QUARTERLY REPORT

Q3 2020 — Quarterly report (Form 10-Q)

Q3 2020PDF · 36 pages366 KB
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-Q
X 	Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the period
ended September 30, 2020
OR
☐ 	Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
Commission File Number 0-21719
Steel Dynamics, Inc.
(Exact name of registrant as specified in its charter)
Indiana 	35-1929476
(State or other jurisdiction of incorporation or organization) 	(I.R.S. Employer Identification No.)
7575 West Jefferson Blvd, Fort Wayne, IN 	46804
(Address of principal executive offices) 	(Zip Code)
Registrant’s telephone number, including area code: (260) 969-3500
Securities registered pursuant to Section 12(b) of the Act.
Title of each class 	Trading Symbol 	Name of each exchange on which registered
Common Stock voting, $0.0025 par value 	STLD 	NASDAQ Global Select Market
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act
of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been
subject to such filing requirements for the past 90 days. Yes  No 
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to
Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was
required to submit such files). Yes  No 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting
company, or an emerging growth company (see definitions of "large accelerated filer,” "accelerated filer,” "smaller reporting company,” and
"emerging growth company” in Rule 12b-2 of the Exchange Act).
Large accelerated filer  	Accelerated filer  	Non-accelerated filer 
Smaller reporting company ☐ 	Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying
with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No
As of October 29, 2020, Registrant had 210,366,497 outstanding shares of common stock.

-- 1 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
Table of Contents
PART I. Financial Information
Item 1. 	Financial Statements: 	Page
Consolidated Balance Sheets as of September 30, 2020 (unaudited) and December 31, 2019 	1
Consolidated Statements of Income for the three and nine-month periods ended September 30, 2020 and 2019 (unaudited) 	2
Consolidated Statements of Comprehensive Income for the three and nine-month periods ended September 30, 2020 and
2019 (unaudited)
3
Consolidated Statements of Cash Flows for the three and nine-month periods ended September 30, 2020 and 2019 (unaudited) 	4
Notes to Consolidated Financial Statements (unaudited) 	5
Item 2. 	Management’s Discussion and Analysis of Financial Condition and Results of Operations 	16
Item 3. 	Quantitative and Qualitative Disclosures about Market Risk 	24
Item 4. 	Controls and Procedures 	25
PART II. Other Information
Item 1. 	Legal Proceedings 	26
Item 1A. 	Risk Factors 	26
Item 2. 	Unregistered Sales of Equity Securities and Use of Proceeds 	27
Item 3. 	Defaults Upon Senior Securities 	27
Item 4. 	Mine Safety Disclosures 	27
Item 5. 	Other Information 	27
Item 6. 	Exhibits 	28
Exhibit Index 	28
Signature 	29

-- 2 of 36 --

Table of Contents
1
STEEL DYNAMICS, INC.
CONSOLIDATED BALANCE SHEETS
(in thousands, except share data)
September 30, 	December 31,
2020 	2019
Assets 	(unaudited)
Current assets
Cash and equivalents 	$ 	1,267,618 	$ 	1,381,460
Short-term investments 	- 	262,174
Accounts receivable, net 	915,223 	841,378
Accounts receivable-related parties 	3,619 	2,958
Inventories 	1,609,216 	1,689,043
Other current assets 	59,219 	76,012
Total current assets 	3,854,895 	4,253,025
Property, plant and equipment, net 	3,862,375 	3,135,886
Intangible assets, net 	306,574 	327,901
Goodwill 	474,520 	452,915
Other assets 	119,192 	106,038
Total assets 	$ 	8,617,556 	$ 	8,275,765
Liabilities and Equity
Current liabilities
Accounts payable 	$ 	702,991 	$ 	509,687
Accounts payable-related parties 	12,690 	3,657
Income taxes payable 	827 	2,014
Accrued payroll and benefits 	177,935 	208,287
Accrued interest 	27,649 	18,292
Accrued expenses 	171,307 	175,405
Current maturities of long-term debt 	82,229 	89,356
Total current liabilities 	1,175,628 	1,006,698
Long-term debt 	2,636,615 	2,644,988
Deferred income taxes 	512,503 	484,169
Other liabilities 	94,011 	75,055
Total liabilities 	4,418,757 	4,210,910
Commitments and contingencies
Redeemable noncontrolling interests 	155,414 	143,614
Equity
Common stock voting, $.0025 par value; 900,000,000 shares authorized;
266,072,787 and 266,072,787 shares issued; and 210,366,497 and 214,502,639
shares outstanding, as of September 30, 2020 and December 31, 2019, respectively 	646 	646
Treasury stock, at cost; 55,706,290 and 51,570,148 shares,
as of September 30, 2020 and December 31, 2019, respectively 	(1,623,805) 	(1,525,113)
Additional paid-in capital 	1,200,228 	1,181,012
Retained earnings 	4,624,019 	4,419,296
Accumulated other comprehensive income (loss) 	95 	(7)
Total Steel Dynamics, Inc. equity 	4,201,183 	4,075,834
Noncontrolling interests 	(157,798) 	(154,593)
Total equity 	4,043,385 	3,921,241
Total liabilities and equity 	$ 	8,617,556 	$ 	8,275,765
See notes to consolidated financial statements.

