentive Award Plan. In April 2010, the Company’s stockholders approved the 2010 Incentive Award Plan (“2010 Plan”). Under this plan, the
Company can issue RSUs, nonqualified stock options (“NSOs”), and PSUs to employees, non-employee directors, and consultants. Equity awards granted
to employees and non-employee directors include a mix of RSUs, stock options, and, as applicable, PSUs. The 2010 Plan generally permits NSOs to be
granted at no less than the fair market value of the common stock on the date of grant. Prior to 2022, NSOs were granted with terms of 10 years from the
date of the grant. In January 2022, the Company changed the term of its new NSO grants to 7 years from the date of the grant. In May 2025, the Company’s
shareholders approved an amended and restated 2010 Incentive Award Plan to provide for an increase in the number of shares of common stock reserved
for issuance thereunder from 115,350,000 to 120,350,000. The 2010 Plan expires in 2035.
114

-- 116 of 187 --

Table of Contents
As of December 31, 2025, approximately 22.1 million shares were reserved for future issuance under the 2010 Plan. A maximum of approximately 9.6
million of these shares can be awarded as RSUs.
2009 Employment Commencement Incentive Plan. In October 2009, the Board adopted the 2009 Employment Commencement Incentive Plan (“New
Hire Plan”). In April 2015, the Board of Directors amended and restated the New Hire Plan to provide for an increase in the number of shares of common
stock authorized for issuance pursuant to awards granted under the New Hire Plan from 10,395,000 to 13,095,000. The New Hire Plan expired in October
2019 and, therefore, there are no shares reserved for future grants under the New Hire Plan. However, awards granted prior to the plan’s expiration continue
to remain outstanding until their original expiration date.
The New Hire Plan provided for the shares to be used exclusively for the grant of RSUs and NSOs to new employees (“New Hire Options”), who were
not previously employees or non-employee directors of the Company. Prior to expiration of the plan, options were granted at an exercise price not less than
the fair market value of the stock on the date of grant with a term not to exceed 10 years.
Restricted Stock Units. The RSUs granted to employees vest in one-fourth increments annually over a four-year period. The RSUs granted to existing
non-employee directors vest one year from the date of grant or at the next Annual Shareholders Meeting, whichever comes first. New non-employee
directors receive pro-rated RSU grants that vest on the same term as the annual RSU grants. The number of shares issued on the date the RSUs vest is net
of the minimum statutory tax withholdings, which are paid in cash to the appropriate taxing authorities on behalf of the Company’s employees.
Nonqualified Stock Options. From 2020 to 2022, annual NSO grants were made to employees on the last business day of February and on the same
date in August or, if that date is not a business day, the next business day. In 2023, the Company changed the timing of its bi-annual NSO grants to the last
trading day of February and August 10 or, if that date is not a trading day, the next trading day.
The February NSO grants vest 1/8 upon completion of 6 months of service and 1/48 per month thereafter for all grants prior to 2023 and vest 1/8 on
August 10 and 1/48 per month thereafter for grants in 2023. All August NSO grants vest 7/48 at the end of one month and 1/48 per month thereafter
through a 3.5-year vesting period. NSOs granted to new hires generally vest 1/4 upon completion of one year of service and 1/48 per month thereafter.
NSOs granted to existing non-employee directors vest one year from the date of grant or at the next Annual Shareholders Meeting, whichever comes first.
Option vesting terms are determined by the Board and, in the future, may vary from past practices.
Performance Stock Units. The PSUs granted to officers and other key employees are subject to three-year cliff vesting and pre-established, quantitative
goals. Whether any PSUs vest, and the amount that do vest, is tied to completion of service over three years and the achievement of three equally-weighted,
quantitative goals that directly align with or help drive the Company’s strategy and long-term total shareholder return.
2000 Non-Employee Directors’ Stock Option Plan. In March 2000, the Board adopted the 2000 Non-Employee Directors’ Stock Option Plan (the
“Directors’ Plan”). In October 2009, the automatic evergreen increase provisions were eliminated so that no further automatic increases would be made to
the number of shares reserved for issuance under the Directors’ Plan. In addition, the common stock authorized for issuance under the Directors’ Plan was
reduced to 1,350,000. The Directors’ Plan was terminated in November 2020 and, therefore, there are no shares reserved for future grants under the
Directors’ Plan. However, options granted prior to the plan’s termination continue to remain outstanding until their original expiration date. Prior to
termination, options were granted at an exercise price not less than the fair market value of the stock on the date of grant with a term not to exceed 10 years.
Prior to 2016, initial stock option grants to new non-employee directors vested over a three-year period with 1/3 of the shares vesting after one year from
the date of grant and 1/36 of the shares vesting monthly thereafter. Annual stock option grants vested one year from the date of the grant. From 2016 until
termination of the Directors’ Plan, new non-employee directors received pro-rated stock option grants that vested on the same term as the annual stock
option grants.
2000 Employee Stock Purchase Plan. In March 2000, the Board adopted the ESPP. Employees are generally eligible to participate in the ESPP if they
are customarily employed by the Company for more than 20 hours per week and more than 5 months in a calendar year and are not 5% stockholders of the
Company. Under the ESPP, eligible employees may select a rate of payroll deduction up to 15% of their eligible compensation subject to certain maximum
purchase limitations. The duration for each offering period is 24 months and is divided into four purchase periods of approximately six months in length.
Offerings are concurrent. The purchase price of the shares under the offering is the lesser of 85% of the fair market value of the shares on the offering date
or 85% of the fair market value of the shares on the purchase date. A two-year look-back feature in the ESPP causes the offering period to reset if the fair
value of the Company’s common stock on the first or last day of the purchase period is less than that on the original offering date. ESPP purchases by
employees are settled with newly-issued common stock from the ESPP’s previously authorized and available pool of shares. In April 2024, the Company’s
stockholders approved an amended and restated ESPP to provide for an increase in the number of shares of common stock reserved for issuance
115

-- 117 of 187 --

Table of Contents
from 22,770,945 to 26,770,945. As of December 31, 2025, there were approximately 4.9 million shares reserved for future issuance under the ESPP.
Restricted Stock Units
RSU activity for the year ended December 31, 2025, was as follows (in millions, except per share amounts):
Shares
Weighted-Average
Grant Date Fair Value
Per Share
Unvested balance as of December 31, 2024 	5.2 $ 	314.39
Granted 	1.7 $ 	569.90
Vested 	(1.9) $ 	296.23
Forfeited 	(0.3) $ 	371.69
Unvested balance as of December 31, 2025 	4.7 $ 	412.46
As of December 31, 2025, 4.4 million shares underlying RSUs were expected to vest with an aggregate intrinsic value of $2.49 billion. The aggregate
vesting date fair value of RSUs vested, excluding PSUs vested, was $1.09 billion, $0.73 billion, and $0.45 billion during the years ended December 31,
2025, 2024, and 2023, respectively.
Stock Options
NSO activity for the year ended December 31, 2025, was as follows (in millions, except per share amounts):
Stock Options Outstanding
Number
Outstanding
Weighted-Average
Exercise Price Per
Share
Balance as of December 31, 2024 	7.1 $ 	192.90
Options granted 	— $ 	—
Options exercised 	(1.6) $ 	139.46
Options forfeited/expired 	(0.1) $ 	244.38
Balance as of December 31, 2025 	5.4 $ 	208.18
The aggregate intrinsic value of stock options exercised under the Company’s stock plans determined as of the date of option exercise was $640
million, $789 million, and $476 million during the years ended December 31, 2025, 2024, and 2023, respectively. Cash received from stock option
exercises for the years ended December 31, 2025, 2024, and 2023, was $223 million, $315 million, and $192 million, respectively. The income tax benefit
from stock options exercised was $141 million for the year ended December 31, 2025.
116

-- 118 of 187 --

Table of Contents
The following table summarizes significant ranges of outstanding and exercisable options as of December 31, 2025 (number of shares and aggregate
intrinsic value in millions):
Options Outstanding 	Options Exercisable
Range of
Exercise Prices
Number
of Shares
Weighted-Average
Remaining
Contractual Life
Weighted-Average
Exercise Price
Per Share
Aggregate
Intrinsic
Value (1) Number
of Shares
Weighted-Average
Remaining
Contractual Life
Weighted-Average
Exercise Price
Per Share
Aggregate
Intrinsic
Value (1)
$59.46-$85.24 	0.6 	0.7 	$ 	73.86 	0.6 	$ 	73.86
$90.49-$161.78 	0.5 	1.9 	$ 	125.35 	0.5 	$ 	125.35
$163.77-$174.26 	0.7 	3.2 	$ 	169.71 	0.7 	$ 	169.71
$175.53-$182.83 	0.7 	3.6 	$ 	179.99 	0.7 	$ 	179.99
$182.90-$229.39 	1.0 	3.9 	$ 	217.52 	0.8 	$ 	215.34
$235.20-$245.60 	0.6 	4.9 	$ 	243.90 	0.6 	$ 	243.90
$249.83-$304.67 	1.0 	4.1 	$ 	296.62 	0.8 	$ 	295.21
$313.64-$340.27 	— 	4.4 	$ 	317.41 	— 	$ 	317.25
$341.16-$341.16 	— 	5.7 	$ 	341.16 	— 	$ 	341.16
$347.42-$347.42 	0.3 	5.6 	$ 	347.42 	0.3 	$ 	347.42
Total 	5.4 	3.5 	$ 	208.18 $ 	1,941 	5.0 	3.4 	$ 	203.69 $ 	1,822
(1) The aggregate intrinsic value represents the total pre-tax intrinsic value, based on the Company’s closing stock price of $566.36 as of December 31, 2025, which would have been received
by the option holders had all in-the-money option holders exercised their options as of that date.
As of December 31, 2025, a total of 5.4 million shares underlying stock options vested and expected to vest had a weighted-average remaining
contractual life of 3.5 years, an aggregate intrinsic value of $1.94 billion, and a weighted-average exercise price per share of $208.02.
Performance Stock Units
As of December 31, 2025, the Company has three types of active PSU awards: the 2025 PSU awards, the 2024 PSU awards, and the 2023 PSU
awards. The 2025 PSU award metrics are focused on relative average adjusted operating margin percentage over the performance period compared to a
peer group, da Vinci and Ion procedure growth in 2026 compared to 2024, and da Vinci and Ion procedure growth in 2027 compared to 2024. The 2024
PSU award metrics are focused on relative total shareholder return (“TSR”), da Vinci and Ion procedure growth in 2025 compared to 2023, and da Vinci
and Ion procedure growth in 2026 compared to 2023. The 2023 PSU award metrics are focused on relative TSR, da Vinci and Ion procedure growth in
2024 compared to 2022, and da Vinci and Ion procedure growth in 2025 compared to 2022.
The TSR metric is considered a market condition, and the expense is determined at the grant date. The procedure growth and relative average adjusted
operating margin percentage metrics are considered performance conditions, and the expense is recorded based on the forecasted performance, which is
reassessed each reporting period based on the probability of achieving the performance conditions. The number of shares earned at the end of the three-year
period will vary, based on actual performance, from 0% to 125% of the target number of PSUs granted. PSUs are subject to forfeiture if employment
terminates prior to the vesting date. PSUs are not considered issued or outstanding shares of the Company.
The Company calculates the fair value for each component of the PSUs individually. The fair value for the component with the TSR metric was
determined using Monte Carlo simulation. The fair value per share for the components with the procedure growth and relative average adjusted operating
margin percentage metrics is equal to the closing stock price on the grant date.
117

-- 119 of 187 --

Table of Contents
PSU activity for the year ended December 31, 2025, was as follows (in millions, except per share amounts):
Shares
Weighted-Average
Grant Date Fair Value
Per Share
Unvested balance as of December 31, 2024 	0.3 $ 	306.94
Granted 	0.1 $ 	575.73
Vested 	(0.1) $ 	294.89
Performance change 	— $ 	268.39
Forfeited 	— $ 	366.96
Unvested balance as of December 31, 2025 	0.3 $ 	374.67
As of December 31, 2025, 0.3 million shares underlying PSUs were expected to vest with an aggregate intrinsic value of $175 million. The aggregate
vesting date fair value of PSUs vested was $46 million during the year ended December 31, 2025 and $4 million during the year ended December 31, 2024.
No PSUs vested in 2023.
Employee Stock Purchase Plan
Under the ESPP, employees purchased approximately 0.4 million, 0.6 million, and 0.5 million shares, representing approximately $130 million, $115
million, and $105 million in employee contributions for the years ended December 31, 2025, 2024, and 2023, respectively.
Share-Based Compensation Expense
The following table summarizes share-based compensation expense (in millions):
Year Ended December 31,
2025 	2024 	2023
Cost of revenue—product 	$ 	120.7 $ 	98.5 $ 	83.4
Cost of revenue—service 	34.5 	30.5 	28.2
Total cost of revenue 	155.2 	129.0 	111.6
Selling, general and administrative 	346.5 	304.5 	274.8
Research and development 	301.1 	254.6 	211.8
Share-based compensation expense before income taxes 	802.8 	688.1 	598.2
Income tax benefit 	161.3 	138.3 	117.4
Share-based compensation expense after income taxes 	$ 	641.5 $ 	549.8 $ 	480.8
During the years ended December 31, 2025, 2024, and 2023, stock-based compensation expense capitalized to our Consolidated Balance Sheets was
$126.8 million, $98.9 million, and $84.3 million, respectively.
The Black-Scholes-Merton option-pricing model is used to estimate the fair value of stock options granted under the Company’s share-based
compensation plans and the rights to acquire stock granted under the ESPP. The weighted-average estimated fair values of stock options and the rights to
acquire stock under the ESPP, as well as the weighted-average
118

-- 120 of 187 --

Table of Contents
assumptions used in calculating the fair values of stock options and the rights to acquire stock under the ESPP that were granted during the years ended
December 31, 2025, 2024, and 2023, were as follows:
Year Ended December 31,
2025 	2024 	2023
RSUs
Fair value at grant date 	$569.90 	$392.89 	$237.37
STOCK OPTIONS
Risk-free interest rate 	— 	— 	4.6%
Expected term (in years) 	— 	— 	3.2
Expected volatility 	— 	— 	33%
Fair value at grant date 	— 	— 	$77.45
PSUs
Fair value at grant date 	$575.73 	$395.92 	$240.45
ESPP
Risk-free interest rate 	4.0% 	4.6% 	5.0%
Expected term (in years) 	1.2 	1.2 	1.2
Expected volatility 	31% 	29% 	33%
Fair value at grant date 	$154.69 	$130.00 	$89.42
As share-based compensation expense recognized in the Consolidated Statements of Income during the years ended December 31, 2025, 2024, and
2023, is based on awards ultimately expected to vest, it has been reduced for estimated forfeitures.
As of December 31, 2025, there was $1.25 billion, $28 million, $53 million, and $38 million of total unrecognized compensation expense related to
unvested RSUs, unvested stock options, unvested PSUs, and rights granted to acquire common stock under the ESPP, respectively. The unrecognized
compensation expense is expected to be recognized over a weighted-average period of 2.2 years for unvested RSUs, 1.0 year for unvested stock options,
1.0 year for unvested PSUs, and 1.0 year for rights granted to acquire common stock under the ESPP.
NOTE 11. INCOME TAXES
Income before provision for income taxes for the years ended December 31, 2025, 2024, and 2023, consisted of the following (in millions):
Year Ended December 31,
2025 	2024 	2023
U.S. 	$ 	2,283.8 $ 	1,754.8 $ 	1,251.1
Foreign 	1,027.6 	919.0 	707.8
Total income before provision for income taxes 	$ 	3,311.4 $ 	2,673.8 $ 	1,958.9
119

-- 121 of 187 --

Table of Contents
The provision for income taxes for the years ended December 31, 2025, 2024, and 2023, consisted of the following (in millions):
Year Ended December 31,
2025 	2024 	2023
Current
Federal 	$ 	235.6 $ 	321.9 $ 	315.2
State 	58.9 	47.9 	32.8
Foreign 	121.2 	101.8 	74.4
Total current income tax expense 	415.7 	471.6 	422.4
Deferred
Federal 	(34.4) 	(157.7) 	(122.4)
State 	(14.8) 	(23.9) 	(25.1)
Foreign 	68.3 	46.3 	(133.3)
Total deferred income tax expense (benefit) 	19.1 	(135.3) 	(280.8)
Total income tax expense 	$ 	434.8 $ 	336.3 $ 	141.6
On July 4, 2025, OBBBA was enacted, introducing amendments to U.S. tax laws with various effective dates from 2025 to 2027. The changes
introduced by OBBBA did not have a material impact on the Company’s effective tax rate for 2025.
The Company’s provision for income taxes for 2023 reflected Swiss tax benefits of $92.3 million, net of a $67.3 million valuation allowance, related to
certain tax assets recorded by our Swiss entity. In addition, a one-time net benefit of $67.1 million was recorded from the re-measurement of the
Company’s Swiss deferred tax assets resulting from the Swiss cantonal tax rate increase enacted in December 2023 for years after 2024 as well as a Swiss
cantonal tax rate increase from the discontinuation of the Company’s 2017 Swiss tax ruling, which was deemed effective as of January 1, 2023.
A reconciliation of the U.S. federal statutory rate to the Company’s effective tax rate for the year ended December 31, 2025, subsequent to the
adoption of ASU 2023-09, including the amount and percentage of income before taxes, was as follows (dollars in millions):
Year Ended December 31, 2025
Amount 	Percentage
U.S. federal tax at statutory rate 	$ 	695.4 	21.0 %
State and local income tax, net of federal effect 	35.0 	1.1 %
Foreign tax effects
Switzerland – Federal
Statutory tax rate difference between Switzerland and U.S. 	(57.0) 	(1.7)%
Other 	6.2 	0.2 %
Switzerland – Cantonal
Cantonal tax 	60.5 	1.8 %
Other foreign jurisdictions 	(35.0) 	(1.1)%
Effect of cross-border tax laws 	27.8 	0.8 %
Tax credits
Research and development tax credit 	(81.7) 	(2.5)%
Non-taxable or non-deductible items
Excess tax benefit 	(210.9) 	(6.4)%
Share-based compensation not benefitted 	38.1 	1.2 %
Other 	(24.1) 	(0.7)%
Changes in unrecognized tax benefits 	(12.1) 	(0.4)%
Other 	(7.4) 	(0.2)%
Effective tax rate 	$ 	434.8 	13.1 %
(1)
120

-- 122 of 187 --

Table of Contents
(1) State and local taxes in New York, Illinois, New Jersey, Minnesota, Texas, and Michigan made up greater than 50% of the tax effect in this category.
A reconciliation of the U.S. federal statutory rate of 21% to the Company’s effective rate for the years ended December 31, 2024 and 2023, prior to the
adoption of ASU 2023-09, was as follows (dollars in millions):
Year Ended December 31,
2024 	2023
Federal tax at statutory rate 	$ 	561.5 $ 	411.4
Increase (reduction) in tax resulting from:
State taxes, net of federal benefits 	41.7 	35.0
Foreign rate differential 	(59.3) 	(64.4)
U.S. tax on foreign earnings 	73.1 	70.9
Research and development credit 	(75.1) 	(48.6)
Excess tax benefits related to share-based compensation 	(223.3) 	(107.9)
Share-based compensation not benefited 	32.4 	29.5
Unrecognized tax benefits related to share-based compensation 	5.3 	4.4
Reversal of unrecognized tax benefits 	(29.5) 	(20.9)
Swiss tax benefits, net of valuation allowance 	— 	(92.3)
Deferred tax re-measurement 	— 	(67.1)
Other 	9.5 	(8.4)
Total income tax expense 	$ 	336.3 $ 	141.6
Deferred income taxes reflect tax carryforwards and the net tax effects of temporary differences between the carrying amounts of assets and liabilities
for financial reporting and the amounts used for income tax purposes. Significant components of the Company’s deferred tax assets and liabilities are as
follows (in millions):
December 31,
2025 	2024
Deferred tax assets:
Intangible assets 	$ 	330.2 $ 	377.5
Capitalized research and development expenditures 	562.5 	468.6
Research and development credits 	288.8 	240.3
Share-based compensation expense 	178.4 	155.3
Swiss tax credits 	84.1 	107.4
Expenses deducted in later years for tax purposes 	76.1 	67.4
Lease liabilities 	23.1 	23.0
Other 	9.4 	15.8
Gross deferred tax assets 	1,552.6 	1,455.3
Valuation allowance 	(361.5) 	(314.8)
Deferred tax assets 	1,191.1 	1,140.5
Deferred tax liabilities:
Property, plant, and equipment 	(140.4) 	(65.7)
Right-of-use assets 	(16.9) 	(18.9)
Intangible assets and other 	(15.2) 	(10.8)
Deferred tax liabilities 	(172.5) 	(95.4)
Net deferred tax assets 	$ 	1,018.6 $ 	1,045.1
As of December 31, 2025, the Company had $85.4 million of federal and state net operating loss carryforwards, certain of which will expire starting in
2026 if not utilized. Utilization of these net operating loss carryforwards may be subject to certain limitations. The Company does not expect the limitations
to result in any permanent loss of these tax benefits. As of December 31, 2025, the Company had $84.1 million of Swiss tax credit carryforwards, which
will expire in 2028. As of
121

