ANNUAL REPORT

FY 2025 — Annual report (Form 10-K)

FY 2025PDF · 100 pages963 KB
Table of Contents
-
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
X 	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED
DECEMBER 31, 2025
☐ 	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission File Number 0-21719
Steel Dynamics, Inc.
(Exact name of registrant as specified in its charter)
Indiana 	35-1929476
(State or other jurisdiction of incorporation or organization) 	(IRS Employer Identification No.)
7575 West Jefferson Blvd, Fort Wayne, IN 	46804
(Address of principal executive offices) 	(Zip Code)
Registrant’s telephone number, including area code: (260) 969-3500
Securities registered pursuant to Section 12(b) of the Act:
Title of each class 	Trading Symbol 	Name of each exchange on which registered
Common Stock voting, $0.0025 par value 	STLD 	NASDAQ Global Select Market
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes  No 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes  No 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding
12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  No 
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of
this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes  No 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See
the definitions of "large accelerated filer,” "accelerated filer,” "smaller reporting company,” and "emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer  	Accelerated filer 
Non-accelerated filer  	Smaller reporting company ☐ 	Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial
accounting standards provided pursuant to Section 13(a) of the Exchange Act. 
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting
under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. X
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of
an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s
executive officers during the relevant recovery period pursuant to §240.10D-1(b). 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No 
The aggregate market value of the voting stock held by non-affiliates of the registrant computed by reference to the price at which the common equity was last sold as of June 30,
2025, was approximately $13.0 billion. Registrant has no non-voting shares. For purposes of this calculation, shares of common stock held by directors, officers and 5%
stockholders known to the registrant have been deemed to be owned by affiliates, but this should not be construed as an admission that any such person possesses the power, direct
or indirect, to direct or cause the direction of the management or policies of the registrant or that such person is controlled by or under common control with the registrant.
As of February 25, 2026, Registrant had outstanding 144,882,401 shares of common stock.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of registrant’s definitive proxy statement for the 2026 Annual Meeting of Shareholders are incorporated by reference into Part III, Items 10 through 14, of this report.

-- 1 of 100 --

Table of Contents
STEEL DYNAMICS, INC.
Table of Contents
Page
Part I
Item 1. 	Business 	3
Item 1A. 	Risk Factors 	22
Item 1B. 	Unresolved Staff Comments 	31
Item 1C. 	Cybersecurity 	31
Item 2. 	Properties 	33
Item 3. 	Legal Proceedings 	34
Item 4. 	Mine Safety Disclosures 	34
Part II
Item 5. 	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 	35
Item 6. 	[Reserved] 	36
Item 7. 	Management’s Discussion and Analysis of Financial Condition and Results of Operations 	37
Item 7A. 	Quantitative and Qualitative Disclosures About Market Risk 	49
Item 8. 	Consolidated Financial Statements and Supplementary Data 	50
Item 9. 	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 	83
Item 9A. 	Controls and Procedures 	83
Item 9B. 	Other Information 	83
Item 9C. 	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 	83
Part III
Item 10. 	Directors, Executive Officers, and Corporate Governance 	84
Item 11. 	Executive Compensation 	84
Item 12. 	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 	84
Item 13. 	Certain Relationships and Related Transactions, and Director Independence 	85
Item 14. 	Principal Accountant Fees and Services 	85
Part IV
Item 15. 	Exhibits and Financial Statement Schedules 	86
Item 16. 	Form 10-K Summary 	86
Exhibit Index 	87
Signatures 	90

-- 2 of 100 --

Table of Contents
1
PART I
Special Note Regarding Forward-Looking Statements
Throughout this report, or in other reports or registration statements filed from time to time with the Securities and Exchange Commission
under the Securities Exchange Act of 1934, or under the Securities Act of 1933, as well as in documents we incorporate by reference herein or
here-from, or in press releases or oral statements made by our officers or Regulation FD authorized representatives, we may make statements
that express our opinions, expectations, or projections regarding future events or future results, in contrast with statements that reflect present
or historical facts. These predictive statements, which we generally precede or accompany by such typical conditional words as "anticipate,”
"intend,” "believe,” "estimate,” "plan,” "seek,” "project” or "expect,” or by the words "may,” "will,” or "should,” are intended to operate as
"forward-looking statements” of the kind permitted by the Private Securities Litigation Reform Act of 1995, incorporated in Section 27A of the
Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Such forward-looking statements involve both known and
unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from
any future results, performance or achievements expressed or implied by such forward-looking statements. That legislation protects such
predictive and cautionary statements by creating a "safe harbor” from liability in the event that a particular prediction does not turn out as
anticipated.
While we always intend to express our best judgment when we make statements about what we believe will occur in the future, and
although we base these statements on assumptions that we believe to be reasonable when made, these forward-looking statements are not a
guarantee of performance, and you should not place undue reliance on such statements. Forward-looking statements are subject to many
uncertainties and other variable circumstances, many of which are outside of our control, that could cause our actual results and experience to
differ materially from those we thought would occur.
The following listing represents some, but not necessarily all, of the factors that may cause actual results to differ from those we may
have anticipated or predicted:
Global and National Risks
● domestic and global economic factors including periods of slower than anticipated economic growth and the risk of a recession;
● global steelmaking overcapacity and imports of steel into the United States, together with increased scrap prices;
Industry Risks
● the cyclical nature of the metals industries and some of the industries we serve;
● volatility and major fluctuations in prices and availability of scrap metal, scrap substitutes and supplies, and our potential
inability to pass higher costs on to our customers;
● cost and availability of electricity, natural gas, oil and other energy resources are subject to volatile market conditions;
● increased environmental, greenhouse gas emissions and sustainability considerations from our customers and investors or
related regulations;
● compliance with and changes in environmental and remediation requirements;

-- 3 of 100 --

Table of Contents
2
Operational and Commercial Risks
● significant price and other forms of competition from other steel and aluminum producers, scrap processors and alternative
materials;
● availability of an adequate source of supply of scrap for our metals recycling operations;
● cybersecurity threats and risks to the security of our sensitive data and information technology;
● the implementation of our growth strategy;
● our ability to retain, develop and attract key personnel;
● litigation and legal compliance;
● unexpected equipment downtime or shutdowns;
● difficulties in the launch or production ramp-up of new products;
● our aluminum operations depend on a core group of significant customers;
● governmental agencies may refuse to grant or renew some of our licenses and permits required to operate our businesses;
● our existing debt agreements contain, and any future financing agreements may contain, restrictive covenants that may limit our
flexibility; and
● the impact of impairment charges.
We also refer you to and urge you to carefully read the section entitled Risk Factors at Item 1A of this report to better understand some
of the principal risks and uncertainties inherent in our businesses or in owning our securities, as well as the section entitled Management’s
Discussion and Analysis of Financial Condition and Results of Operations at Item 7. You should also review the notes to consolidated
financial statements under headings in Note 1. Use of Estimates and in Note 8. Commitments and Contingencies.
Any forward-looking statements which we make in this report, or in any of the documents that are incorporated by reference herein or
here-from, speak only as of the date of such statement, and we undertake no ongoing obligation to update such statements. Comparisons of
results between current and any prior periods are not intended to express any future trends or indications of future performance, unless
expressed as such, and should only be viewed as historical data.

-- 4 of 100 --

Table of Contents
3
ITEM 1. 	BUSINESS
Steel Dynamics, Inc. is a leading industrial metals solutions company, with facilities located throughout the United States and Mexico.
The company operates a circular manufacturing model, producing high-quality, lower-carbon-emission products with recycled scrap as the
primary input. Steel Dynamics is one of the largest domestic steel producers and metals recyclers in North America based on estimated
steelmaking and steel coating capacity of approximately 16 million tons and actual metals recycling volumes as of December 31, 2025, with one
of the most diversified product and end market portfolios in the domestic steel industry, combined with a meaningful downstream steel
fabrication platform. The company also has aluminum operations, further diversifying its product offerings to supply aluminum flat rolled
products with higher recycled content to the countercyclical, sustainable beverage can industry, as well as the automotive and industrial
sectors. The company’s primary sources of revenue are currently derived from the manufacture and sale of steel products, the processing and
sale of recycled ferrous and nonferrous metals, and the fabrication and sale of steel joist and deck products.
We refer to our founding principles as our six core strategic pillars. These pillars unify our teams around a common focus and provide the
foundation for how we operate and grow. Our unique entrepreneurial culture and business model create operational and financial advantages
and support the responsible use of resources across diverse economic environments. Innovation in all forms is essential to our success, and
our teams focus on working smarter within existing operations while pursuing opportunities for continued growth. This includes developing
solutions for our teammates, customers, suppliers, and other stakeholders, as well as finding ways to operate with fewer resources and less
environmental impact. The consistent execution of our six strategic pillars drives our long-term success and sustainability.
● Health & Safety – Safety is our primary focus and core value. Nothing surpasses the importance of creating and maintaining a
safe work environment. Our goal is zero injuries—no accidents.
● Entrepreneurial Culture – Fosters a team of energetic, positive, driven, innovative and diverse individuals by utilizing open
communication and meaningful performance-based compensation aligned to our strategic focus.
● Customer Commitment – We focus on being a preferred partner of our customers by providing quality products and unique
supply chain solutions to meet their current and future needs.
● Strategic Sustainable Growth – We focus on strategic growth with intentional margin expansion and consistency through-the-
cycle.
● Innovation – Through individual creativity and ingenuity, our teams drive innovation to improve safety, quality, productivity,
and resource sustainability. We strive to provide unique, superior products, customer supply chain solutions, and next-
generation technologies and processes.
● Financial Strength – Through our adaptable value-added product diversification, vertically connected businesses model, highly
variable operating cost structure and performance-based incentive compensation, along with our continued operating
innovations and efficiency, we achieve higher utilization and lower costs, which provide strong cash flow generation through
both strong and weak market cycles.
Differentiated Model - Uniquely Steel Dynamics
Competitively advantaged differentiation is central to our long-term value creation strategy. We distinguish ourselves across all aspects
of our business through an overarching culture of excellence that drives how we operate, innovate, and serve our customers.

-- 5 of 100 --

Table of Contents
4
Unique Entrepreneurial Culture
Our entrepreneurial culture is the foundation of our success and is driven by our extensive, performance-based incentive compensation
philosophy that spans from teammates on the plant floor to senior leadership. More than 60% of a production team member’s total potential
compensation is "at risk” and tied to quality production and cost-effectiveness metrics. More than 85% of our senior leadership team’s total
potential compensation is "at risk” and linked to companywide financial metrics that encourage long-term value creation, including return on
equity, growth, cash generation, and return on invested capital. We believe diversity within our teams enhances broad-based thinking,
innovation, and value creation. Our common goal of consistently achieving excellence in all we do is reflected in the esprit de corps that
permeates our team.
Diversified, Value-Added Product Offerings and Supply-Chain Solutions
We have one of the most diversified, high-margin product portfolios in the domestic steel industry and a proven track record of profitable
growth. We have driven diversification across both end markets and value-added product offerings to sustain higher volumes and
profitability through varying market environments. Approximately 70% of our steel and steel fabrication sales are considered value-added.
Throughout our history and today, we have focused on providing differentiated supply-chain solutions that help our customers increase
efficiency, reduce time and costs, and support decarbonization opportunities. Growing alongside our customers in this way has been
instrumental in building long-lasting relationships and advancing product development.
The majority of our scrap consuming operations are located near sustainable sources of scrap metal and close to our customer base,
creating freight savings on inbound scrap and outbound finished products. This proximity also allows us to provide consistent, on-time
delivery with relatively short lead times, further strengthening our customer relationships.
This diversified product portfolio enables us to access a broad range of markets and serve a large customer base, while helping to mitigate
exposure to any single product or end market and supporting higher through-cycle mill utilization. Our value-added product offerings also
help balance our exposure to commodity grade products supplied by other manufacturers.
We will continue to seek additional opportunities, including our entry into the recycled aluminum flat rolled products market, and
collaborating with our customers to anticipate their future needs by further expanding our range of products and offerings. As with all of our
growth initiatives, we seek to competitively differentiate ourselves through service, product capability and quality, and integrated supply-
chain solutions.
Vertically Connected Businesses and Pull-Through Volume Advantage
Our vertically connected businesses support our higher through-cycle steel production and overall profitability. Our internal
manufacturing operations provide a significant competitive advantage by contributing to more stable through-cycle earnings and cash flow
generation. Our steel fabrication operations and downstream processing facilities consume significant volumes of steel. During weaker steel
demand environments, we can source their steel needs internally, and during stronger steel demand environments, we may also purchase steel
externally. Ultimately, we optimize our companywide profitability and minimize earnings volatility. In 2025, our own steel consuming
businesses purchased 1.8 million tons of steel from our steel mills, representing 13% of our total 2025 steel shipments.
A strategic and synergistic relationship exists between our electric arc furnace (EAF) steel mills and our metals recycling operations, as
well as between our aluminum operations and our metals recycling operations. Our metals recycling platform is the largest supplier of recycled
ferrous scrap to our steel operations and the largest supplier of recycled aluminum scrap to our aluminum operations. This circular model
allows us to reduce companywide working capital, as lower scrap inventory volume is required at our steel mills and aluminum operations. We
are also able to source higher-quality scrap for our steel mills and aluminum operations, increasing availability, optimizing costs, and
improving quality.

-- 6 of 100 --

Table of Contents
5
Technologically Advanced, Low-Cost, Highly Efficient Operations
We have some of the most technologically advanced and environmentally responsible steel mills and aluminum operations in the world.
Our steel mills generate a fraction of the greenhouse gas (GHG) emissions per ton of steel produced as compared to traditional blast furnace
steel production and the average global steel industry. Our value-added product diversification, circular manufacturing model, and
performance-based incentive compensation programs support our efficient, environmentally responsible, and competitively advantaged
footprint. Coupled with our low, highly variable cost structure and our continued operating innovation and efficiency, we are one of the most
profitable and lowest-cost domestic metals solutions companies.
Sustainability
Our commitment to all aspects of sustainability is embedded in our founding principles, which emphasizes valuing our people, our
partners, our communities, and our environment. These strategic principles guide long-term value creation for all of us. We are committed to
operating our business in an environmentally responsible manner and have been since our founding. Our steel mills exclusively use EAF
steelmaking technology, which uses recycled ferrous scrap as the primary raw material. Our new recycled aluminum flat rolled products mill
uses recycled aluminum scrap as its primary raw material and is engineered to provide an energy-efficient, lower-environmental-impact product
alternative compared to average aluminum flat rolled production. These investments allow us to produce high-quality, lower-embodied-carbon
steel and aluminum products for our customers and drive returns for our shareholders. Our sustainability and decarbonization strategy is an
ongoing journey, and we plan to use our entrepreneurial, innovative spirit to continue to be a leader in the industry.
We have intentionally developed a circular manufacturing model. Our metals recycling platform collects and processes scrap, which is
then sold to end users for reuse, including our EAF steel mills and our aluminum operations. Our steel and aluminum products are then sold to
consumers that both further process and manufacture end products. We sell a meaningful amount of steel to our own manufacturing
businesses that in turn sell finished products to consumers. Scrap, from the industrial manufacturing process, and from when these products
ultimately reach the end of their lives, can be collected and used again in our steel and aluminum operations, creating our circular
manufacturing model.
While we believe we operate some of the most efficient steel mills in the world, we recognize the need for continuous improvement. Our
biocarbon production facility located in Columbus, Mississippi uses high-temperature pyrolysis to convert sustainably sourced biomass to
high-purity biocarbon. We plan to use this biocarbon as a renewable replacement for anthracite in our steelmaking operations, which could
result in as much as a 35% reduction in our steel mills’ Scope 1 GHG absolute emissions. The facility began operations in the second half of
2025. This investment represents a significant step toward the decarbonization of our steel mills.
Experienced Leadership Team / Fosters an Entrepreneurial Culture
Our senior leadership team is highly experienced and has a proven track record in the steel, metals recycling, and steel fabrication
industries, as well as building and operating low-cost melting, casting and rolling facilities, such as our recycled aluminum flat rolled products
mill. Our leadership objectives are closely aligned with our shareholder interests through meaningful stock ownership and performance-based
incentive compensation programs that are tied to the company’s profitability and operational performance in relation to our steel
manufacturing peers. We emphasize decentralized operational decision making and accountability, while maintaining appropriate corporate
governance and risk oversight. We reward teamwork, innovation, and operating efficiency, and focus on maintaining the effectiveness of our
performance-driven incentive bonus plans designed to maximize overall productivity and align the interests of our leadership and teams with
our shareholders.

-- 7 of 100 --

Table of Contents
6
Name 	Age 	Position
Mark D. Millett 	66 	Co-founder, Chairman, and Chief Executive Officer
Barry T. Schneider 	57 	President and Chief Operating Officer
Theresa E. Wagler 	55 	Executive Vice President, Chief Financial Officer, and Corporate Secretary
Miguel Alvarez 	58 	Senior Vice President, Aluminum Group
James S. Anderson 	65 	Senior Vice President, Long Products Steel Group
Chris A. Graham 	61 	Senior Vice President, Flat Roll Steel Group
Richard A. Poinsatte 	59 	Senior Vice President and Treasurer
Matt Bell 	49 	Vice President, Metals Recycling
Chad Bickford 	46 	Vice President, Steel Fabrication
Mark D. Millett co-founded the Company in 1993. Mr. Millett has been our Board Chair since May 2021 and has been our Chief Executive
Officer since January 2012. Prior to that, he held various positions within the Company, including President and Chief Operating Officer,
Executive Vice President of Metals Recycling and Ferrous Resources, and Executive Vice President of Flat Roll Operations. Mr. Millett was
responsible for the design, construction, and start-up operation of all of our steel mills, including our Butler, Indiana flat roll, melting, and
casting operations. Mr. Millett earned his bachelor’s degree in metallurgy from the University of Surrey, England. Mr. Millett is a Past
Chairman of the Steel Manufacturers Association (SMA). In 2019, he was the recipient of the James F. Collins Achievement in Advocacy
Award by the SMA. In 2014 and 2022, Mr. Millet was named Steelmaker of the Year by the Association for Iron & Steel Technology. In 2024,
he received the Willy Korf / Ken Iverson Steel Vision Award for his significant contributions to the steel industry while promoting goodwill
and integrity. In 2025, Mr. Millett received Harbor Aluminum’s Gene Greenberg 2025 World’s Aluminum Executive of the Year Award, an
award that honors leaders with integrity who have made significant contributions to technically improve and/or disrupt the aluminum industry
for the better. Also in 2025, Mr. Millett was the recipient of the Bessemer Gold Medal, a Premier Award from the Institute of Materials,
Minerals & Mining, honoring those who have contributed significantly to the steel industry.
Barry T. Schneider has been our President and Chief Operating Officer since March 2023. Mr. Schneider is responsible for the company’s
steel platform, steel fabrication platform, and metals recycling platform, and oversees information technology and innovation. Prior to that, Mr.
Schneider served as Senior Vice President, Flat Roll Steel Group, responsible for the company’s entire flat roll steel operations, including the
company’s three flat roll steel mills and numerous flat rolled processing, coating, and distribution operations. Mr. Schneider has been with
Steel Dynamics since 1995, serving in various operational and leadership roles within the company’s steel operations, including our
Engineered Bar Products Division and Butler Flat Roll Division. He was also a part of the team that constructed the company’s first steel mill
in Butler, Indiana. Mr. Schneider earned a bachelor's degree in mechanical engineering and a master of science in engineering management
from Rose-Hulman Institute of Technology. He also received an Executive Certificate in Technology, Operations, and Value Chain
Management from the MIT Sloan School of Management. In addition, Mr. Schneider is the Chairman of the Steel Manufacturers Association
and served as a Past President for the Association for Iron & Steel Technology.
Theresa E. Wagler has been our Executive Vice President, Chief Financial Officer, and Corporate Secretary since May 2007. Ms. Wagler
joined the Steel Dynamics corporate finance team in 1998, and has held various finance and accounting positions, including Chief Accounting
Officer and Vice President – Corporate Controller. She is responsible for and oversees accounting and taxation, treasury, risk management,
legal, cybersecurity, human resources, decarbonization strategy, and strategic business development functions, as well as, financial planning
and analysis, investor relations, and corporate communications. Ms. Wagler also has various operational responsibilities directly overseeing
several operating joint ventures. Prior to joining Steel Dynamics, Ms. Wagler was a certified public accountant with Ernst & Young LLP. Ms.
Wagler graduated cum laude from Taylor University with a bachelor’s degree in accounting and systems analysis. In addition, she serves as a
director, member of the audit committee, and a member of the environmental sustainability and community committee of CF Industries
Holdings, Inc., a public company, and also serves as a trustee for Trine University and a director for the Metals Service Center Institute.
Miguel Alvarez was appointed Senior Vice President, Aluminum Group in October 2025. Mr. Alvarez is responsible for new strategic
aluminum investments, as well as an ancillary recycled aluminum deox-rod facility. Beginning in

-- 8 of 100 --

Table of Contents
7
March 2022, Mr. Alvarez served as Senior Vice President, Metals Recycling and was responsible for leading Omni’s ferrous and nonferrous
metals recycling operations, including marketing, trading, and logistics activities. Mr. Alvarez joined the company in 2019 as Senior Vice
President, Southwest United States and Mexico and was responsible for the comprehensive business development and partnerships in the
regions, encompassing both steel and recycled metals. Prior to joining Steel Dynamics, Mr. Alvarez served in leadership positions at
BlueScope; this included leading BlueScope’s North American metal buildings business with manufacturing facilities in the United States and
Mexico and being responsible for BlueScope’s only North American electric arc furnace flat roll steel mill as President of North Star BlueScope
Steel. Mr. Alvarez earned a bachelor’s degree in industrial engineering and an MBA from Tecnológico de Monterrey, México.
James S. Anderson has been our Senior Vice President, Long Products Steel Group since May 2024. Mr. Anderson is responsible for the
company’s four long product steel mills, along with a downstream finishing operation and the company’s copper rod manufacturing facility.
Prior to that, Mr. Anderson served as our Senior Vice President, Steel Fabrication and was responsible for the company’s steel fabrication
operations, comprised of seven steel joist and deck manufacturing facilities located throughout the U.S. and Mexico. Before that, Mr.
Anderson held numerous operational and leadership roles including Vice President, Steel Fabrication, Chief Operating Officer of New
Millennium Building Systems, and general manager of The Techs three flat roll steel galvanizing lines. Mr. Anderson earned a bachelor's
degree in metallurgical engineering from Grove City College and an MBA from the University of Pittsburgh.
Christopher A. Graham has been our Senior Vice President, Flat Roll Steel Group since October 2023. Mr. Graham is responsible for the
company’s entire flat roll steel operations, including three flat roll steel mills and numerous flat roll steel processing, coating, and distribution
operations. Prior to that, Mr. Graham served as our Senior Vice President, Long Products Steel Group. In this role, Mr. Graham was responsible
for the company’s four long product steel mills, along with a downstream finishing operation and the company’s copper rod manufacturing
facility. Prior to that, Mr. Graham served as Senior Vice President, Downstream Manufacturing and President of New Millennium Building
Systems, responsible for the company’s steel fabrication and downstream manufacturing operations. Mr. Graham has been with Steel
Dynamics since 1994, holding various operational and leadership roles within both steel fabrication and steel operations, and was part of the
team that constructed the company’s first steel mill in Butler, Indiana in 1994. Mr. Graham earned a bachelor's degree in business management
from Western Governors University and an MBA from the University of Saint Francis. In addition, Mr. Graham completed the Harvard
Advanced Management Program in 2017.
Richard A. Poinsatte was appointed Senior Vice President in October 2023 as Treasurer and is responsible for the areas of treasury, legal,
business development, cybersecurity, and risk. Mr. Poinsatte joined Steel Dynamics in 2000, as the Chief Financial Officer of one of the
company’s joint venture businesses, which is now part of the steel fabrication platform. During his time with Steel Dynamics, he has held
positions of increasing responsibility, including the operating position of General Manager of the company’s Florida steel fabrication plant.
Since 2008, he has served as Vice President and Treasurer and has been responsible for the company’s treasury, risk, and legal applications.
Mr. Poinsatte earned a Bachelor of Business Administration with a concentration in accounting from the University of Notre Dame, and he is a
certified public accountant. In addition, Mr. Poinsatte serves as the Chairman of the Board of Trustees for the University of Saint Francis.
Matt Bell was appointed Vice President, Metals Recycling in November 2025. Mr. Bell is responsible for Omni’s ferrous and nonferrous
metals recycling operations, including marketing, trading and logistics activities. Beginning in 2023, Mr. Bell served as Vice President of
Commercial for Omni, responsible for developing and implementing its ferrous purchasing and sales growth strategies, including optimizing
the scrap supply for the company’s steel operations. Since joining the company in 2016, Mr. Bell has held increasingly impactful leadership
roles within the metals recycling platform in operations, commercial, and marketing responsibilities, including Southwest Commercial Manager
from 2020 to 2022 and Ferrous Trading Manager until 2023. Prior to joining the company, he held various leadership positions in the metals
recycling industry. Matt is an alumnus of the Executive Education Program at the University of Texas McCombs School of Business as well as
the Emerging Leaders Program at Northwestern University’s Kellogg School of Management.
Chad Bickford has been our Vice President, Steel Fabrication since May 2024. Mr. Bickford is responsible for the company’s steel
fabrication operations, New Millennium Building Systems, comprised of seven steel joist and deck

-- 9 of 100 --

Table of Contents
8
manufacturing facilities located throughout the United States and Mexico. Beginning in 2023, Mr. Bickford served as General Manager for the
company’s Butler Flat Roll Division and prior to that he served as General Manager for the company’s Engineered Bar Products Division. Mr.
Bickford has been with Steel Dynamics since 2003, holding various operational and leadership roles with increasing responsibility in both steel
and steel fabrication operations, including General Manager of the Virginia steel fabrication facility. Mr. Bickford earned a bachelor’s degree in
civil engineering from Ohio University.
Human Capital / Valuing People
We value the dedicated people whose passion, innovation, and spirit of excellence have helped successfully grow our company and
serve our customers. Our culture of trust is fostered through individual empowerment and accountability that drives decision making
throughout our organization. We empower our teams by setting clear performance goals, aligning their interests with the company’s long-term
strategy, and providing the right tools and resources needed to succeed. Our performance-based incentive compensation programs align with
our strategic long-term growth objectives and the interests of our customers, communities, and shareholders. We believe trust is reinforced
through effective communication and transparency, and we are confident our teams will do what is right. The Steel Dynamics team consisted
of approximately 14,400 full-time team members at December 31, 2025.
Health and Safety
Valuing people includes providing a healthy and safe work environment and fostering a culture of safety that extends beyond the
workplace, into our homes and communities. Safety is, and always will be, our primary focus and core value. Our goal is for every individual to
arrive at the workplace safely and return home safely each day. Achieving this requires commitment from leadership and team members at
every level to take ownership and responsibility for their safety and the safety of others. Under no circumstance does the pursuit of maximized
production or earnings override the importance of individual safety.
Safety is our first core strategic pillar and the foundation of our decision making. Safety is always at the forefront and is discussed
regularly across the company, whether led by a plant-floor team member, supervisor, or manager. Our leadership team is engaged and
continuously evaluates opportunities for improvement. We believe that engaging every individual will lead to zero injuries and we are
committed to achieving world-class safety performance across our operations. This commitment is foundational and integral to our culture and
how we operate.
Our total recordable injury rate compared to industry benchmarks and lost time injury rates for 2025 are as follows:

-- 10 of 100 --

Table of Contents
9
1 Total Recordable Injury Rate is defined as OSHA recordable incidents x 200,000 / hours worked. Lost Time Injury Rate is defined as OSHA
days away from work cases x 200,000 / hours worked.
2 Source: 2024 U.S. DOL Bureau of Labor Statistics released in 2026.
Compensation Structure
We believe in empowering our teams and rewarding them for their achievements through a four-tiered, performance-based compensation
framework. The components of our compensation programs are designed to balance high-return growth, disciplined capital investment, low-
cost operations, and effective risk mitigation. By rewarding our teams based on their performance at the individual, team, company, and
shareholder levels, we believe our compensation structure achieves strong alignment with the interests of our external constituents.
This alignment is achieved through the following methods:
● Individual performance awards consist of an individual’s base compensation, which is determined by their individual superior
performance, responsibilities, and skill level.
● Team performance awards, such as quality production, return on assets, and conversion bonuses, are based on departmental
results, focusing on productivity, cost control, and efficient use of assets.
● Companywide performance awards unite everyone through our profit-sharing program, which is based on consolidated pretax
profitability, and our 401(k) match, which is based on consolidated return on assets.
● Alignment with our shareholders and the pursuit of long-term value creation is fostered through the issuance of restricted stock
units. Each full-time, non-union, United States-based team member receives annual equity awards. These awards generally have
a two-year vesting period, supporting retention and companywide strategy alignment.
Our team-based culture and competitive pay structure support continued high retention. In 2025, our companywide team retention was
approximately 83%, with U.S.-based teams retention of 89%. Our compensation framework helps ensure that we remain strong with best-in-
class performance and retain top talent even in economic downturns. We all share in the company’s successes, as well as the challenges.