-- 3 of 36 --

Table of Contents
2
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF INCOME (UNAUDITED)
(in thousands, except per share data)
Three Months Ended 	Nine Months Ended
September 30, 	September 30,
2020 	2019 	2020 	2019
Net sales
Unrelated parties 	$ 	2,327,224 $ 	2,523,279 $ 	6,991,732 $ 	8,104,129
Related parties 	3,608 	3,566 	8,505 	10,666
Total net sales 	2,330,832 	2,526,845 	7,000,237 	8,114,795
Costs of goods sold 	2,038,017 	2,167,006 	6,007,762 	6,900,220
Gross profit 	292,815 	359,839 	992,475 	1,214,575
Selling, general and administrative expenses 	118,235 	107,242 	340,432 	324,530
Profit sharing 	11,778 	17,848 	42,324 	64,396
Amortization of intangible assets 	6,946 	6,704 	21,327 	20,730
Operating income 	155,856 	228,045 	588,392 	804,919
Interest expense, net of capitalized interest 	18,950 	31,339 	74,671 	94,782
Other (income) expense, net 	3,546 	(4,545) 	29,060 	(15,137)
Income before income taxes 	133,360 	201,251 	484,661 	725,274
Income tax expense 	29,083 	48,643 	110,783 	171,093
Net income 	104,277 	152,608 	373,878 	554,181
Net income attributable to noncontrolling interests 	(4,134) 	(1,560) 	(10,899) 	(4,503)
Net income attributable to Steel Dynamics, Inc. 	$ 	100,143 $ 	151,048 $ 	362,979 $ 	549,678
Basic earnings per share attributable to Steel Dynamics,
Inc. stockholders 	$ 	0.48 $ 	0.69 $ 	1.72 $ 	2.49
Weighted average common shares outstanding 	210,366 	217,873 	211,321 	221,145
Diluted earnings per share attributable to Steel Dynamics, Inc.
stockholders, including the effect of assumed conversions
when dilutive 	$ 	0.47 $ 	0.69 $ 	1.71 $ 	2.47
Weighted average common shares and share equivalents outstanding 	211,926 	219,109 	212,443 	222,197
Dividends declared per share 	$ 	0.25 $ 	0.24 $ 	0.75 $ 	0.72
See notes to consolidated financial statements.

-- 4 of 36 --

Table of Contents
3
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (UNAUDITED)
(in thousands)
Three Months Ended 	Nine Months Ended
September 30, 	September 30,
2020 	2019 	2020 	2019
Net income 	$ 	104,277 $ 	152,608 $ 	373,878 $ 	554,181
Other comprehensive income (loss) - net unrealized gain (loss) on
cash flow hedging derivatives, net of income tax 	(121) 	(39) 	102 	(262)
Comprehensive income 	104,156 	152,569 	373,980 	553,919
Comprehensive income attributable to noncontrolling interests 	(4,134) 	(1,560) 	(10,899) 	(4,503)
Comprehensive income attributable to Steel Dynamics, Inc. 	$ 	100,022 $ 	151,009 $ 	363,081 $ 	549,416
See notes to consolidated financial statements.