-- 123 of 187 --

Table of Contents
December 31, 2025, the Company had $395.0 million of California research and development credit carryforwards, which do not expire, and $4.4 million
of other state research and development credit carryforwards, which begin to expire in 2030.
As of December 31, 2025, the Company had a valuation allowance of $361.5 million, primarily related to California deferred tax assets and certain
Swiss deferred tax assets, for which the Company does not believe a tax benefit is more likely than not to be realized. As of December 31, 2024, the
Company had a valuation allowance of $314.8 million, primarily related to California deferred tax assets and Swiss deferred tax assets, for which the
Company does not believe a tax benefit is more likely than not to be realized. The increase in the valuation allowance during 2025 is primarily related to
California research and development credits. These valuation allowances would result in a reduction to the income tax provision in the consolidated
statements of income if they are ultimately not necessary.
The Company intends to repatriate earnings from its Swiss and Dutch subsidiaries and joint venture in Hong Kong, as needed, and the U.S. and foreign
tax implications of such repatriations are not expected to be significant. The Company will continue to indefinitely reinvest earnings from the rest of its
foreign subsidiaries and does not expect the tax implications of repatriating these earnings to be significant.
Income taxes paid, net of refunds, during the periods presented were as follows (in millions):
Year Ended December 31,
2025
Federal 	$ 	348.8
State 	57.0
Switzerland 	67.3
Other foreign 	64.8
Total income taxes paid, net of refunds 	$ 	537.9
A reconciliation of the beginning and ending amounts of gross unrecognized income tax benefits for the years ended December 31, 2025, 2024, and
2023, are as follows (in millions):
Year Ended December 31,
2025 	2024 	2023
Beginning balance 	$ 	310.0 $ 	260.4 $ 	252.6
Increases related to tax positions taken during the current year 	61.4 	67.8 	48.5
Increases related to tax positions taken during a prior year 	2.4 	13.9 	—
Decreases related to tax positions taken during a prior year 	(7.7) 	— 	(18.9)
Decreases related to settlements with tax authorities 	(20.3) 	(3.7) 	(1.0)
Decreases related to expiration of statute of limitations 	(59.7) 	(28.4) 	(20.8)
Ending balance 	$ 	286.1 $ 	310.0 $ 	260.4
As of December 31, 2025, 2024, and 2023, gross interest related to unrecognized tax benefits accrued was $21.8 million, $37.0 million, and $31.2
million, respectively. Total gross unrecognized tax benefits as of December 31, 2025, were $286.1 million, of which $175.3 million, if recognized, would
have an impact on the Company’s effective tax rate.
The Company files federal, state, and foreign income tax returns in many jurisdictions in the U.S. and OUS. Years before 2020 are considered closed
for significant jurisdictions. Certain of the Company’s unrecognized tax benefits could change due to activities of various tax authorities, including
evolving interpretations of existing tax laws in the jurisdictions in which the Company operates, potential assessment of additional tax, possible settlement
of audits, or through normal expiration of various statutes of limitations, which could affect the Company’s effective tax rate in the period in which they
change.
The Company is subject to the examination of its income tax returns by the Internal Revenue Service and other tax authorities. The outcome of these
audits cannot be predicted with certainty. The Company’s management regularly assesses the likelihood of adverse outcomes resulting from these
examinations to determine the adequacy of the Company’s provision for income taxes. If any issues addressed in the Company’s tax audits are resolved in a
manner not consistent with management’s expectations, the Company could be required to adjust its provision for income taxes in the period such
resolution occurs.
122

-- 124 of 187 --

Table of Contents
NOTE 12. NET INCOME PER SHARE
The following table presents the computation of basic and diluted net income per share attributable to Intuitive Surgical, Inc. (in millions, except per
share amounts):
Year Ended December 31,
2025 	2024 	2023
Numerator:
Net income attributable to Intuitive Surgical, Inc. 	$ 	2,856.0 $ 	2,322.6 $ 	1,798.0
Denominator:
Weighted-average shares outstanding used in basic calculation 	356.9 	355.2 	351.2
Add: dilutive effect of potential common shares 	5.8 	6.8 	6.2
Weighted-average shares outstanding used in diluted calculation 	362.7 	362.0 	357.4
Net income per share attributable to Intuitive Surgical, Inc.:
Basic 	$ 	8.00 $ 	6.54 $ 	5.12
Diluted 	$ 	7.87 $ 	6.42 $ 	5.03
Share-based compensation awards of approximately 1.0 million, 0.2 million, and 1.9 million shares for the years ended December 31, 2025, 2024, and
2023, respectively, were outstanding but were not included in the computation of diluted net income per share attributable to Intuitive Surgical, Inc.
common stockholders, because the effect of including such shares would have been anti-dilutive in the periods presented.
NOTE 13. SEGMENT INFORMATION
Intuitive is committed to advancing minimally invasive care through a comprehensive ecosystem of products and services. This connected ecosystem
includes systems, instruments and accessories, learning, and services connected by a digital portfolio that enables actionable digital insights across the care
continuum. The systems, as well as the instruments and accessories, are primarily developed and manufactured by the Company. During the years ended
December 31, 2025, 2024, and 2023, domestic revenue accounted for 68%, 67% and 66%, respectively, of total revenue, while revenue from the
Company’s OUS markets accounted for 32%, 33% and 34%, respectively, of total revenue. The Company manages the business activities on a consolidated
basis and operates in one reportable segment.
The Company’s Chief Executive Officer is the Chief Operating Decision Maker (“CODM”). The CODM utilizes the Company’s long-range plan,
which includes product development roadmaps and long-range financial models, as a key input to resource allocation. The CODM makes decisions on
resource allocation, assesses performance of the business, and monitors budget versus actual results using income from operations. Net income is also a
measure that is considered in monitoring budget versus actual results.
Significant expenses within income from operations, as well as within net income, include cost of revenue, research and development, and selling,
general and administrative expenses, which are each separately presented on the Company’s Consolidated Statements of Income. Other segment items
within net income include interest and other income, net, and income tax expense.
The Company’s long-lived assets consist primarily of property, plant, and equipment, net. As of December 31, 2025 and 2024, 80% and 83%,
respectively, of long-lived assets were in the U.S. As of December 31, 2025 and 2024, no individual country other than the U.S. accounted for 10% or more
of these assets.
NOTE 14. EMPLOYEE BENEFIT PLANS
The Company sponsors various retirement plans for its eligible U.S. and non-U.S. employees. For employees in the U.S., the Company maintains the
Intuitive Surgical, Inc. 401(k) Plan (the “Plan”). As allowed under Section 401(k) of the Internal Revenue Code, the Plan provides tax-deferred salary
contributions for eligible U.S. employees. The Plan allows employees to contribute up to 100% of their annual compensation to the Plan on a pre-tax and/or
after-tax basis. Employee contributions are limited to a maximum annual amount as set periodically by the Internal Revenue Code. The Company matches
200% of employee contributions up to $2,000 per calendar year per person. All matching employer contributions vest immediately.
123

-- 125 of 187 --

Table of Contents
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES
None.
ITEM 9A. CONTROLS AND PROCEDURES
Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures
We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Exchange Act reports is
recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and
communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow for timely decisions
regarding required disclosure.
As required by SEC Rule 13a-15(b), we carried out an evaluation, under the supervision and with the participation of our management, including our
principal executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of
the end of the period covered by this Annual Report on Form 10-K. Based on the foregoing, our principal executive officer and principal financial officer
concluded that our disclosure controls and procedures were effective at the reasonable assurance level.
Inherent Limitations Over Internal Controls
Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the
preparation of the Consolidated Financial Statements for external purposes in accordance with GAAP. Our internal control over financial reporting includes
those policies and procedures that:
(i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;
(ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of the Consolidated Financial Statements in
accordance with GAAP and that our receipts and expenditures are being made only in accordance with authorizations of our management and
directors; and
(iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have
a material effect on the Consolidated Financial Statements.
Management, including our principal executive officer and principal financial officer, does not expect that our internal controls will prevent or detect
all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the
objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of
controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide
absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future
periods are subject to the risk that those internal controls may become inadequate because of changes in business conditions or that the degree of
compliance with the policies or procedures may deteriorate.
Management’s Report on Internal Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in the
Exchange Act Rules 13a-15(f). Under the supervision and with the participation of our management, including our principal executive officer and principal
financial officer, we conducted an assessment of the effectiveness of our internal control over financial reporting based on the framework in Internal
Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on the results of our
assessment under the framework in the Internal Control—Integrated Framework (2013), our management concluded that our internal control over financial
reporting was effective as of December 31, 2025.
The effectiveness of our internal control over financial reporting as of December 31, 2025, has been audited by PricewaterhouseCoopers LLP, an
independent registered public accounting firm, as stated in their report, which is included under “Item 8. Financial Statements and Supplementary Data” of
this Annual Report.
Changes in Internal Control Over Financial Reporting
There were no changes in our internal control over financial reporting that occurred during the quarter ended December 31, 2025, that have materially
affected, or are reasonably likely to materially affect, our internal control over financial reporting.
124

-- 126 of 187 --

Table of Contents
ITEM 9B. OTHER INFORMATION
Rule 10b5-1 Plans
On November 17, 2025, Brian E. Miller, Ph.D., the Company’s Head of Digital and AI Strategy, adopted a Rule 10b5-1 trading plan. Dr. Miller’s
trading plan provides for the potential sale of up to 35,344 shares of the Company’s common stock, including the potential exercise and sale of up to 11,722
shares of the Company’s common stock subject to stock options, until December 15, 2026. This trading plan was entered into during an open insider
trading window and is intended to satisfy the affirmative defense of Rule 10b5-1(c) under the Securities Exchange Act of 1934, as amended, and the
Company’s policies regarding transactions in the Company’s securities.
ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS
Not applicable.
125

-- 127 of 187 --

Table of Contents
PART III
Certain information required by Part III is omitted from this report on Form 10-K and is incorporated herein by reference to our definitive Proxy
Statement for our next Annual Meeting of Stockholders (the “Proxy Statement”), which we intend to file pursuant to Regulation 14A of the Securities
Exchange Act of 1934, as amended, within 120 days after December 31, 2025.
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE
The information required by this item concerning our directors and corporate governance is incorporated by reference to the information set forth in
the section titled “Directors and Corporate Governance” in our Proxy Statement. Information required by this item concerning our executive officers is
incorporated by reference to the information set forth in the section entitled “Executive Officers of the Company” in our Proxy Statement. Information
regarding our Section 16 reporting compliance and code of business conduct and ethics is incorporated by reference to the information set forth in the
section entitled “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” in our Proxy Statement.
We have adopted an insider trading policy governing the purchase, sale, and other dispositions of our securities by our directors, officers, and
employees that we believe is reasonably designed to promote compliance with insider trading laws, rules and regulations, and any applicable listing
standards. A copy of our insider trading policy is filed as Exhibit 19 to this Annual Report.
ITEM 11. EXECUTIVE COMPENSATION
The information required by this item regarding executive compensation is incorporated by reference to the information set forth in the sections titled
“Executive Compensation” and “Compensation for Directors” in our Proxy Statement.
ITEM 12. 	SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER
MATTERS
The information required by this item regarding security ownership of certain beneficial owners and management is incorporated by reference to the
information set forth in the section titled “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” in our
Proxy Statement for the 2026 Annual Meeting of Stockholders to be filed with the SEC within 120 days of December 31, 2025.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE
The information required by this item regarding certain relationships and related transactions and director independence is incorporated by reference to
the information set forth in the sections titled “Certain Relationships and Related Transactions” and “Directors and Corporate Governance” in our Proxy
Statement.
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information required by this item regarding principal accountant fees and services is incorporated by reference to the information set forth in the
section titled “Principal Accountant Fees and Services” in our Proxy Statement.
126

-- 128 of 187 --

Table of Contents
PART IV
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULE
(a) The following documents are filed as part of this Annual Report on Form 10-K.
1) Financial Statements—See Index to Consolidated Financial Statements at Item 8 of this report on Form 10-K.
2) All schedules have been omitted, because they are not applicable, not required under the instructions, or the information requested is set
forth in the Consolidated Financial Statements or related notes thereto.
3) Exhibits
The exhibits filed as part of this report are listed under “Exhibits” at subsection (b) of this Item 15.
(b) Exhibits
127

-- 129 of 187 --

Table of Contents
EXHIBIT INDEX
Incorporated by Reference
Exhibit
Number 	Exhibit Description 	Form 	File No. 	Exhibit 	Filing Date
3.1 	Amended and Restated Certificate of Incorporation of the Company, as
Amended. 	10-Q 	000-30713 	3.1 	7/23/2020
3.2
Amendment to Amended and Restated Certificate of Incorporation of
the Company. 	10-Q 	000-30713 	3.1 	10/20/2021
3.3 	Amended and Restated Bylaws of the Company. 	8-K 	000-30713 	3.1 	2/1/2021
4.1 	Specimen Stock Certificate. 	S-1/A 	333-33016 	4.2 	5/2/2000
4.2 	Description of the Registrant’s Securities Registered Pursuant to Section
12 of the Securities Exchange Act of 1934. 	10-K 	333-33016 	4.2 	2/3/2022
10.1+ 	2000 Non-Employee Directors’ Stock Option Plan. 	S-1 	333-33016 	3/22/2000
10.2+ 	Form of Indemnity Agreement. 	8-K 	000-30713 	10.1 	8/3/2015
10.3+ 	2009 Employment Commencement Incentive Plan, as amended and
restated. 	S-8 	333-203793 	4.2 	5/1/2015
10.4+ 	2000 Employee Stock Purchase Plan, as amended and restated. 	8-K 	000-30713 	10.2 	4/30/2024
10.5+ 	2010 Incentive Award Plan, as amended and restated. 	8-K 	000-30713 	10.1 	5/5/2025
10.6+ 	Severance Plan. 	8-K 	000-30713 	10.1 	12/2/2008
10.7+ 	Form of Amended and Restated Intuitive Surgical, Inc. 2009
Employment Commencement Incentive Plan Stock Option Grant
Notice. 	10-K 	000-30713 	10.9 	2/2/2016
10.9+ 	Form of Amended and Restated Intuitive Surgical, Inc. 2010 Incentive
Award Plan Global Stock Option Grant Notice. 	10-K 	000-30713 	10.9 	2/10/2023
10.10+* 	Form of Amended and Restated Intuitive Surgical, Inc. 2010 Incentive
Award Plan Global Restricted Stock Unit Grant Notice.
10.11+* 	Form of Amended and Restated Intuitive Surgical, Inc. 2010 Incentive
Award Plan Global Performance Stock Unit Grant Notice.
19* 	Intuitive Surgical, Inc. Insider Trading Policy and Guidelines.
21.1* 	Intuitive Surgical, Inc. Subsidiaries.
23.1* 	Consent of Independent Registered Public Accounting Firm.
31.1* 	Certification of Chief Executive Officer pursuant to Section 302 of the
Sarbanes-Oxley Act of 2002.
31.2* 	Certification of Chief Financial Officer pursuant to Section 302 of the
Sarbanes-Oxley Act of 2002.
32.1** 	Certification of Chief Executive Officer pursuant to Section 906 of the
Sarbanes-Oxley Act of 2002.
32.2** 	Certification of Chief Financial Officer pursuant to Section 906 of the
Sarbanes-Oxley Act of 2002.
97.1* 	Clawback Policy (formerly Policy for Recovery of Erroneously
Awarded Compensation, as amended and restated on January 29, 2026).
101* 	The following materials from Intuitive Surgical, Inc.’s Annual Report on
Form 10-K for the year ended December 31, 2025, formatted in Inline
XBRL (Inline Extensible Business Reporting Language):
(i) Consolidated Balance Sheets, (ii) Consolidated Statements of
Income, (iii) Consolidated Statements of Comprehensive Income, (iv)
Consolidated Statements of Stockholders’ Equity, (v) Consolidated
Statements of Cash Flows, and (vi) Notes to Consolidated Financial
Statements, tagged at Level I through IV.
104* 	The cover page from Intuitive Surgical, Inc.’s Annual Report on Form
10-K for the year ended December 31, 2025, formatted in Inline XBRL
and contained in Exhibit 101.
+ Management contract or compensatory plan or arrangement.
* Filed herewith.
** Furnished herewith.
ITEM 16. FORM 10-K SUMMARY
None.
128

-- 130 of 187 --

Table of Contents
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be
signed on its behalf by the undersigned thereunto duly authorized.
INTUITIVE SURGICAL, INC.
Date: 	February 3, 2026 	By: 	/S/ DAVID J. ROSA
David J. Rosa
Chief Executive Officer
Power of Attorney
Each person whose individual signature appears below hereby authorizes and appoints David Rosa and Jamie Samath, and each of them, with full
power of substitution and re-substitution and full power to act without the other, as his or her true and lawful attorney-in-fact and agent to act in his or her
name, place, and stead and to execute in the name and on behalf of each person, individually and in each capacity stated below, and to file any and all
amendments to this annual report on Form 10‑K and to file the same, with all exhibits thereto, and other documents in connection therewith, with the
Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each
and every act and thing, ratifying and confirming all that said attorneys-in-fact and agents or any of them or their or his substitute or substitutes may
lawfully do or cause to be done by virtue thereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of
the Registrant and in the capacities and on the dates indicated.
Signature 	Title 	Date
/S/ DAVID J. ROSA
Chief Executive Officer and Director
(Principal Executive Officer) 	February 3, 2026
David J. Rosa
/S/ JAMIE E. SAMATH Executive Vice President, Chief Financial Officer
(Principal Financial Officer) 	February 3, 2026
Jamie E. Samath
/S/ FREDRIK C. WIDMAN Vice President, Corporate Controller
(Principal Accounting Officer) 	February 3, 2026
Fredrik C. Widman
/S/ GARY S. GUTHART 	Executive Chair of the Board of Directors 	February 3, 2026
Gary S. Guthart, Ph.D.
/S/ CRAIG H. BARRATT 	Lead Independent Director 	February 3, 2026
Craig H. Barratt, Ph.D.
/S/ JOSEPH C. BEERY 	Director 	February 3, 2026
Joseph C. Beery
/S/ LEWIS CHEW 	Director 	February 3, 2026
Lewis Chew
/S/ AMAL M. JOHNSON 	Director 	February 3, 2026
Amal M. Johnson
/S/ SREELAKSHMI KOLLI 	Director 	February 3, 2026
Sreelakshmi Kolli
/S/ AMY L. LADD 	Director 	February 3, 2026
Amy L. Ladd, M.D.
/S/ KEITH R. LEONARD JR. 	Director 	February 3, 2026
Keith R. Leonard Jr.
/S/ JAMI DOVER NACHTSHEIM 	Director 	February 3, 2026
Jami Dover Nachtsheim
/S/ MONICA P. REED 	Director 	February 3, 2026
Monica P. Reed, M.D.
129

-- 131 of 187 --

Exhibit 10.10
AMENDED AND RESTATED
INTUITIVE SURGICAL, INC. 2010 INCENTIVE AWARD PLAN
GLOBAL RESTRICTED STOCK UNIT GRANT NOTICE
Intuitive Surgical, Inc., a Delaware corporation (the “Company”), pursuant to its Amended and Restated 2010 Incentive Award Plan,
as amended from time to time (the “Plan”), hereby grants to the holder listed below (“Participant”) the number of Restricted Stock Units (the
“RSUs”) set forth below. The RSUs are subject to the terms and conditions set forth in this Global Restricted Stock Unit Grant Notice (the
“Grant Notice”) and the Global Restricted Stock Unit Agreement (including any additional terms and conditions for Participant’s country
included in the appendix attached thereto) attached hereto as Exhibit A (the “Agreement”) and the Plan, which are incorporated herein by
reference. Unless otherwise defined herein, the terms defined in the Plan shall have the same defined meanings in the Grant Notice and the
Agreement.
Participant: 	[__________________________]
Grant Number: [_____________]
Grant Date: 	[__________________________]
Vesting Commencement Date: 	[__________________________]
Number of RSUs: 	[_____________]
Type of Shares Issuable: 	Common Stock
Vesting Schedule: 	The RSUs shall vest as shown in the Vest Schedule on the corporate broker’s website,
subject to the Participant’s continued service with the Company through each applicable
vesting date.
By Participant’s signature below, or by indicating acceptance of this award through the Company’s online acceptance procedure
(including online acceptance through a third-party website authorized by the Company), Participant agrees to be bound by the terms and
conditions of the Plan, the Agreement and the Grant Notice. Participant has reviewed the Agreement, the Plan and the Grant Notice in their
entirety, has had an opportunity to obtain the advice of counsel prior to executing or accepting the Grant Notice and fully understands all
provisions of the Grant Notice, the Agreement and the Plan. Participant hereby agrees to accept as binding, conclusive and final all decisions
or interpretations of the Administrator upon any questions arising under the Plan, the Grant Notice or the Agreement.
INTUITIVE SURGICAL, INC.: 	PARTICIPANT
via Online Electronic Acceptance
By:
Title:

-- 132 of 187 --

Exhibit 10.10
EXHIBIT A
TO THE GLOBAL RESTRICTED STOCK UNIT GRANT NOTICE
GLOBAL RESTRICTED STOCK UNIT AGREEMENT
Pursuant to the Grant Notice to which this Agreement is attached, the Company has granted to Participant the number of RSUs set
forth in the Grant Notice (this “Award”).
ARTICLE I.
GENERAL
1.1 	Defined Terms. Capitalized terms not specifically defined herein shall have the meanings specified in the Plan or the Grant
Notice.
1.2 	Incorporation of Terms of Plan. The RSUs and the shares of Common Stock (“Stock”) issued to Participant hereunder
(“Shares”) are subject to the terms and conditions set forth in this Agreement (including any additional terms and conditions for Participant’s
country set forth in the appendix attached hereto (the “Appendix”)) and the Plan, which is incorporated herein by reference. In the event of
any inconsistency between the Plan and this Agreement, the terms of the Plan shall control.
ARTICLE II.
AWARD OF RESTRICTED STOCK UNITS
2.1 	Award of RSUs.
(a) 	Effective as of the grant date set forth in the Grant Notice (the “Grant Date”), the Company has granted to
Participant the number of RSUs set forth in the Grant Notice, upon the terms and conditions set forth in the Grant Notice, the Plan and this
Agreement, subject to adjustment as provided in Section 13.2 of the Plan. Each RSU represents the right to receive one Share or, at the option
of the Company, an amount of cash as set forth in Section 2.3(b), in either case, at the times and subject to the conditions set forth herein.
However, unless and until the RSUs have vested, Participant will have no right to the payment of any Shares subject thereto. Prior to the
actual delivery of any Shares, the RSUs will represent an unsecured obligation of the Company, payable only from the general assets of the
Company.
2.2 	Vesting of RSUs.
(a) 	Subject to Participant’s continued employment with or service to the Company or an Affiliate on each applicable
vesting date and subject to the terms of this Agreement, the RSUs shall vest in such amounts and at such times as are set forth in the Grant
Notice.
(b) 	In the event Participant incurs a Termination of Service, except as may be otherwise provided by the Administrator
or as set forth in the Plan or a written agreement between Participant and the Company, Participant shall immediately forfeit any and all
RSUs granted under this Agreement which have not vested or do not vest on or prior to the date on which such Termination of Service
occurs, and Participant’s rights in any such RSUs which are not so vested shall lapse and expire. For purposes of the RSUs, a Termination of
Service will be deemed to have occurred as of the date Participant is no longer actively providing services to the Company or any Affiliate
(regardless of the reason for such Termination of Service and whether or not later found to be invalid or in breach of applicable laws in the
jurisdiction where Participant is employed or otherwise rendering services, or the terms of Participant’s employment or other service
agreement, if any). Participant’s employment or

-- 133 of 187 --

Exhibit 10.10
service relationship will not be extended by any notice period (e.g., Participant’s period of service will not be extended by any contractual
notice period or period of “garden leave” or similar period mandated under applicable laws in the jurisdiction where Participant is employed
or otherwise rendering services, or the terms of Participant’s employment or other service agreement, if any). Notwithstanding the forgoing,
the Administrator shall have exclusive discretion to determine when a Termination of Service has occurred for purposes of the RSUs
(including when Participant is no longer considered to be providing services while on a leave of absence). In the event of Participant’s leave
of absence, vesting of the RSUs shall be governed by the Company’s leave of absence policies, as may be amended from time to time, and in
accordance with applicable laws.
(c) 	Notwithstanding 2.2(a) hereof and the Grant Notice, but subject to 2.2(b) hereof, vesting of the RSUs is also subject
to acceleration under certain circumstances following a Change of Control (as defined in the Intuitive Surgical, Inc. Severance Plan (the
“Severance Plan”)), in accordance with the terms of the Severance Plan, as may be amended from time to time. The Severance Plan can be
found on the Company’s Infoweb. The terms of the Severance Plan include that the Board has the discretionary authority to amend or
terminate the Severance Plan in any respect by resolution adopted by a two-thirds or greater majority of the Board, unless a Change of
Control has previously occurred. Any changes to the terms of the Severance Plan properly approved by the Board shall be binding on the
RSUs being granted in the Grant Notice.
2.3 	Distribution or Payment of RSUs.
(a) 	Unless otherwise indicated in this Agreement, Participant’s RSUs shall be distributed in Shares (either in book-entry
form or otherwise) or, at the option of the Company, paid in an amount of cash as set forth in Section 2.3(b), in either case, as soon as
administratively practicable following the vesting of the applicable RSU pursuant to Section 2.2, and, in any event, within sixty (60) days
following such vesting. Notwithstanding the foregoing, the Company may delay a distribution or payment in settlement of RSUs if it
reasonably determines that such payment or distribution will violate securities laws or any other applicable law, provided that such
distribution or payment shall be made at the earliest date at which the Company reasonably determines that the making of such distribution or
payment will not cause such violation, as required by Treasury Regulation Section 1.409A-2(b)(7)(ii), and provided further that no payment
or distribution shall be delayed under this Section 2.3(a) if such delay will result in a violation of Section 409A of the Code.
(b) 	In the event that the Company elects to make payment of Participant’s RSUs in cash, the amount of cash payable
with respect to each RSU shall be equal to the Fair Market Value of a Share on the trading day immediately preceding the applicable
distribution or payment date set forth in Section 2.3(a). All distributions made in Shares shall be made by the Company only in the form of
whole Shares. The Company, may, in its sole discretion round any fractional shares up or down to the nearest whole Share or distribute the
fractional Shares in cash in an amount equal to the value of such fractional share determined based on the Fair Market Value as of the trading
day immediately preceding the date of such distribution.
2.4 	Restrictions on Issuance / Compliance with Law. Notwithstanding any other provision in the Plan or this Agreement, unless
there is an available exemption from registration, qualification or other legal requirement applicable to the Shares, the Company shall not be
required to issue any Shares to Participant prior to the completion of any registration or qualification of the Shares under any U.S. or non-
U.S. local, state or federal securities or exchange control law or under rulings or regulations of the U.S. Securities and Exchange Commission
(“SEC”) or of any other governmental body, or prior to

-- 134 of 187 --

Exhibit 10.10
obtaining any approval or other clearance from any U.S. or non-U.S. local, state or federal governmental agency, which registration,
qualification or approval the Company shall, in its absolutely discretion, deem necessary or advisable. Participant understands that the
Company is under no obligation to register or qualify the Shares with the SEC or any state or non-U.S. securities commission or to seek
approval or clearance from any governmental authority for the issuance or sale of the Shares. Further, Participant agrees that the Company
shall have unilateral authority to amend this Agreement without Participant’s consent, to the extent necessary to comply with securities or
other laws applicable to the issuance of Shares.
2.5 	Tax Withholding. Notwithstanding any other provision of this Agreement:
(a) 	Regardless of any action the Company and/or the Affiliate employing or otherwise retaining Participant (the
“Employer”) takes with respect to any or all income tax, social insurance, payroll tax, fringe benefits tax, payment on account or other tax-
related items related to the participation in the Plan and legally applicable to Participant (“Tax-Related Items”), Participant acknowledges that
the ultimate liability for all Tax-Related Items is and remains Participant’s responsibility and may exceed the amount, if any, actually
withheld by the Company or the Employer. Participant further acknowledges that neither the Company nor the Employer (i) make any
representations or undertakings regarding the treatment of any Tax-Related Items in connection with any aspect of the RSUs, including but
not limited to, the grant, vesting or settlement of the RSUs, the subsequent sale of Shares acquired pursuant to such settlement and the receipt
of any dividends; or (ii) commit to or are under any obligation to structure the terms of the grant or any aspect of the RSUs to reduce or
eliminate Participant’s liability for Tax-Related Items or achieve any particular tax result. Further, if Participant is subject to Tax-Related
Items in more than one jurisdiction, Participant acknowledges that the Company and/or the Employer (or former employer, as applicable)
may be required to withhold or account for Tax-Related Items in more than one jurisdiction.
(b) 	Prior to any relevant taxable or tax withholding event, as applicable, Participant agrees to make adequate
arrangements satisfactory to the Company and/or the Employer to satisfy all Tax-Related Items. In this regard, Participant authorizes the
Company and/or the Employer, or their respective agents at their discretion to satisfy their withholding obligations with regard to all Tax-
Related Items by one or a combination of the following:
(i) 	by requiring payment by cash or check made payable to the Company and/or the Affiliate(s) with respect to
which the withholding obligation arises; or
(ii) 	by the deduction of such amount from salary, wages or other compensation payable to Participant;
(iii) 	with respect to any Tax-Related Items arising in connection with the vesting and settlement of the RSUs, by
withholding a net number of vested shares of Stock otherwise issuable pursuant to the RSUs to satisfy the Tax-Related Items;
(iv) 	by withholding from proceeds of the sale of Shares acquired upon vesting/settlement of the RSUs either
through a voluntary sale or through a mandatory sale arranged by the Company (on Participant’s behalf pursuant to this authorization,
without further consent); or
(v) 	in any combination of the foregoing, or any other method determined by the Administrator to be in
compliance with applicable laws.

-- 135 of 187 --

Exhibit 10.10
(c) 	The Company may withhold or account for Tax-Related Items by considering applicable minimum statutory
withholding rates or other withholding rates, including up to and including maximum withholding rates in Participant’s jurisdiction(s). If the
obligation for Tax-Related Items is satisfied by withholding in Shares, for tax purposes, Participant is deemed to have been issued the full
number of Shares subject to the vested RSUs, notwithstanding that a number of the Shares is held back solely for the purpose of paying Tax-
Related Items.
(d) 	Participant agrees to pay to the Company or the Employer any amount of Tax-Related Items that the Company or the
Employer may be required to withhold or account for as a result of Participant’s participation in the Plan that cannot be satisfied by the means
previously described. The Company may refuse to issue and/or deliver Shares or proceeds from the sale of Shares, if Participant fails to
comply with his or her obligations in connection with the Tax-Related Items.
(e) 	In the event any tax withholding obligation arising in connection with the RSUs will be satisfied under
Section 2.5(b)(iv), then the Company may elect to instruct any brokerage firm determined acceptable to the Company for such purpose to sell
on Participant’s behalf (either through a voluntary sale or mandatory sale, without further consent) a whole number of Shares from the vested
Shares then issuable to Participant pursuant to the RSUs as the Company determines to be appropriate to generate cash proceeds sufficient to
satisfy the tax withholding obligation for Tax-Related Items and to remit the proceeds of such sale to the Company or the Affiliate with
respect to which the withholding obligation arises. Participant’s acceptance of this Award constitutes Participant’s instruction and
authorization to the Company and such brokerage firm to complete the transactions described in this Section 2.5(e), including the
transactions described in the previous sentence, as applicable. The Company may refuse to issue any Shares in settlement of the RSUs to
Participant until the foregoing tax withholding obligations are satisfied, provided that no payment shall be delayed under this Section 2.5(e) if
such delay will result in a violation of Section 409A of the Code.
2.6 	Nature of Grant. In accepting this Award, Participant acknowledges, understands and agrees that:
(a) 	the Plan is established voluntarily by the Company, it is discretionary in nature and it may be modified, amended,
suspended or terminated by the Company at any time, to the extent permitted by the Plan;
(b) 	the grant of the RSUs is exceptional, voluntary and occasional and does not create any contractual or other right to
receive future grants of RSUs, or benefits in lieu of RSUs, even if RSUs have been granted in the past;
(c) 	all decisions with respect to future RSUs or other grants, if any, will be at the sole discretion of the Company;
(d) 	Participant is voluntarily participating in the Plan;
(e) 	the RSUs and the Shares subject to the RSUs, and the income from and value of same, are not intended to replace
any pension rights or compensation;
(f) 	the RSUs and the Shares subject to the RSUs, and the income from and value of same are not part of normal or
expected compensation for purposes of, without limitation, calculating any severance, resignation, termination, redundancy, dismissal, end-
of-service payments, holiday pay, bonuses, long-service awards, pension or retirement or welfare benefits or similar mandatory payments;

-- 136 of 187 --

Exhibit 10.10
(g) 	the future value of the underlying Shares is unknown, indeterminable and cannot be predicted with certainty;
(h) 	no claim or entitlement to compensation or damages shall arise from forfeiture of the RSUs resulting from
Participant’s Termination of Service (for any reason whatsoever and whether or not later found to be invalid or in breach of applicable laws
in the jurisdiction where Participant is employed or otherwise rendering services, or the terms of Participant’s employment or other service
agreement, if any);
(i) 	unless otherwise agreed with the Company, the RSUs and the Shares acquired under the Plan, and the income from
and value of same, are not granted as consideration for, or in connection with, any service Participant may provide as a director of any Parent
or Affiliate;
(j) 	unless otherwise provided in the Plan or by the Company in its discretion, the RSUs and the benefits evidenced by
this Agreement do not create any entitlement to have the RSUs or any such benefits transferred to, or assumed by another company, nor to be
exchanged, cashed out or substituted for in connection with any corporate transaction affecting the Stock of the Company; and
(k) 	neither the Company, the Employer nor any other Affiliate shall be liable for any foreign exchange rate fluctuation
between Participant’s local currency and the United States Dollar that may affect the value of the RSUs or of any amounts due to Participant
pursuant to the settlement of the RSUs or the subsequent sale of any Shares acquired upon settlement.
2.7 	Rights as Stockholder. Neither Participant nor any person claiming under or through Participant will have any of the rights or
privileges of a stockholder of the Company in respect of any Shares deliverable hereunder unless and until certificates representing such
Shares (which may be in book-entry form) will have been issued and recorded on the records of the Company or its transfer agents or
registrars, and delivered to Participant (including through electronic delivery to a brokerage account). Except as otherwise provided herein,
after such issuance, recordation and delivery, Participant will have all the rights of a stockholder of the Company with respect to such Shares,
including, without limitation, the right to receipt of dividends and distributions on such Shares.
ARTICLE III.
ARTICLE IV. OTHER PROVISIONS
4.1 	Administration. The Administrator shall have the power to interpret the Plan, the Grant Notice and this Agreement and to
adopt such rules for the administration, interpretation and application of the Plan, the Grant Notice and this Agreement as are consistent
therewith and to interpret, amend or revoke any such rules, in accordance with applicable laws. All actions taken and all interpretations and
determinations made by the Administrator will be final and binding upon Participant, the Company and all other interested persons. To the
extent allowable pursuant to applicable law, no member of the Committee or the Board will be personally liable for any action, determination
or interpretation made with respect to the Plan, the Grant Notice or this Agreement.
4.2 	RSUs Not Transferable. The RSUs shall be subject to the restrictions on transferability set forth in Section 11.3 of the Plan,
subject to the Intuitive Surgical, Inc. Equity Domestic Relations Order Policy, effective July 1, 2014, as may be amended from time to time.
4.3 	Adjustments. To the extent permitted under applicable laws, the Administrator may accelerate the vesting of all or a portion
of the RSUs in such circumstances as it, in its sole discretion, may determine. Participant acknowledges that the RSUs and the Shares subject
to the RSUs are subject

-- 137 of 187 --

Exhibit 10.10
to adjustment, modification and termination in certain events as provided in this Agreement and the Plan, including Section 13.2 of the Plan.
4.4 	Notices. Any notice to be given under the terms of this Agreement to the Company shall be addressed to the Company in
care of the Secretary of the Company at the Company’s principal office, and any notice to be given to Participant shall be addressed to
Participant at Participant’s last address reflected on the Company’s records. By a notice given pursuant to this Section 3.4, either party may
hereafter designate a different address for notices to be given to that party. Any notice shall be deemed duly given when sent via email or
when sent by certified mail (return receipt requested) and deposited (with postage prepaid) in a post office or branch post office regularly
maintained by the United States Postal Service or any equivalent non-U.S. postal service.
4.5 	Titles. Titles are provided herein for convenience only and are not to serve as a basis for interpretation or construction of this
Agreement.
4.6 	No Advice Regarding Grant. The Company is not providing any tax, legal or financial advice, nor is the Company making
any recommendations regarding Participant’s participation in the Plan, or Participant’s acquisition or sale of the underlying Shares.
Participant should consult with his or her own personal tax, legal and financial advisors regarding Participant’s participation in the Plan
before taking any action related to the Plan.
4.7 	Data Privacy. If Participant would like to participate in the Plan, Participant will need to review the information provided
in this Section 3.7 and, where applicable, declare consent to the processing and/or transfer of personal data as described below.
(a) 	EEA+ Controller and Representative. If Participant is based in the European Union, the European Economic
Area or the United Kingdom (collectively “EEA+”), Participant should note that the Company, with its registered address at 1020 Kifer
Road, Sunnyvale, California 94086, United States of America, is the controller responsible for the processing of Participant’s personal
data in connection with the Agreement and the Plan. The Company is represented in the EEA+ by Intuitive Surgical SAS, Cité de la
Photonique, bâtiment Gienah, 11 avenue de Canteranne, 33600 Pessac, France.
(b) 	Data Collection and Usage. The Company collects, uses and otherwise processes certain personal data about
Participant, including but not limited to, Participant’s name, home address and telephone number, email address, date of birth, social
insurance number, passport or other identification number, salary, nationality, job title, any Stock or directorships held in the Company,
details of all RSUs granted under the Plan or other entitlement to Shares awarded, canceled, exercised, vested, unvested or outstanding in
Participant’s favor, which the Company receives from Participant, the Employer or otherwise in connection with this Agreement or the
Plan (“Data”), for the legitimate purposes of implementing, administering and managing the Plan and allocating shares of Stock
pursuant to the Plan.
If Participant is based in the EEA+, the legal basis, where required, for the processing of Data by the Company is the
necessity of the Data processing for the Company’s performance of its obligations under the Plan, and where applicable, the Company’s
legitimate interest of complying with contractual or other statutory obligations to which it is subject.
If Participant is based outside of the EEA+, the Company’s legal basis for the processing of Data is Participant’s consent,
as further described below.