-- 11 of 100 --

Table of Contents
10
Talent Development and Educational Opportunities
Our people are the foundation of our six strategic pillars, and their continued education and talent development are essential to our
success. Our educational assistance and development programs support personal growth by helping individuals remain current in their areas
of responsibility while developing new skills for advancement. Senior leadership plays a key role in our development programs, reinforcing
our culture and connecting it to proven leadership principles.
As we continue to grow, building internal talent, retaining team members with relevant industry and technical experience, and creating
advancement opportunities within our organization remain among our most important priorities and are critical to our long-term success.
Workplace Philosophy
Our people are the foundation of our success and are our most important resource. Our culture is built on safeguarding all individuals and
ensures everyone is treated fairly, with dignity and respect. We provide equal employment opportunity, and all employment-related decisions
are based on merit, qualifications, and ability. We do not tolerate harassment or disrespect of any kind.
We respect human rights by providing safe work environments, providing fair compensation based on job responsibilities and
performance, and ensuring all team members meet minimum age and eligibility requirements for employment. Our leadership receives recurring
training on these critical topics.
We recognize the value of having a business that reflects a variety of backgrounds and experiences. We work together as a unified team
while respecting each other as individuals. Our team-based compensation structure reinforces this philosophy. We strive to foster a
welcoming and open environment in which the best ideas are heard and valued, regardless of position or individual. We believe these
principles will continue to drive our success. Our team member population is representative of our industry and the communities where we live
and work.
Segments
Refer to Notes 1 and 12 in the notes to consolidated financial statements in Part II, Item 8 of this Form 10-K for additional segment
information.

-- 12 of 100 --

Table of Contents
11
Steel Operations Segment
Our steel operations consist of electric arc furnace steel mills that produce steel from ferrous scrap and scrap substitutes, using
continuous casting and automated rolling mills, along with numerous steel coating, processing, and warehouse operations. Our steel
operations sell directly to end users, steel processors, steel fabricators, and service centers. These products are used across a broad range of
end markets, including construction, automotive, manufacturing, transportation, heavy and agricultural equipment, energy, and pipe and tube
markets, including oil country tubular goods ("OCTG”).
Our steel operations accounted for 72%, 69%, and 67% of our consolidated net sales during 2025, 2024, and 2023, respectively. We are
predominantly a domestic steel company. Export sales represented approximately 4%, 6%, and 8% of our steel segment net sales during 2025,
2024, and 2023, respectively.
Our steel operations consist primarily of steelmaking and a broad range of coating operations. In 2025, we had approximately 9.4 million
tons of annual flat roll steel production capacity. We also had 2.0 million tons of flat roll steel processing capacity through The Techs and our
Heartland Flat Roll Division. Through United Steel Supply ("USS”) and New Process Steel, L.P. ("NPS”) (acquired December 1, 2025), we also
have distribution and processing of metallic coated and pre-painted products. In addition, we had annual flat roll galvanizing capability of 5.5
million tons and painting capability of 2.0 million tons. Our long products divisions had approximately 4.6 million tons of annual steel
production capacity.
Capacities represent maximum estimated manufacturing capabilities based on steel mill configuration and related team member support
and do not reflect expected production volumes in any given year. Estimates of steel mill capacity are also highly dependent on product mix.
Each of our steel mills is capable of producing a wide range of products and sizes; accordingly, capacity estimates assume a typical product
mix.

-- 13 of 100 --

Table of Contents
12
The following chart summarizes our steel operations primary products and the estimated percentage of tons sold by end market:

-- 14 of 100 --

Table of Contents
13
SHEET STEEL PRODUCTS
Our sheet steel products, consisting of hot rolled, cold rolled and coated steel products are produced by our Butler, Columbus, and
Sinton Flat Roll Divisions, and our numerous downstream coating lines, including The Techs and the Heartland Flat Roll Division. Distribution
and steel processing is provided through USS and NPS. Our sheet steel operations represented 64%, 72%, and 68% of steel operations net
sales in 2025, 2024, and 2023, respectively. We produced 10.0 million tons of sheet steel at these facilities in 2025, 9.5 million tons in 2024, and
9.2 million tons in 2023.
We shipped the following volumes of sheet steel products (net tons):
2025 	2024 	2023
Butler, Columbus, and Sinton 	8,115,111 	7,702,731 	7,459,023
Flat Roll divisions
Steel Processing divisions 	2,071,765 	1,779,429 	1,731,911
The following chart summarizes sheet steel product sales by product type, based on sales dollars, during the respective years. Cold rolled
and coated products are considered value-added products:
Customers. Steel processors and service centers typically act as intermediaries between primary sheet steel producers and end-user
manufacturers that require additional processing of hot-rolled coils. Processing performed by these intermediaries includes pickling,
galvanizing, cutting to length, slitting, leveling, blanking, shape correcting, edge rolling, shearing, and stamping. We believe steel processors
and service centers will continue to be an integral part of our customer base.
Our Columbus and Sinton Flat Roll Divisions enable us to capitalize on industrial markets in the Southern United States and Mexico and
to further expand our customer base for painted products, line pipe, and other pipe applications. Galvanized flat rolled products produced by
our Butler, Columbus, and Sinton Flat Roll Divisions are similar and are sold to a generally similar customer base.

-- 15 of 100 --

Table of Contents
14
The Techs and the Heartland Flat Roll Division specialize in the galvanizing and painting of specific types of flat rolled steel, primarily for
non-automotive applications, serving customers in the heating, ventilation, and air conditioning ("HVAC”), construction, agriculture, and
consumer goods markets.
USS and NPS provide complementary distribution channels for metallic-coated and pre-painted flat rolled steel coils and steel processing
capabilities, including slitting, blanking, cutting to length, stamping and fabrication services. USS primarily serves roll-former customers in the
roofing and siding industry, while also expanding our reach to customers that have not historically purchased steel directly from a primary
steel producer. NPS serves a wide range of customers, including those in agriculture, appliance, automotive, and construction industries, as
well as other markets.
Our sheet steel operations also provide a substantial portion (62% in 2025) of the sheet steel utilized in our steel fabrication operations.
The following chart summarizes the types of end customers who purchased our sheet steel products, by sales dollars, during the
respective years:
LONG PRODUCTS
Our long steel products consist of a broad range of differentiated products produced by our four mills, as well as Vulcan Threaded
Products, Inc. ("Vulcan”), a downstream finishing operation.
Structural and Rail Division produces a variety of parallel flange beams and channel sections, as well as large unequal leg angles, and
reinforcing steel bar including custom cut-to-length, smooth bar, and coiled. We also produce standard strength carbon, intermediate alloy
hardness, and premium grade rails in 40 to 320 feet length for the railroad industry. Our state-of-the art heat treating system allows us to
produce high quality premium rail, which has been certified by all Class I railroads. In addition, our rail-welding facility has the ability to weld
(Continuous Welded Rail) in lengths up to 1,650 feet, which offers substantial savings to the railroads both in terms of initial capital cost and
through reduced maintenance. We also utilize our Structural and Rail Division’s excess capacity to supply our Engineered Bar Products
Division with pull-through volume of billets to utilize its excess rolling capacity.

-- 16 of 100 --

Table of Contents
15
Engineered Bar Products Division produces a broad range of engineered special-bar-quality (SBQ), merchant-bar-quality (MBQ), and
other engineered round steel bars. We also have a bar finishing facility, which provides various downstream finishing operations for SBQ
steel bars, including turning, polishing, straightening, chamfering, precision saw-cutting, and heat-treating capabilities. Vulcan produces
threaded rod products, and cold drawn and heat-treated bar, creating strategic pull-through demand of our Engineered Bar Products
Division’s special-bar-quality products.
Roanoke Bar Division produces merchant products, including channels, angles, flats, merchant rounds, and reinforcing steel bars. Excess
steel billet production is sold to mills without sufficient melting capacities, including our Steel of West Virginia facility. Our steel fabrication
operations also purchase angles from our Roanoke Bar Division.
Steel of West Virginia produces a wide array of specialty shapes and light structural steel and frequently performs fabrication and
finishing operations on those products, such as cutting to length, additional straightening, hole punching, shot blasting, plasma cutting,
welding, galvanizing, and coating. Through this array of products and additional finishing, we create custom finished products that are
generally placed directly into our customers’ assembly operations.
We shipped the following long products volumes at each of these facilities (net tons):
2025 	2024 	2023
Structural and Rail Division 	1,842,616 	1,625,913 	1,851,349
Rail shipments (included above) 	257,547 	254,203 	319,241
Engineered Bar Products Division 	730,691 	714,509 	836,179
Roanoke Bar Division 	593,290 	516,258 	564,776
Steel of West Virginia 	395,328 	321,647 	378,515
Customers. The principal customers for our structural steel products are steel service centers, steel fabricators and various manufacturers.
Service centers provide key distribution channels for the mills and value-add services to the end-user. The steel rail marketplace in the United
States, Canada, and Mexico is specialized and defined, with seven Class I railroads and a large distribution network.
SBQ products are principally consumed by cold finishers, forgers, intermediate processors, OEM manufacturers, steel service centers, and
distributors, as well as pull-through volume to Vulcan. Our MBQ products are sold primarily to steel service centers, as well as reinforcing
steel bar distributors, joist producers (such as our New Millennium Building Systems), and OEMs. Some of the excess steel billet production at
the Roanoke Bar Division is sold to mills without sufficient melting capacities, including our Steel of West Virginia facility. Our steel
fabrication operations also purchase angles from Roanoke Bar Division. Steel of West Virginia’s customers are primarily OEMs producing
solar panel structures, truck trailers, industrial lift trucks, merchant products, guardrail posts, manufactured housing, mining, and off-highway
construction equipment. Steel of West Virginia’s flexible manufacturing capabilities enable us to meet demand for a variety of custom-ordered
and designed products. Many of these products are produced in small quantities for low volume end-uses resulting in a wide variety of
customers, the largest of which are in the truck trailer and industrial lift truck industries.
Steel Operations Segment Competition
The markets in which we conduct business are highly competitive with an abundance of competition in the carbon steel industry from
North American and foreign integrated and mini-mill steelmaking and processing operations. We compete in numerous industry sections, most
significantly tied to the construction, automotive, and other manufacturing sectors. In many applications within these industry sections, steel
competes with other materials, such as aluminum, cement, composites, plastics, carbon fiber, glass, and wood. Some of our products are
commodities, subject to their own cyclical fluctuations in supply and demand. However, we are focused on providing a broad range of
diversified value-added products that de-emphasize commodity steel. The primary competitive influences on products we sell are price,
quality, and value-added services.

-- 17 of 100 --

Table of Contents
16
Metals Recycling Operations Segment
Metals Recycling operations include both ferrous and nonferrous scrap metal processing, transportation, marketing, brokerage, and scrap
management services, strategically located in close proximity to our steel mills and our aluminum operations and other end-user scrap
consumers, throughout North America. Our metals recycling operations accounted for 11% of our consolidated net sales during 2025, 2024
and 2023. Export sales represented 14%, 17%, and 19% of metals recycling segment net sales during 2025, 2024, and 2023, respectively.
We shipped the following from our metals recycling operations:
2025 	2024 	2023
Ferrous metal total (gross tons) 	6,160,797 	5,850,544 	5,792,484
Shipments to our steel mills 	4,013,035 	3,656,034 	3,593,328
Percent of total to our steel mills 	65% 	62% 	62%
Nonferrous metals (thousands of pounds) 	916,502 	965,491 	970,445
We sell various grades of processed ferrous scrap primarily to steel mills and foundries. Ferrous scrap metal is the primary raw material for
EAFs, including our steel mills. In addition, we sell various grades of nonferrous metals including copper, brass, aluminum, and stainless steel,
to smelters, refineries, alloy manufacturers, specialty mills and other consumers, including our aluminum operations.
We purchase processed and unprocessed ferrous and nonferrous scrap metals in a variety of forms for our metals recycling facilities.
Ferrous scrap comes from two primary sources:
● Manufacturing industrial facilities, metal fabrication plants, and machine shops, which generate ferrous scrap referred to as
prompt or industrial scrap, and
● Scrap dealers, retail individuals, auto wreckers, demolition firms and others who provide steel and iron scrap, referred to as
obsolete scrap. Obsolete scrap includes scrap recycled from end-of-life items, such as automobiles, appliances, and machinery.
Nonferrous scrap comes from three primary sources:
● Manufacturers and other nonferrous scrap sources, which generate or sell scrap aluminum, copper, stainless steel, and other
nonferrous metals,
● Producers of items such as electric wire, telecommunication service providers, aerospace, defense, and recycling companies that
generate nonferrous scrap consisting primarily of aluminum used beverage cans, copper wire, and various other metals and
alloys, and
● Retail transactions conducted with the general public who sell material directly to our facilities, collected from a variety of
sources and other independent scrap dealers.
We do not purchase a significant amount of scrap metal from a single source or from a limited number of major sources. Market demand
and the composition, quality, size, weight, and location of the materials are the primary factors that determine prices.
Products. Our metals recycling operations primarily involve the purchase, processing, and resale of ferrous and nonferrous scrap metals
into reusable forms and grades. We process an array of ferrous products through a variety of methods, including sorting, shredding, shearing,
cutting, baling, and breaking. Our major ferrous products include heavy

-- 18 of 100 --

Table of Contents
17
melting steel, busheling, bundled scrap, shredded scrap, and other scrap metal products, such as steel turnings and cast iron. These products
vary in properties or attributes related to cleanness, size of individual pieces, and residual alloys. The necessary characteristics of the ferrous
products are determined by the specific needs and requirements of the consumer and affect the individual product’s relative value. We
process numerous grades of nonferrous products, including aluminum, brass, copper, stainless steel, and other nonferrous metals.
Additionally, we provide transportation logistics (truck, rail, and river barge), marketing, brokerage, and scrap management services, providing
competitive price and cost advantages to our suppliers and customers. We design, install, and manage customized scrap management
programs for industrial manufacturing companies.
Customers. We sell various grades of processed ferrous scrap to end-users, such as EAF steel mills, integrated steelmakers, foundries,
secondary smelters, and metal brokers, who aggregate materials for other large users. Ferrous scrap metal is the primary raw material for EAFs,
including our steel mills. Most of our ferrous scrap customers purchase processed scrap through negotiated spot sales contracts which
establish a quantity purchase for the month. The price we charge for ferrous scrap depends upon market demand, composition, size, weight,
and transportation costs, as well as the quality and grade of the scrap. We sell various grades of processed nonferrous scrap to end-users
such as aluminum sheet and manufacturers (including our aluminum operations), ingot manufacturers, brass and bronze ingot makers, copper
refineries, smelters, specialty steelmakers, alloy manufacturers, wire and cable producers, and utilities. The price we charge for nonferrous
scrap also depends upon market demand and pricing, transportation costs, as well as the quality and grade of the scrap.
Competition. Scrap is a global commodity influenced by conditions in a number of industrialized and emerging markets throughout Asia,
Europe, and North America. The markets for scrap metals are highly competitive, both in the purchase of raw or unprocessed scrap, and the
sale of processed scrap. With regard to the purchase of unprocessed scrap, we compete with numerous independent recyclers, as well as
smaller scrap companies engaged only in collecting obsolete scrap. In many cases, we also purchase unprocessed scrap metal from smaller
scrap dealers and other processors. Successful procurement of materials is determined primarily by the price offered by the purchaser for the
raw scrap and the proximity of our processing facility to the source of the raw scrap. Both ferrous and nonferrous scrap sell as a commodity in
both domestic and international markets, which are affected, sometimes significantly, by relative economic conditions, currency fluctuations,
and the availability and cost of transportation. Competition for sales of processed scrap is based primarily on the price, quality, and location of
the scrap metals, as well as the level of service provided in terms of reliability and timing of delivery.
We also face potential competition for sales of processed scrap from other producers of steel products, such as EAFs and integrated steel
mills, some of which, like us, are also vertically connected in the scrap metals recycling business. In addition, other steel mills may compete
with us in attempting to secure scrap supply through direct purchasing from our scrap suppliers. Scrap metal processors also face competition
from substitutes for prepared ferrous scrap, such as pig iron, pelletized iron, hot briquetted iron (HBI), direct reduced iron (DRI), and other
forms of processed iron.
The industry is highly fragmented with many small, regional, national, and global companies, which have multiple locations in areas in
which our metals recycling operations operate. No single scrap metals recycler has a significant market share in the domestic market.

-- 19 of 100 --

Table of Contents
18
Steel Fabrication Operations Segment
Our steel fabrication operations consist of seven strategically located New Millennium Building Systems plants that serve the non-
residential construction industry throughout the United States. These facilities provide a national operating footprint that enables us to reach
the entire domestic market, including large retail chains, e-commerce distribution facilities, data centers, manufacturing facilities, and schools.
Steel fabrication operations accounted for 8%, 10%, and 15% of consolidated net sales during 2025, 2024, and 2023, respectively. We sold
approximately 561,000, 607,000, and 663,000 tons of joist and deck products during 2025, 2024, and 2023, respectively.
Products. Our steel fabrication operations manufacture non-residential building components, including steel joists, joist girders, and steel
deck systems. Our joist products include standard joists and girders, as well as specialty configurations including bowstring, arched, scissor,
double-pitched, and single-pitched joists. Our deck products include roof deck, form deck, cellular deck, composite floor deck, specialty
architectural deck, floor systems, and bridge deck.
Customers and Markets. Our steel fabrication operations primarily serve non-residential steel fabricators, metal building companies,
general construction contractors, developers, property owners, brokers, and governmental entities. Our customers are located throughout the
United States. We maintain approximately one-third of the total domestic steel joist and deck market for bookings, representing approximately
2.1 million tons, 1.7 million tons, and 1.8 million tons during 2025, 2024, and 2023, respectively.
Competition. We compete with other North American joist and steel deck producers primarily on the basis of price, quality, customer
service, and proximity to customers. Our national footprint enables us to efficiently service the entire domestic non-residential construction
market, which is particularly valuable for serving national accounts such as large retail chains, distribution warehouse facilities, and data
center developers.
Aluminum Operations Segment
Our aluminum operations consist of a 650,000-metric-ton recycled aluminum flat rolled products mill in Columbus, Mississippi; two
150,000-metric-ton satellite recycled aluminum slab centers, one in Central Mexico and one under construction in the Southwest U.S.; and an
ancillary recycled aluminum deox-rod facility. The flat rolled products mill produces flat rolled aluminum coil products from aluminum scrap and
is a complementary extension of our metals recycling platform. Our product offerings will be supported by various value-added finishing lines
that are being commissioned, including two CASH (Continuous Annealing Solutions Heat Treating) lines, a can end and tab coating line, and
downstream processing and packaging lines.
The results of our aluminum operations for 2025, 2024, and 2023 largely consisted of sales from the ancillary recycled aluminum deox-rod
facility, as well as construction, start-up, and commissioning costs associated with the recycled aluminum flat rolled products mill and satellite
recycled aluminum slab centers. During the second half of 2025, the recycled aluminum flat rolled products mill produced finished products for
the industrial and beverage can markets and achieved product certifications across multiple customers. In addition, the mill also successfully
produced and qualified aluminum hot rolled coils for automotive applications. Aluminum operations accounted for 2% of our consolidated net
sales in 2025, and 1%, in each of 2024 and 2023.
Products. Our aluminum operations provide flat rolled products with high recycled content to the countercyclical, sustainable beverage
can industry, as well as the automotive and industrial sectors. Once the recycled aluminum flat rolled products mill reaches full production, we
anticipate our aluminum operations product mix will consist of approximately 45% can sheet, 35% automotive, and 20% common alloy and
industrial applications.
Customers and Markets. We have intentionally aligned the growth of our aluminum operations to serve a significant number of our
existing carbon flat roll steel customers who also consume, or process, aluminum flat rolled products for automotive, appliance, construction,
and other applications. We are further diversifying our end markets by supplying aluminum flat rolled products to the sustainable beverage
can industry. We have developed our real estate to

-- 20 of 100 --

Table of Contents
19
allow customers to co-locate on-site, with one customer already in the construction process and others expected to co-locate at the rolling mill
site in Columbus, enhancing cost efficiencies and reducing emissions across the supply chain.
Competition. We compete with other North American aluminum flat rolled products producers primarily on the basis of price, quality,
customer service, and proximity to the customer. We also face potential competition from other producers of aluminum products in attempting
to secure aluminum scrap supply through direct purchasing from our scrap suppliers.
Other Information
Sources, Availability, and Cost of Steel and Other Operations’ Raw Materials
Ferrous Scrap Metals. The principal raw material of our EAF steel operations is recycled ferrous scrap derived from, among other
sources, "home scrap,” generated internally at our steel mills themselves; industrial scrap, generated as a by-product of manufacturing;
obsolete scrap, recycled from end-of-life automobiles, appliances, and machinery; and demolition scrap, recycled from obsolete structures,
containers, and machines.
Recycled ferrous scrap typically comprises more than 80% of the metallic melt mix in EAF steelmaking, in contrast to integrated mill
steelmaking, where the proportion of scrap has traditionally been approximately 25% to 35%. Depending upon the scrap substitute material
that may be available from time to time, and the relative cost of such material, the percentage of scrap used in our steelmaking operations could
be increased or reduced in our metallic melt mix.
Iron Units. In addition to scrap, pig iron, DRI, HBI, and internally sourced liquid pig iron are used in our EAF steel mill production. During
2025, 2024, and 2023 we consumed 13.0 million tons of metallic materials in our steelmaking furnaces, of which iron units other than scrap
represented approximately 13% of the tons in 2025, and 15% of the tons in 2024 and 2023.
Aluminum Scrap Metals. The principal raw materials of our aluminum operations are raw aluminum (P1020) and recycled aluminum scrap
derived from, among other sources, "home scrap,” generated internally at our rolling mill; industrial scrap, generated as a by-product of
manufacturing, recycled from automotive and food beverage container manufacturers; and recycled materials from end-of-life trucks and
automobiles, industrial products, and used food and beverage containers ("UBCs”). Recycled aluminum content varies by product, alloy, and
end customer application. Food and beverage products typically achieve 85% or better recycled content, and industrial and automotive
products’ recycled content is typically 65%. Depending upon the scrap substitute material that may be available from time to time, and the
relative cost of such material, the percentage of scrap used in our aluminum operations could be increased or reduced in our metallic melt mix.
Many variables can impact ferrous and nonferrous scrap prices, all of which reflect the pushes and pulls of the supply-demand equation.
These factors include the level of domestic production (high quality, low-residual scrap is a by-product of manufacturing activity), the level of
exports of scrap from the United States, and the amount of obsolete scrap recycled. In addition, historical domestic ferrous scrap prices
typically have a strong correlation and spread to global pig iron pricing. Generally, as domestic steel production increases, so does ferrous
scrap demand and resulting scrap prices. The reverse is also normally, but not always, true with scrap prices following steel prices downward
when supply exceeds demand. When scrap prices greatly accelerate, this can challenge one of the principal elements of an EAF based steel
mill’s traditional lower cost structure—the cost of its metallic raw material.
Energy Resources
Electricity. Electricity is a significant input required in our EAF steel operations, representing approximately 4% of steel production costs
of goods sold in 2025, 2024, and 2023. We have entered into fixed price electricity contracts for the Butler Flat Roll Division, Columbus Flat
Roll Division, Roanoke Bar Division and Steel of West Virginia, while our Structural and Rail Division and Engineered Bar Products Division
have a combination of fixed pricing and market

-- 21 of 100 --

Table of Contents
20
pricing for the various components of the electrical services (demand charge, energy charge, riders, etc.). Our Sinton Flat Roll Division
purchases electricity at current market prices.
Research and Development
Our research and development activities have consisted of efforts to expand, develop, and improve our products and operating
processes, including those at our recycled aluminum flat rolled products mill and Sinton Flat Roll Division, as well as our efforts to develop
and improve renewable product alternatives, such as our biocarbon production facility. Most of these research and development efforts have
been conducted in-house by our team members.
Environmental Matters
Our operations are subject to substantial and evolving environmental, health and safety laws and regulations concerning, among other
things, emissions to the air, discharges to surface and ground water and to sewer systems, use of water, and the generation, handling, storage,
transportation, treatment and disposal of solid and hazardous wastes and secondary materials. Our operations are dependent upon permits
regulating discharges into the environment or the use and handling of raw materials or by-products in order to operate our facilities. We
dedicate considerable resources aimed at achieving compliance with applicable laws concerning the environment. While we do not currently
believe that our future compliance efforts with such provisions will have a material adverse effect on our results of operations, cash flows, or
financial condition, this is subject to change in the ever-evolving regulatory environment in which we operate.
Since the interpretation and enforcement of environmental laws and regulations that may be enacted from time to time can be subject to
changing social or political norms, our environmental capital expenditures and costs for environmental compliance may increase in the future.
In addition, due to the possibility of unanticipated regulatory or other developments, the amount and timing of future environmental
expenditures may vary substantially from those currently anticipated. The cost of current and future environmental compliance may also place
our operations at a competitive disadvantage with respect to foreign producers, which may not be required to undertake equivalent costs in
their operations.
Pursuant to the Resource Conservation and Recovery Act (RCRA), which governs the handling, recycling and disposal of solid and
hazardous wastes and hazardous secondary materials, the United States Environmental Protection Agency (United States EPA) and
authorized state or local environmental agencies may conduct inspections to identify alleged violations or areas where there may have been
releases of solid or hazardous constituents into the environment and require the facilities to pay penalties and/or take corrective action to
address any such releases. RCRA also allows citizens in certain situations to bring claims against facilities for potential damages and cleanup.
Many states have statutes and regulatory authorities similar to RCRA that can also apply. Many of our facilities generate wastes and
secondary materials subject to these requirements. Some of these materials, for example EAF dust, may be categorized as hazardous waste,
requiring special handling for disposal or for the recovery of metallics. While we cannot predict the future actions of the regulators or other
interested parties, the potential exists for required corrective action, the costs of which could be substantial.
Under the Comprehensive Environmental Response Compensation and Liability Act, known as CERCLA or Superfund, the United States
EPA, state agencies and, in some instances, private parties have the authority to assert joint and several liability for the remediation of
contaminated properties upon generators of hazardous substances, current and former site owners and operators, transporters, and other
potentially responsible parties, regardless of fault or the legality of the original disposal activity. Many states have statutes and regulatory
authorities similar to CERCLA that can also apply. We have a number of material handling agreements with various contractors to properly
dispose of or recycle our EAF dust and other by-products of our operations. However, we cannot assure that, even if there has been no fault
by us, we may not still be cited as a hazardous substances generator by reason of an environmental cleanup at one of our facilities or a site to
which our by-products were transported.
The Clean Water Act and similar state and local laws apply to aspects of our operations and impose regulatory restrictions related to the
discharge of wastewater, storm water, and dredged or fill material. The United States EPA, state agencies and, in certain instances, local
governments and private parties have the ability to bring claims alleging

-- 22 of 100 --

Table of Contents
21
violations and seeking penalties and injunctive relief. These legal provisions can also require new or expanded water treatment investments to
be made and can limit or even prohibit certain current or planned activities at our operations.
The Clean Air Act and analogous state and local laws require many of our facilities to obtain and maintain air permits in order to operate.
Air permits can impose new or expanded obligations to limit or prevent current or future emissions and to add costly pollution monitoring and
control equipment. Claims for alleged violations can be brought by the United States EPA, state agencies, and in certain instances local
governments and private parties, and can result in penalties and injunctive relief.
In addition, there are a number of other environmental, health and safety laws and regulations that apply to our facilities and may affect
our operations. By way of example and not of limitation, certain portions of the federal Toxic Substances Control Act, Oil Pollution Act, Safe
Drinking Water Act, and Emergency Planning and Community Right-to-Know Act, as well as state and local laws and regulations implemented
by the regulatory agencies, apply to aspects of our facilities’ operations. Some jurisdictions also have regulations governing the appropriation
and use of water and other raw materials. Our operations in Mexico are similarly subject to environmental requirements applicable to those
operations. In some instances, we may also be subject to other foreign governments’ regulations and international treaties and laws. Many of
these laws allow both the governments and citizens in certain situations to bring claims against facilities for alleged environmental violations.
Finally, our operations could in certain situations be subject to toxic tort claims brought by third parties alleging causes of action such as
nuisance, negligence, trespass, infliction of emotional distress, or other claims alleging personal injury, property damage, or other harms.
Available Information
Our internet website address is www.steeldynamics.com. We make available on our internet website, under "Investors,” free of charge, as
soon as reasonably practicable after such materials are electronically filed with, or furnished to, the Securities and Exchange Commission, our
Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports, as well as
press releases, ownership reports pursuant to Section 16(a) of the Securities Act of 1933, our Code of Ethics for Principal Executive Officers
and Senior Financial Officers, our Code of Business Conduct and Ethics, and any amendments thereto or waivers thereof, as well as our Audit,
Compensation, and Corporate Governance and Nominating Committee Charters. The contents of our or any other website are not incorporated
into this report. These reports are also available publicly on the Securities and Exchange Commission website, www.sec.gov.