-- 5 of 36 --

Table of Contents
4
STEEL DYNAMICS, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS (UNAUDITED)
(in thousands)
Three Months Ended 	Nine Months Ended
September 30, 	September 30,
2020 	2019 	2020 	2019
Operating activities:
Net income 	$ 	104,277 $ 	152,608 $ 	373,878 $ 	554,181
Adjustments to reconcile net income to net cash provided by
operating activities:
Depreciation and amortization 	81,752 	79,470 	240,732 	240,555
Equity-based compensation 	9,486 	8,841 	36,850 	33,229
Deferred income taxes 	10,388 	11,311 	30,949 	34,952
Other adjustments 	17,237 	(1,116) 	21,701 	(952)
Changes in certain assets and liabilities:
Accounts receivable 	(58,271) 	85,633 	(57,991) 	95,195
Inventories 	(38,236) 	35,479 	83,790 	139,889
Other assets 	(3,894) 	39 	5,702 	7,632
Accounts payable 	645 	1,111 	121,764 	(54,167)
Income taxes receivable/payable 	(27,127) 	6,293 	33,251 	19,715
Accrued expenses 	55,533 	64,533 	(41,545) 	(83,001)
Net cash provided by operating activities 	151,790 	444,202 	849,081 	987,228
Investing activities:
Purchases of property, plant and equipment 	(327,647) 	(154,131) 	(854,898) 	(293,687)
Purchases of short-term investments 	- 	(34,884) 	(149,359) 	(134,026)
Proceeds from maturities of short-term investments 	69,545 	79,508 	411,533 	293,279
Acquisition of business, net of cash and restricted cash acquired 	(59,012) 	(3,694) 	(59,012) 	(97,106)
Other investing activities 	380 	2,746 	1,701 	4,023
Net cash used in investing activities 	(316,734) 	(110,455) 	(650,035) 	(227,517)
Financing activities:
Issuance of current and long-term debt 	295,814 	128,230 	1,611,849 	374,686
Repayment of current and long-term debt 	(305,911) 	(119,988) 	(1,645,482) 	(369,134)
Dividends paid 	(52,592) 	(52,751) 	(156,657) 	(148,493)
Purchases of treasury stock 	- 	(114,950) 	(106,529) 	(292,394)
Other financing activities 	(1,587) 	(1,527) 	(16,502) 	(7,259)
Net cash used in financing activities 	(64,276) 	(160,986) 	(313,321) 	(442,594)
Increase (decrease) in cash, cash equivalents, and restricted cash 	(229,220) 	172,761 	(114,275) 	317,117
Cash, cash equivalents, and restricted cash at beginning of period 	1,502,342 	978,779 	1,387,397 	834,423
Cash, cash equivalents, and restricted cash at end of period 	$ 	1,273,122 $ 	1,151,540 $ 	1,273,122 $ 	1,151,540
Supplemental disclosure information:
Cash paid for interest 	$ 	8,597 $ 	9,115 $ 	77,050 $ 	71,702
Cash paid for income taxes, net 	$ 	43,900 $ 	29,794 $ 	45,848 $ 	116,149
See notes to consolidated financial statements.

-- 6 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
5
Note 1. Description of the Business and Significant Accounting Policies
Description of the Business
Steel Dynamics, Inc. (SDI), together with its subsidiaries (the company), is a domestic manufacturer of steel products and metals recycler. The company
has three reportable segments: steel operations, metals recycling operations, and steel fabrication operations.
Steel Operations Segment. Steel operations include the company’s Butler Flat Roll Division, Columbus Flat Roll Division, The Techs galvanizing lines,
Heartland Flat Roll Division, United Steel Supply, Structural and Rail Division, Engineered Bar Products Division, Vulcan Threaded Products, Inc., Roanoke
Bar Division, Steel of West Virginia, and Iron Dynamics, a liquid pig iron (scrap substitute) production facility that supplies solely the Butler Flat Roll
Division. These operations include electric arc furnace steel mills, producing steel from ferrous scrap and scrap substitutes, utilizing continuous casting,
automated rolling mills, with several coating and processing lines. Steel operations accounted for 73% and 76% of the company’s consolidated external net
sales during the three-month periods ended September 30, 2020 and 2019, and 75% and 76% during the nine-month periods ended September 30, 2020 and
2019, respectively.
Metals Recycling Operations Segment. Metals recycling operations consists of OmniSource, LLC (OmniSource), and includes both ferrous and
nonferrous processing, transportation, marketing, brokerage, and scrap management services, including Omni Mexico (formerly Zimmer, S.A de C.V),
acquired August 3, 2020 (refer to Note 2. Acquisition). Metals recycling operations accounted for 12% and 11% of the company’s consolidated external net
sales during the three-month periods ended September 30, 2020 and 2019, respectively, and 10% and 12% during the nine-month periods ended September
30, 2020 and 2019, respectively.
Steel Fabrication Operations Segment. Steel fabrication operations include the company’s New Millennium Building Systems’ joist and deck plants
located throughout the United States, and in Northern Mexico. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists
and steel deck used within the non-residential construction industry. Steel fabrication operations accounted for 10% of the company’s consolidated external
net sales during the three-month periods ended September 30, 2020 and 2019, and 10% and 9% of the company’s consolidated external net sales during the
nine-month periods ended September 30, 2020 and 2019, respectively.
Other. Other operations consists of subsidiary operations that are below the quantitative thresholds required for reportable segments and primarily
consist of smaller joint ventures, and the idle Minnesota ironmaking operations. Also included in "Other” are certain unallocated corporate accounts, such as
the company’s senior unsecured credit facility, senior notes, certain other investments and certain profit sharing expenses.
Significant Accounting Policies
Principles of Consolidation. The consolidated financial statements include the accounts of SDI, together with its wholly- and majority-owned or
controlled subsidiaries, after elimination of intercompany accounts and transactions. Noncontrolling and redeemable noncontrolling interests represent the
noncontrolling owner’s proportionate share in the equity, income, or losses of the company’s majority-owned or controlled consolidated subsidiaries.
Use of Estimates. These consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States,
and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the consolidated financial
statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment,
intangible assets, and goodwill; allowances for credit losses for trade receivables, inventories and deferred income tax assets; unrecognized tax benefits;
potential environmental liabilities; and litigation claims and settlements. Actual results may differ from these estimates and assumptions.
In the opinion of management, these financial statements reflect all normal recurring adjustments necessary for a fair presentation of the interim period
results. These consolidated financial statements and notes should be read in conjunction with the audited financial statements and notes thereto included in
the company’s Annual Report on Form 10-K for the year ended December 31, 2019.