-- 138 of 187 --

Exhibit 10.10
(c) 	Stock Plan Administration Service Providers: The Company transfers Data to E*TRADE Financial Services, Inc.
and certain of its affiliated companies (the “Designated Broker”), an independent service provider based in the United States, which is
assisting the Company with the implementation, administration and management of the Plan. In the future, the Company may select a
different service provider and share Data with such other provider serving in a similar manner. The Designated Broker may open an
account for Participant to receive and trade Shares acquired under the Plan. Participant may be asked to agree on separate terms and
data processing practices with the Designated Broker, with such agreement being a condition to the ability to participate in the Plan.
(d) 	International Data Transfers: The Company and the Designated Broker are based in the United States, which
means that it will be necessary for Data to be transferred to, and processed in, the United States. Participant should note that his or her
country may have enacted data privacy laws that are different from the United States. For example, Participant understands and
acknowledges that the United States is not subject to an unlimited adequacy finding by the European Commission and that Participant’s
Data may not have an equivalent level of protection as compared to Participant’s country of residence.
The onward transfer of Data from the Company to the Designated Broker or, as the case may be, a different service provider of the
Company is based solely on Participant’s consent, as further described below.
If Participant is based outside of the EEA+, Data will be transferred from Participant’s jurisdiction to the Company and
onward from the Company to any of its service providers based on Participant’s consent, as further described below.
(e) 	Data Retention: The Company will hold and use the Data only as long as is necessary to implement, administer
and manage Participant’s participation in the Plan, or as required to comply with legal or regulatory obligations, including under tax,
exchange control, securities and labor laws.
(f) 	Data Subject Rights: Participant may have a number of rights under data privacy laws in Participant’s
jurisdiction. Depending on where Participant is based, such rights may include the right to (i) request access to or copies of Data the
Company processes, (ii) rectify incorrect Data, (iii) delete Data, (iv) restrict the processing of Data, (v) object to the processing of Data for
legitimate interests, (vi) restrict the portability of Data, and/or (vii) lodge complaints with competent authorities in Participant’s
jurisdiction. To receive additional information regarding these rights or to exercise these rights, Participant can contact the Company’s
global privacy officer at data.privacy@intusurg.com.
(g) 	Necessary Disclosure of Personal Data. Participant understands that providing the Company with Data is
necessary for the performance of the Agreement and that Participant’s refusal to provide Data would make it impossible for the Company
to perform its contractual obligations and may affect Participant’s ability to participate in the Plan.
(h) 	Voluntariness and Consequences of Consent Denial or Withdrawal: Participation in the Plan is voluntary and
Participant is providing the consents herein on a voluntary basis. Participant understands that he or she may request to stop the transfer
and processing of the Data for purposes of participation in the Plan and that Participant’s compensation from or
employment relationship with the Employer will not be affected. The only consequence of refusing or

-- 139 of 187 --

Exhibit 10.10
withdrawing consent is that the Company would not be able to allow Participant to participate in the Plan. Participant understands that
the Data will still be processed in relation to his or her employment or service relationship and for record-keeping purposes. For more
information on the consequences of refusal to consent or withdrawal of consent, Participant should contact the Company’s global privacy
officer at data.privacy@intusurg.com.
(i)
Declaration of Consent. If Participant is based in the EEA+, by accepting the RSUs and indicating consent by signing the Grant Notice
or through the Company’s online acceptance procedure, Participant explicitly declares his or her consent to the onward transfer of
Data by the Company to the Designated Broker or, as the case may be, a different service provider of the Company in the U.S. as
described above.
If Participant is based outside of the EEA+, by accepting the RSUs and indicating consent by signing the Grant Notice or through the
Company’s online acceptance procedure, Participant explicitly declares his or her consent to the entirety of the Data processing
operations described above including, without limitation, the onward transfer of Data by the Company to the Designated Broker or, as
the case may be, a different service provider of the Company in the U.S.
4.8 	Governing Law/Venue. The laws of the State of Delaware shall govern the interpretation, validity, administration,
enforcement and performance of the terms of this Agreement regardless of the law that might be applied under principles of conflicts of laws.
For purposes of litigating any dispute that arises directly or indirectly from the relationship of the parties evidenced by this Agreement, the
parties hereby submit to and consent the courts of Santa Clara County, California, or the federal courts for the United States for the Northern
District of California, and no other courts.
4.9 	Conformity to Applicable Law. Participant acknowledges that the Plan, the Grant Notice and this Agreement are intended to
conform to the extent necessary with all applicable laws, including, without limitation, the provisions of the U.S. Securities Act and the
Exchange Act, and any and all regulations and rules promulgated thereunder by the U.S. Securities and Exchange Commission, and any other
laws and regulations. Notwithstanding anything herein to the contrary, the Plan shall be administered, and the RSUs are granted, only in such
a manner as to conform to such applicable law. To the extent permitted by applicable law, the Plan and this Agreement shall be deemed
amended to the extent necessary to conform to applicable law.
4.10 	Amendment, Suspension and Termination. To the extent permitted by the Plan, this Agreement may be wholly or partially
amended or otherwise modified, suspended or terminated at any time or from time to time by the Administrator or the Board, provided that,
except as may otherwise be provided by the Plan, no amendment, modification, suspension or termination of this Agreement shall adversely
affect the RSUs in any material way without the prior written consent of Participant.
4.11 	Successors and Assigns. The Company may assign any of its rights under this Agreement to single or multiple assignees, and
this Agreement shall inure to the benefit of the successors and assigns of the Company. Subject to the restrictions on transfer set forth in
Section 3.2 and the Plan, this Agreement shall be binding upon and inure to the benefit of the heirs, legatees, legal representatives, successors
and assigns of the parties hereto.

-- 140 of 187 --

Exhibit 10.10
4.12 	Limitations Applicable to Section 16 Persons. Notwithstanding any other provision of the Plan or this Agreement, if
Participant is subject to Section 16 of the Exchange Act, the Plan, the RSUs, the Grant Notice and this Agreement shall be subject to any
additional limitations set forth in any applicable exemptive rule under Section 16 of the Exchange Act (including any amendment to Rule
16b-3 of the Exchange Act) that are requirements for the application of such exemptive rule. To the extent permitted by applicable law, this
Agreement shall be deemed amended to the extent necessary to conform to such applicable exemptive rule.
4.13 	Not a Contract of Employment. Nothing in this Agreement or in the Plan shall create an employment or service relationship
with, or confer upon Participant any right to continue to serve as an employee or other service provider of, the Company or any Affiliate, or
shall interfere with or restrict in any way the rights of the Company and its Affiliates, which rights are hereby expressly reserved, to
discharge or terminate the services of Participant at any time for any reason whatsoever, with or without cause, except to the extent expressly
provided otherwise in a written agreement between the Company or an Affiliate and Participant.
4.14 	Entire Agreement. The Plan, the Grant Notice and this Agreement (including the Appendix and any other exhibit hereto)
constitute the entire agreement of the parties and supersede in their entirety all prior undertakings and agreements of the Company and
Participant with respect to the subject matter hereof.
4.15 	Section 409A. This Award is not intended to constitute “nonqualified deferred compensation” within the meaning of Section
409A of the Code (together with any Department of Treasury regulations and other interpretive guidance issued thereunder, including without
limitation any such regulations or other guidance that may be issued after the date hereof, “Section 409A”). However, notwithstanding any
other provision of the Plan, the Grant Notice or this Agreement, if at any time the Administrator determines that this Award (or any portion
thereof) may be subject to Section 409A, the Administrator shall have the right in its sole discretion (without any obligation to do so or to
indemnify Participant or any other person for failure to do so) to adopt such amendments to the Plan, the Grant Notice or this Agreement, or
adopt other policies and procedures (including amendments, policies and procedures with retroactive effect), or take any other actions, as the
Administrator determines are necessary or appropriate for this Award either to be exempt from the application of Section 409A or to comply
with the requirements of Section 409A.
4.16 	Language. Participant acknowledges that Participant is sufficiently proficient in English or has consulted with an advisor
who is sufficiently proficient in English, so as to allow Participant to understand the terms and conditions of this Agreement. If Participant
has received this Agreement or any other document related to the Plan translated into a language other than English and if the meaning of the
translated version is different than the English version, the English version will control.
4.17 	Electronic Delivery and Acceptance. The Company may, in its sole discretion decide to deliver any documents related to
current or future participation in the Plan by electronic means. Participant hereby consents to receive such documents by electronic delivery
and agrees to participate in the Plan through an on-line or electronic system established and maintained by the Company or a third party
designated by the Company.
4.18 	Agreement Severable. In the event that any provision of the Grant Notice or this Agreement is held invalid or unenforceable,
such provision will be severable from, and such invalidity or

-- 141 of 187 --

Exhibit 10.10
unenforceability will not be construed to have any effect on, the remaining provisions of the Grant Notice or this Agreement.
4.19 	Appendix. Notwithstanding any provisions in this Agreement, the RSUs shall be subject to any additional terms and
conditions for Participant’s country set forth in the Appendix attached hereto. Moreover, if Participant relocates to one of the countries
included in the Appendix, the additional terms and conditions for such country, if any, will apply to Participant, to the extent the Company
determines that the application of such terms and conditions is necessary or advisable for legal or administrative reasons. The Appendix
constitutes part of this Agreement.
4.20 	Imposition of Other Requirements. The Company reserves the right to impose other requirements on Participant’s
participation in the Plan, on the RSUs and on any Shares acquired under the Plan, to the extent the Company determines it is necessary or
advisable for legal or administrative reasons, and to require Participant to sign any additional agreements or undertakings that may be
necessary to accomplish the foregoing.
4.21 	Insider Trading Restrictions/Market Abuse Laws. Participant acknowledges that he or she may be subject to insider trading
restrictions and/or market abuse laws in applicable jurisdictions, including but not limited to the United States, Participant’s country, the
broker’s country and the country or countries in which the Stock is listed, which may affect Participant’s ability, directly or indirectly, to
purchase or sell, or attempt to sell or otherwise dispose of Shares, rights to Shares (e.g., RSUs), or rights linked to the value of Shares, during
such times as Participant is considered to have “inside information” regarding the Company (as defined by the laws in the applicable
jurisdiction(s)). Local insider trading laws and regulations prohibit the cancellation or amendment of orders Participant placed before
possessing the inside information. Furthermore, Participant understands that he or she may be prohibited from (i) disclosing the inside
information to any third party, including fellow employees (other than on a “need to know” basis) and (ii) “tipping” third parties by sharing
with them Company insider information, or otherwise causing third parties to buy or sell Company securities. Any restrictions under these
laws or regulations are separate from and in addition to any restrictions that may apply to Participant under any applicable Company insider
trading policy. Participant acknowledges that it is Participant’s responsibility to comply with any applicable restrictions, and Participant
should speak to his or her personal advisor on this matter.
4.22 	Foreign Asset/Account Reporting Requirements. If Participant resides in a country outside the United States, there may be
certain foreign asset and/or account reporting requirements which may affect Participant’s ability to acquire or hold Shares or cash received
from participating in the Plan (including from any dividends paid on Shares) in a brokerage account or bank outside of Participant’s country.
Participant may be required to report such accounts, assets or related transactions to the tax or other authorities in Participant’s country.
Participant may also be required to repatriate sale proceeds or other funds received as a result of participating in the Plan to Participant’s
country within a certain time after receipt. It is Participant’s responsibility to comply with such regulations and Participant should speak to
his or her personal legal advisor on this matter.
4.23 	Limitation on Participant’s Rights. Participation in the Plan confers no rights or interests other than as herein provided. This
Agreement creates only a contractual obligation on the part of the Company as to amounts payable and shall not be construed as creating a
trust. Neither the Plan nor any underlying program, in and of itself, has any assets. Participant shall have only the rights of a general
unsecured creditor of the Company with respect to amounts credited and benefits payable, if any, with respect to the RSUs.

-- 142 of 187 --

Exhibit 10.10
4.24 	Clawback. All Awards and any Shares acquired in respect thereof will be subject to recoupment by the Company to the
extent required to comply with applicable law or any policy of the Company providing for the reimbursement of incentive compensation,
whether or not such policy is in place at the time of grant or payment of the Award.
4.25 	Counterparts. The Grant Notice may be executed in one or more counterparts, including by way of any electronic signature,
subject to applicable law, each of which shall be deemed an original and all of which together shall constitute one instrument.
4.26 	Deemed Acceptance of Agreement for Participants in the United States. In the event Participant works and/or resides in the
United States, unless Participant notifies the Company within ten (10) calendar days following receipt of the Grant Notice and this
Agreement that Participant declines the Award, Participant will be deemed to have accepted and agreed to the terms and conditions of the
Grant Notice, this Agreement and the Plan. Participant acknowledges receipt of a copy of the Plan and represents that Participant is familiar
with the terms and provisions thereof, which are incorporated herein by reference.
4.27 	Waiver. Participant acknowledges that a waiver by the Company of breach of any provision of this Agreement shall not
operate or be construed as a waiver of any other provision of this Agreement, or of any subsequent breach by Participant or any other
Participant.
* * * * *

-- 143 of 187 --

Exhibit 10.10
APPENDIX
TO THE AMENDED AND RESTATED
INTUITIVE SURGICAL, INC. 2010 INCENTIVE AWARD PLAN
GLOBAL RESTRICTED STOCK UNIT AGREEMENT
FOR PARTICIPANTS OUTSIDE OF THE UNITED STATES
Capitalized terms used but not defined herein shall have the meanings ascribed to them in the Global Restricted Stock Unit Agreement (the
“Agreement”) or the Plan.
Terms and Conditions
This Appendix includes additional terms and conditions that govern the Award granted to Participant under the Plan if Participant works
and/or resides in one of the countries listed below. This Appendix forms part of the Agreement.
If Participant is a citizen or resident of a country other than the one in which Participant is currently residing and/or working, transfers
employment and/or residency to another country after the Grant Date, or is considered a resident of another country for local law purposes,
the Company shall, in its discretion, determine to what extent the terms and conditions contained herein shall be applicable to Participant.
Notifications
This Appendix also includes information regarding exchange control and certain other issues which Participant should be award with respect
to participation in the Plan. The information is based on the exchange control, securities and other laws in effect in the respective countries as
of November 2022. Such laws are often complex and change frequently. As a result, the Company strongly recommends that Participant not
rely on the information in this Appendix as the only source of information relating to the consequences of Participant’s participation in the
Plan because the information may be out of date at the time Participant vests in the RSUs and acquires Shares or sells Shares acquired under
the Plan.
In addition, the information is general in nature and may not apply to Participant’s particular situation, and the Company is not in a position
to assure Participant of any particular result. Accordingly, Participant should seek appropriate professional advice as to how the relevant laws
in Participant’s country may apply to his or her personal situation.
Finally, if Participant is a citizen or resident of a country other than the one in which Participant is currently residing and/or working,
transfers employment and/or residency to another country after the Grant Date, or is considered a resident of another country for local law
purposes, the information contained herein may not be applicable to Participant in the same manner.

-- 144 of 187 --

Exhibit 10.10
AUSTRALIA
Notifications
Tax Information. The Plan is a plan to which Subdivision 83A-C of the Income Tax Assessment Act 1997 (Cth) ) (the “Act”) applies
(subject to the conditions in the Act).
Exchange Control Information. Exchange control reporting is required for cash transactions exceeding A$10,000 and international fund
transfers of any amount. The Australian bank assisting with the transaction will file the report for Participant. If there is no Australian bank
involved with the transfer, Participant will have to file the report.
Securities Law Information. The grant of RSUs is being made under Division 1A, Part 7.12 of the Corporations Act 2001 (Cth). If
Participant offers Shares for sale to a person or entity resident in Australia, the offer may be subject to disclosure requirements under
Australian law. Participant should obtain legal advice on applicable disclosure obligations prior to making any such offer.
AUSTRIA
No country-specific provisions apply.
BELGIUM
Notifications
Stock Exchange Tax. A stock exchange tax applies to transactions executed by a Belgian resident through a financial intermediary, such as a
bank or broker. If the transaction is conducted through a Belgian financial intermediary, it may withhold the stock exchange tax, but if the
transaction is conducted through a non-Belgian financial intermediary, the Belgian resident may need to report and pay the stock exchange
tax directly. The stock exchange tax likely will apply when Shares acquired under the Plan are sold. Belgian residents should consult with a
personal tax or financial advisor for additional details on their obligations with respect to the stock exchange tax.
BULGARIA
No country-specific provisions apply.
CANADA
Terms and Conditions
Form of Delivery. The following provision supplements Section 2.3 of the Agreement:
Notwithstanding any discretion contained in the Plan and the Agreement, the RSUs will not be settled in cash or a combination of cash and
Shares. The RSUs will be settled only in Shares.
Nature of Grant. The following provision replaces Section 2.2(b) of the Agreement:
In the event Participant incurs a Termination of Service, except as may be otherwise provided by the Administrator or as set forth in a written
agreement between Participant and the Company, Participant

-- 145 of 187 --

Exhibit 10.10
shall immediately forfeit any and all RSUs granted under this Agreement which have not vested or do not vest on or prior to the date on
which such Termination of Service occurs, and Participant’s rights in any such RSUs which are not so vested shall lapse and expire.
For purposes of the RSUs, Participant’s Termination of Service will be deemed to occur as of the date that is the earlier of (i) the date of
Participant’s termination, (ii) the date Participant receives notice of termination, or (iii) the date Participant is no longer actively providing
services and will not be extended by any notice period (e.g., active service would not include any contractual notice period or any period of
“garden leave” or similar period mandated under Canadian laws or the terms of Participant’s employment or service agreement, if any),
regardless of the reason for such termination and whether or not later found to be invalid or in breach of applicable laws in the jurisdiction
where Participant is employed or providing services or the terms of his or her employment or service agreement, if any; unless otherwise
expressly provided in this Agreement or determined by the Company, Participant’s right to vest in the RSUs under the Plan, if any, will
terminate as of such date; in the event that the date the Participant is no longer actively providing services cannot be reasonably determined
under the terms of this Agreement and the Plan, the Administrator shall have the exclusive discretion to determine when Participant is no
longer actively providing services for purposes of his or her RSUs (including whether Participant may still be considered to be providing
services while on a leave of absence). Notwithstanding the foregoing, if applicable employment legislation explicitly requires continued
vesting during a statutory notice period, Participant’s right to vest in the RSUs, if any, will terminate effective as of the last date of the
minimum statutory notice period, but Participant will not earn or be entitled to pro-rated vesting if the vesting date falls after the end of
Participant’s statutory notice period, nor will Participant be entitled to any compensation for lost vesting.
The following provisions apply to residents of Quebec:
Language Consent. A French translation of the Plan, Grant Notice and the Agreement will be made available to Participant as soon as
reasonably practicable. Participant understands that, from time to time, additional information related to the offering of the Plan might be
provided in English and such information may not be immediately available in French. However, upon request, the Company will translate
into French documents related to the offering of the Plan as soon as reasonably practicable.
Consentement à la Langue Utilisée. Une traduction française du Plan, de l'Avis d'octroi et de la présente Entente sera mise à la disposition
de Participant dès que raisonnablement possible. Participant comprend que, de temps à autre, des informations supplémentaires liées à
l'offre du Plan peuvent être fournies en anglais et que ces informations peuvent ne pas être immédiatement disponibles en français.
Cependant, sur demande, Intuitive Surgical traduira en français les documents relatifs à l'offre du Plan dès que raisonnablement possible
Data Privacy. The following provision supplements Section 3.7 of the Agreement:
Participant authorizes the Company and the Company’s representatives to discuss with and obtain all relevant information from all
personnel, professional or non-professional, involved with the administration of the Plan. Participant further authorizes the Company,
the Employer, any Affiliate, E*TRADE Financial Services, Inc. and any other stock plan service provider as may be selected by the
Company from time to time to assist with the Plan, to disclose and discuss the Plan with their advisors. Participant acknowledges and
agrees that Participant’s personal information, including sensitive personal information, may be transferred or disclosed outside of the
Province of Quebec, including to the United States. Participant also authorizes the Company and the Employer to record such
information and to keep such information in Participant’s employee file. Participant also acknowledges and authorizes the Company, its
Affiliates and other parties involved in the

-- 146 of 187 --

Exhibit 10.10
administration of the Plan to use technology for profiling purposes and to make automated decisions that may have an impact on
Participant or the administration of the Plan.
Notifications
Securities Law Information. The sale of Shares acquired under the Plan may not take place in Canada. This requirement will be satisfied
where the Shares are sold by the designated broker under the Plan through the facilities of the U.S. stock exchange on which the Shares are
currently listed (i.e., the Nasdaq Global Select Market).
CZECH REPUBLIC
No country-specific provisions apply.
FINLAND
No country-specific provisions apply.
FRANCE
Terms and Conditions
RSUs Not Tax-Qualified. The RSUs granted under this Agreement are not intended to qualify for special tax and social security treatment
pursuant to Sections L. 225-197-1 to L. 225-197-5 and Sections L. 22-10-59 to L. 22-10-60 of the French Commercial Code, as amended.
Language Consent. By accepting the RSUs, Participant confirms having read and understood the Plan and Agreement, including all terms
and conditions included therein, which were provided in the English language. Participant accepts the terms of those documents accordingly.
En acceptant ces "RSUs", le Participant confirme avoir lu et compris le Plan et Accord de, incluant tous leurs termes et conditions, qui ont
été transmis en langue anglaise. Le Participant accepte les dispositions de ces documents en connaissance de cause.
GERMANY
No country-specific provisions apply.
HONG KONG
Terms and Conditions
Form of Delivery. The following provision supplements Section 2.3 of the Agreement:
Notwithstanding any discretion contained in the Plan and the Agreement, the RSUs will not be settled in cash or a combination of cash and
Shares. The RSUs will be settled only in Shares.
Restriction on Sale of Shares. Participant agrees not to sell any Shares that are issued to Participant or Participant’s heirs prior to the six-
month anniversary of the Grant Date.