-- 23 of 100 --

Table of Contents
22
ITEM 1A. 	RISK FACTORS
Many factors may have an effect on our business, results of operations, financial condition and cash flows. We are subject to various
risks resulting from changing economic, environmental, regulatory, political, industry, business and financial conditions. The factors
described below are some of the risks that could materially negatively impact us.
Global and National Risks Related to our Business
Our industries, as well as the industries of many of our customers and suppliers upon whom we are dependent, are affected by domestic
and global economic factors including periods of slower than anticipated economic growth and the risk of a recession.
Our financial results are substantially dependent not only upon overall economic conditions in the United States and globally, including
North America, Europe and in Asia, but also as they may affect one or more of the industries upon which we depend for the sale of our
products. Global or domestic actions or conditions, including political actions, proposed or actual trade policies or restrictions, including
tariffs or quotas, proposed or actual changes in tax laws, including the imposition of new tax laws or sunset of certain tax laws, proposed or
actual regulation, including those related to the environment, interest rates, terrorism, acts of war or hostility, natural disasters, or pandemics,
epidemics, widespread illness or other health issues, could result in changing economic conditions in the United States and globally,
disruptions to or slowdowns in our business, our supply chain, or our global or domestic industries, or those of our customers or suppliers
upon whom we are dependent. Additionally, periods of slower than anticipated economic growth could reduce customer confidence and
adversely affect demand for our products and further adversely affect our business, results of operations, financial condition and cash flows.
Metals industries have historically been vulnerable to significant declines in consumption and product pricing during periods of economic
downturn or continued uncertainty.
Our business is also dependent upon certain industries, such as construction, automotive, manufacturing, transportation, heavy and
agricultural equipment, energy, food packaging, beverage can and pipe and tube (including OCTG) markets, and many of these industries are
also cyclical in nature and may experience supply chain disruptions. Therefore, these industries may experience their own fluctuations in
demand for our products based on such things as economic conditions, interest rates, supply chain disruptions, raw material and energy
costs, consumer demand, the rate of inflation and infrastructure funding decisions by governments. Many of these factors are beyond our
control. As a result of volatility in our industries or in the industries we serve, we may have difficulty increasing or maintaining our level of
sales or profitability. A downturn in our industries or the industries we serve may adversely affect our business, results of operations,
financial condition and cash flows.
A prospective decline in consumer and business confidence and spending, which is often coupled with reductions in the availability of
credit or increased cost of credit and interest rates, as well as volatility in the capital and credit markets, may adversely affect the business and
economic environment in which we operate and the profitability of our business. We are also exposed to risks associated with the
creditworthiness of our customers and suppliers, which during times of high interest rates can be intensified. If the availability of credit to
fund or support the continuation and expansion of our customers’ business operations is curtailed or if the cost of that credit is high, the
resulting inability of our customers or of their customers to either access credit or absorb the cost of that credit may adversely affect our
business by reducing our sales or by increasing our exposure to losses from uncollectible customer accounts. A disruption of the credit
markets could also result in financial instability for some of our customers and suppliers. The consequences of such adverse effects could
include the interruption of production at the facilities of our customers, the reduction, delay or cancellation of customer orders, delays or
interruptions of the supply of raw materials we purchase, and bankruptcy of customers, suppliers or other creditors. Any of these events may
adversely affect our business, results of operations, financial condition and cash flows.

-- 24 of 100 --

Table of Contents
23
Global steelmaking overcapacity and imports of steel into the United States may adversely affect United States steel prices, which,
together with increased scrap prices, may adversely affect our business, results of operations, financial condition and cash flows.
Global steelmaking capacity currently exceeds global consumption of steel products, which adversely affects United States and global
steel prices. Such excess capacity sometimes results in steel manufacturers in certain countries exporting steel and steel products, at prices
that are lower than prevailing domestic prices, and sometimes at or below their cost of production. Excessive imports of steel and steel
products, into the United States, may exert downward pressure on United States steel and steel products prices, which adversely affects our
business, results of operations, financial condition and cash flows. Fluctuations in the value of the dollar can also affect imports, as a strong
United States dollar makes imported products less expensive, potentially resulting in more imports of steel and steel products into the United
States by our foreign competitors. Furthermore, the introduction of additional domestic steel capacity could increase this global overcapacity.
This, in turn, has led to and may further lead to increased domestic demand for ferrous scrap resulting in increased scrap prices. Our steel
operations financial condition, results of operations, and cash flows are driven primarily from the metal spread achieved from the price we sell
steel and steel products compared to the price of our metallic raw materials, including scrap. During prolonged periods of steel and steel
products overcapacity, leading to lower selling prices, combined with high demand for scrap and raw materials, leading to higher buying
prices, our metal spreads could be compressed, which may adversely affect our business, results of operations, financial condition and cash
flows.
United States steel producers compete with many foreign producers, including those in China, Vietnam and other Asian and European
countries. Competition from foreign producers is typically strong and is periodically exacerbated by weakening of the economies of certain
foreign steelmaking countries, at times leading to imports of steel involving dumping and subsidy abuses by foreign steel producers. Some
foreign steel producers are owned, controlled or subsidized by foreign governments. As a result, decisions by these producers with respect to
their production, sales and pricing are sometimes influenced to a greater degree by political and economic policy considerations than by
prevailing market conditions, realities of the marketplace or consideration of profit or loss. A higher volume of steel imports into the United
States tends to occur at depressed prices when foreign steelmaking countries experience periods of economic difficulty, decreased demand for
steel products or excess capacity. The global steelmaking overcapacity is exacerbated by Chinese steel production capacity that far exceeds
that country’s demand and has made China a major global exporter of steel, resulting in weakened global steel pricing than otherwise would be
expected. While measures to curb unfair trade such as tariffs, duties or quotas, along with trade agreements with other countries, have
decreased the volume of steel and steel products imports, domestic steel and steel products prices can be negatively impacted by excessive
imports of steel and steel products. Should current or new tariffs, duties or quotas expire or be relaxed, repealed or circumvented by importers
of steel and steel products, or should trade agreements be renegotiated, downward pressure may be exerted on United States steel and steel
products prices, which may adversely affect our steel business, results of operations, financial condition and cash flows.
Industry Risks Related to our Business
Our level of production and our sales and earnings are subject to significant fluctuations as a result of the cyclical nature of the metals
industries and some of the other industries we serve.
The steel and aluminum manufacturing business is cyclical in nature, and the selling price of the products we make may fluctuate
significantly due to many factors beyond our control. Furthermore, a number of our products are commodities, subject to their own cyclical
fluctuations in supply and demand in both metal consuming and metal generating industries, including the construction and manufacturing
industries. The timing, magnitude and duration of these cycles and the resulting price fluctuations are difficult to predict. The sale of our
manufactured steel and aluminum products is directly affected by demand for our products in other cyclical industries, such as construction,
automotive, manufacturing, transportation, heavy and agricultural equipment, energy, food packaging, beverage can and pipe and tube
(including OCTG) markets. Economic difficulties, stagnant or slow global economies, supply and demand imbalances, supply chain
disruptions, periods of heightened inflation or high interest rates, and currency fluctuations in the United States or globally may decrease the
demand for our products or increase the amount of imports of steel or aluminum into the United States, which may decrease our sales, margins
and profitability.

-- 25 of 100 --

Table of Contents
24
Volatility and major fluctuations in prices and availability of scrap metal, scrap substitutes and supplies, and our potential inability to
pass higher costs on to our customers, may constrain operating levels and reduce profit margins.
Steel and aluminum producers require large amounts of raw materials, including ferrous and aluminum scrap metal and scrap substitute
products such as pig iron and pelletized iron, and other supplies such as zinc, graphite electrodes and ferroalloys. The principal raw materials
of our EAF steel operations and aluminum operations are recycled scrap derived from, among other sources, "home scrap,” generated
internally at steel and aluminum mills themselves; industrial scrap, generated as a by-product of manufacturing; obsolete scrap, recycled from
end-of-life automobiles, appliances, machinery, food packaging and used beverage cans; and demolition scrap, recycled from obsolete
structures, containers and machines. The prices for scrap are subject to market forces largely beyond our control, including demand by United
States and foreign steel and aluminum producers, freight costs and speculation. The scrap metal recycling industry has historically been, and
is expected to remain, highly cyclical and the prices for scrap have varied significantly in the past, may vary significantly in the future and do
not necessarily fluctuate in tandem with the price of steel and aluminum. Moreover, some of our integrated steel producer competitors are not
as dependent as we are on ferrous scrap as a part of their raw material melt mix, which, during periods of high scrap costs relative to the cost of
blast furnace iron used by the integrated producers, give them a raw material cost advantage over EAF mills. However, given environmental
considerations of investors, customers and regulators, additional EAF mills may be constructed, or companies currently operating blast
furnace mills may invest in EAF mills, leading to increased demand in ferrous scrap possibly resulting in higher ferrous scrap prices.
Additionally, the construction of any new aluminum flat rolled products mills may also lead to increased demand in aluminum scrap possibly
resulting in higher aluminum scrap prices. While our vertical integration with our metals recycling business and liquid pig-iron operations are
expected to enable us to continue being a cost-effective supplier to our own steelmaking and aluminum operations, for some of our metallics
requirements, we still rely on other metallics and raw material suppliers, as well as upon general industry supply conditions for the balance of
our needs.
The availability and prices of raw materials and supplies, particularly those with positive environmental attributes, may also be negatively
affected by new, existing or changing laws, regulations, sanctions or embargoes, including those that may impose output limitations or higher
costs associated with climate change or GHG allocation by suppliers, interruptions in production, accidents or natural disasters, changes in
exchange rates, global price fluctuations, the availability and cost of transportation, and competing uses, all of which may be heightened
during times of war or hostilities. Any inability to secure a consistent, cost-effective and timely supply of our raw materials and supplies may
adversely affect our business, financial condition, results of operations and cash flows.
Additionally, our inability to pass on all or a substantial part of any cost increases, whether due to positive environmental attributes,
inflation, supply and demand imbalances, or otherwise, or to provide for our customers’ needs because of the potential unavailability of raw
materials, supplies or required environmental attributes, may result in production slowdowns or curtailments or may otherwise adversely affect
our business, financial condition, results of operations and cash flows.
The cost and availability of electricity, natural gas, oil and other energy resources are subject to volatile market conditions.
We consume large amounts of energy to melt scrap, reheat semi-finished products for rolling into finished products and perform other
steps necessary to our production process. We rely on third parties for the supply of energy resources we require in our production activities.
The prices for and availability of electricity, natural gas, oil and other energy resources, including renewable or other clean energy sources, are
subject to regulation and volatile market conditions, often affected by weather conditions as well as political, environmental and economic
factors beyond our control. As large consumers of electricity and natural gas, we must have dependable delivery in order to operate.
Accordingly, we are at risk in the event of an energy disruption, including power outages, power unavailability or inability to obtain power at a
reasonable price or with sufficient desired environmental attributes. Prolonged blackouts, curtailments or disruptions caused by, among other
things, natural disasters or by political or environmental considerations would substantially disrupt our production. Since a significant portion
of our finished products are delivered by truck, unforeseen fluctuations in the price of fuel would also adversely affect our costs or the costs
of many of our customers.

-- 26 of 100 --

Table of Contents
25
Increased environmental, GHG emissions and sustainability considerations from our customers and investors or related regulations could
affect demand for our products and add significant costs.
Customers, investors and regulators have increased their focus on the environment, GHG emissions and sustainability. We are committed
to the environment and sustainability. We are taking further action to reduce our environmental footprint through our 2030 and 2050 goals for
GHG emission reduction and increased renewable energy usage. We believe that achievement of these goals will comport with expectations of
our customers and investors, but certain customers and investors may have differing requirements. To achieve these goals, our operational
costs may increase, and we have had and will continue to have additional capital expenditures, some of which we may not be able to pass
along to our customers. Any failure to timely meet these goals, or other requirements of customers or investors, may have an adverse effect on
our business, results of operations and stock price.
Additionally, governmental agencies, regulators, investors or other groups have introduced, and may request or require, environmental
monitoring, disclosures or regulations in response to the potential impacts of climate change. International treaties or agreements may also
result in increasing regulation of GHG emissions, including carbon emissions limitations or trading mechanisms. Any such regulation or
disclosure requirement could impose significant costs on our operations and on the operations of our customers and suppliers, including
increased energy, capital equipment, emissions controls, environmental monitoring and reporting and other costs in order to comply with
current or future laws, regulations or demands concerning the environment, climate change, GHG emissions and sustainability. Any adopted
regulations could negatively impact our ability, and that of our customers and suppliers, to compete with companies situated in areas not
subject to or not complying with such regulations, or could affect our environmental disclosures for any allowances, offsets or credits. We
may see an increase in costs relating to our assets that emit GHGs as a result of these initiatives, which may impact our operations directly or
through our customers and suppliers.
Compliance with and changes in environmental and remediation requirements may result in substantially increased capital requirements
and operating costs.
Existing laws or regulations, as currently interpreted or as may be interpreted in the future, as well as future laws or regulations, may
adversely affect our results of operations and financial condition.
We are subject to numerous local, state, federal and international statutory and regulatory environmental requirements relating to, among
other things:
● the generation, storage, treatment, handling and disposal of solid and hazardous wastes and secondary materials;
● the discharge of materials into the air, including periodic changes to the National Ambient Air Quality Standards and to emission
standards;
● the management, treatment and discharge of wastewater and storm water;
● the use and treatment of groundwater and surface water;
● the remediation of equipment, product, soil or water contamination;
● climate change legislation or regulation;
● the need for and the ability to timely obtain air, water or other environmental permits;
● the timely reporting of certain chemical usage, content, storage and releases;
● the remediation and reclamation of land used in or affected by our operations;
● natural resource protections; and
● the protection of our employees’ health and safety.
Compliance with environmental laws and regulations, which affect our EAF steelmaking, metals recycling, liquid pig-iron, aluminum, and
copper production operations, is a significant factor in our business. We are required to obtain

-- 27 of 100 --

Table of Contents
26
and comply with environmental permits and licenses, and failure to obtain or renew or the violation of any permit or license may result in
substantial fines and penalties, capital expenditures, operational changes, suspension of operations or the closure of a subject facility.
Similarly, delays, increased costs or the imposition of onerous conditions to the securing or renewal of permits may adversely affect these
operations.
Uncertainty regarding appropriate pollution control levels, testing and sampling procedures, and new pollution control technology are
factors that may increase our future compliance expenditures. We are unable to predict the ultimate cost of future compliance with
environmental requirements or their effect on our operations. Although we strive to be in substantial compliance with all applicable laws and
regulations, legal requirements frequently change and are subject to interpretation such that regulatory agencies may bring enforcement
actions for alleged noncompliance. Private parties might also bring claims against us under citizen suit provisions and/or for property damage
or personal injury allegedly resulting from our operations. New laws, regulations and changing interpretations by regulatory authorities,
together with uncertainty regarding the application of existing requirements, are among the factors that may increase our future expenditures
to comply with environmental requirements. The cost of complying with existing laws or regulations as currently interpreted or reinterpreted in
the future, or with future laws or regulations, may adversely affect our results of operations and financial condition.
Our operations produce significant amounts of by-products, some of which are handled as solid or hazardous waste or as hazardous
secondary materials. For example, our steel mills generate EAF dust, which the United States Environmental Protection Agency (United States
EPA) and other regulatory authorities classify as hazardous waste and regulate accordingly unless recycled in an exempt manner.
In addition, the feed materials for the shredders operated by our metals recycling operations include automobile bodies. A portion of the
feed materials consist of currently unrecyclable material known as shredder residue. If laws or regulations or the interpretation of the laws or
regulations change with regard to EAF dust or shredder residue or other by-products created by our operations, we may incur significant
additional expenditures.
Federal and state environmental laws enable federal and state agencies and certain private parties to recover from owners, operators,
generators and transporters the cost of investigation and cleanup of sites at which wastes or hazardous substances were disposed and/or
migrated. In connection with these laws, we may be required to clean up contamination discovered at our sites including contamination that
may have been caused by former owners or operators of the sites, to conduct additional cleanup at sites that have already had some cleanup
performed, to address emerging and newly-regulated contaminants such as per- and polyfluoroalkyl substances (PFAS) and 1,4-dioxane, or to
perform cleanup with regard to sites formerly used in connection with our operations.
In addition, we may be required to pay for, or to pay a portion of, the costs of cleanup at sites to which we sent materials for disposal or
recycling, notwithstanding that the original disposal or recycling activity may have complied with all regulatory requirements then in effect.
Under certain laws, a party can be held jointly and severally liable for all of the cleanup costs associated with a disposal site. In practice, a
liable party often splits the costs of cleanup with other potentially responsible parties. We have received notices from the United States EPA,
state agencies and third parties that we have been identified as potentially responsible for the costs of investigating and cleaning up a number
of disposal sites. In most cases, many other parties are also named as potentially responsible parties and also contribute to payment of those
costs.
Because cleanup liability can in some cases be imposed retroactively on activities that occurred many years ago, and because federal and
state agencies are still discovering sites that pose a threat to public health or the environment, we can provide no assurance that we will not
become liable for significant costs associated with investigation and remediation of cleanup sites.

-- 28 of 100 --

Table of Contents
27
Operational and Commercial Risks Related to our Business
We may face significant price and other forms of competition from other steel and aluminum producers, scrap processors and alternative
materials, which may adversely affect our business, financial condition, results of operations and cash flows.
The global markets in which steel and aluminum companies and scrap processors conduct business are highly competitive and became
even more so due to consolidations in these industries. Additionally, in many applications, steel and aluminum compete with other materials,
such as aluminum or steel, as the case may be, cement, composites, plastics, carbon fiber, titanium, tin, glass, wood, and
paperboard. Increased use of alternative materials for any reason, including as a response to regulations or customer demands, could decrease
demand for steel and aluminum or force other producers into new products or markets that compete more directly with us, and combined with
increased competition could cause us to lose market share, increase expenditures or reduce pricing, any one of which may adversely affect our
business, financial condition, results of operations and cash flows.
Availability of an adequate source of supply of scrap is required for our metals recycling operations.
We procure our scrap inventory from numerous sources. These suppliers generally are not bound by long-term contracts and generally
have no obligation to sell recyclable metal to us. In periods of low industry scrap prices, scrap suppliers may elect to hold recyclable metal to
wait for higher prices or intentionally slow their metal collection activities. If a substantial number of scrap suppliers cease selling recyclable
metal to us, we may be unable to recycle metal at desired levels which may adversely affect our results of operations and financial condition.
In addition, a slowdown of industrial or other scrap sources, such as used beverage cans, production in the United States reduces the supply
of industrial grades of metal to the metals recycling industry, resulting in our having less recyclable metal available to process, sell, or
consume for our steelmaking or aluminum operations. Further, additional EAF steel mill or aluminum production facility construction or blast
furnace mills investing in EAF mills could increase the demand for ferrous and aluminum scrap, potentially resulting in higher scrap prices or
periods of decreased scrap supply. Any inability to secure scrap for our steelmaking and aluminum operations could adversely affect our
business, results of operations, financial condition and cash flows.
We are subject to cybersecurity threats and may face risks to the security of our sensitive data and information technology which may
adversely affect our business, results of operations, financial condition and cash flows.
Increased cybersecurity and information technology security requirements, vulnerabilities and threats and a rise in sophisticated and
targeted cybercrime, all of which may be heightened during times of war or hostilities, pose a risk to the security and functionality of our
systems and information networks, and to the confidentiality, availability and integrity of sensitive data, including intellectual property,
proprietary information, financial information, customer and supplier information, and personally identifiable information. Additionally,
cybersecurity vulnerabilities or attacks could result in an interruption of the functionality of our automated and electronically controlled
manufacturing operating systems, which, if compromised, could cease, threaten, delay or slow down our ability to melt, roll or otherwise
process steel, aluminum or any of our other products for the duration of such interruption. Our customers and suppliers may also store certain
of our sensitive information on their information technology systems, which if breached or attacked, could likewise expose our sensitive
information. Similarly, information system vendors and software suppliers may experience a cybersecurity or information technology breach
that exposes our systems or sensitive data. Any of these cybersecurity and information technology breaches or disruptions may result in
reputational harm and may adversely affect our business, results of operations, financial condition and cash flows.
Although we believe we have adopted procedures, training programs, and controls to adequately protect our sensitive data, networks
and information and operating technology and systems, there can be no assurance that a system or network failure, or cybersecurity breach or
attack, will be prevented, whether due to attacks by cyber criminals or due to employee, contractor or other error or malfeasance. This could
lead to system interruption, production delays or downtimes and operational disruptions, and the disclosure, modification or destruction of
sensitive data, which may adversely affect our reputation, customer and supplier relationships, financial results and results of operations, and
could result in litigation or regulatory investigations, actions, fines or penalties, as well as increased cybersecurity monitoring

-- 29 of 100 --

Table of Contents
28
and protection costs, including the cost or availability of insurance. Additionally, as cybersecurity threats continue to evolve and become
more sophisticated, we may need to invest additional time, resources and finances to protect the security of our sensitive data, systems and
information networks. We maintain an information security risk insurance policy to mitigate the impact of cybersecurity threats.
We may face risks associated with the implementation of our growth strategy.
Our growth strategy subjects us to various risks. As part of our growth strategy, we may expand existing facilities, enter into new
business lines, territories, products or process initiatives, acquire or build additional plants, acquire other businesses and assets, enter into
joint ventures, or form strategic alliances that we believe will complement our existing business. These expansions and transactions may
involve some or all of the following risks:
● the risk of entering business lines or product, domestic, or foreign markets, in which we have little experience, including the
aluminum industry;
● the risk of a newly constructed facility being completed over budget or not on time, including due to equipment delays or labor
shortages, or having delays or difficulties with its start-up, ramp-up or qualification of products;
● the risk of not being able to adequately obtain sufficient labor to efficiently build or staff a new facility, while maintaining our
culture;
● the risk of expected markets, products, customers and demand for products produced by a new facility being lower than expected;
● the risk of new product development and qualification, technology development or customer acquisition and penetration being
more costly, time-consuming or difficult than expected;
● the difficulty of competing for acquisitions and other growth opportunities with companies having materially greater financial
resources than us;
● the inability to realize anticipated synergies or other expected benefits;
● the difficulty of integrating new or acquired operations and personnel into our existing operations, while maintaining our culture;
● the potential disruption of ongoing operations;
● the diversion of financial resources or management attention to new operations, acquisition targets or acquired businesses;
● the loss of key employees, customers or suppliers of acquired businesses;
● the potential exposure to unknown liabilities;
● the inability of management to maintain uniform standards, controls, procedures and policies;
● the difficulty of managing the growth of a larger company;
● the risk of becoming involved in labor, commercial, political, regulatory or other disputes or litigation related to new operations,
acquisition targets or acquired businesses;
● the risk of becoming more highly leveraged;

-- 30 of 100 --

Table of Contents
29
● the risk of contractual or operational liability to other joint venture participants or to third parties as a result of our participation;
● the inability to work efficiently with joint venture or strategic alliance partners; and
● the difficulties of terminating joint ventures or strategic alliances.
Delays in achieving full operational capacity at our new facilities has adversely affected and may continue to adversely affect our
prospects, business, financial condition, results of operations and cash flows.
These expansions or transactions might be required for us to remain competitive, but we may not be able to complete any such
expansions or transactions on favorable terms or obtain financing, if necessary. Future expansions and transactions may not improve our
competitive position and business prospects as anticipated, and if they do not, our business, financial condition, results of operations and
cash flows may be adversely affected.
We may face risks associated with our ability to retain, develop and attract key personnel.
Our people are the foundation of our success and are our most important resource. Their continued education and talent
development are paramount to our success. As we continue to grow, our success depends in part on our ability to retain, develop and attract
team members with relevant industry and technical experience, while maintaining our culture. A loss of senior managers or other key
personnel, without adequate replacement, which could be exacerbated by a shortage of skilled workers and our more senior workforce, could
adversely affect our business and results of operations.
We are subject to litigation and legal compliance risks which may adversely affect our financial condition, results of operations and
liquidity.
We are involved from time to time in various litigation matters, including administrative proceedings, regulatory proceedings,
governmental investigations, environmental matters, and commercial and construction contract disputes, none of which are currently expected
to have a material impact on our financial condition, results of operations or liquidity. For additional information regarding legal proceedings
please refer to Item 3. Legal Proceedings.
In addition to risks associated with our environmental and other regulatory compliance, our international operations are subject to
complex foreign and United States laws and regulations, including the Foreign Corrupt Practices Act and other anti-bribery laws, regulations
related to import-export controls, the Office of Foreign Assets Control, and other laws and regulations, each of which may increase our cost of
doing business and expose us to increased risk.
Unexpected equipment downtime or shutdowns may adversely affect our business, financial condition, results of operations and cash
flows.
Interruptions in our production capabilities may adversely affect our production costs, products available for sale and earnings during the
affected period. In addition to equipment failures, our facilities are subject to the risk of catastrophic loss due to unanticipated events such as
fires, explosions or violent weather conditions. Our manufacturing processes are dependent upon critical pieces of equipment, such as our
EAFs, continuous casters, aluminum melting, and rolling equipment, some of which are controlled by our information technology systems, as
well as electrical equipment, such as transformers. This equipment may, on occasion, be out of service as a result of unanticipated failures or
other events, including equipment failure, power surges, cybersecurity breaches or attacks or system failures. Further, we have experienced
and may continue to experience inefficiencies during the start-up and ramp-up of new facilities, including those related to major equipment
failures. We have experienced and in the future may experience plant shutdowns or periods of reduced production as a result of equipment
failures or other events. Supply chain disruptions and labor shortages have and may continue to exacerbate the effects of equipment failures.
Delayed delivery of our products to customers who require on-time delivery from us may cause customers to purchase alternative products,
reschedule their own production, or incur other incremental costs. Customers may be able to pursue financial claims against us for their
incremental costs, and we may incur costs to correct such problems in addition to any liability resulting from such

-- 31 of 100 --

Table of Contents
30
claims. Interruptions may also harm our reputation among actual and potential customers, potentially resulting in a loss of business. These
disruptions may adversely affect our business, financial condition, results of operations and cash flows.
We may experience difficulties in the launch or production ramp-up of new products which may adversely affect our business.
As we ramp up manufacturing processes for newly introduced products, we may experience difficulties, including manufacturing
disruptions, delays, or other complications, which could adversely affect our ability to serve our customers, our reputation, our costs of
production and, ultimately, our business, financial condition, results of operations and cash flows.
Our aluminum operations depend on a core group of significant customers.
We have a relatively concentrated group of aluminum customers. Most of these customers have one or more sizable sales agreements
with us. If one or more of these customers experienced a prolonged period of adverse demand, depressed business activity or financial
distress, if any of these customers breached or sought relief from its contractual obligations under its sales agreements with us or if any of
these customer relationships otherwise ended or materiality deteriorated and such lost business was not successfully replaced, our aluminum
operations financial condition, results of operations, and cash flows may be adversely affected.
Governmental agencies may refuse to grant or renew some of our licenses and permits required to operate our businesses.
Some of our operations must receive licenses and air, water and other permits and approvals from federal, state and local governments to
conduct certain of our operations or to build, expand or acquire new facilities. Governmental agencies, non-governmental organizations, and
members of the public sometimes resist the establishment of certain types of facilities in their communities. There can be no assurance that
future approvals, licenses and permits will be granted or that we will be able to maintain and renew the approvals, licenses and permits we
currently hold. Failure to do so may adversely affect our business, financial condition, results of operations and cash flows.
Our existing debt agreements contain, and any future financing agreements may contain, restrictive covenants that may limit our
flexibility.
Restrictions and covenants in our existing debt agreements, including our senior unsecured credit facility, and any future financing
agreements, may impair our ability to finance future operations or capital needs or to engage in other business activities. A breach of any of
the restrictions or covenants could cause a default under our senior unsecured credit facility, our senior notes, or our other debt. A significant
portion of our indebtedness may then become immediately due and payable.
Under our senior unsecured credit facility, we are required to maintain certain financial covenants. Our ability to meet such covenants or
other restrictions can be affected by events beyond our control. If a default were to occur, the lenders could elect to declare all amounts then
outstanding to be immediately due and payable and terminate all commitments to extend further credit.
Impairment charges may adversely affect our results of operations.
Occasionally, assumptions that we have made regarding products or businesses we have acquired or sought to develop, about the
sustainability of markets in which we participate, or about industry conditions that underlie our decision making when we elected to capitalize
a venture turn out differently than anticipated. In such instances, the fair value of such assets may fall below their carrying value recorded on
our balance sheet.

-- 32 of 100 --

Table of Contents
31
Accordingly, we periodically test goodwill, and other assets such as long-lived tangible assets and intangible assets, right of use assets
and equity method investments when indicators of impairment are present, to determine whether their estimated fair value is in fact less than
their value recorded on our balance sheet. If we determine that the fair value of any of these assets, from whatever cause, is less than the value
recorded on our balance sheet, we are required to incur non-cash asset impairment charges that adversely affect our results of operations.
There can be no assurances that market dynamics or other factors may not result in future impairment charges.
ITEM 1B. 	UNRESOLVED STAFF COMMENTS
None.
ITEM 1C. 	CYBERSECURITY
We manage risks from cybersecurity threats through our overall companywide risk management process, which is overseen by our
Board of Directors and specific Board Committees. Management has created a global information security program, which encompasses a
dedicated global information security team and policies, procedures, and processes for assessing, identifying, and managing risks from
cybersecurity threats. Our policies, procedures, and processes utilize recognized frameworks established by the National Institute of
Standards and Technology ("NIST”), as well as other relevant standards. Our program is designed to maintain the confidentiality, integrity,
security, and availability of the data that is created, collected, stored, and used to operate our business.
Risk Management and Strategy
We recognize the importance of assessing, identifying, and managing material risks associated with cybersecurity threats, utilizing,
from time to time, tabletop exercises, business unit assessments, threat modeling, impact analyses, internal audits, external audits, third party
vulnerability scans, third party penetration tests, and engagement of third parties to conduct analysis of our information security programs,
including an overall assessment utilizing the NIST standards. These risks include, among other things: operational risks, intellectual property
theft, fraud, extortion, harm to team members or customers, and violations of data privacy or security laws.
Our Information Security Team has established a cybersecurity risk management program of policies and processes for assessing,
identifying, and managing risk from cybersecurity threats. We have integrated these processes into our overall risk management systems and
processes, and routinely assess risks from cybersecurity threats, including any potential unauthorized access to or activity conducted
through our information systems that may result in material adverse effects on the confidentiality, integrity, or availability of our information
systems or any information residing therein. This program includes established reasonable safeguards to minimize the identified risks;
processes to reasonably address any identified gaps in existing safeguards; updates to existing safeguards as necessary; and monitoring the
effectiveness of those safeguards.
Our safeguards include continuous network monitoring, complex passwords, team member training that reinforces our policies,
standards, and practices, incident response capability reviews and exercises, and cybersecurity insurance and disaster recovery plans for the
protection of our assets. The information security training and awareness program engages personnel through training modules on how to
identify potential cybersecurity risks and protect our resources and information. This training is mandatory for all team members monthly, and
is supplemented by companywide testing initiatives, including periodic phishing tests.
Our cybersecurity risk management program also assesses third party providers, such as vendors, suppliers, and other business
partners. Cybersecurity risks are evaluated when determining the selection and oversight of applicable third party providers and potential
risks when handling or processing our employee, business, or customer data.
Further, we have designated a member of our senior leadership team, our Chief Financial Officer, to oversee the management of the
safeguards, cybersecurity risk assessment, and mitigation process. From time to time, the Company’s program is reviewed and validated by
internal and external experts.