-- 7 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
6
Note 1. Description of the Business and Significant Accounting Policies (Continued)
Cash and Equivalents, and Restricted Cash
Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted cash and
equivalents is primarily funds held in escrow as required by various insurance and government organizations. The balance of cash, cash equivalents and
restricted cash in the consolidated statements of cash flows includes restricted cash of $5.5 million at September 30, 2020 and 2019, $5.9 million at June 30,
2020 and December 31, 2019, and $6.2 million at June 30, 2019 and December 31, 2018, which are recorded in Other Assets (noncurrent) in the company’s
consolidated balance sheets.
Goodwill
The company’s goodwill consisted of the following at September 30, 2020, and December 31, 2019, (in thousands):
September 30, December 31,
2020 	2019
Steel Operations Segment 	$ 	272,133 $ 	272,133
Metals Recycling Operations Segment 	200,462 	178,857
Steel Fabrication Operations Segment 	1,925 	1,925
$ 	474,520 $ 	452,915
The company acquired Omni Mexico (formerly Zimmer S.A. de C.V.) on August 3, 2020 (refer to Note 2. Acquisition) resulting in a preliminary
purchase price allocation in which $24.1 million of goodwill was recorded in the Metals Recycling Operations segment. Metals Recycling Operations
Segment goodwill decreased $2.5 million from December 31, 2019 to September 30, 2020, in recognition of the 2020 tax benefit related to the normal
amortization of the component of OmniSource tax-deductible goodwill in excess of book goodwill.
Credit Losses
ASU 2016-13, Financial Instruments - Credit Losses and its subsequent corresponding updates (ASC 326), requires an entity to use a forward-looking
expected loss model versus the incurred loss model for most financial instruments, including accounts receivable. The company adopted ASC 326 effective
January 1, 2020, using the modified retrospective transition method, with no impact on the company’s financial position, results of operations or cash flows.
The company is exposed to credit risk in the event of nonpayment of accounts receivable by customers. The company mitigates its exposure to credit
risk, which it generally extends on an unsecured basis, by performing ongoing credit evaluations and taking further action if necessary, such as requiring letters
of credit or other security interests to support the customer receivable. The allowance for credit losses for accounts receivable is based on the company’s
reasonable estimate of known credit risks and historical experience, adjusted for current and anticipated economic and other pertinent factors affecting the
company’s customers, that may differ from historical experience. Customer accounts receivable are written off when all collection efforts have been exhausted
and the amounts are deemed uncollectible.
At September 30, 2020, the company reported $918.8 million of accounts receivable, net of allowances for credit losses of $8.3 million. Changes in the
allowance were not material for the three and nine-month periods ended September 30, 2020.