-- 147 of 187 --

Exhibit 10.10
Notifications
Securities Law Information. WARNING: The contents of this document have not been reviewed by any regulatory authority in Hong Kong.
Participant is advised to exercise caution in relation to the grant. If Participant has any questions regarding the contents of this Agreement
or the Plan, Participant should obtain independent professional advice. Neither the grant of the RSUs nor the issuance of Shares upon
vesting of the RSUs constitutes a public offering of securities under Hong Kong law and is available only to eligible employees and other
service providers of the Company, its Parent or Affiliates. This Agreement, the Plan and other incidental communication materials
distributed in connection with the RSUs (i) have not been prepared in accordance with and are not intended to constitute a “prospectus” for
a public offering of securities under the applicable securities legislation in Hong Kong and (ii), are intended only for the personal use of
each eligible employee or other service provider of the Company, its Parent or Affiliates and may not be distributed to any other person.
IRELAND
Notifications
Director Notification Information. If Participant is a director, shadow director or secretary of an Irish Affiliate and has a 1% or more
shareholding interest in the Company, he or she must notify the Irish Affiliate in writing upon receiving or disposing of an interest in the
Company (e.g., RSUs, Shares) or upon becoming aware of the event giving rise to the notification requirement, or upon becoming a director,
shadow director or secretary if such an interest exists at that time. This notification requirement also applies with respect to the interests of a
spouse or minor child (whose interests will be attributed to the director, shadow director or secretary).
ISRAEL
Israeli Sub-Plan. The RSUs are also subject to the Sub-Plan for Israeli Participants (the "Sub-Plan"). The terms used herein shall have the
meaning ascribed to them in the Plan and the Sub-Plan. In the event of any conflict, whether explicit or implied between the provisions of
this Agreement and the Sub-Plan, the provisions set out in the Sub-Plan shall prevail.
Designation. The RSUs are intended to be subject to the Capital Gains Route under Section 102 of the Israeli Income Tax Ordinance [New
Version] - 1961 (the “Ordinance” and the "Capital Gains Route"), subject to compliance with the requirements under Section 102 of the
Ordinance and any rules or regulations thereunder, including the execution of this Agreement and the acknowledgments included below.
However, in the event the RSUs do not meet the requirements of Section 102 of the Ordinance, such RSUs and the underlying Shares shall
not qualify for the favorable tax treatment under the Capital Gains Route.
The Company makes no representations or guarantees that the RSUs will qualify for favorable tax treatment and will not be liable or
responsible if favorable tax treatment is not available under Section 102 of the Ordinance.
The Trustee. The RSUs and the Shares issued upon settlement of such RSUs and/or any additional rights, including without limitation any
right to receive any dividends or any shares received as a result of an adjustment made under the Plan, that may be granted in connection with
the RSUs (the “Additional Rights”) shall be issued to or controlled by the Trustee for the benefit of the Participant under the provisions of the
Capital Gains Route for at least the period stated in Section 102 of the Ordinance and the Income Tax Rules (Tax Benefits in Share Issuance
to Employees) 5763-2003 (the “Rules”). In

-- 148 of 187 --

Exhibit 10.10
accordance with the requirements of Section 102 of the Ordinance and the Capital Gains Route, the Participant shall not sell nor transfer from
the Trustee the Shares or Additional Rights until the end of the required the period of time required under Section 102 of the Ordinance or
any shorter period of time determined by the Israeli The Authority (the “Holding Period”). Notwithstanding the above, if any such sale or
transfer occurs before the end of the required Holding Period, the sanctions under Section 102 of the Ordinance shall apply to and shall be
borne by the Participant.
Any fees associated with any vesting, sale, transfer or any act in relation to the RSUs shall be borne by the Participant and the Trustee and/or
the Company and/or any Subsidiary shall be entitled to withhold or deduct such fees from payments otherwise due to/from the Company or a
Subsidiary or the Trustee.
Taxes. Any and all taxes due in relation to the RSUs and the underlying Shares, including, but not limited to, the grant of the RSUs and/or
the vesting, transfer, waiver, or expiration of RSUs and/or underlying Shares, and/or the sale of underlying Shares, shall be borne solely by
the Participant, and in the event of death, by the Participant’s heirs. The Company, any Subsidiary, the Trustee or anyone on their behalf shall
not be required to bear the aforementioned tax, directly or indirectly, nor shall they be required to gross up such tax in the Participant’s salary
or remuneration. The Company and/or any Subsidiary and/or the Trustee shall withhold taxes according to the requirements under the
applicable laws, rules, and regulations, including withholding taxes at source. Furthermore, the Participant hereby agree to indemnify the
Company and/or any Subsidiary and/or the Trustee and hold them harmless against and from any and all liability for any such tax or interest
or penalty thereon, including without limitation, liabilities relating to the necessity to withhold, or to have withheld, any such tax from any
payment made to him. The Company and/or any Subsidiary and/or the Trustee, to the extent permitted by law, shall have the right to deduct
from any payment otherwise due to the Participant or from proceeds of the sale of the Shares an amount equal to any Taxes required by law
to be withheld with respect to the Shares. The Participant will pay to the Company, any subsidiary or the Trustee any amount of taxes that the
Company or any Subsidiary or the Trustee may be required to withhold with respect to the Shares that cannot be satisfied by the means
previously described. The Company may refuse to deliver the Shares if the Participant fail to comply with his obligations in connection with
the taxes as described in this section.
Additional Covenants and Undertakings. The Participant must sign a consent letter, which will be provided to the Participant separately,
confirming that: (i) The Participant is familiar with and understands the provisions of Section 102 of the Ordinance and any associated rules
or regulations in general, and the tax arrangement under the Capital Gains Route in particular, and agrees to comply with such provisions, as
amended from time to time; (ii) The Participant agrees that the RSUs and the Shares that may be issued in connection with the RSUs will be
held or controlled by a trustee for at least the duration of the Holding Period, as determined in Section 102 of the Ordinance under the Capital
Gains Route; (iii) The Participant agrees to the provisions of the trust deed signed between the Company and/or the Subsidiary and the
Trustee attached hereto; (iv) The Participant acknowledges that releasing of the Shares from trust, or any sale of the Shares prior to the
termination of the Holding Period constitutes a violation of the terms of Section 102 of the Ordinance and agree to bear the relevant
sanctions; (v) The Participant authorizes the Company and/or his/her employer to provide the Trustee with any information required for the
purpose of administrating the grant of the RSUs, including without limitation information about his/her RSUs, income tax rates, salary bank
account, contact details and identification number and any reasonable information required by the Trustee; (vi) The Participant declares that
he/she is a resident of the state of Israel for tax purposes and agree to notify the Company upon any change in the residence address and
acknowledge that if he/she ceases to be an Israeli resident or if his/her engagement with the Company or any Subsidiary is terminated, the
RSUs and underlying Shares shall remain subject to Section 102 of the Ordinance, the trust agreement, the Plan and grant documents; (vii)
The Participant acknowledges, understands and agrees that the RSUs are an extraordinary, one-time benefit granted to the Participant, and
does not create any contractual or other right to receive a future grant of RSUs.

-- 149 of 187 --

Exhibit 10.10
Security Exemption. The Company has obtained an exemption from the requirement to file a prospectus in Israel in respect to the offer of
the RSUs. Copies of the Plan and Form S-8 registration statement for the Plan filed with the U.S. Securities and Exchange Commission are
available, free of charge, upon request from the local human resources department.
ITALY
Terms and Conditions
Plan Document Acknowledgment. By accepting the RSUs, Participant acknowledges that he or she has received a copy of the Plan, the
Grant Notice, the Agreement (including this Appendix) and has reviewed the Plan and the Agreement (including this Appendix) in their
entirety and fully accepts all provisions thereof. Participant further acknowledges that he or she has read and specifically and expressly
approves the Grant Notice and the following provisions of the Agreement: (i) Section 2.1: Award of RSUs; (ii) Section 2.2: Vesting of RSUs;
(iii) Section 2.3: Distribution or Payment of RSUs; (iv) Section 2.4: Restrictions on Issuance / Compliance with Law; (v) Section 2.5: Tax
Withholding; (vi) Section 2.6: Nature of Grant; (vii) Section 2.7: Rights as Stockholder; (viii) Section 3.2: RSUs Not Transferable; (ix)
Section 3.7: Data Privacy Information and Consent; (x) Section 3.8: Governing Law/Venue; (xi) Section 3.10: Amendment, Suspension and
Termination; (xii) Section 3.17: Electronic Delivery and Acceptance; (xiii) Section 3.18: Agreement Severable; (xiv) Section 3.20:
Imposition of Other Requirements; (xv) Section 3.21: Insider Trading Restrictions/Market Abuse Laws; and (xvi) Section 3.26: Waiver.
JAPAN
No country-specific provisions apply.
KOREA
No country-specific provisions apply.
MALAYSIA
Notifications
Director Notification Obligation. If you are a director of an Affiliate in Malaysia, you are subject to certain notification requirements under
the Malaysian Companies Act. Among these requirements is an obligation to notify such Malaysian Affiliate in writing when you receive or
dispose of an interest in the Company or any related company. Such notifications must be made within fourteen (14) days of receiving or
disposing of any interest in the Company or any related company.
MEXICO
Terms and Conditions
No Entitlement for Claims or Compensation. The following section supplements Section 2.6 of the Agreement:
Modification. By accepting the Award, Participant understands and agrees that any modification of the Plan or the Agreement or its
termination shall not constitute a change or impairment of the terms and conditions of employment.

-- 150 of 187 --

Exhibit 10.10
Policy Statement. The Award the Company is making under the Plan is unilateral and discretionary and, therefore, the Company reserves the
absolute right to amend it and discontinue it at any time without any liability.
The Company, with registered offices at 1020 Kifer Road, Sunnyvale, CA 94086, is solely responsible for the administration of the Plan, and
participation in the Plan and the grant of the Award do not, in any way, establish an employment relationship between Participant and the
Company since Participant is participating in the Plan on a wholly commercial basis and the sole employer is a Mexican or other Affiliate,
nor does it establish any rights between Participant and the Employer.
Plan Document Acknowledgment. By accepting the Award, Participant acknowledges that he or she has received copies of the Plan, has
reviewed the Plan, Grant Notice and the Agreement in their entirety, and fully understand and accept all provisions of the Plan, Grant Notice
and the Agreement.
In addition, Participant further acknowledges that he or she has read and specifically and expressly approves the terms and conditions in
Section 2.6 of the Agreement, in which the following is clearly described and established: (i) participation in the Plan does not constitute an
acquired right; (ii) the Plan and participation in the Plan is offered by the Company on a wholly discretionary basis; and (iii) participation in
the Plan is voluntary.
Finally, Participant hereby declares that he or she does not reserve any action or right to bring any claim against the Company for any
compensation or damages as a result of his or her participation in the Plan and therefore grant a full and broad release to the Employer, the
Company and any Affiliate with respect to any claim that may arise under the Plan or the Agreement.
Spanish Translation
Ausencia de derechos de reclamación o compensación: Estas especificaciones complementan la Sección 2.6 del Contrato.
Moficaciones: Al aceptar el Premio, el Participante reconoce y acepta que cualquier modificación al Plan o al Convenio o la terminación
del mismo no significará una modifiación o detrimento en los términos y condiciones de su relación de trabajo.
Establecimiento de la Política. El Premio que la Empresa está haciendo por medio del Plan es unilateral y discesional, por tal motivo, la
Empresa se reserva el derecho de modificarlo o cancelarlo sin responsabilidad alguna hacia Usted.
La Empresa, con domicilio registrado en 1020 Kifer Road, Sunnyvale, Ca, 94086, es la única responsable para la administración de Plan y
que su participación en los Plan y adquisición de acciones no constituye una relación de trabajo entre la Empresa y el Participante, toda vez
que su participación en el Plan es totalmente en base a una relación comercial y que el patrón del Participante es una sociedad Mexicana,
afiliada o no a la Empresa. El Plan no establece derechos entre el Participante y su patrón.

-- 151 of 187 --

Exhibit 10.10
Reconicimiento de los Términos y Condiciones. Al aceptar el Premio, el Participante reconoce que ha recibido una copia del Plan, que ha
revisado el Plan y la Notificación de la Entrega y el Convenio completos y reconoce y aepta todas y cada una de las condicioines del Plan, el
Aviso de Entrega y el Convenio.
Aunado a lo anterior, el Participante reconoce que ha leído y específicamente aprueba los términos y condiciones descritas en el punto 2.6
del Convenio, el cual establece que (i) La participación en el Plan no constituye un derecho adquirido, (ii) El plan y la participación en
dicho Plan son ofrecidos por la Empresa en forma totalmente discrecional; y, que (iii) la participación es voluntaria.
Por último, el Participante declara que no se reserva acción legal ni derecho alguno qué hacer valer en contra de la Empresa por ninguna
compensación o daño derivado de su participación en el Plan; y por tal motivo en este acto otorga a favor de su patrón, la Empresa y
cualquier empresa relacionada, el más amplio finiquito que en derecho corresponda en virtud de cualquier reclamación que pudiera surgir
con motivo del Plan o el Convenio.
NETHERLANDS
No country-specific provisions apply.
NORWAY
No country-specific provisions apply.
PORTUGAL
Terms and Conditions
Language Consent. Participant hereby expressly declares that he or she has full knowledge of the English language and has read, understood
and freely accepted and agreed with the terms and conditions established in the Plan and the Agreement.
Conhecimento da Língua. Pela presente, o Participante declara expressamente que tem pleno conhecimento da língua inglesa e que leu,
compreendeu e livremente aceitou e concordou com os termos e condições estabelecidas no Plano e no Acordo de Atribuição (Award
Agreement em inglés).
SINGAPORE
Terms and Conditions
Restriction on Sale and Transferability. Participant hereby agrees that any Shares acquired under the Plan will not be offered for sale in
Singapore prior to the six-month anniversary of the Grant Date, unless such sale or offer is made pursuant to one or more exemptions under
Part XIII Division (1) Subdivision (4) (other than section 280) of the Securities and Futures Act (Chapter 289, 2006 Ed.) (the “SFA”).
Securities Law Information. The grant of RSUs under the Plan is being made pursuant to the “Qualifying Person” exemption under section
273(1)(f) of the SFA, on which basis it is exempt from the prospectus and registration requirements and is not made with a view to the
underlying Shares being

-- 152 of 187 --

Exhibit 10.10
subsequently offered for sale to any other party. The Plan has not been lodged or registered as a prospectus with the Monetary Authority of
Singapore.
Director Notification Requirement. If Participant is a director (including an alternate, substitute or shadow director) of a Singapore
Affiliate, Participant must notify the Singapore Affiliate in writing of an interest (e.g., RSUs, Shares, etc.) in the Company or any Affiliate
within two business days of (i) acquiring or disposing of such interest, (ii) any change in a previously disclosed interest (e.g., sale of Shares),
or (iii) becoming a director.
SPAIN
Terms and Conditions
Nature of Grant. This provision supplements Section 2.6 of the Agreement:
By accepting the RSUs, Participant consents to participation in the Plan and acknowledges that he or she has received a copy of the Plan.
Participant understands that the Company has unilaterally, gratuitously and discretionally decided to grant RSUs under the Plan to individuals
who may be employees of the Company or of a Parent or Affiliate throughout the world. This decision is a limited decision that is entered
into upon the express assumption and condition that any grant will not bind the Company or any Parent or Affiliate other than as expressly
set forth in the Agreement. Consequently, Participant understands that the RSUs are granted on the assumption and condition that the RSUs
and any Shares acquired under the Plan are not part of any employment or service contract (either with the Company or with any Parent or
Affiliate) and shall not be considered a mandatory benefit or salary for any purpose (including severance compensation) or any other right
whatsoever. Further, Participant understands and agrees that, unless otherwise expressly provided for by the Company or set forth in the Plan
or the Agreement, the RSUs will be cancelled without entitlement to any Shares underlying the RSUs if Participant incurs a Termination of
Service, for any reason, including, but not limited to: resignation, retirement, disciplinary dismissal adjudged to be with cause, disciplinary
dismissal adjudged or recognized to be without good cause (i.e., subject to a “despido improcedente”), material modification of the terms of
employment under Article 41 of the Workers’ Statute, relocation under Article 40 of the Workers’ Statute, Article 50 of the Workers’ Statute,
or under Article 10.3 of Royal Decree 1382/1985.
In addition, Participant understands that this grant would not be made to Participant but for the assumptions and conditions referred to above;
thus, Participant acknowledges and freely accepts that, should any or all of the assumptions be mistaken or should any of the conditions not
be met for any reason, then any grant of, or right to, the RSUs shall be null and void.
Notifications
Securities Law Information. The grant of RSUs described in the Agreement does not qualify under Spanish regulations as a security. No
“offer of securities to the public,” as defined under Spanish law, has taken place or will take place in the Spanish territory in connection with
the grant of the RSUs. The Agreement has not been, nor will it be, registered with the Comisión Nacional del Mercado de Valores, and does
not constitute a public offering or prospectus.
SWEDEN
Terms and Conditions
Tax Withholding. This provision supplements Section 2.5 of the Agreement:

-- 153 of 187 --

Exhibit 10.10
Without limiting the Company’s and the Employer’s authority to satisfy their withholding obligations for Tax-Related Items as set forth in
Section 2.5 of the Agreement, in accepting the RSUs, Participant authorizes the Company and/or the Employer to sell or withhold Shares
otherwise deliverable to Participant upon vesting to satisfy Tax-Related Items, regardless of whether the Company and/or the Employer have
an obligation to withhold such Tax-Related Items.
SWITZERLAND
Notifications
Securities Law Information. Neither the Agreement nor any materials relating to the RSUs (i) constitutes a prospectus according to articles
35 et seq. of the Swiss Federal Act on Financial Services (“FinSA”), (ii) may be publicly distributed or otherwise made publicly available in
Switzerland to any person other than an employee of the Company, or (iii) has been or will be filed with, approved or supervised by any
Swiss reviewing body according to article 51 of FinSA or any Swiss regulatory authority, including the Swiss Financial Market Supervisory
Authority (FINMA).
TAIWAN
Terms and Conditions
Data Privacy. This provision supplements Section 3.7 of the Agreement:
Participant hereby acknowledges that Participant has read and understood the terms regarding the collection, processing and transfer of Data
contained in Section 3.7 of the Agreement and by participating in the Plan, Participant agrees to such terms. In this regard, upon request of
the Company or the Employer, Participant agrees to provide an executed data privacy consent form to the Company or the Employer (or any
other agreements or consents that may be required by the Company or the Employer) that the Company and/or the Employer may deem
necessary to obtain under the data privacy laws in Participant’s country, either now or in the future. Participant understands that Participant
will not be able to participate in the Plan if Participant fails to execute any such consent or agreement.
Notifications
Securities Law Information. The offer of participation in the Plan is available only for employees or service providers of the Company and
any Parent or Affiliate. The offer of participation in the Plan is not a public offer of securities by a Taiwanese company.
UNITED KINGDOM
Terms and Conditions
Tax Withholding. This provision supplements Section 2.5 of the Agreement:
Without limitation to Section 2.5 of the Agreement, Participant hereby agrees that he or she is liable for any Tax-Related Items related to his
or her participation in the Plan and hereby covenants to pay such Tax-Related Items, as and when requested by the Company or (if different)
the Employer or by HM Revenue & Customs (“HMRC”) (or any other tax authority or any other relevant authority). Participant also hereby
agrees to indemnify and keep indemnified the Company and (if different) the Employer

-- 154 of 187 --

Exhibit 10.10
against any Tax-Related Items that they are required to pay or withhold or have paid or will pay to HMRC (or any other tax authority or any
other relevant authority) on Participant’s behalf.
Notwithstanding the foregoing, if Participant is a director or executive officer of the Company (within the meaning of Section 13(k) of the
Exchange Act), Participant understands that the foregoing provision will not apply. Instead, any Tax-Related Items not collected or paid may
constitute a benefit to Participant on which additional income tax and National Insurance Contributions (“NICs”) may be payable. Participant
understands that he or she will be responsible for reporting and paying any income tax due on this additional benefit directly to HMRC under
the self-assessment regime and for paying to the Company and/or the Employer (as appropriate) the amount of any employee NICs due on
this additional benefit, which can be recovered by any means set out in the Agreement.