-- 33 of 100 --

Table of Contents
32
In general, our incident response process utilizes the NIST framework and focuses on four phases: (i) preparation; (ii) detection and
analysis; (iii) containment, eradication, and recovery; and (iv) post-incident remediation. As cybersecurity incidents occur, including at third
party providers, the Information Security Team engages in a standardized incident response process that focuses on responding to and
containing the threat, minimizing any business impact, and evaluating its severity level. The severity level assessment determines how
widespread the incident is and to what degree it could impact our overall business and manufacturing environment. In the event an incident is
determined by the Information Security Team to be a high severity level, our cross functional team, with expertise in various disciplines, will
assess the incident to determine if it has had a material affect or is reasonably likely of having a material effect on the Company’s business
strategy, results of operations, or financial condition.
We do not believe that risks from cybersecurity threats, including as a result of any previous cybersecurity incidents, have materially
affected or are reasonably likely to materially affect our overall business strategy, results of operations, or financial condition over the long
term. In the last three years, the Company has not been aware of any material cybersecurity incidents occurring and we have not incurred
material expenses from cybersecurity incidents (including penalties and settlements, of which there were none). For additional discussion of
whether and how risks from cybersecurity threats could materially affect or are reasonably likely to materially affect the Company, see Item 1A.
Risk Factors – "We are subject to cybersecurity threats and may face risks to the security of our sensitive data and information technology
which may adversely affect our business, results of operations, financial condition and cash flows.”
Governance
One of the key functions of our Board of Directors is informed oversight of our risk management process, including risks from
cybersecurity threats. Our Board of Directors is responsible for monitoring and assessing strategic risk exposure, and our senior leadership
team is responsible for the day-to-day management of the material risks we face. Our Board of Directors administers its cybersecurity risk
oversight function directly as a whole, as well as directly through the Audit Committee. Management and members of the Information
Security Group ("ISG”) regularly present to the Board of Directors regarding information security and an in-depth review of our processes for
assessing, identifying, and managing material risks from cybersecurity threats. On a quarterly basis, the Audit Committee is informed by
management concerning the status of existing and new cybersecurity risks, status of how management is addressing and mitigating those
risks, material cybersecurity and data privacy incidents (if any), and status of key information security initiatives. Additionally, on a biennial
basis, we engage third parties to assess our information security program using the NIST framework, as well as perform penetration testing.
We have allocated substantial cross functional internal resources with expertise in information security, information technology,
operations, risk management, human resources, finance, and legal to form a governance counsel known as the ISG. This group contains
members with a master’s degree in information security, as well as individuals with over 20 years of experience in cybersecurity. The ISG is an
internal, collaborative working group that ensures our cybersecurity program is adequately responsive to the evolving threat landscape.

-- 34 of 100 --

Table of Contents
33
ITEM 2. 	PROPERTIES
The following table describes our significant properties as of December 31, 2025. These properties are owned by us and not subject to
any significant encumbrances, or are leased by us. We believe these properties are suitable and adequate for our current operations and are
appropriately utilized. For additional information regarding our significant facilities please refer to Item 1. Business.
Site 	Site
Acreage 	Acreage
Operations 	Location 	Description 	Owned 	Leased
Steel Operations Segment *
Butler Flat Roll Division:
Butler Operations 	Butler, IN 	Flat Roll Steel Mill and Coating Facility 	995 	—
Jeffersonville Operations 	Jeffersonville, IN 	Flat Roll Steel Coating Facility 	27 	10
Iron Dynamics 	Butler, IN 	Liquid Ironmaking Facility 	25 	—
Columbus Flat Roll Division 	Columbus, MS 	Flat Roll Steel Mill and Coating Facility 	1,387 	—
Sinton Flat Roll Division 	Sinton, TX 	Flat Roll Steel Mill and Coating Facility 	2,842 	—
The Techs 	Pittsburgh, PA 	Flat Roll Steel Coating Facilities 	17 	2
Heartland Flat Roll Division 	Terre Haute, IN 	Flat Roll Steel Cold-Rolling and Coating Facility 	246 	—
United Steel Supply 	IN, ID, MS, OR, and TX Distributor of Painted Galvalume® Flat Roll Steel 	58 	1
New Process Steel 	IN, IL, MS, AL, TX, and
Monterrey, Mexico 	Flat Roll Steel Distributor and Processing Facility 	— 	23
SDI Mexico 	Monterrey, Mexico 	Flat Roll Steel Distribution Warehouse 	— 	5
Structural and Rail Division 	Columbia City, IN 	Structural and Rail Steel Mill 	1,003 	—
Engineered Bar Products Division 	Pittsboro, IN 	Engineered Bar Steel Mill and Finishing Facility 	312 	—
Vulcan Threaded Products 	Pelham, AL 	Bar Steel Processing Facility 	31 	—
Roanoke Bar Division 	Roanoke, VA 	Merchant Bar Steel Mill 	313 	—
Steel of West Virginia 	WV, KY, and TN 	Specialty Shapes Steel Mill and Finishing 	141 	6
and Coating Facilities
SDI Biocarbon Solutions 	Columbus, MS 	Biocarbon Production Facility 	133 	—
Metals Recycling Operations Segment
OmniSource:
Alabama 	Birmingham, AL 	Ferrous Scrap Processing 	59 	—
Indiana 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	359 	26
Michigan 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	124 	—
Mississippi 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	43 	13
North Carolina 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	303 	—
Ohio 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	239 	21
Oklahoma 	Sand Springs, OK 	Ferrous Scrap Processing 	— 	10
Tennessee 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	65 	—
Texas 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	130 	9
Virginia 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	121 	—
Mexico 	Multiple Cities 	Ferrous and Nonferrous Scrap Processing 	17 	62
Steel Fabrication Operations Segment
New Millennium Building Systems:
Joist and Deck Operations 	Butler, IN 	Steel Joist and Deck Fabrication Facility 	156 	—
Joist Operations 	Fallon, NV 	Steel Joist Fabrication Facility 	68 	—
Joist and Deck Operations 	Hope, AR 	Steel Joist and Deck Fabrication Facility 	245 	7
Joist Operations 	Juarez, MX 	Steel Joist Fabrication Facility 	17 	—
Joist and Deck Operations 	Lake City, FL 	Steel Joist and Deck Fabrication Facility 	81 	—
Deck Operations 	Memphis, TN 	Deck Fabrication Facility 	19 	—
Joist and Deck Operations 	Salem, VA 	Steel Joist and Deck Fabrication Facility 	113 	—
Aluminum Operations Segment
Aluminum Dynamics, LLC 	Columbus, MS 	Recycled Aluminum Flat Rolled Products Mill 	2,112 	—
Aluminum Dynamics of Mexico 	San Luis Potosi, Mexico Recycled Aluminum Slab Facility 	692 	—
Superior Aluminum Alloys 	New Haven, IN 	Recycled Aluminum Deox-Rod Facility 	96 	—
The company’s corporate headquarters is located in Fort Wayne, Indiana on 20 owned acres. Our copper rod and wire facility, a controlled
subsidiary, is in New Haven, Indiana on 35 owned and 4 leased acres.
*Our 2025 steel mill production utilization was 86% of our estimated annual steelmaking capability.

-- 35 of 100 --

Table of Contents
34
ITEM 3. 	LEGAL PROCEEDINGS
We are involved in various litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations,
environmental matters, and commercial and construction contract disputes, none of which are currently expected to have a material impact on
our financial condition, results of operations, or liquidity.
We may also be involved from time to time in various governmental investigations, regulatory proceedings or judicial actions seeking
penalties, injunctive relief, and/or remediation under federal, state and local environmental laws and regulations. The United States EPA has
conducted such investigations and proceedings involving us, in some instances along with state environmental regulators, under various
environmental laws, including RCRA, CERCLA, the Clean Water Act and the Clean Air Act. Some of these matters have resulted in fines or
penalties, exclusive of interest and costs, which did not exceed $1 million in aggregate, as of December 31, 2025.
ITEM 4. 	MINE SAFETY DISCLOSURES
None.

-- 36 of 100 --

Table of Contents
35
PART II
ITEM 5. 	MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF
EQUITY SECURITIES
The information required by Item 5 with respect to securities authorized for issuance under equity compensation plans is set forth in
Part III, Item 12 of this Form 10-K. Our common stock trades on The NASDAQ Global Select Stock Market under the symbol STLD.
As of February 25, 2026, we had 144,882,401 shares of common stock outstanding and held beneficially by approximately 25,000
stockholders based on our security position listing. Because many of the shares were held by depositories, brokers and other nominees, the
number of registered holders (approximately 1,160) is not representative of the number of beneficial holders.
Issuer Purchases of Equity Securities
We purchased the following equity securities registered by us pursuant to Section 12 of the Exchange Act during the three months ended
December 31, 2025.
Period
Total Number of
Shares Purchased
Average Price
Paid per Share
Total Number of Shares
Purchased as Part of Publicly
Announced Program(1)
Maximum Dollar Value of Shares
That May Yet be Purchased Under
the Program (in thousands) (1)
Quarter ended December 31, 2025
October 1-31 	109,815 	$ 	146.90 	109,815 	$ 	1,023,609
November 1-30 	910,321 	157.62 	910,321 	881,551
December 1-31 	466,035 	173.11 	466,035 	800,968
1,486,171 	1,486,171
(1) In February 2025, our board of directors authorized a share repurchase program of up to $1.5 billion of our common stock.

-- 37 of 100 --

Table of Contents
36
Total Return Graph
The graph below compares Steel Dynamics, Inc.’s cumulative 5-year total shareholder return on common stock with the cumulative total
returns of the S&P 500 index and the S&P 500 Steel index. The graph tracks the performance of a $100 investment in our common stock and in
each index (with the reinvestment of all dividends) from December 31, 2020 to December 31, 2025.
ITEM 6. 	[RESERVED]

-- 38 of 100 --

Table of Contents
37
ITEM 7. 	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Forward-Looking Statements
This report contains some predictive statements about future events, including statements related to conditions in domestic or global
economies, conditions in steel, aluminum, and recycled metals market places, Steel Dynamics' revenues, costs of purchased materials, future
profitability and earnings, and the operation of new, existing or planned facilities. These statements, which we generally precede or
accompany by such typical conditional words as "anticipate", "intend", "believe", "estimate", "plan", "seek", "project", or "expect", or by the
words "may", "will", or "should", are intended to be made as "forward-looking", subject to many risks and uncertainties, within the safe
harbor protections of the Private Securities Litigation Reform Act of 1995. These statements speak only as of this date and are based upon
information and assumptions, which we consider reasonable as of this date, concerning our businesses and the environments in which they
operate. Such predictive statements are not guarantees of future performance, and we undertake no duty to update or revise any such
statements. Some factors that could cause such forward-looking statements to turn out differently than anticipated include: (1) domestic and
global economic factors; (2) global steelmaking overcapacity and imports of steel, together with increased scrap prices; (3) the cyclical nature
of the metals industries and the industries we serve; (4) volatility and major fluctuations in prices and availability of scrap metal, scrap
substitutes and supplies, and our potential inability to pass higher costs on to our customers; (5) cost and availability of electricity, natural
gas, oil, and other energy resources are subject to volatile market conditions; (6) increased environmental, greenhouse gas emissions and
sustainability considerations from our customers and investors or related regulations; (7) compliance with and changes in environmental and
remediation requirements; (8) significant price and other forms of competition from other steel and aluminum producers, scrap processors and
alternative materials; (9) availability of an adequate source of supply of scrap for our metals recycling operations; (10) cybersecurity threats
and risks to the security of our sensitive data and information technology; (11) the implementation of our growth strategy; (12) our ability to
retain, develop and attract key personnel; (13) litigation and legal compliance; (14) unexpected equipment downtime or shutdowns; (15)
difficulties in the launch or production ramp-up of new products; (16) our aluminum operations depend on a core group of significant
customers; (17) governmental agencies may refuse to grant or renew some of our licenses and permits; (18) our existing debt agreements
contain, and any future financing agreements may contain, restrictive covenants that may limit our flexibility; and (19) the impacts of
impairment charges.
More specifically, we refer you to our more detailed explanation of these and other factors and risks that may cause such predictive
statements to turn out differently, as set forth in the sections titled Special Note Regarding Forward-Looking Statements at the beginning of
Part I of this Report and Item 1A. Risk Factors, as well as in other subsequent reports we file with the Securities and Exchange Commission.
These reports are available publicly on the Securities and Exchange Commission website, www.sec.gov, and on our website,
www.steeldynamics.com under "Investors – SEC Filings.”
Operating Statement Classifications
Net Sales. Net sales from our operations are a factor of volumes shipped, product mix, and related pricing. We charge premium prices for
certain grades of steel and aluminum, product dimensions, certain smaller volumes, and for value-added processing or coating of our steel
products. Except for the steel fabrication operations, we recognize revenues from sales and the allowance for estimated returns and claims from
these sales at the point in time control of the product transfers to the customer, upon shipment or delivery. Our steel fabrication operations
recognize revenues over time based on completed fabricated tons to date as a percentage of total tons required for each contract.
Costs of Goods Sold. Our costs of goods sold represent all direct and indirect costs associated with the manufacture of our products. The
principal elements of these costs are scrap and scrap substitutes (which represent the most significant single component of our consolidated
costs of goods sold), steel substrate, direct and indirect labor and related benefits, alloys, zinc, transportation and freight, repairs and
maintenance, utilities such as electricity and natural gas, and depreciation.

-- 39 of 100 --

Table of Contents
38
Selling, General and Administrative Expenses. Selling, general and administrative expenses consist of all costs associated with our
sales, finance and accounting, and administrative departments, including, among other items, labor and related benefits, and professional
services.
Companywide profit sharing and amortization of intangible assets are each separately presented in the statements of income.
Interest Expense, net of Capitalized Interest. Interest expense consists of interest associated with our senior credit facilities and other
debt, net of interest costs that are required to be capitalized during the construction period of certain capital investment projects.
Other (Income) Expense, net. Other income consists of interest income earned on our temporary cash deposits, short-term and other
investments, and any other non-operating income activity, including income from investments in unconsolidated affiliates accounted for
under the equity method. Other expense consists of any non-operating costs, such as certain acquisition and financing expenses.
2025 Overview
During 2025 we achieved record steel shipments of 13.7 million tons. Underlying domestic steel demand was stable during 2025, as
imports declined from the elevated levels experienced during the first half of the year and as the Sinton Flat Roll Division’s year-over-year
operating performance improved. Our metals recycling operations segment achieved notable improvement in operating income in 2025
compared to 2024 on higher ferrous metals volumes and higher ferrous and nonferrous pricing. Our steel fabrication operations experienced
historically strong, yet moderating product pricing compared to 2024, with stabilization in selling values realized in the fourth quarter of 2025.
Finally, our aluminum operations segment achieved successful production and qualifications of industrial, beverage can, and automotive
quality flat rolled aluminum products, with shipments commencing in the late second half of 2025.
Consolidated net sales were $18.2 billion during 2025, with cash flow from operations of $1.4 billion. Metal spread compression in our steel
and, particularly, steel fabrication segments resulted in lower operating income in 2025 compared to 2024. Consolidated operating income for
2025 decreased $467.1 million, or 24%, to $1.5 billion, compared to $1.9 billion in 2024. Net income attributable to Steel Dynamics, Inc. for 2025
decreased $351.5 million, or 23%, to $1.2 billion, compared to 2024. Diluted earnings per share attributable to Steel Dynamics, Inc. was $7.99 for
2025, compared to $9.84 for 2024.
Refer to Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations in Part II of our Annual
Report on Form 10-K for the year ended December 31, 2024, for additional information regarding results of operations for the year ended
December 31, 2024, as compared to the year ended December 31, 2023, and segment operating results for 2024 as compared to 2023.

-- 40 of 100 --

Table of Contents
39
Segment Operating Results (dollars in thousands)
Years Ended December 31,
2025 	% Change 	2024
Net sales
Steel Operations 	$ 	13,412,773 	7% 	$ 	12,527,066
Metals Recycling Operations 	4,346,074 	5% 	4,136,913
Steel Fabrication Operations 	1,418,665 	(20)% 	1,771,795
Aluminum Operations 	473,881 	49% 	318,689
Other 	1,335,454 	(8)% 	1,451,723
20,986,847 	20,206,186
Inter-segment 	(2,810,266) 	(2,665,796)
$ 	18,176,581 	4% 	$ 	17,540,390
Operating income (loss)
Steel Operations 	$ 	1,427,544 	(10)% 	$ 	1,582,374
Metals Recycling Operations 	97,176 	27% 	76,807
Steel Fabrication Operations 	407,425 	(39)% 	666,984
Aluminum Operations 	(172,970) 	(139)% 	(72,331)
Other 	(281,851) 	11% 	(317,408)
1,477,324 	1,936,426
Inter-segment 	(1,338) 	6,611
$ 	1,475,986 	(24)% 	$ 	1,943,037

-- 41 of 100 --

Table of Contents
40
Steel Operations Segment
Steel operations include our electric arc furnace (EAF) steel mills, including Butler Flat Roll Division, Columbus Flat Roll Division,
Southwest-Sinton Flat Roll Division, Structural and Rail Division, Engineered Bar Products Division, Roanoke Bar Division, and Steel of West
Virginia; steel coating and processing operations at The Techs, Heartland Flat Roll Division, United Steel Supply, New Process Steel, L.P.
(acquired December 1, 2025), and Vulcan Threaded Products, Inc.; warehouse operations in Mexico; and a 75% controlling equity interest in
SDI Biocarbon Solutions, LLC. Steel operations accounted for 72% and 69% of our consolidated net sales during 2025 and 2024, respectively.
See Item 1. Business for further information on Steel Operations segment operations.
Steel Operations Segment Shipments (tons):
Years Ended December 31,
2025 	% Change 	2024
Total shipments 	13,748,801 	9% 	12,660,487
Intra-segment shipments 	(1,429,299) 	(1,306,364)
Steel Operations Segment shipments 	12,319,502 	9% 	11,354,123
External shipments 	11,960,582 	9% 	10,929,453

-- 42 of 100 --

Table of Contents
41
Steel Operations Segment Results 2025 vs. 2024
During 2025, our steel operations achieved record annual shipments of 13.7 million tons (12.3 million excluding intra-segment), 9% higher
than 2024 shipments, primarily due to significant sales volume increases at our Sinton and Heartland facilities as the four new value-added
lines operated for a full year in 2025. Customer order activity and steel demand were strong during 2025, particularly as imports declined in the
latter half of the year. Demand was supported by manufacturing onshoring, infrastructure program funding, lower interest rates, and the
increasing regionalization of supply chains in the US. Despite these favorable market demand conditions, in the face of trade policy
uncertainty, average selling prices were modestly lower during 2025 compared to 2024. Steel segment average selling prices decreased 1%, or
$14 per ton, compared to 2024. Net sales for the steel operations segment were 7% higher in 2025 when compared to 2024, due to a 9% increase
in segment shipments.
Metallic raw materials used in our electric arc furnaces represent our single most significant steel manufacturing cost, generally
comprising approximately 55% to 65% of our steel mill operations’ manufacturing costs. Our metallic raw material cost consumed in our steel
mills was unchanged on a per net ton basis in 2025 compared to 2024, consistent with overall steady domestic scrap pricing noted below in the
metals recycling operations segment discussion.
As a result of average selling prices decreasing more than scrap costs, metal spread (which we define as the difference between average
steel mill selling prices and the cost of ferrous scrap consumed in our steel mills) decreased 2% in 2025 compared to 2024. Due to metal spread
compression, operating income for the steel operations decreased 10% to $1.4 billion in 2025 compared to 2024.
Metals Recycling Operations Segment
Metals recycling operations include our Omni ferrous and nonferrous processing, transportation, marketing, brokerage, and scrap
management services located throughout the United States and in Central and Northern Mexico. Our steel mills utilize a large portion of the
ferrous scrap sold by our metals recycling operations as raw material in our steelmaking operations, and the remainder is sold to other
consumers, such as other steel manufacturers and foundries. In 2025 and 2024, 65% and 62%, respectively, of metals recycling operations
ferrous scrap was sold to our own steel mills, as our steel mill utilization increased to 86% in 2025 compared to 81% 2024, with production
levels at our Sinton facility increasing during 2025. Metals recycling operations accounted for 11% of our consolidated net sales during 2025
and 2024.
Metals Recycling Operations Segment Shipments:
Years Ended December 31,
2025 	% Change 	2024
Ferrous metal (gross tons)
Total 	6,160,797 	5% 	5,850,544
Inter-segment 	(4,013,035) 	(3,656,034)
External shipments 	2,147,762 	(2)% 	2,194,510
Nonferrous metal (thousands of pounds)
Total 	916,502 	(5)% 	965,491
Inter-segment 	(178,716) 	(171,915)
External shipments 	737,786 	(7)% 	793,576

-- 43 of 100 --

Table of Contents
42
Metals Recycling Operations Segment Results 2025 vs. 2024
During 2025, our metals recycling operations continued to benefit from solid domestic steel industry demand, resulting in increased
ferrous scrap shipments compared to 2024. Net sales for our metals recycling operations in 2025 increased 5% compared to 2024, driven by
increased ferrous volumes and increased selling prices for both ferrous and nonferrous metals. Ferrous and nonferrous scrap average selling
prices increased 2% and 7%, respectively, during 2025 compared to 2024. Ferrous shipments increased 5% and nonferrous shipments
decreased 5% in 2025 compared to 2024.
Ferrous metal spreads (which we define as the difference between average selling prices and the cost of purchased scrap) were flat, while
nonferrous metal spreads, primarily aluminum, increased 24% in 2025 compared to 2024, with aluminum prices rising in the fourth quarter of
2025. As a result of these volume and metal spread changes, metals recycling operations operating income in 2025 of $97.2 million increased
27% from 2024.
Steel Fabrication Operations Segment
Steel fabrication operations include our New Millennium Building Systems’ joist and deck plants located throughout the United States,
and in Northern Mexico. Revenues from these plants are generated from the fabrication of steel joists, joist girders, and steel deck systems
used within the non-residential construction industry. Steel fabrication operations accounted for 8% and 10% of our consolidated net sales
during 2025 and 2024, respectively.
Steel Fabrication Operations Segment Results 2025 vs. 2024
Net sales for the steel fabrication operations decreased 20% during 2025 compared to 2024, as average selling prices decreased 13% and
volumes decreased 8% compared to 2024. Order activity remained strong during 2025, with our order backlog maintaining solid levels and
extending through the first half of 2026, supported by stable and historically strong pricing. Demand was largely driven by the commercial,
data center, manufacturing, warehouse, and healthcare sectors.
The purchase of various steel products is the largest single cost of production for our steel fabrication operations, historically
representing approximately two-thirds of the total cost of manufacturing. The average cost of steel consumed decreased 7% in 2025, as
compared to 2024. Lower selling prices per ton offset decreased steel input costs per ton,

-- 44 of 100 --

Table of Contents
43
resulting in contraction of metal spread (which we define as the difference between average selling prices and the cost of purchased steel) by
17% in 2025 compared to 2024. Metal spread compression coupled with decreased volume resulted in operating income decreasing 39% to
$407.4 million in 2025, compared to $667.0 million in 2024.
Aluminum Operations Segment
Our aluminum operations consist of a 650,000-metric-ton recycled aluminum flat rolled products mill in Columbus, Mississippi; two
150,000-metric-ton satellite recycled aluminum slab centers, one in Central Mexico and one under construction in the Southwest U.S.; and an
ancillary recycled aluminum deox-rod facility. The recycled aluminum flat roll products mill produces flat rolled aluminum products from
aluminum scrap and is a complementary extension of the company’s metals recycling platform. Our product offerings will be supported by
various value-added finishing lines that are still under construction, including two CASH (Continuous Annealing Solutions Heat Treating)
lines, a can end and tab coating line, and downstream processing and packaging lines. Aluminum operations accounted for 2% and 1% of our
consolidated net sales during 2025 and 2024, respectively.
Aluminum Operations Segment Results 2025 vs. 2024
During 2025, the results of this segment largely consisted of sales from the ancillary recycled aluminum deox-rod facility, as well as
construction, start-up, and commissioning costs associated with the recycled aluminum flat roll products mill and satellite recycled aluminum
slab centers. The flat rolled products mill shipped 15,000 metric tons of finished product during the second half of 2025. In 2025, aluminum
operations sales, including those of our ancillary recycled aluminum deox-rod facility, totaled $473.9 million, an increase of 49%, compared to
$318.7 million in 2024 primarily due to the volumes from the aluminum flat rolled products mill beginning in the second half of 2025.
Consolidated Results
Consolidated Results 2025 vs. 2024
Selling, General and Administrative Expenses. Selling, general and administrative expenses of $765.3 million during 2025 increased 15%
from $664.1 million during 2024 primarily due to an increase in payroll and benefits expense primarily related to construction, start-up, and
commissioning costs associated with the recycled aluminum flat rolled products mill and satellite recycled aluminum slab centers during 2025.
Selling, general and administrative expenses represented 4.2% and 3.8% of net sales during 2025 and 2024, respectively.
Profit sharing expense during 2025 of $123.0 million decreased 25% from $164.9 million during 2024, consistent with decreased pretax
earnings. This decrease in profit sharing expense was the primary driver of decreased operating loss for our other operations of 11% in 2025
compared to 2024. Profit sharing expense for eligible employees is 8% of consolidated pretax income excluding noncontrolling interests and
other items. Refer to Note 10. Retirement Plans to the consolidated financial statements elsewhere in this report for further information.
Interest Expense, net of Capitalized Interest. During 2025, interest expense of $70.0 million increased 24% from $56.3 million during 2024.
This increase is primarily a result of higher outstanding long-term debt balances during 2025 compared to 2024 due to our issuance of senior
unsecured notes in March and November 2025.
Other (Income) Expense, net. Net other income was $87.0 million in 2025, compared to $96.2 million in 2024, a decrease of $9.2 million due
primarily to the impact of decreased interest income due to declining rates of return and lower invested cash balances in 2025 compared to
2024.
Income Tax Expense. Income tax expense of $305.7 million, at an effective income tax rate of 20.5%, during 2025 decreased 29% compared
to $432.9 million, at an effective income tax rate of 21.8%, during 2024, consistent with decreased pretax earnings. In July 2025, U.S. Congress
enacted the One Big Beautiful Bill Act ("OBBBA”), which included significant provisions modifying the U.S. tax framework. These legislative
changes did not and are not expected to have a material impact on 2025 and future effective tax rates, tax liabilities, and cash taxes. Refer to
Note 4. Income Taxes to the consolidated financial statements elsewhere in this report for additional information.