-- 8 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
7
Note 2. Acquisition
On August 3, 2020, the company acquired Zimmer, S.A. de C.V. ("Zimmer”) for cash consideration of $59.0 million, a portion of which was used to
pay off all existing borrowings of Zimmer in accordance with the purchase agreement. The transaction was funded with available cash. The acquisition of
Zimmer is part of the company’s raw material procurement strategy to support its new Texas flat roll steel mill, which is planned to begin operations mid-
year 2021. Zimmer is headquartered in Monterrey, Mexico and operates six ferrous and nonferrous scrap facilities strategically positioned near high-volume
industrial scrap sources located throughout Central and Northern Mexico, and several third party scrap processing locations. The aggregate purchase price
was preliminarily allocated to the opening balance sheet of Zimmer as of August 3, 2020, based on the information available as of the acquisition date to
estimate the fair value of assets acquired and liabilities assumed: current assets of $30.0 million; property, plant, and equipment of $18.3 million; goodwill of
$24.1 million; and liabilities assumed of $13.4 million. The accounting for the acquisition has not yet been completed because the company has not finalized
the valuations of the acquired assets, identifiable intangible assets, if any, including goodwill, and assumed liabilities.
Note 3. Earnings Per Share
Basic earnings per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per share assumes the
weighted average dilutive effect of common share equivalents outstanding during the period applied to the company’s basic earnings per share. Common share
equivalents represent potentially dilutive restricted stock units, deferred stock units, restricted stock, and performance awards, and are excluded from the
computation in periods in which they have an anti-dilutive effect. There were no anti-dilutive common share equivalents as of or for the three and nine-month
periods ended September 30, 2020 and 2019.
Three Months Ended September 30,
2020 	2019
Weighted 	Weighted
Average 	Average
Net Income 	Shares 	Per Share 	Net Income 	Shares 	Per Share
(Numerator) 	(Denominator) 	Amount 	(Numerator) 	(Denominator) 	Amount
Basic earnings per share 	$ 	100,143 	210,366 	$ 	0.48 $ 	151,048 	217,873 	$ 	0.69
Dilutive common share equivalents 	- 	1,560 	- 	1,236
Diluted earnings per share 	$ 	100,143 	211,926 	$ 	0.47 $ 	151,048 	219,109 	$ 	0.69
Nine Months Ended September 30,
2020 	2019
Weighted 	Weighted
Average 	Average
Net Income 	Shares 	Per Share 	Net Income 	Shares 	Per Share
(Numerator) 	(Denominator) 	Amount 	(Numerator) 	(Denominator) 	Amount
Basic earnings per share 	$ 	362,979 	211,321 	$ 	1.72 $ 	549,678 	221,145 	$ 	2.49
Dilutive common share equivalents 	- 	1,122 	- 	1,052
Diluted earnings per share 	$ 	362,979 	212,443 	$ 	1.71 $ 	549,678 	222,197 	$ 	2.47

-- 9 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
8
Note 4. Inventories
Inventories are stated at lower of cost or net realizable value. Cost is determined using a weighted average cost method for raw materials and supplies,
and on a first-in, first-out basis for other inventory. Inventory consisted of the following (in thousands):
September 30, 	December 31,
2020 	2019
Raw materials 	$ 	628,911 	$ 	686,831
Supplies 	497,274 	498,298
Work in progress 	149,929 	154,669
Finished goods 	333,102 	349,245
Total inventories 	$ 	1,609,216 	$ 	1,689,043
Note 5. Debt
In October 2020, the company issued $350.0 million of 1.650% notes due 2027 and $400.0 million of 3.250% notes due 2050. The net proceeds from
these notes will be used to fund the November 2020 call and redemption of the $350.0 million outstanding principal amount of the company’s 4.125% senior
notes due 2025 at a redemption price of 102.063%, plus accrued and unpaid interest to, but not including, the date of redemption, and for general corporate
purposes. The company will record expenses related to premiums and write off of unamortized debt issuance costs of approximately $10.3 million in other
expenses in the fourth quarter of 2020.
In June 2020, the company issued $400.0 million of 2.400% notes due 2025 and $500.0 million of 3.250% notes due 2031. The net proceeds from these
notes were used to fund the June 2020 call and redemption of the $400.0 million outstanding principal amount of the company’s 5.250% senior notes due
2023 at a redemption price of 100.875%, and the $500.0 million outstanding principal amount of the company’s 5.500% senior notes due 2024 at a
redemption price of 102.750%, plus accrued and unpaid interest to, but not including, the date of redemption. The company recorded expenses related to
premiums, write off of unamortized debt issuance costs, and other expenses of approximately $22.8 million, which are reflected in other expenses in the
consolidated statements of income for the nine-month period ended September 30, 2020.

