SHAREHOLDER LETTER

Q1 FY2021 — Shareholder letter

Q1 FY2021PDF · 18 pages1.4 MB
Letter to Shareholders – September Quarter 2020 – October 28, 2020
October 28, 2020
Letter to Shareholders
September 2020 Quarterly Letter
Rick Wallace
Chief Executive Officer
Bren Higgins
Chief Financial Officer

-- 1 of 18 --

Page | 2
Letter to Shareholders – September Quarter 2020 – October 28, 2020
Dear KLA Shareholders,
As we rapidly approach the end of the calendar year, it’s amazing to think how much has changed
over the past 12 months. We hope you and your families are safe and in good health, and we
appreciate your continued interest in and support for our company.
We want to begin by conveying our appreciation for the worldwide KLA team. Your perseverance,
drive to be better, and determination exemplify KLA’s Core Values and enabled us once again to meet
our commitments and deliver exceptionally strong financial performance in the September quarter.
On behalf of the entire KLA executive team, we thank you.
In this quarter’s Shareholder Letter, we will highlight how our results demonstrate the resourcefulness
of our global workforce, the resiliency of our business model, and our continuing commitment to
returning value to our shareholders.
Our September quarter revenue and non-GAAP EPS both finished at the upper end of our guidance
ranges, a result of continued strong demand from customers, exceptional execution by our global
teams, and the enduring strength and resiliency of the KLA Operating Model in guiding our Strategic
Objectives.
We are continuing this momentum into the December quarter and nearing the end of what truly has
been an unprecedented year in calendar 2020. Most importantly, we are executing at a high level,
operating from a position of strength in our marketplace, and are solidly on track to meet or exceed
our 2023 financial targets.
Resourcefulness of our Global Workforce
We just completed the third quarter of operating through a pandemic. COVID-19 has presented an
unexpected opportunity to showcase KLA’s resilience and resourcefulness in these unprecedented
times.
We have been proactively taking steps to mitigate disruption in our business and remain vigilant on
the risks posed by the virus on our people. We’ve done this by adopting strict safety protocols to
protect our workforce while innovating in new ways to collaborate with customers and partners. As
demonstrated by our strong performance throughout 2020, we are successfully meeting customer
needs, executing our R&D roadmap, and operating our worldwide manufacturing facilities efficiently.
We continue to evaluate and adapt at our various facilities in accordance with local regulations,
prioritizing employee health and safety.
Our worldwide teams deserve high praise for never losing sight of what our customers want and need
to improve their businesses and drive better yield management. We have benefited from them being
exceptionally resourceful and as always, remaining committed to customer satisfaction and meeting
our commitments. When we consider the challenges our worldwide teams are facing today, we
recognize they extend well beyond the workplace, which makes us intently focused on ensuring that
we are supporting our teams and our people in any way possible.
Lastly, investment in the long-term remains an important priority for us. We are confident that our
R&D programs will help strengthen our technology and market leadership. We are gratified by the

-- 2 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 3
effectiveness of our business continuity actions which have allowed our R&D activities to adapt,
although not without challenges, and continue during this pandemic.
Now, turning to the industry demand environment. In the September quarter we saw broad,
diversified strength across each of our segments. Semiconductor Process Control revenue was solidly
above plan, and our Services business delivered strong operating leverage and is on track to deliver
double-digit growth in 2020. We also ended the quarter with strong backlog, reflecting the enabling
role KLA plays in our customers' technology roadmap and investment.
Driven by the secular industry trends and the ongoing commitment by our customers to invest in R&D
for next generation technology, the stage is set for KLA to outgrow our market in calendar 2020.
Today’s environment continues to accelerate the adoption of several industry growth drivers that we
originally outlined at our 2019 Investor Day. The integration of digital technology into our lives is
transforming the way we live and work, resulting in fundamental changes to how businesses operate
and deliver value to customers. This digital transformation is fueling secular demand drivers such as
High-Performance Computing (HPC), Artificial Intelligence (AI), accelerated migration to the Cloud
from “on prem” applications and 5G communication, driving investments and innovation in advanced
Memory and Logic device technologies. Process Control is on the critical path of enabling this digital
transformation, driving our growth and long-term revenue and profitability objectives, and the
addition of Orbotech in 2019 to our business portfolio has further expanded our exposure to the
compelling industry trends.
We are driving this all-important digital transformation in our own business, including adopting new
productivity tools to improve collaboration with our global teams and customers. For example, our
Services business has been working closely with our customers to expand remote service technologies
to augment our in-country service and installation engineers. We have also recently adopted and
integrated a new cloud-based platform for managing our global Human Resource Management
systems that should continue to benefit us as we scale. Finally, we are also integrating cloud-based
manufacturing and service planning tools to increase the visibility of our parts demand to our