-- 45 of 100 --

Table of Contents
44
Included in the balance of unrecognized tax benefits at December 31, 2025, are potential benefits of $27.2 million that, if recognized, would
affect the effective tax rate. We recognize interest and penalties related to our tax contingencies on a net-of-tax basis in income tax expense.
During the year ended December 31, 2025, we recognized income from the decrease of interest expense and penalties of $340,000, net of tax. In
addition to the unrecognized tax benefits noted above, we had $3.7 million accrued for the payment of interest and penalties at December 31,
2025.
We file income tax returns in the U.S. federal jurisdiction as well as income tax returns in various state jurisdictions. The tax years 2022
through 2025 remain open to examination by the Internal Revenue Service and various state and local jurisdictions. At this time, we do not
believe there will be any significant examination adjustments that would result in a material change to our financial position, results of
operations or cash flows.
Liquidity and Capital Resources
Capital Resources and Long-term Debt. Our business is capital intensive and requires substantial expenditures for, among other things,
the purchase and maintenance of equipment used in our operations. Our short-term and long-term liquidity needs arise primarily from working
capital requirements, capital expenditures, including expansion projects, principal and interest payments related to our outstanding
indebtedness, dividends to our shareholders, potential stock repurchases and acquisitions or investments. We have met and intend to
continue to meet these liquidity requirements primarily with available cash and cash provided by operations, long-term borrowings, and we
also have availability under our unsecured Revolver. Our liquidity at December 31, 2025, is as follows (in thousands):
Cash and equivalents 	$ 	769,878
Short-term and other investments 	255,731
Unsecured revolver availability 	1,190,820
Total liquidity 	$ 	2,216,429
Our total outstanding debt of $4.2 billion increased $980.2 million compared to December 31, 2024, due to our issuance of $600.0 million of
5.250% notes due 2035 and $400.0 million of 5.750% notes due 2055 in March 2025 and $650.0 million of 4.000% notes due 2028 and an
additional $150.0 million of 5.250% notes due 2035 in November 2025 as described in Note 3, the proceeds of which were used to redeem our
$400.0 million of 2.400% notes due June 2025 and our $400.0 million of 5.000% notes due December 2026, and other general corporate
purposes. Our total long-term debt to capitalization ratio (representing our long-term debt, including current maturities, divided by the sum of
our long-term debt, redeemable noncontrolling interests, and our total stockholders’ equity) was 32.1% and 26.5% at December 31, 2025, and
December 31, 2024, respectively.
Our unsecured credit agreement has a senior unsecured revolving credit facility (Facility), which provides a $1.2 billion Revolver and
matures in July 2028. Subject to certain conditions, we have the ability to increase the Facility size by $500.0 million. The unsecured Revolver
is available to fund working capital, capital expenditures, and other general corporate purposes. The Facility contains financial covenants and
other covenants pertaining to our ability to incur indebtedness and permit liens on certain assets. Our ability to borrow funds within the terms
of the unsecured Revolver is dependent upon our continued compliance with the financial and other covenants. At December 31, 2025, we had
$1.2 billion of availability on the Revolver, $9.2 million of outstanding letters of credit and other obligations which reduce availability, and
there were no borrowings outstanding.
The financial covenants under our Facility state that we must maintain an interest coverage ratio of not less than 2.50:1.00. Our interest
coverage ratio is calculated by dividing our last-twelve-months (LTM) consolidated EBITDA as defined in the Facility (earnings before
interest, taxes, depreciation, amortization, and certain other non-cash transactions as defined in the Facility) by our LTM gross interest
expense, less amortization of financing fees. In addition, a debt to capitalization ratio of not more than 0.60:1.00 must be maintained. At
December 31, 2025, our interest coverage ratio and debt to capitalization ratio were 13.33:1.00 and 0.32:1.00, respectively. We were in
compliance with these covenants at December 31, 2025, and we anticipate we will continue to be in compliance during the next twelve months.
Working Capital (representing excess of current assets over current liabilities). We generated cash flow from operations of $1.4 billion
in 2025 compared to $1.8 billion in 2024. Working capital increased $1.1 billion, or 33%,

-- 46 of 100 --

Table of Contents
45
during 2025 to $4.4 billion at December 31, 2025, due to a $265.5 million increase in accounts receivable, as well as a $624.8 million dollar
increase in inventories, primarily within our aluminum operations segment as our recycled aluminum flat rolled products mill began
commissioning and operations in the second half of 2025.
Capital Investments. During 2025, we invested $948.0 million in property, plant and equipment, primarily within our aluminum operations
and steel operations segments, compared with $1.9 billion invested during 2024. Our liquidity of $2.2 billion and anticipated future operating
cash flow generation is sufficient to provide for our planned 2026 capital requirements.
Cash Dividends. As a reflection of continued confidence in our current and future cash flow generation capability and financial position,
we increased our quarterly cash dividend by 9% to $0.50 per share in the first quarter of 2025 (from $0.46 per share for each quarter in 2024),
resulting in declared cash dividends of $294.1 million during 2025, compared to $284.1 million during 2024. We paid cash dividends of $291.2
million and $282.6 million during 2025 and 2024, respectively. Our board of directors approves the payment of dividends on a quarterly basis.
The determination to pay cash dividends in the future is at the discretion of our board of directors, after taking into account various factors
provided by executive management, including our financial condition, results of operations, outstanding indebtedness, current and
anticipated cash needs and growth plans.
Other. Our board of directors has authorized share repurchase programs during prior years and the current year, the most recent of which
occurred in February 2025 for a program of up to $1.5 billion of the company’s common stock. Under the share repurchase programs,
purchases take place as and when we determine in open market or private transactions made based upon the market price of our common
stock, the nature of other investment opportunities or growth projects, our cash flows from operations, and general economic conditions. The
share repurchase programs do not require us to acquire any specific number of shares, and may be modified, suspended, extended, or
terminated by us at any time. The share repurchase programs do not have an expiration date. There were $900.9 million and $1.2 billion of share
repurchases during 2025 and 2024, respectively. As of December 31, 2025, we had $801.0 million remaining available to purchase under the
February 2025 share repurchase program. See Part II, Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and
Issuer Purchases of Equity Securities for additional information.
Our ability to meet our debt service obligations and reduce our total debt will depend upon our future performance which, in turn, will
depend upon general economic, financial, and business conditions, along with competition, legislation and regulatory factors that are largely
beyond our control. In addition, we cannot assure that our operating results, cash flows, access to credit markets and capital resources will be
sufficient for repayment of our indebtedness in the future. We believe that based upon current levels of operations and anticipated growth,
cash flows from operations, together with other available sources of funds, including borrowings under our Facility, if necessary, will be
adequate for the next twelve months for making required payments of principal and interest on our indebtedness, funding working capital
requirements, and funding anticipated capital expenditures.
Contractual Obligations and Other Long-Term Liabilities
We have the following minimum commitments under contractual obligations, including purchase obligations, as defined by the Securities
and Exchange Commission. A "purchase obligation” is defined as an agreement to purchase goods or services that is enforceable and legally
binding and that specifies all significant terms, including fixed or minimum quantities to be purchased; fixed, minimum or variable price
provisions; and the approximate timing of the transaction.
Long-term debt and estimated interest. Refer to Note 3. Long-Term Debt to the consolidated financial statements elsewhere in this report
for our long-term debt maturities. Estimated interest payments on our senior unsecured notes were determined based on their outstanding
balances through maturity at their contractual interest rates, as detailed in Note 3. Estimated interest payments also include a 0.175%
commitment fee on our available Revolver, and an average interest rate of 5.44% on our other debt of $36.6 million. Our estimated interest
payments are $180.5 million, $177.4 million, $168.5 million, $144.6 million, and $129.9 million, for the years 2026 through 2030, respectively, and
$1.1 billion thereafter.

-- 47 of 100 --

Table of Contents
46
Purchase obligations. We have commitments for the purchase of commodities such as electricity, water, natural gas and its
transportation services, fuel, air products, zinc, and electrodes. Refer to Note 8. Commitments and Contingencies to the consolidated financial
statements elsewhere in this report for this information.
Construction commitments. We have firm contracts with various vendors for the completion of certain construction projects at our
various divisions at December 31, 2025. Refer to Note 8. Commitments and Contingencies to the consolidated financial statements elsewhere
in this report for this information.
Lease commitments. We have entered into operating leases relating principally to transportation and other equipment, and some real
estate. Refer to Note 11. Leases to the consolidated financial statements elsewhere in this report for this information.
Unrecognized tax benefits. We expect to make cash outlays in the future related to our unrecognized tax benefits; however, due to the
uncertainty of the timing, we are unable to make reasonably reliable estimates regarding the period of cash settlement with the respective
taxing authorities. Refer to Note 4. Income Taxes to the consolidated financial statements elsewhere in this report for this information.
Other Matters
Environmental and Other Contingencies
We have incurred, and in the future will continue to incur, capital expenditures and operating expenses for matters relating to
environmental control, remediation, monitoring, and compliance. During 2025, we incurred costs related to the monitoring and compliance of
environmental matters in the amount of approximately $60.4 million and capital expenditures related to environmental compliance of
approximately $10.0 million. Of the costs incurred during 2025 for monitoring and compliance, approximately 72% were related to the normal
transportation and disposal of certain types of by-products produced in our steelmaking processes and other facilities in accordance with
legal requirements. We incurred combined environmental remediation costs of approximately $9.3 million at all of our facilities during 2025. We
have an accrual of $4.4 million recorded for environmental remediation related to our metals recycling operations, $2.6 million related to our
idled Minnesota ironmaking operations, and $566,000 related to our steel operations. We believe, apart from our dependence on environmental
construction and operating permits for our existing and any future manufacturing facilities, that compliance with current environmental laws
and regulations is not likely to have a materially adverse effect on our financial condition, results of operations, or liquidity. However,
environmental laws and regulations evolve and change, and we may become subject to more stringent environmental laws and regulations in
the future, such as the impact of various governmental legislatures and agencies introducing regulatory changes in response to the potential
of climate change.
Critical Accounting Estimates
Management’s Discussion and Analysis of Our Financial Condition and Results of Operations is based upon our consolidated financial
statements, which have been prepared in accordance with accounting principles generally accepted in the United States. We review the
accounting estimates we use in reporting our financial results on a regular basis. The preparation of these financial statements requires us to
make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and related disclosure of
contingent liabilities. We evaluate the appropriateness of these estimations and judgments on an ongoing basis. We base our estimates on
historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form
the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Results may
differ from these estimates due to actual outcomes being different from those on which we based our assumptions. We believe the following
critical accounting estimates affect our more significant judgments and estimates used in the preparation of our consolidated financial
statements.

-- 48 of 100 --

Table of Contents
47
Impairments of Long-Lived Tangible and Definite-Lived Intangible Assets. We review long-lived assets for impairment whenever
events or changes in circumstances indicate the carrying amount of such assets may not be fully recoverable. Impairment losses are recorded
on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated
by those assets are less than the assets’ carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its
carrying amount. We consider various factors and determine whether an impairment test is necessary, including by way of examples, a
significant and prolonged deterioration in operating results and/or projected cash flows, significant changes in the extent or manner in which
an asset is used, technological advances with respect to assets which would potentially render them obsolete, our strategy and capital
planning, and the economic environment in markets to be served. When determining future cash flows, and, if necessary, fair value, we must
make judgments as to the expected utilization of assets and estimated future cash flows related to those assets. We consider historical and
anticipated future results, general economic and market conditions, the impact of planned business and operational strategies, and all other
available information at the time the estimates are made. Those estimates and judgments may or may not ultimately prove accurate. There were
no material indicators of impairment or impairment charges recorded during 2025, 2024, or 2023.
Goodwill.
Our goodwill, relating to various business combinations, consisted of the following at December 31, 2025 and 2024 (in thousands):
Steel Operations Segment 	$ 	272,133
Aluminum Operations Segment 	14,000
Metals Recycling Operations Segment 	189,413
Steel Fabrication Operations Segment 	1,925
$ 	477,471
At least once annually (as of October 1), or when indicators of impairment exist, we perform a goodwill impairment analysis. Goodwill is
allocated to various reporting units, which are generally one level below the company’s operating segments. If the fair value exceeds the
carrying value of the reporting unit, there is no impairment. If the carrying amount exceeds the fair value, we recognize an impairment loss in
the amount by which the carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, with the
impairment loss not to exceed the amount of goodwill allocated to the reporting unit. We have the option to consider qualitative factors to
assess if it is more likely than not that the fair value of a reporting unit exceeds its carrying value. If we elect to bypass the qualitative
assessment or if indications of a potential impairment exist, we perform a quantitative test.
When conducting a qualitative assessment, we consider the impact of several factors on the company overall and each reporting unit
individually including the timing and results of prior quantitative tests performed, changes in the carrying amount of the reporting unit,
macroeconomic conditions (including changes in interest and discount rates), industry and market conditions, recent and projected financial
performance, the company’s competitive position and other factors. Significant judgment is involved in evaluating the totality of all factors to
determine whether it is more likely than not that the fair value of the reporting unit exceeds its carrying value.
When conducting a quantitative test, the fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a
risk-adjusted discount rate to calculate the net present value of future cash flows (income approach), and for some years by using a market
approach based upon an analysis of valuation metrics of comparable peer companies, using Level 3 fair value inputs as provided for under
ASC 820. Key assumptions used to determine the estimated fair value of each reporting unit under the discounted cash flows method (income
approach) include: (a) expected cash flows for the five-year period following the testing date (including market share, sales volumes and
prices, costs to produce and estimated capital needs); (b) an estimated terminal value using a terminal year growth rate determined based on
the growth prospects of the reporting unit; and (c) a risk-adjusted discount rate based on management’s best estimate of market participants’
after-tax weighted average cost of capital and market risk premiums. Key assumptions used to determine the estimated fair value of each
reporting unit under the market approach include the expected revenues and cash flows in the next year. We consider historical and
anticipated future results, general

-- 49 of 100 --

Table of Contents
48
economic and market conditions, the impact of planned business and operational strategies and all available information at the time the fair
values of reporting units are estimated. Those estimates and judgments may or may not ultimately prove accurate.
Goodwill acquired in past transactions is naturally more susceptible to impairment, primarily due to the fact that they are recorded at fair
value based on operating plans and economic conditions at the time of acquisition. Consequently, if operating results and/or economic
conditions deteriorate after an acquisition, it could result in the impairment of the acquired asset. A deterioration of economic conditions may
not only negatively impact the estimated operating cash flows used in our cash flow models but may also negatively impact other
assumptions used in our analyses, including, but not limited to, the estimated cost of capital and/or discount rates. Additionally, we are
required to ensure that assumptions used to determine fair value in our analyses are consistent with the assumptions a hypothetical
marketplace participant would use. As a result, the cost of capital and/or discount rates used in our analyses may increase or decrease based
on market conditions and trends, regardless of whether our actual cost of capital has changed. Therefore, we may recognize an impairment in
spite of realizing actual cash flows that are approximately equal to or greater than our previously forecasted amounts. Accordingly, our
qualitative assessments consider changes in interest rates and our quantitative tests include discount rate scenario analysis to evaluate the
impact on estimated reporting unit fair values.
Our fourth quarter 2025, 2024, and 2023 annual goodwill impairment analyses did not result in any impairment charges. During 2025 and
2024, we performed a qualitative assessment and performed a quantitative test in 2023. Management does not believe that it is reasonably
likely that our reporting units will fail the goodwill impairment test in the near term, given the results of our most recent qualitative assessment
and the determined fair value of the reporting units with goodwill from our most recent quantitative test exceeded their carrying value by more
than an insignificant amount. Changes in judgments and estimates underlying our analysis of goodwill for possible impairment, including
expected future operating cash flows and discount rate, could decrease the estimated fair value of our reporting units in the future and could
result in an impairment of goodwill.
Income Taxes. We are required to estimate our income taxes as a part of the process of preparing our consolidated financial statements.
This requires us to estimate our actual current tax exposure together with assessing temporary differences resulting from differing treatments
of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our
consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be recovered from future taxable income and,
to the extent we believe that recovery is not likely, we must establish a valuation allowance. We also establish reserves to reduce some or all
of the tax benefit of any of our tax positions at the time we determine that the positions become uncertain. We adjust these reserves, including
any impact on the related interest and penalties, in light of changing facts and circumstances, such as the progress of a tax audit. A number
of years may elapse before a particular matter for which we have established a reserve is audited by a taxing authority and finally resolved.
The number of years with open tax audits varies depending on the tax jurisdiction. A tax benefit that has been previously reserved because of
a failure to meet the "more likely than not" recognition threshold would be recognized in our income tax expense in the first interim period
when the uncertainty disappears. Settlement of any particular issue would usually require the use of cash.

-- 50 of 100 --

Table of Contents
49
ITEM 7A. 	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Market Risk
In the normal course of business, we are exposed to interest rate changes. Our objectives in managing fluctuations in interest rates are to
limit the impact of these rate changes on earnings and cash flows and to lower overall borrowing costs.
The following table represents the principal cash repayments and related weighted-average interest rates by maturity date for our long-
term debt, as of December 31, 2025 (in thousands):
Interest Rate Risk
Fixed Rate 	Variable Rate
Average 	Average
Principal 	Rate 	Principal 	Rate
Expected maturity date:
2026 	$ 	1,493 	5.2% 	$ 	33,162 	5.5%
2027 	351,099 	1.7 	-
2028 	650,416 	4.0 	-
2029 	198 	5.1 	-
2030 	600,095 	3.5 	-
Thereafter 	2,650,147 	4.7 	-
Total debt outstanding 	$ 	4,253,448 	4.2% 	$ 	33,162 	5.5%
Fair value 	$ 	4,108,867 	$ 	33,162
Commodity Risk
In the normal course of business, we are exposed to the market risk and price fluctuations related to the sale of our products and to the
purchase of raw materials used in our operations, such as metallic raw materials, electricity, water, natural gas and its transportation services,
fuel, air products, zinc, and electrodes. Our risk strategy associated with product sales has generally been to obtain competitive prices for our
products and to allow operating results to reflect market price movements dictated by supply and demand.
Our risk strategy associated with the purchase of raw materials utilized within our operations has generally been to make some
commitments with suppliers relating to future expected requirements for some commodities such as electricity, water, natural gas and its
transportation services, fuel, air products, zinc, and electrodes. Refer to Note 8. Commitments and Contingencies to the consolidated financial
statements elsewhere in this report for additional information.
In our metals recycling, aluminum, and steel operations, we have certain fixed price contracts with various customers and suppliers for
future delivery of nonferrous and ferrous metals. We believe these contracts will be fully consummated. Our risk strategy has been to enter
into base metal financial contracts with the goal to protect the profit margin, within certain parameters, that was contemplated when we entered
into the transaction with the customer or vendor. At December 31, 2025, we had a cumulative unrealized loss associated with these financial
contracts of $56.0 million, substantially all of which have settlement dates in 2026.

-- 51 of 100 --

Table of Contents
50
ITEM 8. 	CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Page
Management’s Report on Internal Control Over Financial Reporting 	51
Reports of Independent Registered Public Accounting Firm (PCAOB ID 42) 	52
Consolidated Balance Sheets as of December 31, 2025 and 2024 	56
Consolidated Statements of Income for each of the three years in the period ended December 31, 2025 	57
Consolidated Statements of Comprehensive Income for each of the three years in the period ended December 31, 2025 	58
Consolidated Statements of Equity for each of the three years in the period ended December 31, 2025 	59
Consolidated Statements of Cash Flows for each of the three years in the period ended December 31, 2025 	60
Notes to Consolidated Financial Statements 	61

-- 52 of 100 --

Table of Contents
51
MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
The management of Steel Dynamics, Inc. is responsible for the preparation and integrity of the company’s consolidated financial
statements and for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a –
15(f) of the Exchange Act, for the company (including its consolidated subsidiaries). We maintain accounting and internal control systems
which are intended to provide reasonable assurance that assets are safeguarded against loss from unauthorized use or disposition,
transactions are executed in accordance with management’s authorization, and accounting records are reliable for preparing financial
statements in accordance with accounting principles generally accepted in the United States. We are dedicated to ensuring that we maintain
the high standards of financial accounting and reporting that we have established. Our culture demands integrity and an unyielding
commitment to strong internal control practices and policies.
Internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in
reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (2) provide reasonable assurance that
transactions are recorded as necessary to permit preparation of the financial statements in accordance with generally accepted accounting
principles; and provide reasonable assurance that our receipts and expenditures are being made only in accordance with authorizations of our
management and directors; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or
disposition of our assets that could have a material effect on our financial statements.
Because of its inherent limitations, internal control over financial reporting may not always prevent or detect misstatements. Also,
projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of
changes in conditions, or that the degree of compliance with policies and procedures may deteriorate.
We completed the acquisition of the remaining 55% interest in New Process Steel, L.P. (NPS) on December 1, 2025. In conducting our
evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2025, we have elected to exclude NPS from
our evaluation in the year of acquisition as permitted by the Securities and Exchange Commission. NPS constituted approximately 3% and 5%
of the company’s total and net assets, respectively, as of December 31, 2025, and 0.4% of the company’s net sales for the year then ended.
Under the supervision and with the participation of our management, including our principal executive officer and our principal financial
officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting. The framework on which such
evaluation was based upon is contained in the report entitled "Internal Control—Integrated Framework” issued by the Committee of
Sponsoring Organizations of the Treadway Commission (2013 Framework) (the "COSO criteria”). Based on that evaluation, management
concluded that our internal control over financial reporting was effective as of December 31, 2025, the end of the period covered by this report.
/s/ Mark D. Millett 	/s/ Theresa E. Wagler
Chief Executive Officer 	Executive Vice President and Chief Financial Officer
(Principal Executive Officer) 	(Principal Financial Officer)

-- 53 of 100 --

Table of Contents
52
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Stockholders and the Board of Directors of Steel Dynamics, Inc.
Opinion on Internal Control Over Financial Reporting
We have audited Steel Dynamics, Inc.’s internal control over financial reporting as of December 31, 2025, based on criteria established in
Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework)
(the COSO criteria). In our opinion, Steel Dynamics, Inc. (the Company) maintained, in all material respects, effective internal control over
financial reporting as of December 31, 2025, based on the COSO criteria.
As indicated in the accompanying Management's Report on Internal Control Over Financial Reporting, management's assessment of and
conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of New Process Steel, L.P.,
which is included in the 2025 consolidated financial statements of the Company and constituted 3% and 5% of total and net assets,
respectively, as of December 31, 2025, and 0.4% of net sales, for the year then ended. Our audit of internal control over financial reporting of
the Company also did not include an evaluation of the internal control over financial reporting of New Process Steel, L.P.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the
consolidated balance sheets of the Company as of December 31, 2025 and 2024, the related consolidated statements of income, comprehensive
income, equity, and cash flows for each of the three years in the period ended December 31, 2025, and the related notes and our report dated
February 27, 2026 expressed an unqualified opinion thereon.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the
effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over
Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance
with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to
obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists,
testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other
procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of
financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting
principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of
records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide
reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally
accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of
management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized
acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any
evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or
that the degree of compliance with the policies or procedures may deteriorate.

-- 54 of 100 --

Table of Contents
53
/s/ Ernst & Young LLP
Indianapolis, Indiana
February 27, 2026

-- 55 of 100 --

Table of Contents
54
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Stockholders and the Board of Directors of Steel Dynamics, Inc.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Steel Dynamics, Inc. (the Company) as of December 31, 2025 and 2024, the
related consolidated statements of income, comprehensive income, equity and cash flows for each of the three years in the period ended
December 31, 2025, and the related notes (collectively referred to as the "consolidated financial statements”). In our opinion, the consolidated
financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2025 and 2024, and the results
of its operations and its cash flows for each of the three years in the period ended December 31, 2025, in conformity with U.S. generally
accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the
Company’s internal control over financial reporting as of December 31, 2025, based on criteria established in Internal Control-Integrated
Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), and our report dated
February 27, 2026 expressed an unqualified opinion thereon.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company’s
financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with
respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and
Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to
obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits
included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and
performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and
disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by
management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis
for our opinion.
Critical Audit Matters
The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were
communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the
financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit
matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating
the critical audit matters below, providing a separate opinion on the critical audit matters or on the account or disclosure to which it relates.

-- 56 of 100 --

Table of Contents
55
Valuation of Goodwill
Description of
the Matter
At December 31, 2025, the Company’s goodwill was approximately $477 million. As discussed in Note 1 of the
consolidated financial statements, the Company performs an impairment test for goodwill at least annually or when
indicators of impairment exist. The Company performed a qualitative assessment as of October 1, 2025, to assess if it is
more likely than not that the fair value of a reporting unit exceeds its carrying amount.
Auditing management’s annual goodwill impairment test was complex and judgmental as management considers the
impact of several factors on the Company overall and each reporting unit individually including assessing the qualitative
factors to be considered in the qualitative goodwill impairment assessment, changes in the carrying amount of the
reporting unit, macroeconomic conditions (including changes in interest and discount rates), industry and market
conditions, recent and projected financial performance, the Company’s competitive position and other factors. Significant
judgment is involved in evaluating the totality of all factors to determine whether it is more likely than not that the fair
value of the reporting unit exceeds its carrying value.
How We
Addressed the
Matter in Our
Audit
We obtained an understanding, evaluated the design and tested the operating effectiveness of controls over the
Company’s goodwill impairment testing process, including controls over management’s review of the qualitative factors
described above.
To test management’s conclusion that it is more likely than not that the fair values of the Company’s reporting units
exceed their carrying amounts, we performed audit procedures that included, among others, assessing the
reasonableness of the qualitative factors considered within the analyses, testing the evaluation of the qualitative factors
and the underlying data used by the Company in its analyses. We evaluated management’s assessment of the qualitative
factors for each reporting unit by comparing to current industry and economic trends, current and historical results and
key business drivers for each reporting unit, comparing the Company’s share price trends to historical amounts, and
other relevant factors, including considering consistency with evidence obtained in other parts of the audit and
evaluating whether any contrary evidence exists.
Valuation of Acquired Customer Relationships Intangible Asset
Description of
the Matter
As described in Note 2 to the consolidated financial statements, on December 1, 2025, the Company completed the
acquisition of the remaining 55% interest in New Process Steel, L.P. for a purchase price of $229 million. The Company
measured the assets and liabilities assumed at fair value, which resulted in the recognition of a customer relationships
intangible asset of $96 million.
Auditing the valuation of the acquired customer relationships intangible asset required auditor judgment due to the
nature and extent of audit effort in evaluating certain assumptions required to estimate the fair value using a multi-period
excess earnings method, which is a specific discounted cash flow method. In particular, the fair value measurement of
customer relationships utilized management’s forecasts of revenue growth rates and projected margins to estimate the
discounted cash flows.
How We
Addressed the
Matter in Our
Audit
We obtained an understanding, evaluated the design and tested the operating effectiveness of controls over the
Company’s process to estimate the fair value of the acquired customer relationships intangible asset, including controls
over management’s review of the significant assumption described above.
To test the fair value estimate of the customer relationships intangible asset, we performed audit procedures which
included, among others, testing the significant assumptions described above, testing the completeness and accuracy of
the underlying data, and evaluating the valuation methodology with the assistance of our valuation specialists. We
compared the significant assumptions to current industry and economic trends and historical results of the acquired
business. We performed sensitivity analyses to evaluate the impact of changes in the significant assumptions to the fair
value of the customer relationships intangible asset.
/s/ Ernst & Young LLP
We have served as the Company’s auditor since 1999.
Indianapolis, Indiana
February 27, 2026

-- 57 of 100 --

Table of Contents
56
STEEL DYNAMICS, INC.
CONSOLIDATED BALANCE SHEETS
(in thousands, except share data)
December 31,
Assets 	2025 	2024
Current assets
Cash and equivalents 	$ 	769,878 	$ 	589,464
Short-term investments 	- 	147,811
Accounts receivable, net of allowances for credit losses of $5,419 and $7,728
as of December 31, 2025 and 2024, respectively 	1,680,249 	1,362,969
Accounts receivable-related parties 	2,411 	54,230
Inventories 	3,738,516 	3,113,733
Other current assets 	293,117 	163,131
Total current assets 	6,484,171 	5,431,338
Property, plant and equipment, net 	8,569,466 	8,117,988
Intangible assets, net 	331,290 	227,234
Goodwill 	477,471 	477,471
Other assets 	557,382 	681,202
Total assets 	$ 	16,419,780 	$ 	14,935,233
Liabilities and Equity
Current liabilities
Accounts payable 	$ 	1,223,776 	$ 	972,645
Accounts payable-related parties 	7,582 	7,267
Income taxes payable 	67,315 	3,783
Accrued payroll and benefits 	361,494 	373,216
Accrued expenses 	427,432 	366,682
Current maturities of long-term debt 	34,655 	426,990
Total current liabilities 	2,122,254 	2,150,583
Long-term debt 	4,176,508 	2,804,017
Deferred income taxes 	1,004,375 	902,186
Other liabilities 	186,232 	133,201
Total liabilities 	7,489,369 	5,989,987
Commitments and contingencies
Redeemable noncontrolling interests 	141,226 	171,212
Equity
Common stock voting, $.0025 par value; 900,000,000 shares authorized;
268,644,427 and 268,377,165 shares issued; and 144,940,102 and 151,117,153
shares outstanding, as of December 31, 2025 and 2024, respectively 	653 	652
Treasury stock, at cost; 123,704,325 and 117,260,012 shares,
as of December 31, 2025 and 2024, respectively 	(7,980,549) 	(7,094,266)
Additional paid-in capital 	1,248,634 	1,229,819
Retained earnings 	15,689,042 	14,798,082
Accumulated other comprehensive loss 	(598) 	-
Total Steel Dynamics, Inc. equity 	8,957,182 	8,934,287
Noncontrolling interests 	(167,997) 	(160,253)
Total equity 	8,789,185 	8,774,034
Total liabilities and equity 	$ 	16,419,780 	$ 	14,935,233
See notes to consolidated financial statements.

-- 58 of 100 --

Table of Contents
57
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF INCOME
(in thousands, except per share data)
Years Ended December 31,
2025 	2024 	2023
Net sales
Unrelated parties 	$ 	17,554,583 $ 	16,819,648 $ 	18,115,312
Related parties 	621,998 	720,742 	680,004
Total net sales 	18,176,581 	17,540,390 	18,795,316
Costs of goods sold 	15,784,398 	14,737,804 	14,749,433
Gross profit 	2,392,183 	2,802,586 	4,045,883
Selling, general and administrative expenses 	765,308 	664,119 	588,621
Profit sharing 	122,986 	164,904 	272,033
Amortization of intangible assets 	27,903 	30,526 	34,048
Operating income 	1,475,986 	1,943,037 	3,151,181
Interest expense, net of capitalized interest 	70,043 	56,347 	76,484
Other (income) expense, net 	(87,028) 	(96,191) 	(144,246)
Income before income taxes 	1,492,971 	1,982,881 	3,218,943
Income tax expense 	305,660 	432,925 	751,611
Net income 	1,187,311 	1,549,956 	2,467,332
Net income attributable to noncontrolling interests 	(1,716) 	(12,822) 	(16,450)
Net income attributable to Steel Dynamics, Inc. 	$ 	1,185,595 $ 	1,537,134 $ 	2,450,882
Basic earnings per share attributable to Steel Dynamics,
Inc. stockholders 	$ 	8.02 $ 	9.89 $ 	14.72
Weighted average common shares outstanding 	147,806 	155,420 	166,552
Diluted earnings per share attributable to Steel Dynamics, Inc.
stockholders, including the effect of assumed conversions
when dilutive 	$ 	7.99 $ 	9.84 $ 	14.64
Weighted average common shares and share equivalents outstanding 	148,404 	156,136 	167,431
Dividends declared per share 	$ 	2.00 	$ 	1.84 	$ 	1.70
See notes to consolidated financial statements.