-- 155 of 187 --

Exhibit 10.11
AMENDED AND RESTATED
INTUITIVE SURGICAL, INC.
2010 INCENTIVE AWARD PLAN
PERFORMANCE STOCK UNIT AWARD GRANT NOTICE
Intuitive Surgical, Inc., a Delaware corporation (the “Company”), pursuant to its Amended and Restated 2010 Incentive
Award Plan, as amended from time to time (the “Plan”), hereby grants to the holder listed below (the “Participant”), an award of
performance stock units (“Performance Stock Units” or “PSUs”). Each vested Performance Stock Unit represents the right to
receive, in accordance with the Performance Stock Unit Award Agreement attached hereto as Exhibit A (the “Agreement”), a
number of shares of Common Stock (each, a “Share”) based on the Company’s achievement of certain performance goals over
the applicable performance period. This award of Performance Stock Units is subject to all of the terms and conditions set forth
herein and in the Agreement and the Plan, each of which are incorporated herein by reference. Unless otherwise defined herein,
the terms defined in the Plan shall have the same defined meanings in this Performance Stock Unit Award Grant Notice (the
“Grant Notice”) and the Agreement.
Grant Number: 	[_____________]
Participant: 	[__________________________]
Grant Date: 	[__________________________]
Target Number of PSUs: 	[_____________]
Maximum Achievement Factor %: 	The PSUs shall have the Maximum Achievement Factor % as provided in Exhibit B.
Vesting Schedule: 	The PSUs shall vest as provided in Exhibit B.
Termination of PSUs: 	Except as set forth in the Agreement, if the Participant experiences a Termination of
Service, all PSUs that have not become vested on or prior to the date of such
Termination of Service will thereupon be automatically forfeited by the Participant
without payment of any consideration therefor. In addition, in the event that the
Operating Margin Achievement Factor and/or the Procedures Achievement Factor
(each, as defined in Exhibit B) as of the applicable Determination Date (as defined in
Exhibit B) is zero, the PSUs eligible to vest based on the applicable Achievement
Factor (as defined in Exhibit B) will thereupon be automatically forfeited by the
Participant without payment of any consideration therefor.
By accepting this Award electronically through the Plan service provider’s online grant acceptance policy, the Participant
agrees to be bound by the terms and conditions of the Plan, the Agreement and this Grant Notice. The Participant has reviewed
the Agreement, the Plan and this Grant Notice in their entirety, has had an opportunity to obtain the advice of counsel prior to
executing this Grant Notice and fully understands all provisions of this Grant Notice, the Agreement
10318731_1

-- 156 of 187 --

and the Plan. The Participant hereby agrees to accept as binding, conclusive and final all decisions or interpretations of the
Administrator upon any questions arising under the Plan, this Grant Notice or the Agreement. In addition, by accepting this
Award electronically through the Plan service provider’s online grant acceptance policy, the Participant also agrees that the
Company, in its sole discretion, may satisfy any withholding obligations in accordance with Section 2.6(b) of the Agreement by
(i) withholding shares of Common Stock otherwise issuable to the Participant upon vesting of the PSUs, (ii) instructing a broker
on the Participant’s behalf to sell shares of Common Stock otherwise issuable to the Participant upon vesting of the PSUs and
submit the proceeds of such sale to the Company, or (iii) using any other method permitted by Section 2.6(b) of the Agreement or
the Plan.
INTUITIVE SURGICAL, INC.: 	PARTICIPANT
via Online Electronic Acceptance
By:
Title:

-- 157 of 187 --

EXHIBIT A
TO PERFORMANCE STOCK UNIT AWARD GRANT NOTICE
PERFORMANCE STOCK UNIT AWARD AGREEMENT
Pursuant to the Performance Stock Unit Award Grant Notice (the “Grant Notice”) to which this Performance Stock Unit
Award Agreement (this “Agreement”) is attached, Intuitive Surgical, Inc., a Delaware corporation (the “Company”), has granted
to the Participant the number of performance stock units (“Performance Stock Units” or “PSUs”) set forth in the Grant Notice
under the Company’s 2010 Incentive Award Plan, as amended from time to time (the “Plan”). Each Performance Stock Unit
represents the right to receive a number of shares of Common Stock (each, a “Share”) based on the Company’s achievement of
certain performance goals. Capitalized terms not specifically defined herein shall have the meanings specified in the Plan and
Grant Notice.
ARTICLE I.
GENERAL
1.1 	Incorporation of Terms of Plan. The PSUs are subject to the terms and conditions of the Plan, which are
incorporated herein by reference. In the event of any inconsistency between the Plan and this Agreement, the terms of the Plan
shall control.
ARTICLE II.
GRANT OF PERFORMANCE STOCK UNITS
2.1 	Grant of PSUs. Pursuant to the Grant Notice and upon the terms and conditions set forth in the Plan and this
Agreement, effective as of the Grant Date set forth in the Grant Notice, the Company hereby grants to the Participant an award of
PSUs under the Plan in consideration of the Participant’s past and/or continued employment with or service to the Company or
any Subsidiaries and for other good and valuable consideration.
2.2 	Unsecured Obligation to PSUs. Each PSU constitutes the right to receive a number of Shares upon vesting, as
determined in accordance with Section 2.3 and 2.6 below. Unless and until the PSUs have vested in the manner set forth in
Article 2 hereof, the Participant will have no right to receive Common Stock under any such PSUs. Prior to actual payment of
any vested PSUs, such PSUs will represent an unsecured obligation of the Company, payable (if at all) only from the general
assets of the Company.
2.3 	Vesting Schedule; Change in Control.
(a) 	Subject to Section 2.5 hereof, the PSUs shall vest and become non-forfeitable with respect to the
applicable portion thereof in accordance with Exhibit B to the Grant Notice and this Section 2.3.
(b) 	Notwithstanding Section 2.3(a), if a Change in Control occurs and Participant has not experienced a
Termination of Service prior to the date of the Change in Control, then a number of PSUs equal to the greater of (i) such number
of PSUs as would vest based on the Operating Margin Achievement Factor and each Procedures Achievement Factor as
A-1

-- 158 of 187 --

determined by the Administrator as of the Change in Control in accordance with Exhibit B; and (ii) the Target Number of PSUs
(such greater number the “Deemed Performance Vested Units”) shall be deemed performance vested upon the Change in Control,
shall be assumed, substituted, replaced or continued by the surviving corporation or successor (or affiliate thereof) and shall vest
on the third anniversary of the Grant Date as long as Participant does not experience a Termination of Service prior to such
anniversary. Notwithstanding the foregoing, all such assumed, substituted, replaced or continued PSUs shall immediately vest if
Participant experiences a Termination of Service within twelve months following the Change in Control due to termination by the
Company without Cause or as a result of an Involuntary Termination (each as defined in the Intuitive Surgical, Inc. Severance
Plan). If a Change in Control occurs, Participant has not experienced a Termination of Service prior to the date of the Change in
Control and the PSUs are not assumed, substituted, replaced or continued by the surviving corporation or successor (or affiliate
thereof) in connection with the Change in Control, then a number of PSUs equal to the Deemed Performance Vested Units shall
immediately fully vest upon the Change in Control.
2.4 	Consideration to the Company. In consideration of the grant of the award of PSUs pursuant hereto, the Participant
agrees to render faithful and efficient services to the Company or any Subsidiary.
2.5 	Forfeiture, Termination and Cancellation.
(a) Subject to Section 2.3(b) and to subsections (b) and (c) below, upon Participant’s Termination of Service
for any or no reason, all Performance Stock Units which have not vested prior to or in connection with such Termination of
Service shall thereupon automatically be forfeited, terminated and cancelled as of the applicable date of the Termination of
Service without payment of any consideration by the Company, and the Participant, or the Participant’s beneficiary or personal
representative, as the case may be, shall have no further rights hereunder.
(b) Upon Participant’s Termination of Service (i) by the Company without Cause after the first anniversary of
the Vesting Schedule Commencement Date or (ii) due to Participant’s death, the following number of PSUs shall accelerate and
become immediately vested: the number of PSUs equal to the product of (A) the Target Number of PSUs and (B) a fraction, the
numerator of which is the number of days from the Vesting Schedule Commencement Date until the date of Termination of
Service and the denominator of which is 1,095.
(c) No portion of the PSUs which has not become vested as of the date on which the Participant incurs a
Termination of Service, after giving effect to any acceleration of vesting in connection with such Termination of Service, shall
thereafter become vested.
(d) Notwithstanding anything herein to the contrary, in the event that the Operating Margin Achievement
Factor and/or the Procedures Achievement Factor as of the applicable Determination Date is zero, the PSUs eligible to vest
based on the applicable Achievement Factor will thereupon be automatically forfeited by the Participant without
A-2

-- 159 of 187 --

payment of any consideration therefor, and the Participant, or the Participant’s beneficiary or personal representative, as the
case may be, shall have no further rights hereunder.
2.6 	Settlement Upon Vesting.
(a) 	As soon as administratively practicable following the vesting of any Performance Stock Units pursuant to
Section 2.3 hereof, but in no event later than March 15 of the calendar year following the year in which the Vesting Date (as
defined in Exhibit B) occurs (for the avoidance of doubt, this deadline is intended to comply with the “short term deferral”
exemption from Section 409A of the Code), the Company shall deliver to the Participant (or any transferee permitted under
Section 3.2 hereof) a number of Shares equal to the number of vested PSUs as determined in accordance with Exhibit B.
Notwithstanding the foregoing, in the event Shares cannot be issued pursuant to Section 11.4 of the Plan, the Shares shall be
issued pursuant to the preceding sentence as soon as administratively practicable after the Administrator determines that Shares
can again be issued in accordance with such Section.
(b) 	As set forth in Section 11.2 of the Plan, the Company shall have the authority and the right to deduct or
withhold, or to require the Participant to remit to the Company, an amount sufficient to satisfy all applicable federal, state, local
and foreign income and payroll taxes required by law to be withheld with respect to any taxable event arising in connection with
the Performance Stock Units based on the minimum statutory withholding rates applicable to supplemental taxable income. The
Company shall not be obligated to deliver any Shares to the Participant or the Participant’s legal representative unless and until
the Participant or the Participant’s legal representative shall have paid or otherwise satisfied in full the amount of all federal,
state, local and foreign taxes applicable to the taxable income of the Participant resulting from the grant or vesting of the
Performance Stock Units or the issuance of Shares.
2.7 	Conditions to Delivery of Shares. The Shares deliverable hereunder may be either previously authorized but
unissued Shares, treasury Shares or issued Shares which have then been reacquired by the Company. Such Shares shall be fully
paid and nonassessable. The Company shall not be required to issue Shares deliverable hereunder prior to fulfillment of the
conditions set forth in Section 10.4 of the Plan.
2.8 	Rights as Stockholder. The holder of the PSUs shall not be, nor have any of the rights or privileges of, a
stockholder of the Company, including, without limitation, voting rights and rights to dividends, in respect of the PSUs and any
Shares underlying the PSUs and deliverable hereunder unless and until such Shares shall have been issued by the Company and
held of record by such holder (as evidenced by the appropriate entry on the books of the Company or of a duly authorized
transfer agent of the Company). No adjustment shall be made for a dividend or other right for which the record date is prior to the
date the Shares are issued, except as provided in Section 13.2 of the Plan.
ARTICLE III.
OTHER PROVISIONS
3.1 	Administration. The Administrator shall have the power to interpret the Plan and this Agreement and to adopt such
rules for the administration, interpretation and application of
A-3

-- 160 of 187 --

the Plan as are consistent therewith and to interpret, amend or revoke any such rules. All actions taken and all interpretations and
determinations made by the Administrator in good faith shall be final and binding upon the Participant, the Company and all
other interested persons. No member of the Administrator or the Board shall be personally liable for any action, determination or
interpretation made in good faith with respect to the Plan, this Agreement or the PSUs.
3.2 	PSUs Not Transferable. The PSUs shall be subject to the restrictions on transferability set forth in Section 11.3 of
the Plan.
3.3 	Tax Consultation. The Participant represents that the Company has not provided the Participant with any tax
advice in connection with the PSUs and that the Participant is not relying on the Company for any tax advice in connection with
the PSUs.
3.4 	Binding Agreement. Subject to the limitation on the transferability of the PSUs contained herein, this Agreement
will be binding upon and inure to the benefit of the heirs, legatees, legal representatives, successors and assigns of the parties
hereto.
3.5 	Adjustments Upon Specified Events. The Participant acknowledges that the PSUs are subject to adjustment,
modification and termination in certain events as provided in this Agreement and Section 12.2 of the Plan.
3.6 	Notices. Any notice to be given under the terms of this Agreement to the Company shall be addressed to the
Company in care of the Secretary of the Company at the Company’s principal office, and any notice to be given to the Participant
shall be addressed to the Participant at the Participant’s last address reflected on the Company’s records. By a notice given
pursuant to this Section 3.6, either party may hereafter designate a different address for notices to be given to that party. Any
notice shall be deemed duly given when sent via email or when sent by certified mail (return receipt requested) and deposited
(with postage prepaid) in a post office or branch post office regularly maintained by the United States Postal Service.
3.7 	Participant’s Representations. If the Shares issuable hereunder have not been registered under the Securities Act or
any applicable state laws on an effective registration statement at the time of such issuance, the Participant shall, if required by
the Company, concurrently with such issuance, make such written representations as are deemed necessary or appropriate by the
Company and/or its counsel.
3.8 	Titles. Titles are provided herein for convenience only and are not to serve as a basis for interpretation or
construction of this Agreement.
3.9 	Governing Law. The laws of the State of Delaware shall govern the interpretation, validity, administration,
enforcement and performance of the terms of this Agreement regardless of the law that might be applied under principles of
conflicts of laws.
3.10 Conformity to Securities Laws. The Participant acknowledges that the Plan and this Agreement are intended to
conform to the extent necessary with all provisions of the Securities Act and the Exchange Act and any other Applicable Law.
Notwithstanding anything
A-4

-- 161 of 187 --

herein to the contrary, the Plan shall be administered, and the PSUs are granted, only in such a manner as to conform to
Applicable Law. To the extent permitted by Applicable Law, the Plan and this Agreement shall be deemed amended to the extent
necessary to conform to such Applicable Law.
3.11 Amendment, Suspension and Termination. To the extent permitted by the Plan, this Agreement may be wholly or
partially amended or otherwise modified, suspended or terminated at any time or from time to time by the Administrator or the
Board; provided, however, that, except as may otherwise be provided by the Plan, no amendment, modification, suspension or
termination of this Agreement shall adversely affect the PSUs in any material way without the prior written consent of the
Participant.
3.12 Successors and Assigns. The Company may assign any of its rights under this Agreement to single or multiple
assignees, and this Agreement shall inure to the benefit of the successors and assigns of the Company. Subject to the restrictions
on transfer herein set forth in Section 3.2 hereof, this Agreement shall be binding upon the Participant and his or her heirs,
executors, administrators, successors and assigns.
3.13 Limitations Applicable to Section 16 Persons. Notwithstanding any other provision of the Plan or this Agreement,
if the Participant is subject to Section 16 of the Exchange Act, then the Plan, the PSUs and this Agreement shall be subject to any
additional limitations set forth in any applicable exemptive rule under Section 16 of the Exchange Act (including any amendment
to Rule 16b-3 of the Exchange Act) that are requirements for the application of such exemptive rule. To the extent permitted by
Applicable Law, this Agreement shall be deemed amended to the extent necessary to conform to such applicable exemptive rule.
3.14 Not a Contract of Service Relationship. Nothing in this Agreement or in the Plan shall confer upon Participant any
right to continue to serve as an employee or other service provider of the Company or any of its Subsidiaries or interfere with or
restrict in any way with the right of the Company or any of its Subsidiaries, which rights are hereby expressly reserved, to
discharge or to terminate for any reason whatsoever, with or without cause, the services of the Participant’s at any time.
3.15 Section 409A. This Award is not intended to constitute “nonqualified deferred compensation” within the meaning
of Section 409A of the Code (together with any Department of Treasury regulations and other interpretive guidance issued
thereunder, including without limitation any such regulations or other guidance that may be issued after the date hereof, “Section
409A”). However, notwithstanding any other provision of the Plan, the Grant Notice or this Agreement, if at any time the
Administrator determines that this Award (or any portion thereof) may be subject to Section 409A, the Administrator shall have
the right in its sole discretion (without any obligation to do so or to indemnify Participant or any other person for failure to do so)
to adopt such amendments to the Plan, the Grant Notice or this Agreement, or adopt other policies and procedures (including
amendments, policies and procedures with retroactive effect), or take any other actions, as the Administrator determines are
necessary or appropriate for this Award either to be exempt from the application of Section 409A or to comply with the
requirements of Section 409A.
A-5

-- 162 of 187 --

3.16 Limitation on Participant’s Rights. Participation in the Plan confers no rights or interests other than as herein
provided. This Agreement creates only a contractual obligation on the part of the Company as to amounts payable and shall not
be construed as creating a trust. Neither the Plan nor any underlying program, in and of itself, has any assets. The Participant
shall have only the rights of a general unsecured creditor of the Company and its Subsidiaries with respect to amounts credited
and benefits payable, if any, with respect to the PSUs, and rights no greater than the right to receive the Common Stock as a
general unsecured creditor with respect to PSUs, as and when payable hereunder.
3.17 Data Privacy. If Participant would like to participate in the Plan, Participant will need to review the information
provided in this Section 3.17 and, where applicable, declare consent to the processing and/or transfer of personal data as
described below.
(a) EEA+ Controller and Representative. If Participant is based in the European Union, the European
Economic Area or the United Kingdom (collectively “EEA+”), Participant should note that the Company, with its registered
address at 1020 Kifer Road, Sunnyvale, California 94086, United States of America, is the controller responsible for the
processing of Participant’s personal data in connection with the Agreement and the Plan. The Company is represented in
the EEA+ by Intuitive Surgical SAS, Cité de la Photonique, bâtiment Gienah, 11 avenue de Canteranne, 33600 Pessac,
France.
(b) Data Collection and Usage. The Company collects, uses and otherwise processes certain personal data
about Participant, including but not limited to, Participant’s name, home address and telephone number, email address, date
of birth, social insurance number, passport or other identification number, salary, nationality, job title, any Stock or
directorships held in the Company, details of all PSUs granted under the Plan or other entitlement to Shares awarded,
canceled, exercised, vested, unvested or outstanding in Participant’s favor, which the Company receives from Participant,
the Employer or otherwise in connection with this Agreement or the Plan (“Data”), for the legitimate purposes of
implementing, administering and managing the Plan and allocating shares of Stock pursuant to the Plan.
(c) If Participant is based in the EEA+, the legal basis, where required, for the processing of Data by the
Company is the necessity of the Data processing for the Company’s performance of its obligations under the Plan, and where
applicable, the Company’s legitimate interest of complying with contractual or other statutory obligations to which it is
subject.
3.18 	If Participant is based outside of the EEA+, the Company’s legal basis for the processing of Data is
Participant’s consent, as further described below.
(a) Stock Plan Administration Service Providers: The Company transfers Data to E*TRADE Financial
Services, Inc. and certain of its affiliated companies (the “Designated Broker”), an independent service provider based in
the United States, which is assisting the Company with the implementation, administration and management of the
A-6

-- 163 of 187 --

Plan. In the future, the Company may select a different service provider and share Data with such other provider serving in
a similar manner. The Designated Broker may open an account for Participant to receive and trade Shares acquired under
the Plan. Participant may be asked to agree on separate terms and data processing practices with the Designated Broker,
with such agreement being a condition to the ability to participate in the Plan.
(b) International Data Transfers: The Company and the Designated Broker are based in the United States,
which means that it will be necessary for Data to be transferred to, and processed in, the United States. Participant should
note that his or her country may have enacted data privacy laws that are different from the United States. For example,
Participant understands and acknowledges that the United States is not subject to an unlimited adequacy finding by the
European Commission and that Participant’s Data may not have an equivalent level of protection as compared to
Participant’s country of residence.
3.19 The onward transfer of Data from the Company to the Designated Broker or, as the case may be, a different
service provider of the Company is based solely on Participant’s consent, as further described below.
(a) If Participant is based outside of the EEA+, Data will be transferred from Participant’s jurisdiction to
the Company and onward from the Company to any of its service providers based on Participant’s consent, as further
described below.
(b) Data Retention: The Company will hold and use the Data only as long as is necessary to implement,
administer and manage Participant’s participation in the Plan, or as required to comply with legal or regulatory obligations,
including under tax, exchange control, securities and labor laws.
(c) Data Subject Rights: Participant may have a number of rights under data privacy laws in Participant’s
jurisdiction. Depending on where Participant is based, such rights may include the right to (i) request access to or copies of
Data the Company processes, (ii) rectify incorrect Data, (iii) delete Data, (iv) restrict the processing of Data, (v) object to the
processing of Data for legitimate interests, (vi) restrict the portability of Data, and/or (vii) lodge complaints with competent
authorities in Participant’s jurisdiction. To receive additional information regarding these rights or to exercise these rights,
Participant can contact the Company’s global privacy officer at data.privacy@intusurg.com.
(d) Necessary Disclosure of Personal Data. Participant understands that providing the Company with Data
is necessary for the performance of the Agreement and that Participant’s refusal to provide Data would make it impossible
for the Company to perform its contractual obligations and may affect Participant’s ability to participate in the Plan.
(e) Voluntariness and Consequences of Consent Denial or Withdrawal: Participation in the Plan is
voluntary and Participant is providing the consents herein on a voluntary basis. Participant understands that he or she may
request to stop the transfer and
A-7