-- 3 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 4
suppliers and to allow us to more proactively respond to customer service requirements. These are
just a few examples of the accelerated digital transformation that we ourselves are experiencing
inside of KLA as we adapt to this new environment.
Resiliency of our Business Model
One thing that remains a constant for us is the KLA Operating Model. The Operating Model codifies
our corporate values and management principles, which defines the critical core competencies and
operating disciplines that drive our performance. The KLA Operating Model is the enduring framework
that we rely on to guide the execution of our long-term Strategic Objectives.

-- 4 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 5
We deploy the KLA Operating Model to align the company on a consistent strategy, tie accountability
to results, drive product development execution, and facilitate continuous improvement while
ensuring the company always operates with strong financial discipline as we pursue our long-term
performance and profitability objectives.
Here are five top highlights from our most recent quarter:
First, as expected, we saw continued strength and breadth in Foundry and Logic demand in the
September quarter. These customers are benefitting from investment in digital infrastructure to
support the secular growth drivers that we mentioned earlier, and we expect this demand to remain
healthy in 2021. In Memory, tool utilization is high, and Memory customers continue to drive down
device inventories and plan for higher bit growth in 2021 to meet expected improvement in end
demand. We expect higher business levels across a broader range of customers in the December
quarter, with momentum continuing into 2021. The strength in demand we are seeing reflects KLA’s
essential role in supporting our customers' drive to innovate and continue to invest in future
technology nodes.
Second, we ended the quarter with strong backlog demonstrating momentum in the marketplace
across multiple product platforms in both the Semiconductor Process Control and EPC groups. Fueled
by new applications in our optical inspection portfolio (such as EUV print check for GEN5), and the
success of new offerings including the eSL10 e-beam inspection platform, we are seeing strong
adoption of our Patterned Wafer Inspection product suite, driving our market leadership in what we
expect will be a year of growth for Process Control relative to the overall WFE market. Solutions in this
product suite include Gen4 and Gen5 Broadband Plasma and Laser Scattering optical inspection
platforms, as well as e-beam technologies for both Inspection and Review applications. Our product
strategy of offering a portfolio of solutions addressing our customers’ most complex technical
challenges is a unique differentiator for KLA that drives our growth and market leadership.
Third, our Service business continues to perform well and is positioned for double-digit growth in
2020. Several factors drive long term growth in Service, including a growing installed base, increasing