-- 59 of 100 --

Table of Contents
58
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(in thousands)
Years Ended December 31,
2025 	2024 	2023
Net income 	$ 	1,187,311 $ 	1,549,956 $ 	2,467,332
Other comprehensive loss - net unrealized loss on cash flow
hedging derivatives, net of income tax benefits of $192, $135, $149,
for 2025, 2024 and 2023, respectively 	(598) 	(421) 	(468)
Comprehensive income 	1,186,713 	1,549,535 	2,466,864
Comprehensive income attributable to noncontrolling interests 	(1,716) 	(12,822) 	(16,450)
Comprehensive income attributable to Steel Dynamics, Inc. 	$ 	1,184,997 $ 	1,536,713 $ 	2,450,414
See notes to consolidated financial statements.

-- 60 of 100 --

Table of Contents
59
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF EQUITY
(in thousands)
Accumulated
Additional 	Other 	Redeemable
Shares 	Common Treasury 	Paid-In 	Retained 	Comprehensive Noncontrolling 	Total 	Noncontrolling
Common Treasury 	Stock 	Stock 	Capital 	Earnings 	Income (Loss) 	Interests 	Equity 	Interests
Balances at January 1, 2023 	172,936 	94,826 $ 	650 $ (4,459,513)$ 1,212,566 $ 11,375,765 $ 	889 $ 	(216,055)$ 7,914,302 $ 	181,503
Dividends declared 	- 	- 	- 	- 	- 	(280,501) 	- 	- 	(280,501) 	-
Noncontrolling investors, net 	- 	- 	- 	- 	- 	- 	- 	1,254 	1,254 	(10,291)
Share repurchases 	(13,394) 	13,394 	- (1,452,203) 	- 	- 	- 	- 	(1,452,203) 	-
Equity-based compensation 	476 	(125) 	1 	14,110 	5,044 	(556) 	- 	- 	18,599 	-
Net income 	- 	- 	- 	- 	- 	2,450,882 	- 	16,450 	2,467,332 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	- 	- 	(468) 	- 	(468) 	-
Balances at December 31, 2023 	160,018 	108,095 $ 	651 $ (5,897,606)$ 1,217,610 $ 13,545,590 $ 	421 $ 	(198,351)$ 8,668,315 $ 	171,212
Dividends declared 	- 	- 	- 	- 	- 	(284,122) 	- 	- 	(284,122) 	-
Noncontrolling investors, net 	- 	- 	- 	- 	1,350 	- 	- 	25,276 	26,626 	-
Share repurchases 	(9,432) 	9,432 	- (1,212,164) 	- 	- 	- 	- 	(1,212,164) 	-
Equity-based compensation 	531 	(267) 	1 	15,504 	10,859 	(520) 	- 	- 	25,844 	-
Net income 	- 	- 	- 	- 	- 	1,537,134 	- 	12,822 	1,549,956 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	- 	- 	(421) 	- 	(421) 	-
Balances at December 31, 2024 	151,117 	117,260 $ 	652 $ (7,094,266)$ 1,229,819 $ 14,798,082 $ 	- $ 	(160,253)$ 8,774,034 $ 	171,212
Dividends declared 	- 	- 	- 	- 	- 	(294,132) 	- 	- 	(294,132) 	-
Noncontrolling investors, net 	- 	- 	- 	- 	- 	- 	- 	(9,460) 	(9,460) 	(29,986)
Share repurchases 	(6,680) 	6,680 	- 	(900,870) 	- 	- 	- 	- 	(900,870) 	-
Equity-based compensation 	503 	(236) 	1 	14,587 	18,815 	(503) 	- 	- 	32,900 	-
Net income 	- 	- 	- 	- 	- 	1,185,595 	- 	1,716 	1,187,311 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	- 	- 	(598) 	- 	(598) 	-
Balances at December 31, 2025 	144,940 	123,704 $ 	653 $ (7,980,549)$ 1,248,634 $ 15,689,042 $ 	(598) $ 	(167,997)$ 8,789,185 $ 	141,226
See notes to consolidated financial statements.

-- 61 of 100 --

Table of Contents
60
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(in thousands)
Years Ended December 31,
2025 	2024 	2023
Operating activities:
Net income 	$ 	1,187,311 $ 	1,549,956 $ 	2,467,332
Adjustments to reconcile net income to net cash provided by
operating activities:
Depreciation and amortization 	551,390 	478,907 	437,804
Equity-based compensation 	68,983 	66,589 	61,744
Deferred income taxes 	94,397 	(42,583) 	55,665
Other adjustments 	(10,208) 	(5,507) 	(19,716)
Changes in certain assets and liabilities:
Accounts receivable 	(157,456) 	191,108 	446,765
Inventories 	(423,435) 	(221,036) 	232,282
Other assets 	(77,276) 	(13,718) 	(23,777)
Accounts payable 	206,843 	(67,361) 	(30,148)
Income taxes receivable/payable 	52,179 	10,183 	56,756
Accrued expenses 	(43,194) 	(102,035) 	(164,779)
Net cash provided by operating activities 	1,449,534 	1,844,503 	3,519,928
Investing activities:
Purchases of property, plant and equipment 	(948,025) 	(1,868,006) 	(1,657,905)
Purchases of short-term investments 	(39,571) 	(739,340) 	(1,145,493)
Proceeds from maturities of short-term investments 	186,996 	1,312,294 	1,054,742
Business combinations, net of cash acquired 	(175,774) 	- 	-
Other investing activities 	1,417 	(8,308) 	(221,593)
Net cash used in investing activities 	(974,957) 	(1,303,360) 	(1,970,249)
Financing activities:
Issuance of current and long-term debt 	3,553,683 	2,482,919 	1,365,664
Repayment of current and long-term debt 	(2,567,864) 	(2,324,058) 	(1,367,553)
Dividends paid 	(291,176) 	(282,616) 	(271,317)
Purchases of treasury stock 	(900,870) 	(1,212,164) 	(1,452,203)
Other financing activities 	(88,088) 	(16,678) 	(51,725)
Net cash used in financing activities 	(294,315) 	(1,352,597) 	(1,777,134)
Increase (decrease) in cash and equivalents, and restricted cash 	180,262 	(811,454) 	(227,455)
Cash and equivalents, and restricted cash at beginning of period 	595,010 	1,406,464 	1,633,919
Cash and equivalents, and restricted cash at end of period 	$ 	775,272 $ 	595,010 $ 	1,406,464
Supplemental disclosure information:
Cash paid for interest 	$ 	156,749 $ 	100,978 $ 	103,165
See notes to consolidated financial statements.

-- 62 of 100 --

Table of Contents
61
Note 1. Description of the Business and Summary of Significant Accounting Policies
Description of the Business
Steel Dynamics, Inc. (SDI), together with its subsidiaries (the company), is a leading industrial metals solutions company, with facilities
located throughout the United States and Mexico. SDI is one of the largest domestic steel producers and metal recyclers in North America,
combined with a meaningful downstream steel fabrication platform. The company also has aluminum operations, further diversifying its
product offerings to supply aluminum flat rolled products with higher recycled content to the countercyclical, sustainable beverage can
industry, as well as the automotive and industrial sectors. The company has four reporting segments: steel operations, metals recycling
operations, steel fabrication operations, and aluminum operations. Approximately 4% of the company’s workforce in four locations is
represented by collective bargaining agreements, and agreements affecting 0.1% of the company’s employees at one location expires during
2026.
Steel Operations Segment
Steel operations include the company’s electric arc furnace (EAF) steel mills, including Butler Flat Roll Division, Columbus Flat Roll
Division, Southwest-Sinton Flat Roll Division, Structural and Rail Division, Engineered Bar Products Division, Roanoke Bar Division, and Steel
of West Virginia; steel coating and processing operations at The Techs, Heartland Flat Roll Division, United Steel Supply, New Process Steel,
L.P. ("NPS”) (acquired December 1, 2025), and Vulcan Threaded Products, Inc.; and warehouse operations in Mexico; and a 75% controlling
equity interest in SDI Biocarbon Solutions, LLC.
Metals Recycling Operations Segment
Metals recycling operations include the company’s Omni ferrous and nonferrous processing, transportation, marketing, brokerage, and
scrap management services primarily located throughout the United States and in Central and Northern Mexico.
Steel Fabrication Operations Segment
Steel fabrication operations include the company’s New Millennium Building Systems joist and deck plants located throughout the
United States, and in Northern Mexico. Revenues from these plants are generated from the fabrication of steel joists, joist girders and steel
deck systems used within the non-residential construction industry.
Aluminum Operations Segment
Aluminum operations include a 650,000-metric-ton recycled aluminum flat rolled products mill in Columbus, Mississippi; two 150,000-
metric-ton satellite recycled aluminum slab centers, one in Central Mexico and one under construction in the Southwest U.S.; and an ancillary
recycled aluminum deox-rod facility. The flat rolled products mill is a joint venture, of which SDI has a 94.4% controlling equity interest, with
Unity Aluminum, Inc. The aluminum flat rolled products mill began operations in the second half of 2025.
Other
Other operations consist of subsidiary operations that are below the quantitative thresholds required for reportable segments and
primarily consist of a joint venture and the company’s idled Minnesota ironmaking operations. Redeemable noncontrolling interests related to
Mesabi Nugget (owned 86% by SDI) are $111.2 million at December 31, 2025 and 2024. Also included in "Other” are certain unallocated
corporate accounts, such as the company’s senior unsecured credit facility, senior notes, certain other investments, and certain profit sharing
expenses.

-- 63 of 100 --

Table of Contents
62
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
Summary of Significant Accounting Policies
Principles of Consolidation
The consolidated financial statements include the accounts of SDI, together with its wholly- and majority-owned or controlled
subsidiaries, after elimination of intercompany accounts and transactions. Noncontrolling and redeemable noncontrolling interests represent
the noncontrolling owners' proportionate share in the equity, income, or losses of the company’s majority-owned or controlled consolidated
subsidiaries.
Use of Estimates
These consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States,
and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the
consolidated financial statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying
value of property, plant and equipment, intangible assets, and goodwill; allowances for credit losses for trade receivables, inventories and
deferred income tax assets; unrecognized tax benefits; potential environmental liabilities; and litigation claims and settlements. Actual results
may differ from these estimates and assumptions.
Revenue from Contracts with Customers
In the steel, metals recycling, and aluminum operations segments, revenue is recognized at the point in time the performance obligation is
satisfied, and control of the product is transferred to the customer upon shipment or delivery, at the amount of consideration the company
expects to receive, including any variable consideration. The variable consideration included in the company’s steel and aluminum operations
segment contracts, which is not constrained, includes estimated product returns and customer claims based on historical experience, and may
include volume rebates which are recorded on an expected value basis. Revenue recognized is limited to the amount the company expects to
receive. The company does not exercise significant judgments in determining the timing of satisfaction of performance obligations or the
transaction price. Shipment of products to customers is considered a fulfillment activity with amounts billed to customers included in the
amount of consideration for the products and costs associated with such activities included in cost of goods sold.
The company’s steel fabrication operations segment recognizes revenue over time at the amount of consideration the company expects to
receive. Revenue is measured on an output method representing completed fabricated tons to date as a percentage of total tons required for
each contract. Revenue from fabrication of tons remaining on partially fabricated customer contracts as of a reporting date, and future revenue
from yet to be fabricated customer contracts, has not been disclosed under the practical expedient in Accounting Standards Codification
(ASC) 606, Revenue from Contracts with Customers (ASC 606), paragraph ASC 606-10-50-14 related to customer contracts with expected
duration of one year or less. The company does not exercise significant judgments in determining the timing of satisfaction of performance
obligations or the transaction price. Shipment of products to customers, which occurs after control over the product has transferred to the
customer and revenue is recognized, is considered a fulfillment activity with amounts billed to customers included in the amount of
consideration for the products and costs associated with such activities included in cost of goods sold.
Payments from customers are generally due within 30 days of invoicing, which generally occurs upon shipment of the products. Shipment
for the steel fabrication operations segment generally occurs within 30 days of satisfaction of the performance obligation and revenue
recognition. The company does not have financing components. Payments from customers have historically been within these terms,
however, payments for non-U.S. sales may extend longer.
Refer to Note 12. Segment Information for disaggregated revenue by segment to external, external non-United States, and other segment
customers.

-- 64 of 100 --

Table of Contents
63
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
Credit Losses
The company is exposed to credit risk in the event of nonpayment of accounts receivable by customers. The company mitigates its
exposure to credit risk, which it generally extends on an unsecured basis, by performing ongoing credit evaluations and taking further action if
necessary, such as requiring letters of credit or other security interests to support the customer receivable. The allowance for credit losses for
accounts receivable is based on the company’s reasonable estimate of known credit risks and historical experience, adjusted for current and
anticipated economic and other pertinent factors affecting the company’s customers, that may differ from historical experience. Customer
accounts receivable are written off when all collection efforts have been exhausted and the amounts are deemed uncollectible.
At December 31, 2025 and 2024, the company reported $1,682.7 million and $1,417.2 million, respectively, of accounts receivable, net of
allowances for credit losses of $5.4 million and $7.7 million, respectively. Changes in the allowance were not significant for the years ended
December 31, 2025, 2024, or 2023.
Cash and Equivalents, and Restricted Cash
Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted
cash is primarily funds held in escrow as required by various insurance and government organizations. The balance of cash, cash equivalents
and restricted cash in the consolidated statements of cash flows includes restricted cash of $5.4 million at December 31, 2025, $5.5 million at
December 31, 2024, $5.6 million at December 31, 2023, and $5.5 million at December 31, 2022, which is recorded in Other Assets (noncurrent) in
the company’s consolidated balance sheets.
Short-Term Investments
Short-term investments include investments with maturity dates of longer than three months but less than one year when purchased. The
company’s short-term investments are classified as trading securities. There were no short-term investments held as of December 31, 2025.
Short-term investments held as of December 31, 2024 consisted of commercial paper ($19.7 million), US Treasuries ($113.1 million), and
certificates of deposit ($15.0 million). Interest income from invested cash and short-term investments was $36.8 million, $90.1 million, and $111.9
million for the years ended December 31, 2025, 2024, and 2023, respectively, and is recorded in other (income) expense, net as earned.
Inventories
Inventories are stated at lower of cost or net realizable value. Cost is determined using a weighted average cost method for raw materials
(including scrap, purchased steel substrate and aluminum slabs) and supplies, and on a first-in, first-out basis for other inventory. Inventory
consisted of the following at December 31 (in thousands):
2025 	2024
Raw materials 	$ 	1,741,873 	$ 	1,323,920
Supplies 	815,895 	805,035
Work in progress 	414,492 	269,031
Finished goods 	766,256 	715,747
Total inventories 	$ 	3,738,516 	$ 	3,113,733

-- 65 of 100 --

Table of Contents
64
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
Property, Plant and Equipment
Property, plant and equipment are stated at cost which includes capitalized interest on construction in progress amounts, and is reduced
by proceeds received from certain state and local government grants and other capital cost reimbursements, except for assets acquired in
acquisitions which are valued at fair value at the purchase date. The company assigns each fixed asset a useful life ranging from 3 to 15 years
for plant, machinery and equipment, and 5 to 40 years for buildings and improvements. Repairs and maintenance are expensed as incurred.
Depreciation is provided utilizing the straight-line depreciation methodology, or the units-of-production depreciation methodology for certain
production-related steel and aluminum operations segment assets, based on units produced, subject to minimum and maximum levels.
Depreciation expense was $515.0 million, $441.2 million, and $397.0 million for the years ended December 31, 2025, 2024, and 2023, respectively.
The company’s property, plant and equipment consisted of the following at December 31 (in thousands):
2025 	2024
Land and improvements 	$ 	849,391 	$ 	801,210
Buildings and improvements 	1,907,029 	1,487,742
Plant, machinery and equipment 	9,193,744 	7,666,513
Construction in progress 	1,667,367 	2,767,013
13,617,531 	12,722,478
Less accumulated depreciation 	5,048,065 	4,604,490
Property, plant and equipment, net 	$ 	8,569,466 	$ 	8,117,988
Intangible Assets
The company’s intangible assets consisted of the following at December 31 (in thousands):
Weighted
Average
Useful 	Amortization
2025 	2024 	Life 	Period
Customer, vendor and scrap generator relationships 	$ 	539,505 $ 	444,812 	8 to 25 years 	23 years
Trade names 	183,579 	147,950 	15 to 25 years 	21 years
723,084 	592,762 	22 years
Less accumulated amortization 	391,794 	365,528
$ 	331,290 $ 	227,234
The company utilizes an accelerated amortization methodology for customer, vendor and scrap generator relationships in order to follow
the pattern in which the economic benefits of the amounts are anticipated to be consumed. Trade names are amortized using a straight-line
methodology. Amortization of intangible assets was $27.9 million, $30.5 million, and $34.0 million for the years ended December 31, 2025, 2024,
and 2023, respectively.
s

-- 66 of 100 --

Table of Contents
65
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
Estimated amortization expense related to amortizable intangibles for the years ending December 31 is as follows (in thousands):
2026 	$ 	30,840
2027 	28,441
2028 	27,231
2029 	24,861
2030 	23,168
Thereafter 	196,749
Total 	$ 	331,290
Impairment of Long-Lived Tangible and Definite-Lived Intangible Assets
The company reviews long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of
such assets may not be fully recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of
impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets’ carrying amounts.
The impairment loss is measured by comparing the fair value of the assets to its carrying amount. The company considers various factors and
determines whether an impairment test is necessary, including by way of examples, a significant and prolonged deterioration in operating
results and/or projected cash flows, significant changes in the extent or manner in which an asset is used, technological advances with respect
to assets which would potentially render them obsolete, the company’s strategy and capital planning, and the economic environment in
markets to be served.
Goodwill
The company’s goodwill consisted of the following at December 31, 2025 and 2024 (in thousands):
Steel Operations Segment 	$ 	272,133
Aluminum Operations Segment 	14,000
Metals Recycling Operations Segment 	189,413
Steel Fabrication Operations Segment 	1,925
$ 	477,471
Impairment of Goodwill
At least once annually (as of October 1), or when indicators of impairment exist, the company performs a goodwill impairment
analysis. Goodwill is allocated to various reporting units, which are generally one level below the company’s operating segments. If the fair
value exceeds the carrying value of the reporting unit, there is no impairment. If the carrying amount exceeds the fair value, the company
recognizes an impairment loss in the amount by which the carrying value of the net assets assigned to the reporting unit exceeds the fair value
of the reporting unit, with the impairment loss not to exceed the amount of goodwill allocated to the reporting unit. The company has the
option to consider qualitative factors to assess if it is more likely than not that the fair value of a reporting unit exceeds its carrying value. If
elected to bypass the qualitative assessment or if indications of a potential impairment exist, the company performs a quantitative test.

-- 67 of 100 --

Table of Contents
66
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
When conducting a qualitative assessment, the company considers the impact of several factors on the company overall and each
reporting unit individually including the timing and results of prior quantitative tests performed, changes in the carrying amount of the
reporting unit, macroeconomic conditions (including changes in interest and
discount rates), industry and market conditions, recent and projected financial performance, the company’s competitive position and other
factors. When conducting a quantitative test, the fair value of the reporting unit is determined by
using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows (income
approach), and for some years by using a market approach based upon an analysis of valuation metrics of comparable peer companies, using
Level 3 fair value inputs as provided for under ASC 820, Fair Value Measurement.
No impairment was identified during the company’s 2025, 2024 or 2023 annual goodwill impairment analysis. During 2025 and 2024,
the company performed a qualitative assessment and performed a quantitative test in 2023.
Equity-Based Compensation
The company has several stock-based employee compensation plans which are more fully described in Note 6. Equity-Based
Incentive Plans. Compensation expense for restricted stock units, deferred stock units, restricted stock, stock appreciation awards, and
performance awards is recorded over the vesting periods using the fair value as determined by the closing market value of the company’s
common stock on the day prior to grant date, and with respect to performance awards, an estimate of probability of award achievement during
the performance period. The company recognizes forfeitures as they occur. Compensation expense for these stock-based employee
compensation plans was $66.8 million, $65.6 million, and $60.1 million for the years ended December 31, 2025, 2024, and 2023, respectively.
Income Taxes
The company accounts for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are
determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted rates expected to be in
effect during the year in which the basis differences reverse.
Earnings Per Share
Basic earnings per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per
share assumes the weighted average dilutive effect of common share equivalents outstanding during the period applied to the company’s
basic earnings per share. Common share equivalents represent potentially dilutive restricted stock units, deferred stock units, restricted stock,
and performance awards, and are excluded from the computation in periods in which they have an anti-dilutive effect. There were 62,000 anti-
dilutive common share equivalents for the three-month period ended March 31, 2025 excluded from common share equivalents for the year
ended December 31, 2025. There were 269,000 anti-dilutive common share equivalents as of and for the year ended December 31, 2024.

-- 68 of 100 --

Table of Contents
67
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
The following table presents a reconciliation of the numerators and the denominators of the company’s basic and diluted earnings per
share computations for the years ended December 31 (in thousands, except per share data):
2025 	2024
Net Income 	Shares 	Per Share 	Net Income 	Shares 	Per Share
(Numerator) 	(Denominator) 	Amount 	(Numerator) 	(Denominator) 	Amount
Basic earnings per share 	$ 	1,185,595 	147,806 $ 	8.02 $ 	1,537,134 	155,420 $ 	9.89
Dilutive common share equivalents 	- 	598 	- 	716
Diluted earnings per share 	$ 	1,185,595 	148,404 $ 	7.99 $ 	1,537,134 	156,136 $ 	9.84
2023
Net Income 	Shares 	Per Share
(Numerator) 	(Denominator) 	Amount
Basic earnings per share 	$ 	2,450,882 	166,552 	$ 	14.72
Dilutive common share equivalents 	- 	879
Diluted earnings per share 	$ 	2,450,882 	167,431 	$ 	14.64
Concentration of Credit Risk
Financial instruments that potentially subject the company to significant concentrations of credit risk principally consist of temporary
cash investments and accounts receivable. When advantageous, the company places its temporary cash with high credit quality financial
institutions and companies and limits the amount of credit exposure from any one entity. The company is exposed to credit risk in the event of
nonpayment by customers. The company mitigates its exposure to credit risk, which it generally extends initially on an unsecured basis, by
performing ongoing credit evaluations and taking further action if necessary, such as requiring letters of credit or other security interests to
support the customer receivable.
Derivative Financial Instruments
The company routinely enters into exchange traded futures to manage price risk associated with nonferrous metal inventory, as well as
purchases and sales of nonferrous (primarily aluminum and copper) and ferrous metals, to reduce exposure to commodity related price
fluctuations. These exchange traded futures contracts meet the definition of derivative financial instruments. The company does not enter into
these derivative financial instruments for speculative purposes. The company recognizes all derivatives as either assets or liabilities in the
consolidated balance sheets and measures those instruments at fair value. Derivatives that are not designated as cash flow hedges must be
adjusted to fair value through earnings. For the effective fair value hedges, the hedged item is recognized on the balance sheet at fair value.
Changes in the fair value of the hedged balance sheet item are recognized as an offset against the change in fair value of the derivative in cost
of goods sold and included in cash flows from operations. The ineffective portion of a derivative’s change in fair value is immediately
recognized in earnings for fair value hedges. Changes in the fair value of cash flow hedges are recognized in other comprehensive income,
until the hedged item is recognized in earnings.

-- 69 of 100 --

Table of Contents
68
Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)
The company offsets fair value amounts recognized for derivative instruments executed with the same counterparty under master netting
agreements. The fair value of the company’s derivative instruments and required margin deposit totaled $56.2 million and $26.0 million at
December 31, 2025 and 2024, respectively, including required margin deposits of $112.2 million and $12.7 million at December 31, 2025 and 2024,
respectively, which are reflected in other current assets in the consolidated balance sheets. The fair value of the derivative instruments is
disclosed in Note 7. Fair Value Measurements. Total gains and losses related to derivatives in fair value hedging relationships, as well as
those not designated as hedging instruments, are recognized in costs of goods sold. The company recognized losses of $76.7 million and
gains of $11.4 million and $10.0 million for the years ended December 31, 2025, 2024, and 2023, respectively. Derivatives accounted for as cash
flow hedges, for which gains and losses are recognized in other comprehensive income, along with net amounts reclassified from accumulated
other comprehensive income, were insignificant for the years ended December 31, 2025, 2024, and 2023.
Recently Adopted Accounting Pronouncements
In December 2023, the FASB issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures, which modifies
the rules on income tax disclosures to require entities to disclose specific categories in the rate reconciliation, the income or loss from
continuing operations before income tax expense or benefit (separated between domestic and foreign) and income tax expense or benefit from
continuing operations (separated by federal, state and foreign). The company adopted ASU 2023-09 during the year ended December 31, 2025.
See Note 4. Income Taxes.
Recently Issued Not Yet Adopted Accounting Pronouncements
In November 2024, the FASB issued ASU 2024-03, Income Statement Reporting Comprehensive Income-Expense Disaggregation
Disclosures (Subtopic 220-40): Disaggregation of Income Statement Expenses, requiring public entitles to disclose additional information
about specific expense categories in the notes to the financial statements on an interim and annual basis. ASU 2024-03 is effective for fiscal
years beginning after December 15, 2026, and for interim periods beginning after December 15, 2027, with early adoption permitted. The
Company is currently evaluating the impact of adopting ASU 2024-03.
Note 2. Business Combinations
United Steel Supply
As of December 31, 2024, the company had a 90% controlling interest in United Steel Supply, LLC. On April 1, 2025, a noncontrolling
member of USS exercised its option to require SDI to purchase its 5% equity interest, increasing SDI’s ownership to 95%. The remaining
noncontrolling member has the option to require SDI to purchase, and SDI has the option to acquire, the outstanding 5% equity interest of
USS. Redeemable noncontrolling interests related to USS are $30.0 million and $60.0 million at December 31, 2025, and 2024, respectively.
New Process Steel, L.P.
On December 1, 2025, the company acquired the remaining 55% equity interest in New Process Steel, L.P., increasing its ownership from
45% to 100% and obtaining control. NPS is a metals solutions and distribution supply-chain management company headquartered in Houston,
Texas, with a focus toward growing its value-added manufacturing applications. The acquisition of NPS expands the company’s exposure to
value-added manufacturing opportunities. Prior to the 2025 acquisition date, the company accounted for its 45% minority equity interest in
NPS as an equity-method investment. Upon the acquisition of the remaining interest, the previously held equity interest was remeasured to an
acquisition-date fair value of $220.4 million, based on the purchase price of the remaining 55% interest. The company recognized a gain of $6.5
million as a result of remeasuring its prior equity interest in NPS before the business combination, included in other (income) expense, net in
the consolidated statements of income for the year ended December 31, 2025.

-- 70 of 100 --

Table of Contents
69
Note 2. Business Combinations (Continued)
The total purchase consideration consisted of the fair value of the previously held equity interest and the consideration transferred to
acquire the remaining ownership interest. Operating results of NPS from and after December 1, 2025, have been included in the company’s
consolidated financial statements within the steel operations segment. The acquisition-date fair value of the consideration transferred totaled
$449.3 million, which consisted of the following (in thousands):
Cash paid for remaining 55% interest 	$ 	228,935
Fair value of previously held equity interest 	220,366
Total consideration 	$ 	449,301
The aggregate purchase price was preliminarily allocated to the identified assets acquired and liabilities assumed of NPS at December 1,
2025, based on their estimated acquisition date fair values (in thousands):
Cash 	$ 	53,161
Accounts receivable 	106,021
Inventory 	205,955
Property, plant & equipment 	45,752
Other assets 	59,030
Identifiable intangible assets 	131,960
Total identifiable assets acquired 	601,879
Accounts payable 	63,963
Other liabilities 	88,615
Total liabilities assumed 	152,578
Total consideration 	$ 	449,301
The company is in the process of obtaining third-party valuations of property, plant, and equipment and certain intangible assets.
Accordingly, the provisional amounts included above are subject to change during the measurement period. The identifiable intangible assets
acquired include customer relationships of $96.3 million and trade names of $35.6 million. The company estimated the provisional amount for
the trade name based on a relief from royalty method under the income approach and estimated the provisional amount for the customer
relationships based on a multi-period excess earnings method, which is a specific discounted cash flow method under the income approach.
The company utilizes an accelerated amortization methodology to follow the pattern in which the economic benefits of the customer
relationship intangible asset are anticipated to be consumed over its 25 year assigned life. The company amortized the intangible asset related
to the trade name using a straight-line methodology over its 25 year assigned life.
New Process Steel Unaudited Pro Forma Results
NPS’s operating results have been reflected in the company’s financial statements since the effective date of the acquisition, December 1,
2025. The following unaudited pro forma information is presented below as if the NPS acquisition was completed as of January 1, 2024 (in
thousands):
Years Ended December 31,
2025 	2024
Net sales 	$ 	18,647,759 	$ 	18,067,014
Net income attributable to Steel Dynamics, Inc. 	1,189,831 	1,542,398
The information presented is for informational purposes only and is not necessarily indicative of the actual results that would have
occurred had the acquisition been consummated at the beginning of the respective period, nor are they necessarily indicative of future
operating results of the combined companies under the ownership and management of the company. The amounts have been calculated after
applying the company’s accounting policies and adjusting the results of NPS to reflect the additional depreciation and amortization that would
have been charged assuming the fair

-- 71 of 100 --

Table of Contents
70
value adjustments to property, plant, and equipment and intangible assets had been applied on January 1, 2024, together with the
consequential tax effects.
Note 3. Long-Term Debt
The company’s borrowings consisted of the following at December 31 (in thousands):
2025 	2024
2.400% senior notes due 2025 	- 	400,000
5.000% senior notes due 2026 	- 	400,000
1.650% senior notes due 2027 	350,000 	350,000
4.000% senior notes due 2028 	650,000 	-
3.450% senior notes due 2030 	600,000 	600,000
3.250% senior notes due 2031 	500,000 	500,000
5.375% senior notes due 2034 	600,000 	600,000
5.250% senior notes due 2035 	750,000 	-
3.250% senior notes due 2050 	400,000 	400,000
5.750% senior notes due 2055 	400,000 	-
Other obligations 	36,610 	28,803
Total debt 	4,286,610 	3,278,803
Less debt issuance costs and original issue discounts 	75,447 	47,796
Total amounts outstanding 	4,211,163 	3,231,007
Less current maturities 	34,655 	426,990
Long-term debt 	$ 	4,176,508 	$ 	2,804,017
Financing Activity
In March 2025, the company issued $600.0 million of 5.250% notes due 2035 and $400.0 million of 5.750% notes due 2055. Proceeds from
these notes were used for repayment of the company’s $400.0 million of 2.400% notes due 2025 and for other general corporate purposes.
In November 2025, the company issued $650.0 million of 4.000% notes due 2028 and an additional $150.0 million of 5.250% notes due
2035. Proceeds from these notes were used to redeem the company’s $400.0 million of 5.000% notes due 2026 and for other general corporate
purposes.
Senior Credit Facility, due 2028
On July 19, 2023, the company entered into an unsecured credit agreement comprised of a senior unsecured credit facility (Facility), which
provides a $1.2 billion unsecured Revolver, maturing July 2028. Subject to certain conditions, the company has the opportunity to increase the
Facility size by $500.0 million. The unsecured Facility is available to fund working capital, capital expenditures, and other general corporate
purposes. The Facility contains financial covenants and other covenants pertaining to the company’s ability to incur indebtedness and permit
liens on certain assets. The company’s ability to borrow funds within the terms of the unsecured Facility is dependent upon its continued
compliance with financial and other covenants. At December 31, 2025, the company had $1.2 billion of availability on the Facility, $9.2 million
of outstanding letters of credit and other obligations which reduce availability, and there were no borrowings outstanding.
The Facility pricing grid is adjusted quarterly and is based on either the company’s leverage of net debt (as defined in the Facility) to last-
twelve-months (LTM) consolidated EBITDA as defined in the Facility (earnings before interest, taxes, depreciation, amortization, and certain
other non-cash items as allowed in the Facility), or the company’s credit ratings. The minimum pricing is adjusted Secured Overnight
Financing Rate (SOFR) plus 1.000% and the maximum pricing is adjusted SOFR plus 1.75%. In addition, the company is subject to an unused
commitment fee of between 0.11% and 0.275% (based on either the leverage of net debt to LTM consolidated EBITDA, or the company’s
credit ratings) which is applied to the unused portion of the Facility.