-- 164 of 187 --

processing of the Data for purposes of participation in the Plan and that Participant’s compensation from or employment
relationship with the Employer will not be affected. The only consequence of refusing or withdrawing consent is that the
Company would not be able to allow Participant to participate in the Plan. Participant understands that the Data will still be
processed in relation to his or her employment or service relationship and for record-keeping purposes. For more
information on the consequences of refusal to consent or withdrawal of consent, Participant should contact the Company’s
global privacy officer at data.privacy@intusurg.com.
3.20 Declaration of Consent. If Participant is based in the EEA+, by accepting the PSUs and indicating consent by
signing the Grant Notice or through the Company’s online acceptance procedure, Participant explicitly declares his or her
consent to the onward transfer of Data by the Company to the Designated Broker or, as the case may be, a different service
provider of the Company in the U.S. as described above.
3.21 If Participant is based outside of the EEA+, by accepting the PSUs and indicating consent by signing the Grant
Notice or through the Company’s online acceptance procedure, Participant explicitly declares his or her consent to the
entirety of the Data processing operations described above including, without limitation, the onward transfer of Data by the
Company to the Designated Broker or, as the case may be, a different service provider of the Company in the U.S.
3.22 Clawback. All awards will be subject to recoupment by the Company to the extent required to comply with
applicable law or any policy of the Company providing for the reimbursement of incentive compensation, whether or not such
policy is in place at the time of grant or payment of the award.
3.23 Foreign Asset/Account Reporting Notification. The Participant understands that the Participant’s country may
have certain exchange control and/or foreign asset/account reporting requirements which may affect the Participant’s ability to
hold Shares received from the PSUs in a brokerage or bank account outside of the Participant’s country. The Participant may be
required to report such accounts, assets or transactions to the tax or other authorities in the Participant’s country. The Participant
acknowledges that it is the Participant’s responsibility to comply with any applicable regulations, and the Participant should
speak to the Participant’s personal advisor on this matter.
3.24 Additional Acknowledgement. The Participant acknowledges that for employment law purposes outside the
United States, the PSUs and the income from and value of same are not part of normal or expected compensation or salary for
any purpose, including but not limited to for purposes of calculating any severance, resignation, termination, redundancy,
dismissal, end of service payments, bonuses, holiday pay, long-service awards, pension or retirement benefits or similar
mandatory payments.
A-8

-- 165 of 187 --

Exhibit 19
INTUITIVE SURGICAL, INC.
INSIDER TRADING POLICY AND GUIDELINES
As Amended and Restated on January 29, 2026.
Purpose
This Insider Trading Policy and Guidelines (the “Policy”) summarizes the insider trading rules and explains how Insiders may
engage in Securities Transactions, so they are in compliance with the laws prohibiting insider trading. This Policy also described
the consequences of violating insider trading laws.
Scope
This Policy applies to all Insiders of the Company.
Policy
Definitions “Company” means Intuitive Surgical, Inc. and is inclusive of its subsidiaries and affiliates.
“Insiders” means:
• employees of the Company;
• members of the Board of Directors;
• certain specified consultants and contractors of the Company, as identified by the Trading
Compliance Officer from time to time (“Insider Consultants”);
• spouses, domestic partners, dependents and members of the household of employees, members
of the Board of Directors, and Insider Consultants; and
• anyone whose Restricted Transactions are directed or influenced by employees of the Company,
members of the Board of Directors, or Insider Consultants.
“Material Non-Public Information” means any information, favorable, non-favorable or otherwise, that a
reasonable investor would consider important in making a decision to evaluate, purchase, hold or sell the
securities of a Restricted Company and which has not been publicly disclosed by the Restricted
Company. Some examples of material information can include:
• projections of future earnings or losses;
• news of a pending or proposed merger, acquisition, joint venture or tender offer;
• news of a significant sale or purchase of assets, including shares of a subsidiary;
• changes in dividend policies, adoption or termination of new share repurchase programs, the
declaration of a stock split or the offering of additional securities;
• changes in, or initiation of, material litigation matters;
• changes in management or the Board of Directors;
• significant milestone achievements or non-achievements;
• significant new products or discoveries or delays in significant new product introduction or
development;
1

-- 166 of 187 --

• significant information relating to product safety;
• significant developments with respect to licenses, contracts or intellectual property matters;
• significant regulatory actions concerning products or potential products;
• potential bankruptcy or financial liquidity problems;
• the gain or loss of a substantial customer, supplier, collaborator or partner;
• discoveries, or grants or allowances or disallowances of patents;
• plans to raise additional capital through sales of equity or debt or otherwise;
• results of product trials; and
• any other important information, which could reasonably affect the price of any publicly traded
securities of the Restricted Companies.
The above list is not exhaustive but provides examples, and in some cases such information may not
necessarily be material. Every situation should be carefully evaluated on its own merits.
If an Insider is uncertain as to whether information is Material Non-Public Information, such Insider should
address his/her questions with the Trading Compliance Officer before entering into a Restricted
Transaction.
“Restricted Companies” include the Company, as well as all significant collaborators, customers,
partners, suppliers, competitors and other companies about which Insiders may learn confidential
information during the course of performing their duties for the Company.
“Restricted Transactions” include all Securities Transactions in the Restricted Companies, with the
exception that neither (i) the cash-only exercise of stock options and holding of the underlying stock, nor
(ii) purchase and hold of securities pursuant to the Company’s ESPP program, constitute a Restricted
Transaction.
“Securities Transactions” include any purchase, sale or any other exchange of any kind in common
stock, stock options for common stock and any other securities, such as sales of shares from the ESPP,
as well as derivative securities, such as exchange-traded options; provided, that Securities Transactions
shall not include the vesting or settlement of restricted stock units (“RSUs”) or performance stock units
(“PSUs”).
“Trading Day” means a day when the Nasdaq Stock Market is open for trading.
“Trading Window” or “Open Window Period” means the period of time during which Insiders may enter
into Securities Transactions in securities of the Restricted Companies. All Insiders are subject to
mandatory controls on the timing of purchases and sales of securities of the Company. Such transactions
(other than purchases under the Company’s ESPP and a cash-only exercise of options) may only occur
during four quarterly Open Window Periods (subject to applicable cooling off periods), which follow the
publication of the Company’s financial results. The trading window opens on the third trading day after the
Company’s quarterly earnings release. The trading window will close at market close on the 15 day in
the last month of each quarter.
Overview The Company encourages ownership of its common stock and other securities by Insiders. However, it is the
policy of the Company to prohibit the unauthorized disclosure of any Material
th
2

-- 167 of 187 --

Non-Public Information acquired in the workplace and the misuse of Material Non-Public Information in
securities trading.
Requirements The requirements related to this Policy are identified below:
1.0 Prohibited Transactions
1.1 No Insider Trading. No Insider shall engage in any Securities Transaction, including any offer
to enter into a Securities Transaction, during any period beginning with the date that he or she
possesses Material Non-Public Information concerning the Restricted Companies and ending
after the release of the Material Non-Public Information to the public or when the information is
no longer material.
1.2 No Tipping. No Insider shall disclose (“tip”) any Material Non-Public Information about the
Restricted Companies to another person in breach of a duty of trust or confidence. Nor shall
any Insider or related person make recommendations or express opinions on the basis of
Material Non-Public Information as to trading in the Restricted Company’s securities.
1.3 Other Prohibited Transactions. Insiders may not engage, at any time regardless of whether
or not they are in possession of Material Non-Public Information, in any of the following
activities with respect to securities of the Company:
1.1.1 Trading in Securities on a Short-Term Basis. Securities of the Company should be
held for a minimum of six months by officers (“Officers”) as defined by Rule 16a-1(f)
under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and
Directors when purchased in the open market. The short-swing profit rule of the
Securities and Exchange Commission (the “SEC”) penalizes Officers and Directors
who purchase or sell any securities of the Company within six-months of a sale or
purchase, as applicable (also known as a non-exempt purchase). Purchases of
securities of the Company upon exercise of stock options or under the Company’s
Employee Stock Purchase Plan (“ESPP”) are exempt from this rule.
1.1.2 Purchases of Securities of the Company on Margin. Borrowing from a brokerage
firm, bank or other entity in order to purchase securities of the Company (other than
in connection with a so-called “cashless” exercise of options under the Company’s
equity incentive plans) is prohibited.
1.1.3 Pledging Securities of the Company to Secure Margin or Other Loans. Pledging
securities of the Company as collateral to secure loans is prohibited. This prohibition
means, among other things, that the Company does not permit Insiders to hold
securities of the Company in a “margin” account, which would allow the Insider to
borrow against their holdings to buy securities.
1.1.4 Short Sales of Securities of the Company. Selling securities of the Company that
an Insider does not currently own in the expectation that the price of the security will
fall, or as part of a hedge or arbitrage transaction is prohibited.
3

-- 168 of 187 --

1.1.5 Derivative or Hedging Transactions Related to Restricted Companies. Buying or
selling put or call options on securities of the Restricted Companies, or entering into
other derivative contracts or hedging transactions is prohibited. This includes options
trading on any of the stock exchanges or futures exchanges, as well as customized
derivative or hedging transactions with third parties.
1.1.6 Director and Officer Cashless Exercises. The Company will not arrange with
brokers to administer cashless exercises on behalf of Directors and Officers of the
Company. Directors and Officers of the Company may only utilize the cashless
exercise feature of their options if (i) the Director or Officer retains a broker
independently of the Company, (ii) the Company’s involvement is limited to confirming
that it will deliver the stock promptly upon payment of the exercise price and (iii) the
Director or Officer uses a “T+2” or “T+1” cashless exercise arrangement, in which the
Company agrees to deliver stock against the payment of the purchase price on the
same day the sale of the stock underlying the option settles. Under a T+2 or T+1
cashless exercise, a stockbroker, the issuer, and the transfer agent of the issuer work
together to make all transactions settle simultaneously. Any Insider who has any
questions about cashless exercises may obtain additional guidance from the Trading
Compliance Officer.
1.4 Trading Window. Restricted Transactions outside of the Trading Window are prohibited.
Even during Open Window Periods, trading is not permitted when Insiders are in possession of
Material Non-Public Information or material developments are anticipated. Thus, the Open
Window periods are merely times when trading will be permitted absent other factors. The
Trading Compliance Officer may shorten the Open Window Period (or eliminate one or more
Open Window Periods in their entirety) at his or her discretion. Please note that sales of shares
acquired under the ESPP, upon the vesting and settlement of RSUs and PSUs or upon the
exercise of stock options, are covered by the trading window policy.
If an Officer or Director of the Company ends service as an employee, consultant or director for
any reason, Trading Windows will continue to apply to the Officer or Director in its entirety for a
period of 90 days immediately following the termination date, and Officers and Directors
remain subject to Section 16 reporting with respect to any “matching” transactions under
Section 16(b) of the Exchange Act.
If other Insiders of the Company terminate during a closed window period, they will remain
subject to the closed window period and cannot buy or sell the Company’s securities in non-
exempt transactions until an Open Window Period.
2.0 Potential Criminal or Civil Liability and/or Disciplinary Action
The consequences of Insider Trading violations can be significant and could lead to criminal or civil
liability. In addition, Insiders who violate this Policy shall also be subject to disciplinary action by the
Company, which may include ineligibility for future participation in the Company’s equity incentive
plans or termination of employment or other service provider relationships.
4

-- 169 of 187 --

In the event that any Officer or Director of the Company is subject to a final judgment in an
enforcement action taken by the United States Department of Justice or the SEC for violation of
insider trading laws, the Company has the right to claw back the proceeds of such insider trading from
the Officer or Director against whom the final judgment was issued.
3.0 Individual Responsibility
All Insiders have the individual responsibility to comply with this Policy against Insider Trading. The
requirements set forth in this Policy are not intended to be exhaustive, and appropriate judgment
should be exercised in connection with any security trades of the Restricted Companies.
An Insider may, from time to time, have to forego a proposed transaction in the securities of the
Restricted Companies even if the Insider planned to make the transaction before learning of the
Material Non-Public Information and even though the Insider believes they may suffer an economic
loss or forego anticipated profit by waiting.
4.0 Specific Requirements for Certain Insiders
The following policies will apply with respect to the timing of trading in the Company’s securities:
4.1 Review of Trades. Directors and Employees of the Company at the Vice President level and
above (“Key Personnel”) are required to contact the Trading Compliance Officer (or such
individuals as he or she may designate) prior to the execution of any trade in the Company’s
securities to seek preclearance. Key Personnel shall certify in writing to the Trading
Compliance Officer that they are not in possession of Material Non-Public Information about
the Company. The Trading Compliance Officer shall acknowledge receipt of the certification
and confirm whether there have been undisclosed developments that, in the Trading
Compliance Officer’s discretion, would preclude the trade. No trades in Company securities by
Key Personnel shall occur prior to receiving such acknowledgement and confirmation that
there have been no such undisclosed developments. It shall be, at all times, the responsibility
of Key Personnel to comply with this Policy. Key Personnel shall be responsible for maintaining
records of preclearance.
If the service or employment of a Key Personnel terminates for any reason, the requirement for
preclearance of all trades will continue to apply to the Key Personnel until the earlier of 90 days
immediately following the termination date, or an Open Trading Window.
Preclearance does not relieve the Key Personnel of responsibility under SEC rules.
4.2 Additional Information – Directors and Officers. Director and Officers of the Company must
also comply with reporting obligations and limitations on short-swing transactions set forth in
Section 16 of the Exchange Act.
Subject to certain exceptions, Directors and Officers who purchase and sell the Company’s
securities within any six-month period must disgorge all profits to the Company whether or not
they had knowledge of any Material Non-Public Information. Under these provisions, and so
long as certain other criteria are met,
5

-- 170 of 187 --

the following transactions are exempt from short-swing profit liability under Section 16:
• The grant of a stock option, RSUs or PSUs;
• The exercise of a stock option; and
• The purchase of common stock through the Company’s ESPP.
4.3 Gifts of Stock. Under the assumption that minors living in their household are under custodial
control, Insiders are permitted to gift Company stock to minors living in their household outside
of Open Window Periods and outside of any then effective Trading Plan. If the Insider retains
dispositive power over the gifted shares, Insiders will also be permitted to gift Company stock
to family and other estate planning vehicles outside of Open Window Periods and outside of
any then effective Trading Plan. However, securities of the Company gifted to such minors,
trusts or other vehicles is subject to the restrictions of this Policy and may not be traded
outside of Open Window Periods.
Except in the foregoing cases, the Company prohibits Insiders from gifting securities of the
Company to family members or estate planning vehicles outside of Open Window Periods
unless pursuant to a Trading Plan adopted in compliance with this Policy. Insiders are
expected to be responsible for the compliance of this Policy by their immediate family and
personal household.
Charitable, educational and religious institutions generally trade gifted securities promptly after
receipt. To avoid improper transactions or the appearance of any improper transaction, Insiders
are not permitted to gift securities of the Company to charitable, educational, and religious
institutions, or other exempt organizations as defined in Internal Revenue Code §501(c),
outside of Open Window Periods unless pursuant to a Trading Plan adopted in compliance
with this Policy. Exceptions may be made in cases where the charitable recipient is unaffiliated
with the donor and an agreement is made not to dispose of the donated security until the next
Open Window Period. Such exceptions shall be at the sole discretion of the Trading
Compliance Officer.
4.4 10b5-1 Trading Plans
1.1.1 Requirements. SEC Rule 10b5-1 provides certain legal protections for
transactions under a previously established contract, plan or instruction to trade the
Company’s securities entered into in accordance with Rule 10b5-1 (a “Trading
Plan”). Rule 10b5-1 presents an opportunity for Insiders to establish arrangements
to sell or purchase securities of the Company, even when there is undisclosed
Material Non-Public Information. The use of such Trading Plans may also help
reduce negative publicity that may result when Officers and Directors sell or
purchase securities of the Company. Rule 10b5-1 only provides an “affirmative
defense,” which limits or excuses a defendant’s criminal culpability or civil liability, in
the event there is an insider-trading lawsuit. It does not prevent someone from
bringing a lawsuit against the Company or the Insider.
6

-- 171 of 187 --

Individuals may adopt Trading Plans with brokers that outline a pre-set formula for
trading of securities of the Company, including the exercise and sale of stock
options. All Directors, Officers and employees at the level of Senior Vice President
or above, shall enter into Trading Plans in order to sell the Company’s securities or
purchase the Company’s securities. Trading Plans are to be adopted only in good
faith during Open Window Periods and when the individual is not in possession of
any Material Non-Public Information. Further, the Insider who entered into the
Trading Plan must act in good faith with respect to the Trading Plan. It is the
Company’s policy that trades under a Trading Plan occur only within the Company’s
quarterly Open Window Periods.
Pursuant to Rule 10b5-1, an Insider’s purchase or sale of securities will not be “on
the basis of” Material Non-Public Information if, among other things:
First, before becoming aware of the information, the Insider enters into a binding
contract to purchase or sell the securities and adopts a Trading Plan.
Second, the Trading Plan discussed above: (i)(A) specifies the amount of securities
to be purchased or sold, the price at which the securities are to be purchased or
sold and the date(s) on which the securities are to be purchased and sold or (B)
includes a written formula, algorithm or computer program for determining the
amount, price and date of the transactions to be executed under the Trading Plan,
and (ii) prohibits the Insider from exercising any subsequent influence over the
transactions.
Third, the purchase or sale occurs pursuant to the Trading Plan and the Insider
does not enter into a corresponding hedging transaction.
4.4.2 Terminations to Plans. Although an Insider may terminate their Trading Plan, the
Company discourages such terminations. Terminations of a Trading Plan are
subject to preapproval by the Trading Compliance Officer (with such preapproval
not required after termination of employment or service with the Company). If the
Insider terminates a Trading Plan, such termination can result in the loss of an
affirmative defense for past or future transactions under a Trading Plan. The Insider
should consult with their legal counsel before deciding to terminate a Trading Plan.
Under certain circumstances, a Trading Plan must be terminated or suspended.
This includes circumstances such as the announcement of a merger involving the
Company or the occurrence of a material event that would cause the transaction
either to violate the law or to have an adverse effect on the Company. The Trading
Compliance Officer is authorized to notify the broker in such circumstances of such
suspension or termination.
Amendments to Trading plans are not permitted.
7

-- 172 of 187 --

1.1.3 Duration. The Company does not permit Trading Plans of less than twelve months’
duration or longer than two years in duration.
1.1.4 Cooling-Off Period. The Company requires a “Cooling Off Period” that extends to
the later of 90 days after adoption of a Trading Plan or two business days after filing
the Form 10-K or Form 10-Q covering the fiscal quarter in which the Trading Plan
was adopted, up to a maximum of 120 days. It is the Insider’s responsibility to
ensure that the Trading Plan complies with this provision. In addition, an Insider
who terminates a Trading Plan prior to the term of such Trading Plan must wait for
the Cooling Off Period described above before entering into a new Trading Plan.
1.1.5 One Trading Plan. Insiders may not adopt more than one Trading Plan at a time
except under the limited circumstances permitted by Rule 10b5-1 and subject to
preapproval by the Trading Compliance Officer.
1.1.6 Required Representation in Trading Plan. For Officers and Directors, any
Trading Plan must include a representation in the Trading Plan that the Insider is (i)
not aware of any Material Non-Public Information about the Company or its
securities; and (ii) adopting the Trading Plan in good faith and not as part of a plan
or scheme to evade Rule 10b-5.
1.1.7 Discretionary Trading Plan. The Company does not allow discretionary Trading
Plans, where the control over trading is transferred to a broker or other individual.
1.1.8 Pre-Approval of Trading Plan. The Trading Compliance Officer must pre-approve
all Trading Plans, but the actual transactions effected pursuant to a pre-approved
Trading Plan will not be subject to the Trading Compliance Officer’s preclearance
once the Trading Plan has been implemented.
1.1.9 Reporting (If Required). A Form 144 will be completed and filed with the SEC by
the brokerage firm in accordance with the existing rules regarding Form 144 filings.
The date of plan adoption will be included in the signature block of the Form 144.
For Officers and Directors, filings under Section 16 of the Exchange Act are
required, including filings on Form 4 which are generally required within two
business days following the date of the applicable transaction. Trading Plans do not
exempt the individuals from complying with the Section 16 six-month short swing
profit rules or liability.
1.1.10 Options. The cash exercise of options can be executed at any time. Same-day-
sale exercises of options are subject to Open Trading Window and this Policy.
Trading Plans must be structured so that trading only occurs during the Company’s
quarterly Open Window Periods.
8