-- 5 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 6
complexity of our systems, tighter time to market requirements for our customers, and market
expansion at trailing edge nodes. As a result, we see robust service contract penetration, which has
steadily risen from 70%+ to 75%+ over the past few quarters. This demonstrates the resiliency and
predictability of Services’ subscription-like annuity revenue stream. KLA’s Service revenue is 25% of
total quarterly revenue and is delivering long-term growth at a rate that is double the underlying
industry WFE growth rate.
Fourth, it was another strong quarter for the Electronics, Packaging, and Components (EPC) group,
highlighted by record demand for our PCB (Printed Circuit Board) division. The strong quarter in PCB
was driven by EPC’s high exposure to the 5G infrastructure and smartphone markets. Our PCB
business also features a strong recurring revenue component from Services, pointing to the
differentiation and complexity of our product portfolio. The SPTS and ICOS divisions are also
benefiting from the 5G transition along with increasingly more complex advanced semiconductor
packaging.
Continuing Commitment to Returning Value to our Shareholders
Finally, in keeping with our commitment to deliver strong and predictable capital returns to our
shareholders, we announced back in July that our Board of Directors approved our 11th consecutive
dividend increase. During the September quarter we repurchased $188 million of our common stock
and paid $141 million in dividends. It’s worth noting that KLA’s dividend payout has grown at a CAGR
of approximately 15% since inception back in 2006. Over the past 12 months, we have returned $1.3
billion to shareholders or 82% of Free Cash Flow. We believe our track record of delivering strong
capital returns is a key component of the KLA Investment Thesis and offers predictable and compelling
value creation for our shareholders.
Before getting into greater detail on our financial highlights, let’s briefly summarize. Despite the
disruption and unforeseen challenges in the year associated with the pandemic, KLA has benefited
from the resourcefulness of its global workforce, adapted well, and is well positioned for a strong
finish to 2020. This demonstrates the critical nature of our products and services in enabling the digital
transformation of our lives, the resiliency of our business model, and the return of value to our
shareholders.
We believe the secular factors driving industry demand that we identified at last year’s Investor Day
are as relevant now as they were then, and they will help enable us to achieve our 2023 financial
targets. At the same, our strategy of driving diversified growth with strong long-term operating
leverage should fuel consistent capital returns to our shareholders.

-- 6 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 7
KLA’s September quarter results highlight both the soundness and strength of our ongoing strategy.
We continue to demonstrate our ability to meet customer needs and expand our market leadership,
while growing operating profits, generating strong free cash flow, and maintaining our robust capital
returns strategies.
Total revenue was $1.54 billion. Non-GAAP Gross Margin was 62.1%, at the upper end of the guided
range for the quarter of 60.5% to 62.5%.
Non-GAAP EPS was $3.03, at the high-end of the guided range of $2.42 to $3.06. GAAP EPS was $2.69.

-- 7 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 8
Gross Margin of 62.1% was 60 basis points above the midpoint of guidance as higher semiconductor
process control product mix, lower inventory reserve requirements due to strengthening demand, and
services leverage drove the upside realized in the quarter.
Total Operating Expenses were in line with guidance at $375 million, including $218 million of R&D
expense, and $157 million of SG&A. Operating expenses continue to be lower than normalized levels
overall due to lower travel expenses, a slower hiring pace due to COVID-19 related disruptions, and
faster synergy realization in our acquired businesses. We are reinvesting these savings where possible
into R&D programs to fuel our future growth and continued market leadership. Non-GAAP Operating
margin was strong at 37.7%. Other Interest and Expense in the September quarter was $43 million.
The effective tax rate was 12%, slightly below our 13% long-term effective tax planning rate.
Non-GAAP net income was $475 million, cash flow from operations was $512 million, and free cash
flow was strong at $456 million. This resulted in a free cash flow conversion of 96.1% and a very
healthy free cash flow margin of 29.7%. The company had approximately 156 million diluted weighted
average shares outstanding.
Breakdown of Revenue by Reportable Segments and End Markets
Our segment revenue was solidly above our expectations, with particular strength in our
semiconductor process control business. PCB and Component Inspection were also above
expectations with specialty semiconductor in line with our model heading into the quarter.
Revenue for the Semiconductor Process Control segment, including its associated Service business was
$1.27 billion. In terms of approximate customer segment mix of Process Control systems revenue to
semiconductor customers: Foundry was strong as expected at 59%, Logic was 10%, and Memory was
31% in the September quarter. Within Memory, the business was split roughly two-thirds DRAM and
one-third NAND.
Revenue for the Specialty Semiconductor Process segment was $89 million, down 11% sequentially,
but up 29% year-over-year. Demand in this segment is driven by growth in RF, MEMS, and advanced
packaging.
PCB, Display and Component Inspection revenue was $181 million, down 10% sequentially, but up 1%
year-over-year.