-- 72 of 100 --

Table of Contents
71
Note 3. Long-Term Debt (Continued)
The financial covenants under the Facility state that the company must maintain an interest coverage ratio of not less than 2.50:1.00. The
company’s interest coverage ratio is calculated by dividing its LTM consolidated EBITDA by its LTM gross interest expense, less
amortization of financing fees. In addition, a debt to capitalization ratio of not more than 0.60:1.00 must be maintained. At December 31, 2025,
the company’s interest coverage ratio and debt to capitalization ratio were 13.33:1.00 and 0.32:1.00, respectively. The company was, therefore,
in compliance with these covenants at December 31, 2025, and anticipates remaining in compliance during the next twelve months.
Senior Unsecured Notes
The company has eight different tranches of senior unsecured notes (Notes) outstanding. These Notes are in equal right of payment with
all existing and future senior unsecured indebtedness and are senior in right of payment to all subordinated indebtedness. These
Notes contain provisions that allow the company to redeem the Notes on or after the dates and at redemption prices (expressed as
a percentage of principal amount) listed below.
The company’s $350.0 million of 1.650% senior notes due 2027 mature on October 15, 2027, with interest payable semi-annually. Early
redemption is permitted any time prior to August 15, 2027, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.20%; and as of August 15, 2027, at 100.000%.
The company’s $650.0 million of 4.000% senior notes due 2028 mature on December 15, 2028, with interest payable semi-annually. Early
redemption is permitted any time prior to November 15, 2028, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.10%; and as of November 15, 2028, at 100.000%.
The company’s $600.0 million of 3.450% senior notes due 2030 mature on April 15, 2030, with interest payable semi-annually. Early
redemption is permitted any time prior to January 15, 2030, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.25%; and as of January 15, 2030, at 100.000%.
The company’s $500.0 million of 3.250% senior notes due 2031 mature on January 15, 2031, with interest payable semi-annually. Early
redemption is permitted any time prior to October 15, 2030, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.40%; and as of October 15, 2030, at 100.000%.
The company’s $600.0 million of 5.375% senior notes due 2034 mature on August 15, 2034, with interest payable semi-annually. Early
redemption is permitted any time prior to May 15, 2034, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.20%; and as of May 15, 2034, at 100.000%.
The company’s $750.0 million of 5.250% senior notes due 2035 mature on May 15, 2035, with interest payable semi-annually. Early
redemption is permitted any time prior to February 15, 2035, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.20%; and as of February 15, 2035, at 100.000%.
The company’s $400.0 million of 3.250% senior notes due 2050 mature on October 15, 2050, with interest payable semi-annually. Early
redemption is permitted any time prior to April 15, 2050, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.30%; and as of April 15, 2050, at 100.000%.

-- 73 of 100 --

Table of Contents
72
Note 3. Long-Term Debt (Continued)
The company’s $400.0 million of 5.750% senior notes due 2055 mature on May 15, 2055, with interest payable semi-annually. Early
redemption is permitted any time prior to November 15, 2054, at the greater of par or a make-whole price of the remaining payments to be made
discounted at the applicable U.S. Treasury rate plus 0.25%; and as of November 15, 2054, at 100.000%.
Other Obligations
Secured Loans. Two of the company’s controlled subsidiaries have entered into financing agreements for certain equipment which bear a
weighted average interest rate of 5.15%, with monthly principal and interest payments required through 2033. The outstanding principal
balance of these agreements was $3.4 million and $2.4 million at December 31, 2025, and 2024, respectively.
One of the company’s controlled subsidiaries has a secured credit agreement, which matures in March 2026, and provides a revolving
variable rate credit facility of up to $30.0 million, subject to a borrowing base determined from eligible accounts receivable and inventory.
Interest, which was 5.12% at December 31, 2025, is payable monthly. There were no amounts due under the credit facility at December 31, 2025
or 2024.
Another of the company’s controlled subsidiaries has a secured credit agreement, which matures in June 2028, and provides a revolving
variable rate credit facility of up to $125.0 million, subject to a borrowing base determined from eligible accounts receivable and inventory.
Interest, which was 5.47% at December 31, 2025, is payable monthly. Amounts due under the credit facility were $33.2 million and $26.4 million
at December 31, 2025, and 2024, respectively.
Outstanding Debt Maturities
Maturities of outstanding debt as of December 31, 2025, are as follows (in thousands):
2026 	$ 	34,655
2027 	351,099
2028 	650,416
2029 	198
2030 	600,095
Thereafter 	2,650,147
$ 	4,286,610
The company capitalizes interest on all qualifying construction in progress assets. For the years ended December 31, 2025, 2024, and 2023,
total interest costs incurred were $170.6 million, $123.1 million, and $109.5 million, respectively, of which $100.6 million, $66.8 million, and $33.0
million, respectively, were capitalized.

-- 74 of 100 --

Table of Contents
73
Note 4. Income Taxes
Components of earnings before income taxes and noncontrolling interests for the years ended December 31 are as follows (in thousands):
2025 	2024 	2023
United States income 	$ 	1,489,479 	$ 	1,992,814 	$ 	3,198,048
Foreign income (loss) 	3,492 	(9,933) 	20,895
Total income before income taxes 	$ 	1,492,971 	$ 	1,982,881 	$ 	3,218,943
The company files a consolidated federal income tax return. The provision for income tax expense for the years ended December 31 is as
follows (in thousands):
2025 	2024 	2023
Current income tax expense
Federal 	$ 	172,988 	$ 	409,586 	$ 	600,499
State 	32,559 	57,942 	91,965
Foreign 	4,850 	7,980 	3,482
Total current 	210,397 	475,508 	695,946
Deferred income tax expense (benefit)
Federal 	96,693 	(26,311) 	38,172
State 	7,322 	(12,476) 	15,355
Foreign 	(8,752) 	(3,796) 	2,138
Total deferred 	95,263 	(42,583) 	55,665
Total income tax expense 	$ 	305,660 	$ 	432,925 	$ 	751,611
A reconciliation of the statutory rates to the actual effective tax rates for the years ended December 31 are as follows (in thousands,
except percentages):
2025 	2024 	2023
U.S. Federal Statutory Tax Rate 	$ 	313,524 	21.0 % 	$ 	416,405 	21.0 % 	$ 	675,978 	21.0 %
State and local income taxes, net of federal
income tax effect(a) 	31,505 	2.1 	35,918 	1.8 	84,784 	2.6
Foreign tax effects 	(4,635) 	(0.3) 	6,270 	0.3 	1,232 	0.1
Effect of cross-border tax laws 	(2,388) 	(0.2) 	(5,411) 	(0.3) 	(2,445) 	(0.1)
Tax credits - federal research & development 	(35,050) 	(2.3) 	(18,036) 	(0.9) 	(11,329) 	(0.4)
Nontaxable or nondeductible items 	2,240 	0.2 	(1,557) 	(0.1) 	(784) 	-
Changes in unrecognized tax expense (benefits) 	464 	- 	(664) 	- 	4,175 	0.1
Effective tax rate 	$ 	305,660 	20.5 % 	$ 	432,925 	21.8 % 	$ 	751,611 	23.3 %
(a) State taxes in Indiana, Illinois, Mississippi, and Pennsylvania for 2025, Indiana, Michigan, and California for 2024, and Indiana, Illinois, Mississippi,
Pennsylvania, and Michigan for 2023 made up the majority (greater than 50%) of the tax effect in this category.

-- 75 of 100 --

Table of Contents
74
Note 4. Income Taxes (Continued)
Cash taxes paid, net of refunds, by jurisdiction for the years ended December 31 are as follows (in thousands):
2025 	2024 	2023
U.S. Federal 	$ 	116,060 	$ 	399,306 	$ 	560,000
U.S. State and Local
Indiana 	- 	25,863 	13,897
Other States (combined)(b) 	27,531 	36,672 	64,630
Foreign - Mexico 	8,409 	1,922 	4,140
Total income taxes paid, net 	$ 	152,000 	$ 	463,763 	$ 	642,667
(b) All other U.S. state/local jurisdictions individually represented less than 5% and are aggregated into "Other States"
Significant components of the company’s deferred tax assets and liabilities at December 31 are as follows (in thousands):
2025 	2024
Deferred tax assets
Accrued expenses and allowances 	$ 	55,029 	$ 	41,031
Inventories 	76,218 	6,892
Net operating loss carryforwards 	61,893 	24,381
Amortizable assets 	- 	39,657
Other 	20,500 	5,916
213,640 	117,877
Less: valuation allowance 	(1,360) 	(1,150)
Total net deferred tax assets 	212,280 	116,727
Deferred tax liabilities
Property, plant and equipment 	(1,194,237) 	(1,014,515)
Amortizable assets 	(4,187) 	-
Other 	(11,305) 	(4,398)
Total deferred tax liabilities 	(1,209,729) 	(1,018,913)
Net deferred tax liability 	$ 	(997,449) 	$ 	(902,186)
Certain wholly-owned and controlled subsidiaries of the company file separate federal and state income tax returns. These subsidiaries
generated state net operating loss carryforwards, which will expire in the years 2034 through 2045 if not utilized. Annually, the company
evaluates the realizability of the net deferred tax assets for this controlled subsidiary. In completing this evaluation, the company considers all
available positive and negative evidence in order to determine whether, based on the weight of the evidence, a valuation allowance for its
deferred tax assets is necessary. Such evidence includes current operating results, historical results, future reversals of existing taxable
temporary differences and expectations for future taxable income (exclusive of the reversal of temporary differences and carryforwards), as well
as the implementation of feasible and prudent tax planning strategies. Based on the evidence, the company maintained a valuation allowance
of $1,360,000 and $1,150,000 as of December 31, 2025, and 2024, respectively, with respect to certain state tax credits of the controlled
subsidiary.

-- 76 of 100 --

Table of Contents
75
Note 4. Income Taxes (Continued)
A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):
2025 	2024 	2023
Balance at January 1 	$ 	29,687 	$ 	31,258 	$ 	28,646
Increases related to current year tax positions 	7,245 	5,115 	1,500
Increases related to prior year tax positions 	2,764 	263 	1,798
Decreases related to prior year tax positions 	(399) 	(504) 	-
Decreases related to lapse of applicable statute of
limitations (8,614) 	(6,445) 	(686)
Balance at December 31 	$ 	30,683 	$ 	29,687 	$ 	31,258
Included in the balance of unrecognized tax benefits at December 31, 2025 and 2024 are potential benefits of $27.2 million and $26.4 million,
respectively, that, if recognized, would affect the effective tax rate. The company recognizes interest and penalties related to its tax
contingencies on a net-of-tax basis in income tax expense. During the year ended December 31, 2025, the company recognized income from the
decrease of interest expense and penalties of $340,000, net of tax. During the years ended December 31, 2024 and 2023, the company
recognized expense from the increase of interest expense and penalties of $710,000 and $1,560,000, respectively, net of tax. In addition to the
unrecognized tax benefits in the table above, the company had $3.7 million and $4.2 million accrued for the payment of interest and penalties at
December 31, 2025 and 2024, respectively.
The company files income tax returns in the U.S. federal jurisdiction as well as income tax returns in various state jurisdictions. The
tax years 2022 through 2025 remain open to examination by the Internal Revenue Service and various state and local jurisdictions.
Note 5. Shareholders’ Equity
Cash Dividends
The company declared cash dividends of $294.1 million, or $2.00 per common share, during 2025; $284.1 million, or $1.84 per common
share, during 2024; and $280.5 million, or $1.70 per common share, during 2023. The company paid cash dividends of $291.2 million,
$282.6 million, and $271.3 million during 2025, 2024, and 2023, respectively.
Treasury Stock
In November 2022, the board of directors authorized a share repurchase program of up to $1.5 billion of the company’s common stock.
This program was exhausted in November 2023. In November 2023, the board of directors authorized an additional share repurchase program
of up to $1.5 billion of the company’s common stock. This program was exhausted in March 2025. In February 2025, the board of directors
authorized an additional share repurchase program of up to $1.5 billion of the company’s common stock. Under the share repurchase
programs, purchases take place as and when the company determines in open market or private transactions made based upon the market
price of the company’s common stock, the nature of other investment opportunities or growth projects, the company’s cash flows from
operations, and general economic conditions. The share repurchase programs do not require the company to acquire any specific number of
shares, and may be modified, suspended, extended, or terminated by the company at any time. The share repurchase programs do not have an
expiration date. The company repurchased 6.7 million shares for $900.9 million during 2025, 9.4 million shares for $1.2 billion during 2024, and
13.4 million shares for $1.5 billion during 2023 under the share repurchase programs. At December 31, 2025, the company had remaining
authorization to repurchase $801.0 million of additional shares under the February 2025 share repurchase program.

-- 77 of 100 --

Table of Contents
76
Note 6. Equity-Based Incentive Plans
2023 Equity Incentive Plan
In May 2023, the company’s shareholders approved the 2023 Equity Incentive Plan (2023 Plan), which superseded the prior Amended and
Restated 2015 Equity Incentive Plan. The 2023 Plan is designed to attract, motivate, and retain qualified persons that are able to make
important contributions to the company’s success. To accomplish these objectives, the 2023 Plan provides for awards of equity-based
incentives through granting of restricted stock units (RSUs), deferred stock units (DSUs), stock appreciation rights (SARs), performance
awards, such as the long-term incentive compensation program (LTIP), restricted stock awards (of which none have been granted), stock
options (of which none have been granted), and unrestricted stock awards (of which none have been granted). Under the 2023 Plan, 9.0 million
shares of common stock were reserved for grant through December 31, 2033. The 2023 Plan uses a fungible share concept under which any
awards that are not a full-value award, such as stock options and stock-settled SARs, will be counted against the share reserve as one share
for each share of common stock, and awards that are full-value awards, such as RSUs, DSUs, restricted and unrestricted stock awards, and
performance awards, will be counted against the share reserve as 2.09 shares for each share of common stock. The SARs the company has
granted to date (of which none are outstanding at December 31, 2025) can only be settled in cash, and thus, do not count against the share
reserve. At December 31, 2025, there were 5.1 million shares still available for issuance.
Substantially all of the company’s full-time, non-union, U.S. team members receive RSUs, which are granted annually in November at no
cost to employees and vest 100% over the shorter of two years from grant date or upon the recipient reaching retirement eligible age (59½
years). During 2025, 2024, and 2023, certain key senior leadership of the company received RSUs in February which vest over a period of 2 to 4
years. The RSUs are converted to stock and issued to employees upon vesting. The company satisfies RSUs with newly issued shares, and
satisfies restricted and unrestricted stock awards, DSUs, and performance awards with treasury shares. In addition to the RSUs and LTIP
awards granted during the three-year period ended December 31, 2025, presented below, the company awarded 14,000, 13,000 and 18,000 DSUs
in 2025, 2024 and 2023, respectively.
Restricted Stock Units
A summary of the company’s RSU activity and outstanding RSUs as of December 31, 2025, are presented below (dollars in thousands
except grant date fair value):
Weighted 	Aggregate
Number 	Average Grant 	Intrinsic 	Unrecognized
of RSUs 	Date Fair Value 	Value 	Compensation
Outstanding RSUs as of January 1, 2023 	973,551 	$ 	71.80 	$ 	94,765 	$ 	44,394
Granted 	433,810 	108.95
Vested 	(517,041) 	64.03
Forfeited 	(40,829) 	78.70
As of December 31, 2023 	849,491 	$ 	99.13 	$ 	101,480 	$ 	43,073
Granted 	374,370 	137.14
Vested 	(394,675) 	94.28
Forfeited 	(39,874) 	104.21
As of December 31, 2024 	789,312 	$ 	115.47 	$ 	90,037 	$ 	54,964
Granted 	368,224 	146.64
Vested 	(421,026) 	106.60
Forfeited 	(35,826) 	126.06
As of December 31, 2025 (nonvested) 	700,684 	$ 	136.50 	$ 	118,731 	$ 	56,586

-- 78 of 100 --

Table of Contents
77
Note 6. Equity-Based Incentive Plans (Continued)
The weighted average remaining life before vesting of the outstanding RSUs as of December 31, 2025, is 1.3 years. The fair value of RSUs
vesting during 2025, 2024, and 2023 was $60.7 million, $56.2 million, and $58.3 million, respectively, and were net-share settled such that the
company withheld shares with value equivalent to the employees’ minimum statutory obligation for the applicable income and other
employment taxes and remitted the cash to the appropriate taxing authorities. The total shares withheld in 2025, 2024, and 2023 were
approximately 253,000, 287,000, and 342,000 shares, respectively, and were based on the value of the RSUs on their vesting dates as
determined by the company’s closing stock price.
Long-Term Incentive Compensation Program (LTIP)
The company maintains an LTIP performance-based program directed toward key senior leadership of the company, as determined at the
discretion of the Compensation Committee of the Board of Directors. Awards are in shares of the company’s common stock using the closing
stock price on the first day of the performance period to convert each key senior executive’s predetermined multiple of annual base salary. The
performance period is generally three years; however, transition awards can be issued with a shorter performance period. Performance is
measured in terms of equal portions of four growth and profitability measures, as compared to the same measures, similarly treated, of a pre-
established group of steel sector competitors. Awards earned can range from zero to 100% of the shares awarded, and award shares vest
immediately once earned on the basis of performance.
The Compensation Committee granted the following three-year performance period awards and transition awards, which have been
earned and have or will be issued as follows:
Maximum
Shares That 	Award
Could Be Issued 	Earned 	Award Issued/Issuable
2022 LTIP Award:
Three-year performance period award 	249,759 	249,759 	249,759 March 2025
2023 LTIP Award:
Three-year performance period award 	193,946 	164,857 	164,857 March 2026
Two-year performance period transition award 	5,517 	4,690 	4,690 March 2025
One-year performance period transition award 	3,678 	2,759 	2,759 March 2024
2024 LTIP Award:
Three-year performance period award 	166,791 	* 	*
2025 LTIP Award:
Three-year performance period award 	182,819 	* 	*
* Not yet earned as performance period not complete.
2018 Executive Incentive Compensation Plan (2018 Executive Plan)
The 2018 Executive Plan provides for eligibility of certain senior leadership of the company to receive cash and stock bonuses based on
predetermined formulas. The company’s shareholders approved the 2018 Executive Plan in May 2018 and 2.0 million shares of company stock
were reserved for grant through February 28, 2028. At times a portion of the bonus may be distributed in shares of the company’s stock, of
which one-third of the shares vest immediately and the remaining shares vest in equal annual installments over an additional two-year service-
based vesting period requirement. At December 31, 2025, 2024, and 2023, 1.3 million shares under the 2018 Executive Plan remained available
for grant. Pursuant to the 2018 Executive Plan, 15,000, 17,000, and 29,000 shares were awarded with a market value of $2.7 million, $2.2 million,
and $3.5 million for the 2025, 2024, and 2023 award years, respectively.

-- 79 of 100 --

Table of Contents
78
Note 7. Fair Value Measurements
Accounting standards provide a comprehensive framework for measuring fair value, sets forth a definition of fair value and establishes a
hierarchy prioritizing the inputs to valuation techniques, giving the highest priority to quoted prices in active markets for identical assets and
liabilities and the lowest priority to unobservable value inputs. Levels within the hierarchy are defined as follows:
● Level 1—Unadjusted quoted prices for identical assets and liabilities in active markets;
● Level 2—Quoted prices for similar assets and liabilities in active markets (other than those included in Level 1) which are
observable for the asset or liability, either directly or indirectly; and
● Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are
unobservable.
The following table sets forth financial assets and liabilities measured at fair value on a recurring basis in the consolidated balance sheet
and the respective levels to which the fair value measurements are classified within the fair value hierarchy as of December 31 (in thousands):
Quoted Prices 	Significant
in Active 	Other 	Significant
Markets for 	Observable 	Unobservable
Identical Assets 	Inputs 	Inputs
Total 	(Level 1) 	(Level 2) 	(Level 3)
December 31, 2025
Commodity futures – financial assets 	$ 	8,925 	$ 	- $ 	8,925 	$ 	-
Commodity futures – financial liabilities 	64,896 	- 	64,896 	-
December 31, 2024
Short-term investments 	$ 	147,811 	$ 	- $ 	147,811 	$ 	-
Commodity futures – financial assets 	19,323 	- 	19,323 	-
Commodity futures – financial liabilities 	6,272 	- 	6,272 	-
The carrying amounts of financial instruments including cash equivalents approximate fair value (Level 1). The fair values of short-term
investments commodity futures contracts are estimated by the use of quoted market prices, estimates obtained from brokers, and other
appropriate valuation techniques based on references available (Level 2). The fair value of long-term debt, including current maturities, as
determined by quoted market prices (Level 2), was approximately $4.1 billion and $3.0 billion at December 31, 2025, and 2024, respectively (with
a corresponding carrying amount in the consolidated balance sheet of $4.2 billion and $3.2 billion at December 31, 2025, and 2024,
respectively).
Note 8. Commitments and Contingencies
The company has entered into certain commitments with suppliers which are of a customary nature. Commitments have been entered into
relating to future expected requirements for commodities such as electricity, water, natural gas and its transportation services, fuel, air
products, zinc, and electrodes. Certain commitments contain provisions which require that the company "take or pay” for specified quantities
at fixed prices without regard to actual usage for periods of generally up to 5 years for physical commodity requirements and commodity
transportation requirements, with some extending beyond, and for up to 14 years for air products and 26 years for water products. The
company utilized such "take or pay” requirements during the past three years under these contracts. The company believes that production
requirements will be such that consumption of the products or services purchased under these commitments will occur in the normal
production process.

-- 80 of 100 --

Table of Contents
79
Note 8. Commitments and Contingencies (Continued)
The company’s commitments for these agreements with "take or pay” or other similar commitment provisions for the years ending
December 31 are as follows (in thousands):
2026 	$ 	331,503
2027 	49,643
2028 	38,291
2029 	19,973
2030 	18,853
Thereafter 	160,882
$ 	619,145
At December 31, 2025, the company has outstanding commitments of $335.5 million related to ongoing construction of property, plant,
and equipment, primarily related to the completion of the aluminum flat rolled products mill, as well as other steel operations expansion
projects in 2026. The company’s commitments for operating leases are discussed in Note 11. Leases.
The company is involved in various litigation matters, including administrative and regulatory proceedings, that arise in the ordinary
course of business, none of which are expected to have a material impact on the company’s financial condition, results of operations, or
liquidity.
Note 9. Transactions with Affiliated Companies
The company purchases and sells recycled and scrap metal, steel, and purchases transportation services with other smaller affiliated
companies, including equity method investments. These transactions for the years ended December 31, are as follows (in thousands):
2025 	2024 	2023
Sales 	$ 	621,998 	$ 	720,742 	$ 	680,004
Accounts receivable 	2,411 	54,230 	73,245
Purchases 	163,318 	188,906 	167,798
Accounts payable 	7,582 	7,267 	9,685
Note 10. Retirement Plans
The company sponsors several 401(k) retirement savings and profit sharing plans (Plans) for eligible employees, which are considered
"qualified plans” for federal income tax purposes. The company’s total expense for the Plans was $147.0 million, $209.0 million, and $312.4
million for the years ended December 31, 2025, 2024, and 2023, respectively. Profit sharing expense for eligible employees is 8% of consolidated
pretax income excluding noncontrolling interests and other items. The resulting profit sharing expense under the Plans was $120.0 million,
$165.2 million, and $264.6 million for the years ended December 31, 2025, 2024, and 2023, respectively; of which up to $96.0 million, $132.2
million, and $211.6 million, respectively, was directed by the company’s board of directors to be contributed to the Plans (subject to total Plan
contribution limitations), with the remaining amounts each year paid directly in cash to the Plans’ participants.

-- 81 of 100 --

Table of Contents
80
Note 11. Leases
The company has operating leases relating principally to transportation and other equipment, and some real estate. The company
determines if an arrangement contains a lease at inception, which generally occurs when the arrangement identifies a specific asset that the
company has the right to direct the use of and obtain substantially all of the economic benefit from use of the identified asset. Certain of the
lease agreements contain rent escalation clauses (including fixed and index-based escalations), and options to extend or terminate the lease.
For purposes of calculating operating lease obligations, the company’s lease terms include options to extend the lease when it is reasonably
certain that the company will exercise such option. The company uses its incremental borrowing rate at lease commencement to determine the
present value of lease payments. The incremental borrowing rate is the rate of interest the company could borrow on a collateralized basis over
a similar term with similar payments. Operating lease expense is recognized on a straight-line basis over the lease term.
Operating lease right-of-use assets and lease obligations included in the consolidated balance sheets at
December 31, are as follows (in thousands):
2025 	2024
Right-of-use assets under operating leases:
Other assets - noncurrent 	$ 	170,183 	$ 	113,500
Lease obligations under operating leases:
Accrued liabilities 	$ 	24,159 	$ 	19,915
Other liabilities - noncurrent 	147,495 	94,417
$ 	171,654 	$ 	114,332
The weighted average remaining lease term for our operating leases is nine years as of December 31, 2025 and 2024. The weighted-average
discount rate is 5.00% and 4.46% as of December 31, 2025 and 2024, respectively. Future operating lease liabilities as of December 31, 2025, for
the next five years and thereafter are as follows (in thousands):
2026 	$ 	31,365
2027 	28,882
2028 	25,981
2029 	22,469
2030 	19,621
Thereafter 	83,312
Total undiscounted cash flows 	211,630
Less imputed interest 	(39,976)
Lease obligations under operating leases 	$ 	171,654
Operating lease expense included in the consolidated statements of income was $27.9 million, $27.4 million, and $27.9 million for the years
ended December 31, 2025, 2024, and 2023, respectively. Cash paid related to operating lease obligations was $23.2 million for the years ended
December 31, 2025 and 2024, respectively, and $22.8 million for the year ended December 31, 2023. Variable lease costs were not material for the
years ended December 31, 2025, 2024, and 2023. Short-term lease expense included in the consolidated statements of income was $61.9 million,
$51.3 million, and $40.4 million for the years ended December 31, 2025, 2024, and 2023, respectively. Right-of-use assets obtained in exchange
for new operating lease liabilities for the years ended December 31, 2025, 2024, and 2023 were $77.5 million, (including $44.0 million related to
New Process Steel additions), $12.8 million, and $38.8 million, respectively.