-- 10 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
9
Note 6. Changes in Equity
The following tables provide a reconciliation of the beginning and ending carrying amounts of total equity, equity attributable to stockholders of Steel
Dynamics, Inc., and equity and redeemable amounts attributable to noncontrolling interests (in thousands) for the three and nine-month periods ended
September 30, 2020 and 2019:
Stockholders of Steel Dynamics, Inc.
Accumulated
Additional 	Other 	Redeemable
Common Treasury 	Paid-In 	Retained Comprehensive Noncontrolling 	Total 	Noncontrolling
Stock 	Stock 	Capital 	Earnings Income (Loss) 	Interests 	Equity 	Interests
Balances at December 31, 2019 	$ 	646 $ (1,525,113)$ 1,181,012 $ 4,419,296 $ 	(7) $ 	(154,593) $ 3,921,241 $ 	143,614
Dividends declared 	- 	- 	- 	(52,585) 	- 	- 	(52,585) 	-
Noncontrolling investors of USS 	- 	- 	- 	- 	- 	(7,504) 	(7,504) 	7,400
Share repurchases 	- 	(106,529) 	- 	- 	- 	- 	(106,529) 	-
Equity-based compensation 	- 	6,834 	2,764 	(169) 	- 	- 	9,429 	-
Net income 	- 	- 	- 	187,340 	- 	3,496 	190,836 	-
Other comprehensive income, net of tax 	- 	- 	- 	- 	37 	- 	37 	-
Balances at March 31, 2020 	646 (1,624,808) 1,183,776 4,553,882 	30 	(158,601) 3,954,925 	151,014
Dividends declared 	- 	- 	- 	(52,591) 	- 	- 	(52,591) 	-
Noncontrolling investors of USS 	- 	- 	- 	- 	- 	(2,410) 	(2,410) 	1,400
Share repurchases 	- 	- 	- 	- 	- 	- 	- 	-
Equity-based compensation 	- 	953 	7,838 	(158) 	- 	- 	8,633 	-
Net income 	- 	- 	- 	75,496 	- 	3,269 	78,765 	-
Other comprehensive income, net of tax 	- 	- 	- 	- 	186 	- 	186 	-
Balances at June 30, 2020 	646 (1,623,855) 1,191,614 4,576,629 	216 	(157,742) 3,987,508 	152,414
Dividends declared 	- 	- 	- 	(52,592) 	- 	- 	(52,592) 	-
Noncontrolling investors of USS 	- 	- 	- 	- 	- 	(4,190) 	(4,190) 	3,000
Share repurchases 	- 	- 	- 	- 	- 	- 	- 	-
Equity-based compensation 	- 	50 	8,614 	(161) 	- 	- 	8,503 	-
Net income 	- 	- 	- 	100,143 	- 	4,134 	104,277 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	(121) 	- 	(121) 	-
Balances at September 30, 2020 	$ 	646 $ (1,623,805)$ 1,200,228 $ 4,624,019 $ 	95 $ 	(157,798) $ 4,043,385 $ 	155,414
Stockholders of Steel Dynamics, Inc.
Accumulated
Additional 	Other 	Redeemable
Common Treasury 	Paid-In 	Retained Comprehensive Noncontrolling 	Total 	Noncontrolling
Stock 	Stock 	Capital 	Earnings 	Income (Loss) 	Interests 	Equity 	Interests
Balances at December 31, 2018 	$ 	645 $ (1,184,243) $ 1,160,048 $ 3,958,320 $ 	301 $ 	(159,082) $ 3,775,989 $ 	111,240
Dividends declared 	- 	- 	- 	(53,504) 	- 	- 	(53,504) 	-
Noncontrolling investors of USS 	- 	- 	- 	- 	- 	- 	28,690
Share repurchases 	- 	(84,308) 	- 	- 	- 	- 	(84,308) 	-
Equity-based compensation 	- 	6,714 	91 	(110) 	- 	- 	6,695 	-
Net income 	- 	- 	- 	204,328 	- 	499 	204,827 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	(171) 	- 	(171) 	-
Balances at March 31, 2019 	645 	(1,261,837) 1,160,139 4,109,034 	130 	(158,583) 3,849,528 	139,930
Dividends declared 	- 	- 	- 	(52,751) 	- 	- 	(52,751) 	-
Share repurchases 	- 	(93,136) 	- 	- 	- 	- 	(93,136) 	-
Equity-based compensation 	- 	816 	7,366 	(166) 	- 	- 	8,016 	-
Net income 	- 	- 	- 	194,302 	- 	2,444 	196,746 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	(52) 	- 	(52) 	-
Balances at June 30, 2019 	645 	(1,354,157) 1,167,505 4,250,419 	78 	(156,139) 3,908,351 	139,930
Dividends declared 	- 	- 	- 	(51,778) 	- 	- 	(51,778) 	-
Noncontrolling investors of USS 	- 	- 	- 	- 	- 	(1,321) 	(1,321) 	3,684
Share repurchases 	- 	(114,950) 	- 	- 	- 	- 	(114,950) 	-
Equity-based compensation 	- 	29 	8,007 	(166) 	- 	- 	7,870 	-
Net income 	- 	- 	- 	151,048 	- 	1,560 	152,608 	-
Other comprehensive loss, net of tax 	- 	- 	- 	- 	(39) 	- 	(39) 	-
Balances at September 30, 2019 	$ 	645 $ (1,469,078) $ 1,175,512 $ 4,349,523 $ 	39 $ 	(155,900) $ 3,900,741 $ 	143,614