-- 8 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 9
Breakdown of Revenue by Major Products and Region
The distribution of revenue by major product category: Wafer inspection was 34%, Patterning, which
includes reticle inspection, was 21%. Wafer inspection and patterning are part of Semiconductor
Process Control. Specialty Semiconductor Process was 5%. PCB, Display and Component Inspection
was 8%, Service was 25%, and Other was 4%.
The regional split of revenue was as follows: China was 32% overall. Just over half our China revenue,
or approximately 19% of total revenue, was native China Semiconductor Process Control. Taiwan was
24%, Korea was 12%, the US was 11%, and Japan was 11%. The rest of Asia was 5%, and Europe
(including Israel) was 5%.

-- 9 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 10
Strong Investment Grade Balance Sheet with No Bond Maturities Until 2024
KLA ended the quarter with $2.04 billion in total cash, total debt of $3.45 billion, after retiring $50
million outstanding on our revolving line of credit, and a flexible and attractive bond maturity profile
supported by investment-grade ratings from all three agencies.
FCF Generation Fuels Consistent Capital Return to Shareholders
We remain committed to our long-term strategy for cash returns to shareholders, executing a
balanced approach split between dividends and share repurchases, targeting total long run returns of
70% or more of Free Cash Flow generated by the company.

-- 10 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 11
Over the past 12 months, we have returned $1.3 billion to shareholders or 82% of Free Cash Flow,
including $542 million in dividends paid, and $789 million in share repurchases. We believe our track
record of delivering strong capital returns is a key component of the KLA Investment Thesis and offers
predictable and compelling value creation for our shareholders.
KLA has a history of consistent free cash flow generation, high free cash flow conversion, and strong
free cash flow margins. KLA’s business model generates strong free cash flow and is very resilient
across the various phases of the business cycle and economic conditions.

-- 11 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 12
During the September quarter we repurchased $188 million of common stock and paid $141 million in
dividends. We have approximately $800 million remaining under our current share repurchase
authorization. Back in July, our Board approved the 11 th consecutive annual increase in our quarterly
dividend, raising our annual dividend run-rate by $0.20 to $3.60 per share. KLA’s dividend payout has
grown at a CAGR of approximately 15% since inception.
Outlook
As we begin the final quarter of calendar 2020, our view for WFE growth this year is approximately
10%, growing off a baseline of $52 to $53 billion in 2019. Given this, and our outlook for revenue
growth in the calendar fourth quarter, KLA is in position once again to outgrow our industry.
Looking forward, though early, based on our current backlog and sales funnel visibility over the next
couple of quarters, we are encouraged by the sustainability of our current demand profile for the first
half of calendar 2021. We will have more to say about our views of 2021 WFE in our January earnings
report.
Our December quarter guidance is as follows: Total revenue is expected to be in a range of $1.585
billion plus or minus $75 million. Foundry is forecasted to be about 52% of Semi Process Control
systems revenue to semiconductor customers, depicting the strength we continue to see amongst the
Foundry customer base. Memory is expected to grow to be approximately 37%. Logic is expected to
be about 11%.
We forecast Non-GAAP Gross Margin to be in a range of 61% to 63% as we expect similar product mix
and service leverage as in the September quarter. The market reception to product offerings in our
semiconductor process control business has been strong and as outlined at our Investor Day last year,
the company has made solid progress on our plans of driving cost and efficiencies on new product
platforms and leveraging scale derived by our worldwide service infrastructure. In addition, better
than modeled gross margin improvement in acquired businesses is a tailwind to our gross margins
overall.

-- 12 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 13
Other model assumptions include: Operating Expense of approximately $380 million, Interest and
Other Expense of approximately $42 million, and an effective tax rate of approximately 13%.
Finally, GAAP diluted EPS is expected to be in a range of $2.59 to $3.23 and non-GAAP diluted EPS in a
range of $2.82 to $3.46 or $3.14 at the midpoint. The EPS guidance is based on a fully diluted share
count of approximately 155 million shares.
In Conclusion
In closing, KLA is executing well with increasing confidence that we are on track to meet or exceed our
2023 target model, both in terms of top-line growth and profitability. Growth in semiconductor
revenue looks compelling over the long run with solid demand across end markets and at multiple
technology nodes. We are encouraged by the strength and resiliency of the KLA Operating Model,
which guides our strategic objectives. These objectives fuel our growth, operational excellence, and
differentiation across an increasingly more diverse product and service offering. They also underpin
our sustained technology leadership, deep competitive moat, and strong track record of free cash flow
generation and capital returns to shareholders.
Sincerely,
Rick Wallace 	Bren Higgins
CEO 	CFO