-- 82 of 100 --

Table of Contents
81
Note 12. Segment Information
The company’s chief operating decision maker (CODM), who is the Chief Executive Officer, analyzes the results of the business through
the following reportable segments: steel operations, metals recycling operations, steel fabrication operations, and aluminum operations. The
segment operations are more fully described in Note 1. Description of the Business and Summary of Significant Accounting Policies to the
consolidated financial statements.
The CODM assesses segment performance and allocates resources primarily based on operating income. The CODM uses operating
income to allocate operating and capital resources and assesses performance of each segment by comparing actual operating income results
to historical and previously forecasted financial information. The accounting policies of the reportable segments are consistent with those
described in Note 1 to the consolidated financial statements. Intra-segment sales and any related profits are eliminated in consolidation.
The company’s segment results, including disaggregated revenue by segment to external, external non-United States, and other segment
customers, are as follows (in thousands):
Metals 	Steel
For the year ended 	Steel 	Recycling 	Fabrication 	Aluminum
December 31, 2025 	Operations 	Operations 	Operations 	Operations 	Other (a) 	Eliminations Consolidated
Net sales - disaggregated revenue
External 	$ 12,492,494 $ 1,430,347 $ 1,416,560 $ 	360,550 $ 1,322,330 $ 	- $ 17,022,281
External Non-United States 	529,484 	611,294 	1,329 	544 	11,649 	- 	1,154,300
Intersegment 	390,795 	2,304,433 	776 	112,787 	1,475 	(2,810,266) 	-
Net sales 	13,412,773 	4,346,074 	1,418,665 	473,881 	1,335,454 	(2,810,266) 	18,176,581
Less:
Cost of goods sold 	11,740,371 	4,142,083 	906,556 	497,604 	1,305,229 	(2,807,445) 	15,784,398
Other segment items (b) 	244,858 	106,815 	104,684 	149,247 	312,076 	(1,483) 	916,197
Operating income (loss) 	1,427,544 	97,176 	407,425 	(172,970) 	(281,851) 	(1,338) 	1,475,986
Interest expense, net of capitalized interest 	70,043
Other (income) expense, net 	(87,028)
Income before income taxes 	$ 	1,492,971
Depreciation and amortization 	$ 	400,394 $ 	64,255 $ 	13,150 $ 	19,442 $ 	54,549 $ 	(400) $ 	551,390
Capital expenditures 	317,547 	111,964 	15,098 	593,452 	29,341 	(119,377) 	948,025
Total Assets 	9,233,768 	1,463,184 	666,983 	3,905,799 	4,584,424 (c) 	(3,434,378) 	16,419,780

-- 83 of 100 --

Table of Contents
82
Note 12. Segment Information (Continued)
Metals 	Steel
For the year ended 	Steel 	Recycling 	Fabrication 	Aluminum
December 31, 2024 	Operations 	Operations 	Operations 	Operations 	Other (a) 	Eliminations Consolidated
Net sales - disaggregated revenue
External 	$ 11,311,552 $ 1,311,124 $ 1,761,771 $ 	256,051 $ 1,435,062 $ 	- $ 16,075,560
External Non-United States 	749,932 	694,010 	1,731 	2,496 	16,661 	- 	1,464,830
Intersegment 	465,582 	2,131,779 	8,293 	60,142 	- 	(2,665,796) 	-
Net sales 	12,527,066 	4,136,913 	1,771,795 	318,689 	1,451,723 	(2,665,796) 	17,540,390
Less:
Cost of goods sold 	10,736,557 	3,946,457 	1,006,211 	298,572 	1,420,978 	(2,670,971) 	14,737,804
Other segment items (b) 	208,135 	113,649 	98,600 	92,448 	348,153 	(1,436) 	859,549
Operating income (loss) 	1,582,374 	76,807 	666,984 	(72,331) 	(317,408) 	6,611 	1,943,037
Interest expense, net of capitalized interest 	56,347
Other (income) expense, net 	(96,191)
Income before income taxes 	$ 	1,982,881
Depreciation and amortization 	$ 	351,558 $ 	56,148 $ 	11,071 $ 	6,786 $ 	53,344 $ 	- $ 	478,907
Capital expenditures 	461,524 	83,020 	29,374 	1,309,027 	55,183 	(70,122) 	1,868,006
Total Assets 	8,776,445 	1,301,234 	665,867 	2,802,647 	3,319,917 (c) 	(1,930,877) 	14,935,233
Metals 	Steel
For the year ended 	Steel 	Recycling 	Fabrication 	Aluminum
December 31, 2023 	Operations 	Operations 	Operations 	Operations 	Other (a) 	Eliminations Consolidated
Net sales - disaggregated revenue
External 	$ 11,603,139 $ 1,162,246 $ 2,798,262 $ 	239,095 $ 1,164,942 $ 	- $ 16,967,684
External Non-United States 	1,037,412 	774,211 	672 	9,105 	6,232 	- 	1,827,632
Intersegment 	427,071 	2,222,131 	7,843 	37,707 	727 	(2,695,479) 	-
Net sales 	13,067,622 	4,158,588 	2,806,777 	285,907 	1,171,901 	(2,695,479) 	18,795,316
Less:
Cost of goods sold 	10,977,249 	3,971,743 	1,115,515 	237,759 	1,147,441 	(2,700,274) 	14,749,433
Other segment items (b) 	208,773 	139,110 	98,001 	31,002 	419,037 	(1,221) 	894,702
Operating income (loss) 	1,881,600 	47,735 	1,593,261 	17,146 	(394,577) 	6,016 	3,151,181
Interest expense, net of capitalized interest 	76,484
Other (income) expense, net 	(144,246)
Income before income taxes 	$ 	3,218,943
Depreciation and amortization 	$ 	331,225 $ 	65,803 $ 	9,787 $ 	4,917 $ 	26,072 $ 	- $ 	437,804
Capital expenditures 	453,955 	185,903 	22,044 	967,739 	28,264 	- 	1,657,905
(a) Amounts included in Other are from subsidiary operations that are below the quantitative thresholds required for reportable segments and primarily consist
of a joint venture and the idled Minnesota ironmaking operations. Also included are certain unallocated corporate accounts, such as the company's senior unsecured
credit facility, senior notes, certain other investments, amortization of intangible assets and certain profit sharing expenses.
(b) Other segment items for each reportable operating segment include selling, general, and administrative expenses including payroll & benefit expenses and
professional service expenses. Other segment items within Other include selling, general, and administrative expenses such as payroll & benefit expenses,
companywide equity-based compensation expenses, and professional service expenses, as well as company-wide profit sharing expense and amortization of
intangible assets.
(c) Asset amounts included in Other consist of assets held by subsidiary operations that are below the quantitative thresholds required for reportable segments
and the company's corporate assets. Corporate assets primarily consist of cash, short-term and other investments, and intra-company debt.

-- 84 of 100 --

Table of Contents
83
ITEM 9. 	CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A. 	CONTROLS AND PROCEDURES
(a) Evaluation of Disclosure Controls and Procedures.
As required, we carried out an evaluation, under the supervision and with the participation of our principal executive officer and
principal financial officer, of the effectiveness of our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-
15(e) under the Securities Exchange Act of 1934, as amended (the Exchange Act). Based on this evaluation, our principal executive officer
and principal financial officer concluded that, as of December 31, 2025, the end of the period covered by this annual report, our disclosure
controls and procedures were designed to provide and were effective to provide reasonable assurance that the information required to be
disclosed by us in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time
periods specified in the applicable rules and forms, and that it is accumulated and communicated to our management, including our
principal executive and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.
Management’s report on our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange
Act) and the independent registered public accounting firm’s related audit report are included in Item 8. Consolidated Financial
Statements and Supplementary Data of this Form 10-K and are incorporated herein by reference.
(b) Changes in Internal Control Over Financial Reporting
No changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act)
occurred during the fiscal quarter ended December 31, 2025, that has materially affected, or is reasonably likely to materially affect, our
internal control over financial reporting.
Our Management’s Report on Internal Control Over Financial Reporting, as of December 31, 2025, can be found on page 51 of this Form
10-K, and the related Report of Independent Registered Public Accounting Firm, Ernst & Young LLP, can be found on page 52 of this Form 10-
K, each of which is incorporated by reference into this Item 9A.
ITEM 9B. 	OTHER INFORMATION
During the three-month period ended December 31, 2025, none of the Company’s directors or executive officers adopted,
modified or terminated a "Rule 10b5-1 trading arrangement” or a "non-Rule 10b5-1 trading arrangement” as such terms are defined under Item
408 of Regulation S-K.
ITEM 9C. 	DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS
Not applicable.

-- 85 of 100 --

Table of Contents
84
PART III
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERANCE
The information required to be furnished pursuant to Item 10 with respect to directors, executive officers, code of ethics, insider trading
policies, and audit committee financial experts is incorporated herein by reference from the section entitled "Governance of the Company” and
"Proposal No. 1 – Election of Directors” in our Proxy Statement for the 2026 Annual Meeting of Shareholders, which we will file with the
Securities and Exchange Commission no later than 120 days after the end of our fiscal year.
ITEM 11. EXECUTIVE COMPENSATION
The information required to be furnished pursuant to Item 11 with respect to executive compensation is incorporated herein by reference
from the section entitled "Executive Compensation and Related Information” in our Proxy Statement for the 2026 Annual Meeting of
Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our fiscal year.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER
MATTERS
The information relating to security ownership of certain beneficial owners and management required by Item 12 is incorporated herein by
reference from the section entitled "Security Ownership of Directors and Executive Officers” and "Security Ownership of Certain Beneficial
Owners” in our Proxy Statement for the 2026 Annual Meeting of Shareholders, which we will file with the Securities and Exchange Commission
no later than 120 days after the end of our fiscal year. The Equity Compensation Plan Information required by Item 12 is set forth in the table
below.
Equity Compensation Plan Information
Our shareholders approved the Steel Dynamics, Inc. 2018 Executive Incentive Compensation Plan at our annual meeting of shareholders
held May 17, 2018 (2018 Plan). Our shareholders approved the Steel Dynamics, Inc. 2023 Equity Incentive Plan at our annual meeting of
shareholders held May 11, 2023 (2023 Plan). Our shareholders approved the Steel Dynamics, Inc. 2024 Employee Stock Purchase Plan at our
annual meeting of shareholders held May 9, 2024 (2024 Plan). The following table summarizes information about our equity compensation
plans at December 31, 2025, all of which have been approved by shareholders. We do not have any equity compensation plans that have not
been approved by shareholders.
(a) 	(b) 	(c)
Number of securities
remaining available for
Number of securities to be 	future issuance under equity
issued upon exercise of 	Weighted-average 	compensation
outstanding options, 	exercise price of outstanding 	plans (excluding securities
Plan Category 	warrants and rights 	options, warrants and rights(1) 	reflected in column (a))
Equity compensation plans approved by security
holders:
2018 Plan 	36,266 	— 	1,301,887
2023 Plan(1) 	883,464 	— 	5,116,225
2024 Plan(2) 	— 	— 	—
Equity compensation plans not approved by security
holders 	N/A 	N/A 	N/A
Total 	919,730 	— 	6,418,112
(1) Includes 700,684 RSUs and 182,780 DSUs issuable upon expiration of the vesting or deferral periods, which have no exercise price.
(2) Shares are purchased on the open market and no shares are reserved.

-- 86 of 100 --

Table of Contents
85
ITEM 13. 	CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required to be furnished pursuant to Item 13 with respect to certain relationships and related transactions is incorporated
herein by reference from the sections entitled "Governance of the Company – Statement of Policy for the Review, Approval or Ratification of
Transactions with Related Persons,” and "Governance of the Company – Director Independence” in our Proxy Statement for the 2026 Annual
Meeting of Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our
fiscal year; and from Note 9. Transactions with Affiliated Companies to our consolidated financial statements as of December 31, 2025, and
2024, and each of the three years in the periods ended December 31, 2025, 2024, and 2023, included in Item 8. Consolidated Financial
Statements and Supplementary Data of this Form 10-K Annual Report for the fiscal year ended December 31, 2025.
ITEM 14. 	PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information required to be furnished pursuant to Item 14 with respect to principal accountant fees and services is incorporated herein
by reference from the sections entitled "Proposal No. 2 – Ratification of the Appointment of Independent Registered Public Accounting Firm
as Auditors – Audit and Non-Audit Fees” and "Proposal No. 2 – Ratification of the Appointment of Independent Registered Public
Accounting Firm as Auditors – Policy on Audit Committee Pre-Approval of Audit and Permissible Non-Audit Services of Independent
Registered Public Accounting Firm” in our Proxy Statement for the 2026 Annual Meeting of Shareholders, which we will file with the Securities
and Exchange Commission no later than 120 days after the end of our fiscal year.

-- 87 of 100 --

Table of Contents
86
PART IV
ITEM 15. 	EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) 	The following documents are filed as a part of this report:
1. 	Financial Statements: See the Audited Consolidated Financial Statements of Steel Dynamics, Inc. included as part of Item 8.
Consolidated Financial Statements and Supplementary Data and described in the Index on page 50 of this Report.
2. 	Financial Statement Schedules: All schedules for which provision is made in the applicable regulations of the Securities and
Exchange Commission are not required under the related instructions or are inapplicable and therefore have been omitted.
(b) 	Exhibits:
Reference is made to the Exhibit Index preceding the signature pages hereto, which Exhibit Index is hereby incorporated into this item.
ITEM 16. 	FORM 10-K SUMMARY
None.

-- 88 of 100 --

Table of Contents
87
EXHIBIT INDEX
Articles of Incorporation
3.1 	Amended and Restated Articles of Incorporation of Steel Dynamics, Inc., reflecting all amendments thereto through May 11,
2023, incorporated herein by reference from Exhibit 3.1 to our Form 10-Q filed August 8, 2023 (File No.: 000-21719).
3.2 	Amended and Restated Bylaws of Steel Dynamics, Inc., reflecting all amendments thereto through January 31, 2024,
incorporated herein by reference from Exhibit 3.2 to our Form 10-K filed February 29, 2024 (File No.: 000-21719).
Instruments Defining the Rights of Security Holders, Including Indentures
4.1 	Description of Common Stock, incorporated herein by reference from Exhibit 4.1 to our Form 10-K filed February 27, 2020
(File No.: 000-21719).
4.31 	Indenture dated December 4, 2019, among Steel Dynamics, Inc., as Issuer, and Wells Fargo Bank, National Association, as
Trustee, incorporated herein by reference from Exhibit 4.1 to our Registration Statement on Form S-3 filed December 4, 2019
(File No.: 333-235343).
4.32 	First Supplemental Indenture, dated as of December 11, 2019, relating to our issuance of $600 million 3.450% Notes due 2030
among Steel Dynamics, Inc., as Issuer, and Wells Fargo Bank, National Association, as Trustee, incorporated herein by
reference from Exhibit 4.2 to our Form 8-K filed December 11, 2019 (File No.: 000-21719).
4.34 	Form of 3.450% Notes due 2030 (included in Exhibit 4.32), incorporated herein by reference from Exhibit 4.4 to our Form 8-K
filed December 11, 2019 (File No.: 000-21719).
4.35 	Second Supplemental Indenture, dated as of June 5, 2020, relating to our issuance of $500 million 3.250% Notes due 2031,
between Steel Dynamics, Inc. and Wells Fargo Bank, National Association, as Trustee, incorporated herein by reference
from Exhibit 4.2 to our Form 8-K filed June 5, 2020 (File No.: 000-21719).
4.37 	Form of 3.250% Notes due 2031 (included in Exhibit 4.35), incorporated herein by reference from Exhibit 4.4 to our Form 8-K
filed June 5, 2020 (File No.: 000-21719).
4.38 	Third Supplemental Indenture, dated as of October 9, 2020, relating to our issuance of $350 million 1.650% Notes due 2027
and $400 million 3.250% Notes due 2050, between Steel Dynamics, Inc. and Wells Fargo Bank, National Association, as
Trustee, incorporated herein by reference from Exhibit 4.2 to our Form 8-K filed October 9, 2020 (File No.: 000-21719).
4.39 	Form of 1.650% Notes due 2027 (included in Exhibit 4.38), incorporated herein by reference from Exhibit 4.3 to our Form 8-K
filed October 9, 2020 (File No.: 000-21719).
4.40 	Form of 3.250% Notes due 2050 (included in Exhibit 4.38), incorporated herein by reference from Exhibit 4.4 to our Form 8-K
filed October 9, 2020 (File No.: 000-21719).
4.41 	Indenture, dated as of December 7, 2022, between Steel Dynamics, Inc., as Issuer, and U.S. Bank Trust Company, National
Association, as Trustee, incorporated herein by reference from Exhibit 4.1 to our Registration Statement on Form S-3 filed
December 7, 2022 (File No.: 333-268703).

-- 89 of 100 --

Table of Contents
88
4.42 	First Supplemental Indenture, dated as of July 3, 2024, relating to our issuance of $600 million 5.375% Notes due 2034,
between Steel Dynamics, Inc. and U.S. Bank Trust Company, National Association, as Trustee, incorporated herein by
reference from Exhibit 4.2 to our Form 8-K filed July 5, 2024 (File No. 000-21719).
4.43 	Form of 5.375% Notes due 2034 (included in Exhibit 4.42), incorporated herein by reference from Exhibit 4.3 to our Form 8-K
filed July 5, 2024 (File No.: 000-21719).
4.44 	Second Supplemental Indenture, dated as of March 12, 2025, relating to our issuance of $750 million 5.250% Notes due 2035
and $400 million 5.750% Notes due 2055, between Steel Dynamics, Inc. and U.S. Bank Trust Company, National Association,
as Trustee, incorporated herein by reference from Exhibit 4.2 to our Form 8-K filed March 12, 2025 (File No.: 000-21719).
4.45 	Form of 5.250% Notes due 2035 (included in Exhibit 4.44), incorporated herein by reference from Exhibit 4.3 to our Form 8-K
filed March 12, 2025 (File No.: 000-21719).
4.46 	Form of 5.750% Notes due 2055 (included in Exhibit 4.44), incorporated herein by reference from Exhibit 4.4 to our Form 8-K
filed March 12, 2025 (File No.: 000-21719).
4.47 	Third Supplemental Indenture, dated as of November 21, 2025, related to our issuance of $650 million 4.000% Notes due
2028, between Steel Dynamics, Inc. and U.S. Bank Trust Company, National Association, as Trustee, incorporated herein by
reference from Exhibit 4.3 to our Form 8-K filed November 21, 2025 (File No.: 000-21719).
4.48 	Form of 4.000% Notes due 2028 (included in Exhibit 4.47), incorporated herein by reference from Exhibit 4.4 to our Form 8-K
filed November 21, 2025 (File No.: 000-21719).
Material Contracts
10.20† 	Steel Dynamics, Inc., Change in Control Benefit Plan, incorporated herein by reference from our Exhibit 10.20 to our 8-K filed
December 4, 2012 (File No.: 000-21719).
10.61† 	2018 Executive Incentive Compensation Plan, approved by stockholders on May 17, 2018, incorporated herein by reference
from our Definitive Proxy Statement on Schedule 14A filed March 28, 2018 (File No.: 000-21719).
10.62 	Credit Agreement dated as of July 19, 2023, among Steel Dynamics, Inc. and the agents and lenders named therein,
incorporated herein by reference from Exhibit 10.62 to our Form 8-K filed July 21, 2023 (File No.: 000-21719).
10.63† 	Steel Dynamics, Inc. 2023 Equity Incentive Plan, approved by stockholders on May 11, 2023, incorporated herein by
reference from our Definitive Proxy Statement on Schedule 14A filed March 30, 2023 (File No.: 000-21719).
10.64† 	Steel Dynamics, Inc. 2024 Employee Stock Purchase Plan, approved by stockholders on May 9, 2024, incorporated herein by
reference from our Definitive Proxy Statement on Schedule 14A filed March 28, 2024 (File No.: 000-21719).

-- 90 of 100 --

Table of Contents
89
Other
19.1 Policy Regarding Insider Trading and Certain Prohibited Transactions, incorporated herein by reference from Exhibit 19.1 to
our Form 10-K filed February 28, 2025 (File No.: 000-21719).
21.1* 	List of our Subsidiaries.
23.1* 	Consent of Ernst & Young LLP.
24.1 	Powers of attorney (see signature pages on pages 90 and 91 of this Report).
97.1 	Policy on Recoupment of Executive Officer Incentive-Based Compensation In the Event of Restatements, incorporated
herein by reference from Exhibit 97.1 to our Form 10-K filed February 29, 2024 (File No.: 000-21719).
Executive Officer Certifications
31.1* 	Certification of Chief Executive Officer required by Item 307 of Regulation S-K as promulgated by the Securities and
Exchange Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2* 	Certification of Chief Financial Officer required by Item 307 of Regulation S-K as promulgated by the Securities and
Exchange Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1* 	Certification of Chief Executive Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906 of the
Sarbanes-Oxley Act of 2002.
32.2* 	Certification of Chief Financial Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906 of the
Sarbanes-Oxley Act of 2002.
XBRL Documents
101.INS* 	XBRL Instance Document – the instance document does not appear in the Interactive Data File because its XBRL tags are
embedded within the Inline XBRL document.
101.SCH* 	Inline XBRL Taxonomy Extension Schema Document
101.CAL* 	Inline XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF* 	Inline XBRL Taxonomy Extension Definition Linkbase Document
101.LAB* 	Inline XBRL Taxonomy Extension Label Linkbase Document
101.PRE* 	Inline XBRL Taxonomy Presentation Linkbase Document
104* 	Cover page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)
* Filed concurrently herewith
† Indicates a management contract or compensatory plan or arrangement.

-- 91 of 100 --

Table of Contents
90
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of Securities Exchange Act of 1934, Steel Dynamics, Inc. has duly caused this report to
be signed on its behalf by the undersigned, thereunto duly authorized.
February 27, 2026
STEEL DYNAMICS, INC.
By: 	/s/ MARK D. MILLETT
Mark D. Millett
Chief Executive Officer
(Principal Executive Officer)
POWER OF ATTORNEY
Each person whose signature appears below constitutes and appoints Mark D. Millett and Theresa E. Wagler, either of whom may act
without the joinder of the other, as his or her true and lawful attorneys-in-fact and agents with full power of substitution and resubstitution,
for him or her, and in his or her name, place and stead, in any and all capacities to sign any and all amendments, and supplements to this 2025
Annual Report on Form 10-K, filed pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, and to file the same,
with all exhibits thereto, and all other documents in connection therewith, with the Securities and Exchange Commission, granting unto said
attorneys-in-fact and agents full power and authority to do and performs each and every act and thing requisite and necessary to be done, as
full to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and
agents or their substitute or substitutes may lawfully do or cause to be done by virtue thereof. Pursuant to the requirements of the
Securities Exchange Act of 1934, this 2025 Annual Report on Form 10-K has been signed below by the following persons on behalf of Steel
Dynamics, Inc. and in the capacities and on the dates indicated.
Signatures 	Title 	Date
/s/ MARK D. MILLETT 	Chairman and Chief Executive Officer 	February 27, 2026
Mark D. Millett 	(Principal Executive Officer)
/s/ THERESA E. WAGLER 	Executive Vice President and Chief Financial Officer 	February 27, 2026
Theresa E. Wagler 	(Principal Financial Officer and
Principal Accounting Officer)
/s/ SHEREE L. BARGABOS 	Director 	February 27, 2026
Sheree L. Bargabos
/s/ KENNETH W. CORNEW 	Director 	February 27, 2026
Kenneth W. Cornew
/s/ TRACI M. DOLAN 	Director 	February 27, 2026
Traci M. Dolan
/s/ JENNIFER L HAMANN 	Director 	February 27, 2026
Jennifer L. Hamann
/s/ BRADLEY S. SEAMAN 	Director 	February 27, 2026
Bradley S. Seaman
/s/ GABRIEL L. SHAHEEN 	Director 	February 27, 2026
Gabriel L. Shaheen

-- 92 of 100 --

Table of Contents
91
/s/ LUIS M. SIERRA 	Director 	February 27, 2026
Luis M. Sierra
/s/ RICHARD P. TEETS, JR. 	Director 	February 27, 2026
Richard P. Teets, Jr.

-- 93 of 100 --

EXHIBIT 21.1
STEEL DYNAMICS, INC.
LIST OF OUR SUBSIDIARIES
Name
State of
Incorporation
or
Organization
Percent of Capital
Stock/Equity Units
Owned by
Steel Dynamics, Inc.
Names Under which Business is
Conducted
Aluminum Dynamics, LLC 	Indiana 	94.4%
Mesabi Nugget Delaware, LLC 	Delaware 	86%
New Millennium Building Systems, LLC 	Indiana 	100%
OmniSource, LLC 	Indiana 	100% 	Omni
Roanoke Electric Steel Corporation 	Indiana 	100% 	Steel Dynamics Roanoke Bar Division
SDI Biocarbon Solutions, LLC 	Delaware 	75%
Steel Dynamics Columbus, LLC 	Indiana 	100%
Steel Dynamics Enterprises, Inc. 	Indiana 	100%
Steel Dynamics Heartland, LLC 	Indiana 	100%
Steel Dynamics Sales North America, Inc. 	Indiana 	100%
Steel Dynamics Southwest, LLC 	Indiana 	100%
Steel of West Virginia, Inc. 	Indiana 	100%
STLD Holdings, Inc. 	Indiana 	100%
New Process Steel, LLC 	Indiana 	100%
The Techs Industries, Inc. 	Indiana 	100% 	The Techs
The Techs a Division of Steel
Dynamics, Inc.
United Steel Supply, LLC 	Texas 	95%
Vulcan Threaded Products, Inc. 	Indiana 	100% 	Vulcan Steel Products
CLP Systems

-- 94 of 100 --

EXHIBIT 23.1
CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
We consent to the incorporation by reference in the following Registration Statements:
(1) Registration Statements (Form S-3 Nos. 333-235343, 333-268703, and 333-292101) of Steel Dynamics, Inc.,
(2) Registration Statement (Form S-8 No. 333-55888) pertaining to the Amended and Restated Officer and Manager Cash and Stock Bonus Plan of Steel
Dynamics, Inc.,
(3) Registration Statement (Form S-8 No. 333-133493) pertaining to the Plan Relating to Assumed Stock Options: Roanoke Electric Steel Corporation
Acquisition of Steel Dynamics, Inc., and
(4) Registration Statement (Form S-8 No. 333-147271) pertaining to the 2006 Equity Incentive Plan, the Steel Dynamics, Inc. Amended and Restated 1996
Incentive Stock Option Plan, and the Steel Dynamics, Inc. Non-Employee Directors Stock Option Plan of Steel Dynamics, Inc.;
of our reports dated February 27, 2026, with respect to the consolidated financial statements of Steel Dynamics, Inc. and the effectiveness of internal control
over financial reporting of Steel Dynamics, Inc. included in this Annual Report (Form 10-K) of Steel Dynamics, Inc. for the year ended December 31, 2025.
/s/ Ernst & Young LLP
Indianapolis, Indiana
February 27, 2026

-- 95 of 100 --

EXHIBIT 31.1
CERTIFICATION PURSUANT TO SECTION 302 OF THE
SARBANES-OXLEY ACT OF 2002
I, Mark D. Millett, certify that:
1. 	I have reviewed this annual report on Form 10-K of Steel Dynamics, Inc. for 2025;
2. 	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the
statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. 	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the
financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. 	The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in
Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for
the registrant and have:
(a) 	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to
ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those
entities, particularly during the period in which this report is being prepared;
(b) 	Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our
supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles;
(c) 	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the
effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) 	Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent
fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially
affect, the registrant’s internal control over financial reporting; and
5. 	The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the
registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) 	All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably
likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b) 	Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control
over financial reporting.
Date: February 27, 2026
/s/ MARK D. MILLETT
Mark D. Millett
Chairman and Chief Executive Officer
(Principal Executive Officer)

-- 96 of 100 --

EXHIBIT 31.2
CERTIFICATION PURSUANT TO SECTION 302 OF THE
SARBANES-OXLEY ACT OF 2002
I, Theresa E. Wagler, certify that:
1. 	I have reviewed this annual report on Form 10-K of Steel Dynamics, Inc. for 2025;
2. 	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the
statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. 	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the
financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. 	The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in
Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for
the registrant and have:
(a) 	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to
ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those
entities, particularly during the period in which this report is being prepared;
(b) 	Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our
supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external
purposes in accordance with generally accepted accounting principles;
(c) 	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the
effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) 	Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent
fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially
affect, the registrant’s internal control over financial reporting; and
5. 	The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the
registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) 	All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably
likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b) 	Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control
over financial reporting.
Date: 	February 27, 2026
/s/ THERESA E. WAGLER
Theresa E. Wagler
Executive Vice President and Chief Financial Officer
(Principal Financial Officer and Principal Accounting Officer)

-- 97 of 100 --

EXHIBIT 32.1
Chief Executive Officer Certification
Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to
Section 906 of the Sarbanes-Oxley Act of 2002
In connection with the Annual Report of Steel Dynamics, Inc. (the "Company”) on Form 10-K for the year ended December 31, 2025, as filed with the
Securities and Exchange Commission on the date hereof (the "Report”), the undersigned, Mark D. Millett, Chief Executive Officer of the Company, certifies,
pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
1. 	The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
2. 	The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the
Company.
/s/ MARK D. MILLETT
Mark D. Millett
Chairman and Chief Executive Officer
(Principal Executive Officer)
February 27, 2026
A signed original of this written statement required by Section 906 has been provided to Steel Dynamics, Inc. and will be retained by Steel Dynamics, Inc. and
furnished to the Securities and Exchange Commission or its staff upon request.

-- 98 of 100 --

EXHIBIT 32.2
Chief Financial Officer Certification
Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to
Section 906 of the Sarbanes-Oxley Act of 2002
In connection with the Annual Report of Steel Dynamics, Inc. (the "Company”) on Form 10-K for the year ended December 31, 2025, as filed with the
Securities and Exchange Commission on the date hereof (the "Report”), the undersigned, Theresa E. Wagler, Executive Vice President and Chief Financial
Officer of the Company, certifies, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
1. 	The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
2. 	The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the
Company.
/s/ THERESA E. WAGLER
Theresa E. Wagler
Executive Vice President and Chief Financial Officer
(Principal Financial Officer and Principal Accounting Officer)
February 27, 2026
A signed original of this written statement required by Section 906 has been provided to Steel Dynamics, Inc. and will be retained by Steel Dynamics, Inc. and
furnished to the Securities and Exchange Commission or its staff upon request.

-- 99 of 100 --



-- 100 of 100 --