-- 11 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
10
Note 7. Derivative Financial Instruments
The company is exposed to certain risks relating to its ongoing business operations. The company utilizes derivative instruments to mitigate commodity
margin risk, and occasionally to mitigate foreign currency exchange rate risk, and have in the past to mitigate interest rate fluctuation risk. The company
routinely enters into forward exchange traded futures and option contracts to manage the price risk associated with nonferrous metals inventory as well as
purchases and sales of nonferrous and ferrous metals (primarily aluminum and copper). The company offsets fair value amounts recognized for derivative
instruments executed with the same counterparty under master netting agreements.
Commodity Futures Contracts. If the company is "long” on futures contracts, it means the company has more futures contracts purchased than futures
contracts sold for the underlying commodity. If the company is "short” on a futures contract, it means the company has more futures contracts sold than
futures contracts purchased for the underlying commodity. The following summarizes the company’s significant futures contract commitments as of
September 30, 2020:
Commodity Futures 	Long/Short 	Metric Tons
Aluminum 	Long 	1,850
Aluminum 	Short 	3,450
Copper 	Long 	4,831
Copper 	Short 	16,284
The following summarizes the location and amounts of the fair values reported on the company’s consolidated balance sheets as of September 30, 2020,
and December 31, 2019, and gains and losses related to derivatives included in the company’s statement of income for the three- and nine-month periods
ended September 30, 2020, and 2019 (in thousands):
Asset Derivatives 	Liability Derivatives
Balance sheet 	Fair Value 	Fair Value
location 	September 30, 2020 December 31, 2019 September 30, 2020 December 31, 2019
Derivative instruments designated as hedges
Commodity futures 	Other current assets $ 	2,012 $ 	966 $ 	827 $ 	1,011
Derivative instruments not designated as hedges
Commodity futures 	Other current assets 	949 	310 	667 	721
Total derivative instruments 	$ 	2,961 $ 	1,276 $ 	1,494 $ 	1,732
The fair value of the above derivative instruments along with required margin deposit amounts with the same counterparty under master netting
arrangements totaled $3.5 million at September 30, 2020, and $3.7 million at December 31, 2019, and are reflected in other current assets in the consolidated
balance sheets.

-- 12 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
11
Note 7. Derivative Financial Instruments (Continued)
Amount of gain (loss) 	Amount of gain (loss)
recognized in income 	Location of gain 	recognized in income
Location of gain 	on derivatives for the 	(loss) recognized 	on derivatives for the
(loss) recognized 	three months ended 	Hedged items in 	in income on 	three months ended
in income on 	September 30, 	fair value hedge 	related hedged 	September 30,
derivatives 	2020 	2019 	relationships 	items 	2020 	2019
Derivatives in fair value
hedging relationships
Commodity futures 	Costs of goods sold 	$ 	3,545 $ 	302 Firm commitments Costs of goods sold $ 	(2,156) $ 	(519)
Inventory 	Costs of goods sold 	(1,682) 	(182)
Derivatives not designated 	$ 	(3,838) $ 	(701)
as hedging instruments
Commodity futures 	Costs of goods sold 	$ 	(10,289) $ 	4,536
Amount of gain (loss) 	Amount of gain (loss)
recognized in income 	Location of gain 	recognized in income
Location of gain 	on derivatives for the 	(loss) recognized 	on derivatives for the
(loss) recognized 	nine months ended 	Hedged items in 	in income on 	nine months ended
in income on 	September 30, 	fair value hedge 	related hedged 	September 30,
derivatives 	2020 	2019 	relationships 	items 	2020 	2019
Derivatives in fair value
hedging relationships
Commodity futures 	Costs of goods sold 	$ 	1,096 $ 	(560) Firm commitments Costs of goods sold $ 	(901) $ 	(603)
Inventory 	Costs of goods sold 	(342) 	245
Derivatives not designated 	$ 	(1,243) $ 	(358)
as hedging instruments
Commodity futures 	Costs of goods sold 	$ 	(639) $ 	5,946
Derivatives accounted for as fair value hedges had ineffectiveness resulting in gains of $110,000 and $69,000 during the three-month periods ended
September 30, 2020, and 2019, respectively, and gains of $51,000 and $101,000 during the nine-month periods ended September 30, 2020, and 2019,
respectively. Losses excluded from hedge effectiveness testing of $403,000 and $399,000 increased cost of goods sold during the three-month periods ended
September 30, 2020, and 2019, respectively. Losses excluded from hedge effectiveness testing of $198,000 and $918,000 increased cost of goods sold during
the nine-month periods ended September 30, 2020, and 2019, respectively.
Derivatives accounted for as cash flow hedges resulted in net losses of $274,000 and $8,000 recognized in other comprehensive income for the three-
month periods ended September 30, 2020, and 2019, respectively, and net gains of $217,000 and $139,000 for the nine-month periods ended September 30,
2020, and 2019, respectively. Net losses of $115,000 and net gains of $43,000 were reclassified from accumulated other comprehensive income for the three-
month periods ended September 30, 2020, and 2019, respectively, and net gains of $84,000 and $43,000 for the nine-month periods ended September 30,
2020, and 2019, respectively. At September 30, 2020, the company expects to reclassify all $124,000 of net gains on derivative instruments from
accumulated other comprehensive income to earnings during the next 12 months due to the settlement of futures contracts.
Note 8. Fair Value Measurements
Accounting standards provide a comprehensive framework for measuring fair value and sets forth a definition of fair value and establishes a hierarchy
prioritizing the inputs to valuation techniques, giving the highest priority to quoted prices in active markets for identical assets and liabilities and the lowest
priority to unobservable value inputs. Levels within the hierarchy are defined as follows:
● Level 1—Unadjusted quoted prices for identical assets and liabilities in active markets;
● Level 2—Quoted prices for similar assets and liabilities in active markets (other than those included in Level 1) which are observable for the asset
or liability, either directly or indirectly; and
● Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable.