-- 13 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 14
Appendix

-- 14 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 15

-- 15 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 16

-- 16 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 17
About KLA Corporation
KLA Corporation (“KLA”) is the world's leading supplier of process control and yield management
solutions for the semiconductor and related microelectronics industries. The company's
comprehensive portfolio of products, software, analysis, services and expertise is designed to help
Integrated Circuit (IC) manufacturers manage yield throughout the entire wafer fabrication process-
from R & D to final yield analysis. KLA offers a broad spectrum of products and services that are used
by every major semiconductor manufacturer in the world. We provide advanced process control and
process-enabling solutions for manufacturing wafers and reticles, integrated circuits, packaging,
printed circuit boards and flat panel displays. In close collaboration with leading customers across the
globe, our expert teams of physicists, engineers, data scientists and problem-solvers design solutions
that move the world forward. Additional information may be found at: www.kla.com.
KLA’s broad portfolio services the entire Semiconductor ecosystem:
Semiconductor Manufacturing 	Related Electronics Industries
• 	IC Manufacturing 	• 	Compound Semiconductor
• 	Wafer Manufacturing 	• 	Power Device
• 	Reticle Manufacturing 	• 	LED
• 	IC Packaging 	• 	MEMS
• 	Printed Circuit Board 	• 	Data Storage/Media Head
• 	Flat Panel Display
• 	General Purpose/Labs
Investor Contact: 	Media Contact:
Kevin Kessel, CFA 	Randi Polanich
VP, Investor Relations 	VP, Chief Communications Officer
kevin.kessel@kla.com 	randi.polanich@kla.com
408-875-6627 	408-875-6633
Reticle Manufacturing
Wafer
Manufacturing
IC Manufacturing
Materials 	OEMs
Wafer-Level Packaging 	Packaging 	Printed Circuit Board

-- 17 of 18 --

Letter to Shareholders –September Quarter 2020 – October 28, 2020 	Page | 18
Note on Forward-Looking Statements
Statements in this letter other than historical facts, such as statements pertaining to: (i) industry
trends; (ii) customer demand and investment strategy; (iii) growth expectations for KLA in 2021 and
the remainder of 2020; (iv) KLA’s progress towards its 2023 financial targets; (v) growth of KLA’s
Services business in 2020 and beyond; (vi) the potential impact of U.S. trade restrictions; (vii)
anticipated dividends; (ix) revenue, gross margin, GAAP EPS, Non-GAAP EPS, operating expenses,
interest and other expense, effective tax rate, process control system revenue from foundry, memory
and logic customers, and diluted share count for the quarter ending December 31, 2020; are forward-
looking statements and subject to the Safe Harbor provisions created by the Private Securities
Litigation Reform Act of 1995. These forward-looking statements are based on current information
and expectations, and involve a number of risks and uncertainties. Actual results may differ materially
from those projected in such statements due to various factors, including but not limited to: the
future impacts of the COVID-19 pandemic; the demand for semiconductors; the financial condition of
the global capital markets and the general macroeconomic environment; new and enhanced product
and technology offerings by competitors; push-out of deliveries or cancellation of orders by
customers; the ability of KLA’s research and development teams to successfully innovate and develop
technologies and products that are responsive to customer demands; KLA’s ability to successfully
manage its costs; market acceptance of KLA’s existing and newly issued products; changing customer
demands; and industry transitions. For other factors that may cause actual results to differ materially
from those projected and anticipated in forward-looking statements in this letter, please refer to KLA
Corporation’s Annual Report on Form 10-K for the year ended June 30, 2020, and other subsequent
filings with the Securities and Exchange Commission (including, but not limited to, the risk factors
described therein). KLA Corporation assumes no obligation to, and does not currently intend to,
update these forward-looking statements.

-- 18 of 18 --