-- 173 of 187 --

1.1.11 Trades Outside of a Trading Plan. Except as set forth in Paragraph 4.4.13 below,
once a Trading Plan has been implemented, no additional trades may be placed by
the Insider, including the sale of stock options, open market purchases or sales of
securities, sales of shares acquired through the Company’s ESPP and upon vesting
and settlement of RSUs and PSUs.
1.1.12 Public Disclosures. The Company may make a public announcement, disclosure,
and/or securities filing (e.g., a Form 8-K) that discloses the adoption, modification,
or termination of a Trading Plan and non-Rule 10b5-1 trading arrangements, or the
execution of transactions made under a Trading Plan. It will consider in each case
whether a public announcement and/or a securities filing of a particular Trading
Plan should be made. The Trading Compliance Officer may monitor regulatory and
other developments, and seek guidance from outside legal counsel in determining
whether to make a public announcement or securities filing with respect to any
Trading Plan. The Company may also make public announcements or respond to
inquiries from the media as transactions are made under a Trading Plan.
1.1.13 Charitable Gifts. Insiders who have adopted a Trading Plan may make charitable
gifts outside that Trading Plan provided that such gifts are made during an Open
Window Period and when the individual is not in the possession of Material Non-
Public Information. Personnel intending to make any such charitable gift are
encouraged to consult with their personal attorney before making any such gift.
5.0 Trading Compliance Officer. The Chief Financial Officer is the Trading Compliance Officer for this
Policy. All determinations and interpretations by the Trading Compliance Officer are final and are not
subject to further review or appeal. The Chief Financial Officer may designate the General Counsel to
act in his or her stead as the Trading Compliance Officer for this Policy.
6.0 Training and Inquiries. Training under this Policy is available through the Company’s ISU. All
employees of the Company are required to take the training as assigned and shall certify their training.
Please direct your questions as to any of the matters discussed in this Policy to the Trading
Compliance Officer.
9

-- 174 of 187 --

Exhibit 21.1
INTUITIVE SURGICAL, INC.
SUBSIDIARIES (All 100% owned other than Guanxing Medical Device (Beijing) Co., Ltd., Intuitive Surgical-Fosun (HongKong) Co., Ltd.,
Intuitive Surgical-Fosun Medical Device (Hainan) Co., Ltd., Intuitive Surgical-Fosun Medical Device (Tianjin) Co., Ltd., and Intuitive Surgical-
Fosun Medical Technology (Shanghai) Co., Ltd.)
Subsidiaries of the Registrant
State or Other Jurisdiction of
Incorporation
Guanxing Medical Device (Beijing) Co., Ltd. 	China
Intuitive Fluorescence Imaging LLC 	Delaware, U.S.
Intuitive Rose, LLC 	Delaware, U.S.
Intuitive Surgical AB 	Sweden
Intuitive Surgical ApS 	Denmark
Intuitive Surgical Australia Proprietary Limited 	Australia
Intuitive Surgical B.V. 	Netherlands
Intuitive Surgical Brasil Importacao E Comercio De Equipamentos Cirurgicos Ltda. 	Brazil
Intuitive Surgical Bulgaria EOOD 	Bulgaria
Intuitive Surgical Canada Inc. 	Canada
Intuitive Surgical Deutschland GmbH 	Germany
Intuitive Surgical GK 	Japan
Intuitive Surgical HK Limited 	Hong Kong
Intuitive Surgical Holdings, LLC 	Delaware, U.S.
Intuitive Surgical India Private Limited 	India
Intuitive Surgical International B.V. 	Netherlands
Intuitive Surgical International Finance LLC 	Delaware, U.S.
Intuitive Surgical Ireland Limited 	Ireland
Intuitive Surgical Italia s.r.l. 	Italy
Intuitive Surgical Korea Limited 	South Korea
Intuitive Surgical Israel Ltd. 	Israel
Intuitive Surgical Limited 	United Kingdom
Intuitive Surgical Malaysia Sdn. Bhd. 	Malaysia
Intuitive Surgical Medical Device Science & Technology (Shanghai) Co., Ltd. 	China
Intuitive Surgical Medical Device Taiwan Ltd. 	Taiwan
Intuitive Surgical Operations, Inc. 	Delaware, U.S.
Intuitive Surgical Optics GmbH 	Germany
Intuitive Surgical Osterreich GmbH 	Austria
Intuitive Surgical Service Optics Inc. 	Massachusetts, U.S.
Intuitive Surgical Pte. Ltd. 	Singapore
Intuitive Surgical S. de R. L. de C.V. 	Mexico
Intuitive Surgical S.A.S. 	France
Intuitive Surgical s.r.o. 	Czech Republic
Intuitive Surgical Sarl 	Switzerland
Intuitive Surgical Sarl Taiwan Branch 	Taiwan
Intuitive Surgical Spain, S.L. 	Spain
Intuitive Surgical SRL 	Belgium
Intuitive Surgical Turkey Medikal Cihaz Ticaret Limited Serketi 	Turkey
Intuitive Surgical-Fosun (HongKong) Co., Ltd. 	Hong Kong
Intuitive Surgical-Fosun Medical Device (Hainan) Co., Ltd. 	China

-- 175 of 187 --

Exhibit 21.1
Subsidiaries of the Registrant
State or Other Jurisdiction of
Incorporation
Intuitive Surgical-Fosun Medical Device (Tianjin) Co., Ltd. 	China
Intuitive Surgical-Fosun Medical Technology (Shanghai) Co., Ltd. 	China
Intuitive Ventures Fund I, LLC 	Delaware, U.S.
Intuitive Ventures Fund II, LLC 	Delaware, U.S.
Orpheus Medical GmbH 	Germany
Orpheus Medical Ltd. 	Israel

-- 176 of 187 --

Exhibit 23.1
CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
We hereby consent to the incorporation by reference in the Registration Statement on Form S-8 (Nos. 333-288895, 333-280923, 333-266304, 333-258073,
333-240046, 333-232829, 333-221043, 333-211064, 333-203793, 333-189399, 333-184488, 333-180863, 333-175904, 333-173803, 333-166833, 333-
164586, 333-159228, 333-152558, 333-143433, 333-135004, 333-127162, 333-116499, 333-99893, 333-65342, and 333-43558) of Intuitive Surgical, Inc.
of our report dated February 3, 2026, relating to the financial statements, financial statement schedule and the effectiveness of internal control over
financial reporting, which appears in this Form 10-K.
/s/ PricewaterhouseCoopers LLP
San Jose, California
February 3, 2026

-- 177 of 187 --

Exhibit 31.1
Certification of Chief Executive Officer
Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
I, David J. Rosa, certify that:
1. I have reviewed this annual report on Form 10-K of Intuitive Surgical, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the
statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this
report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the
financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in
Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f))
for the registrant and have:
a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to
ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those
entities, particularly during the period in which this report is being prepared;
b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our
supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles;
c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the
effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent
fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially
affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the
registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably
likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control
over financial reporting.
Date: 	February 3, 2026 	By: 	/S/ DAVID J. ROSA
David J. Rosa
Chief Executive Officer

-- 178 of 187 --

Exhibit 31.2
Certification of Chief Financial Officer
Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
I, Jamie E. Samath, certify that:
1. I have reviewed this annual report on Form 10-K of Intuitive Surgical, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the
statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this
report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the
financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in
Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f))
for the registrant and have:
a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to
ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those
entities, particularly during the period in which this report is being prepared;
b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our
supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles;
c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the
effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent
fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially
affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the
registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably
likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control
over financial reporting.
Date: 	February 3, 2026 	By: 	/S/ JAMIE E. SAMATH
Jamie E. Samath
Executive Vice President and Chief Financial Officer

-- 179 of 187 --

Exhibit 32.1
Certification of Chief Executive Officer
Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
Pursuant to 18 U.S.C. § 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, the undersigned officer of Intuitive Surgical, Inc. (the
“Company”) hereby certifies, to such officer’s knowledge, that:
(i) the accompanying annual report on Form 10-K of the Company for the annual period ended December 31, 2025 (the “Report”) fully complies
with the requirements of Section 13(a) or Section 15(d), as applicable, of the Securities Exchange Act of 1934, as amended; and
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the
Company.
Date: 	February 3, 2026 	By: 	/S/ DAVID J. ROSA
David J. Rosa
Chief Executive Officer

-- 180 of 187 --

Exhibit 32.2
Certification of Chief Financial Officer
Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
Pursuant to 18 U.S.C. § 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, the undersigned officer of Intuitive Surgical, Inc. (the
“Company”) hereby certifies, to such officer’s knowledge, that:
(i) the accompanying annual report on Form 10-K of the Company for the annual period ended December 31, 2025 (the “Report”) fully complies
with the requirements of Section 13(a) or Section 15(d), as applicable, of the Securities Exchange Act of 1934, as amended; and
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the
Company.
Date: 	February 3, 2026 	By: 	/S/ JAMIE E. SAMATH
Jamie E. Samath
Executive Vice President and Chief Financial Officer

-- 181 of 187 --

Exhibit 97.1
INTUITIVE SURGICAL, INC.
CLAWBACK POLICY
(as amended January 29, 2026)
Intuitive Surgical, Inc. (the “Company”) has adopted this Clawback Policy (the “Policy”), originally effective as of
October 2, 2023 (the “Effective Date”). Capitalized terms used in the text of this Policy but not otherwise defined herein are
defined in Section 11.
1. 	Persons Subject to Policy
This Policy shall apply to current and former Officers. Each Officer shall be required to sign an acknowledgment pursuant
to which such Officer will agree to be bound by the terms of, and comply with, this Policy; however, any Officer’s failure to sign
any such acknowledgment shall not negate the application of this Policy to the Officer.
2. Compensation Subject to Policy
Except as otherwise provided in the second paragraph under Section 3 below, this Policy shall apply to Incentive-Based
Compensation received on or after the Effective Date. For purposes of this Policy, the date on which Incentive-Based
Compensation is “received” shall be determined under the Applicable Rules, which generally provide that Incentive-Based
Compensation is “received” in the Company’s fiscal period during which the relevant Financial Reporting Measure is attained or
satisfied, without regard to whether the grant, vesting or payment of the Incentive-Based Compensation occurs after the end of
that period.
3. Recovery of Compensation
In the event that the Company is required to prepare a Restatement, the Company shall recover, reasonably promptly, the
portion of any Incentive-Based Compensation that is Erroneously Awarded Compensation, unless the Committee has determined
that recovery would be Impracticable. Recovery shall be required in accordance with the preceding sentence regardless of
whether the applicable current or former Officer engaged in misconduct or otherwise caused or contributed to the requirement for
the Restatement and regardless of whether or when restated financial statements are filed by the Company.
In addition to the mandatory recoupment under this Policy as described above, in the event that the Company is required
to prepare a Restatement and the Committee determines the current or former Officer’s engagement in fraudulent or willful
misconduct contributed to and/or resulted in a Restatement, then the Committee may, in its sole discretion (considering any
factors the Committee deems appropriate), require an Officer to repay or forfeit to the Company any time-vesting equity-based
award or performance-vesting equity-based award, or portion thereof,
1

-- 182 of 187 --

that was granted, earned or vested during the Three-Year Period OR that the Committee determines would not, or was in excess
of the amount that would, have been granted, earned or vested during the Three-Year Period. The amount to be recouped under
this paragraph shall be determined by the Committee in its sole and absolute discretion.
For clarity, the recovery, or attempted recovery, of Erroneously Awarded Compensation or other compensation under this
Policy will not give rise to any person’s right to voluntarily terminate employment for “good reason,” or due to a “constructive
termination” (or any similar term of like effect) under any plan, program or policy of or agreement with the Company or any of
its affiliates.
4. Manner of Recovery; Limitation on Duplicative Recovery
The Committee shall, in its sole discretion, determine the manner of recovery of any Erroneously Awarded Compensation
or other compensation recoverable under this Policy, which may include, without limitation, reduction or cancellation by the
Company or an affiliate of the Company of Incentive-Based Compensation or Erroneously Awarded Compensation or other
compensation recoverable under this Policy, reimbursement or repayment by any person subject to this Policy of the Erroneously
Awarded Compensation or other compensation, and, to the extent permitted by law, an offset of the Erroneously Awarded
Compensation or other compensation recoverable under this Policy against other compensation payable by the Company or an
affiliate of the Company to such person. Notwithstanding the foregoing, unless otherwise prohibited by the Applicable Rules, to
the extent this Policy provides for recovery of Erroneously Awarded Compensation or other compensation already recovered by
the Company pursuant to Section 304 of the Sarbanes-Oxley Act of 2002 or Other Recovery Arrangements, the amount of
Erroneously Awarded Compensation already recovered by the Company from the recipient of such Erroneously Awarded
Compensation will be credited to the amount of Erroneously Awarded Compensation or other compensation required to be
recovered pursuant to this Policy from such person.
5. Administration
This Policy shall be administered, interpreted and construed by the Committee, which is authorized to make all
determinations necessary, appropriate or advisable for such purpose. The Board of Directors of the Company (the “Board”) may
re-vest in itself the authority to administer, interpret and construe this Policy in accordance with applicable law, and in such event
references herein to the “Committee” shall be deemed to be references to the Board. Subject to any permitted review by the
applicable national securities exchange or association pursuant to the Applicable Rules, all determinations and decisions made by
the Committee pursuant to the provisions of this Policy shall be final, conclusive and binding on all persons, including the
Company and its affiliates, equityholders and employees. The Committee may delegate administrative duties with respect to this
Policy to one or more directors or employees of the Company, as permitted under applicable law, including any Applicable Rules.
2
|

-- 183 of 187 --

6. Interpretation
The mandatory recoupment of Erroneously Awarded Compensation under this Policy will be interpreted and applied in a
manner that is consistent with the requirements of the Applicable Rules, and to the extent the mandatory recoupment of
Erroneously Awarded Compensation under this Policy is inconsistent with such Applicable Rules, it shall be deemed amended to
the extent necessary to ensure it is consistent therewith.
7. No Indemnification; No Personal Liability
The Company shall not indemnify or insure any person against the loss of any Erroneously Awarded Compensation or
other compensation pursuant to this Policy, nor shall the Company directly or indirectly pay or reimburse any person for any
premiums for third-party insurance policies that such person may elect to purchase to fund such person’s potential obligations
under this Policy. No member of the Committee or the Board shall have any personal liability to any person as a result of actions
taken under this Policy and each member of the Committee and the Board shall be fully indemnified by the Company to the
fullest extent available under applicable law and the Company’s governing documents with respect to any actions taken under
this Policy. The foregoing sentence shall not limit any other rights to indemnification of the members of the Board under
applicable law and the Company’s governing documents.
8. Application; Enforceability
Effective as of the Effective Date, the Policy shall supersede and replace in its entirety the Company’s existing Clawback
Policy adopted in 2019 (the “Prior Clawback Policy”); provided that, notwithstanding the foregoing, any cash incentive or
performance-vesting equity based awards that are received prior to the Effective Date shall continue to remain subject to the Prior
Clawback Policy.
Except as otherwise determined by the Committee or the Board or to the extent specified above in respect of the Prior
Clawback Policy, the adoption of this Policy does not limit, and is intended to apply in addition to, any other clawback,
recoupment, forfeiture or similar policies or provisions of the Company or its affiliates, including any such policies or provisions
of such effect contained in any employment agreement, bonus plan, incentive plan, equity-based plan or award agreement
thereunder or similar plan, program or agreement of the Company or an affiliate or required under applicable law (the “Other
Recovery Arrangements”). The remedy specified in this Policy shall not be exclusive and shall be in addition to every other right
or remedy at law or in equity that may be available to the Company or an affiliate of the Company. This Policy shall be binding
and enforceable against all current and former Officers and their beneficiaries, heirs, executors, administrators or other legal
representatives.
9. Severability
3
|

-- 184 of 187 --

The provisions in this Policy are intended to be applied to the fullest extent of the law; provided, however, to the extent
that any provision of this Policy is found to be unenforceable or invalid under any applicable law, such provision will be applied
to the maximum extent permitted, and shall automatically be deemed amended in a manner consistent with its objectives to the
extent necessary to conform to any limitations required under applicable law.
10. Amendment and Termination
The Board or the Committee may amend, modify or terminate this Policy in whole or in part at any time and from time to
time in its sole discretion. This Policy will terminate automatically when the Company does not have a class of securities listed
on a national securities exchange or association.
11. Definitions
“Applicable Rules” means Section 10D of the Exchange Act, Rule 10D-1 promulgated thereunder, the listing rules of the
national securities exchange or association on which the Company’s securities are listed, and any applicable rules, standards or
other guidance adopted by the Securities and Exchange Commission or any national securities exchange or association on which
the Company’s securities are listed.
“Committee” means the committee of the Board responsible for executive compensation decisions comprised solely of
independent directors (as determined under the Applicable Rules), or in the absence of such a committee, a majority of the
independent directors serving on the Board.
“Erroneously Awarded Compensation” means the amount of Incentive-Based Compensation received by a current or
former Officer that exceeds the amount of Incentive-Based Compensation that would have been received by such current or
former Officer based on a restated Financial Reporting Measure, as determined on a pre-tax basis in accordance with the
Applicable Rules.
“Exchange Act” means the Securities Exchange Act of 1934, as amended.
“Financial Reporting Measure” means any measure determined and presented in accordance with the accounting
principles used in preparing the Company’s financial statements, and any measures derived wholly or in part from such measures,
including GAAP and non-GAAP financial measures, as well as stock or share price and total equityholder return.
“GAAP” means United States generally accepted accounting principles.
“Impracticable” means (a) the direct costs paid to third parties to assist in enforcing recovery would exceed the
Erroneously Awarded Compensation; provided that the Company has (i) made reasonable attempts to recover the Erroneously
Awarded Compensation, (ii)
4
|

-- 185 of 187 --

documented such attempt(s), and (iii) provided such documentation to the relevant listing exchange or association, (b) to the
extent permitted by the Applicable Rules, the recovery would violate the Company’s home country laws pursuant to an opinion
of home country counsel; provided that the Company has (i) obtained an opinion of home country counsel, acceptable to the
relevant listing exchange or association, that recovery would result in such violation, and (ii) provided such opinion to the
relevant listing exchange or association, or (c) recovery would likely cause an otherwise tax-qualified retirement plan, under
which benefits are broadly available to employees of the Company, to fail to meet the requirements of 26 U.S.C. 401(a)(13) or 26
U.S.C. 411(a) and the regulations thereunder.
“Incentive-Based Compensation” means, with respect to a Restatement, any compensation that is granted, earned, or
vested based wholly or in part upon the attainment of one or more Financial Reporting Measures and received by a person: (a)
after beginning service as an Officer; (b) who served as an Officer at any time during the performance period for that
compensation; (c) while the Company has a class of its securities listed on a national securities exchange or association; and (d)
during the applicable Three-Year Period.
“Officer” means each person who serves as an executive officer of the Company, as defined in Rule 10D-1(d) under the
Exchange Act.
“Restatement” means an accounting restatement to correct the Company’s material noncompliance with any financial
reporting requirement under securities laws, including restatements that correct an error in previously issued financial statements
(a) that is material to the previously issued financial statements or (b) that would result in a material misstatement if the error
were corrected in the current period or left uncorrected in the current period.
“Three-Year Period” means, with respect to a Restatement, the three completed fiscal years immediately preceding the
date that the Board, a committee of the Board, or the officer or officers of the Company authorized to take such action if Board
action is not required, concludes, or reasonably should have concluded, that the Company is required to prepare such
Restatement, or, if earlier, the date on which a court, regulator or other legally authorized body directs the Company to prepare
such Restatement. The “Three-Year Period” also includes any transition period (that results from a change in the Company’s
fiscal year) within or immediately following the three completed fiscal years identified in the preceding sentence. However, a
transition period between the last day of the Company’s previous fiscal year end and the first day of its new fiscal year that
comprises a period of nine to 12 months shall be deemed a completed fiscal year.
5
|

-- 186 of 187 --

ACKNOWLEDGMENT AND CONSENT TO
CLAWBACK POLICY
The undersigned has received a copy of the Clawback Policy (as amended from time to time, the “Policy”) adopted by Intuitive
Surgical, Inc. (the “Company”).
In consideration of, and as a condition to, the receipt of future cash and equity incentive compensation from the Company, the
undersigned agrees to the terms of the Policy and agrees that compensation received by the undersigned may be subject to
reduction, cancellation, forfeiture and/or recoupment to the extent necessary to comply with the Policy, notwithstanding any other
agreement to the contrary. The undersigned further acknowledges and agrees that the undersigned is not entitled to
indemnification in connection with any enforcement of the Policy and expressly waives any rights to such indemnification under
the Company’s organizational documents or otherwise.
___________________
Date
________________________________________
Signature
________________________________________
Name
________________________________________
Title
6
|

-- 187 of 187 --