-- 13 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
12
Note 8. Fair Value Measurements (Continued)
The following table sets forth financial assets and liabilities measured at fair value on a recurring basis in the consolidated balance sheet and the
respective levels to which the fair value measurements are classified within the fair value hierarchy as of September 30, 2020, and December 31, 2019 (in
thousands):
Quoted Prices 	Significant
in Active 	Other 	Significant
Markets for 	Observable 	Unobservable
Identical Assets 	Inputs 	Inputs
Total 	(Level 1) 	(Level 2) 	(Level 3)
September 30, 2020
Commodity futures – financial assets 	$ 	2,961 	$ 	- 	$ 	2,961 	$ 	-
Commodity futures – financial liabilities 	1,494 	- 	1,494 	-
December 31, 2019
Short-term investments 	$ 	262,174 	$ 	- 	$ 	262,174 	$ 	-
Commodity futures – financial assets 	1,276 	- 	1,276 	-
Commodity futures – financial liabilities 	1,732 	- 	1,732 	-
The carrying amounts of financial instruments including cash and equivalents, and restricted cash approximate fair value
(Level 1). The fair values of short-term investments and the commodity futures contracts are estimated by the use of quoted market prices, estimates
obtained from brokers, and other appropriate valuation techniques based on references available (Level 2). The fair value of long-term debt, including current
maturities, as determined by quoted market prices (Level 2), was approximately $2.9 billion and $2.8 billion at September 30, 2020, and December 31, 2019,
respectively (with a corresponding carrying amount in the consolidated balance sheet of $2.7 billion at September 30, 2020 and $2.8 billion at December 31,
2019).
Note 9. Commitments and Contingencies
The company is involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations,
environmental matters, and commercial and construction contract disputes, none of which are expected to have a material impact on our financial condition,
results of operations, or liquidity.
Note 10. Segment Information
The company’s operations are primarily organized and managed by reportable operating segments, which are steel operations, metals recycling
operations, and steel fabrication operations. The segment operations are more fully described in Note 1 to the consolidated financial statements. Operating
segment performance and resource allocations are primarily based on operating results before income taxes. The accounting policies of the reportable
segments are consistent with those described in Note 1 to the consolidated financial statements. Intra-segment sales and any related profits are eliminated in
consolidation. Amounts included in the category "Other” are from subsidiary operations that are below the quantitative thresholds required for reportable
segments and primarily consist of smaller joint ventures, and the idle Minnesota ironmaking operations. Also included in "Other” are certain unallocated
corporate accounts, such as the company’s senior unsecured credit facility, senior notes, certain other investments and certain profit sharing expenses.

-- 14 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
13
Note 10. Segment Information (Continued)
The company’s segment results, including disaggregated revenue by segment to external, external non-United States, and other segment customers, are as
follows (in thousands):
Metals 	Steel
For the three months ended 	Steel 	Recycling 	Fabrication
September 30, 2020 	Operations 	Operations 	Operations 	Other 	Eliminations 	Consolidated
Net sales - disaggregated revenue
External 	$ 	1,634,122 $ 	202,034 $ 	241,440 $ 	120,175 	$ 	- 	$ 	2,197,771
External Non-U.S. 	62,409 	70,429 	98 	125 	- 	133,061
Other segments 	79,253 	364,010 	5,052 	62 	(448,377) 	-
1,775,784 	636,473 	246,590 	120,362 	(448,377) 	2,330,832
Operating income (loss) 	139,466 	12,668 	39,231 	(34,384)(1) 	(1,125) 	155,856
Income (loss) before income taxes 	126,825 	12,051 	38,374 	(42,484) 	(1,406)(2) 	133,360
Depreciation and amortization 	63,538 	12,368 	2,634 	3,212 	- 	81,752
Capital expenditures 	309,421 	5,674 	5,113 	7,439 	- 	327,647
As of September 30, 2020
Assets 	$ 	5,839,628 $ 	1,026,630 $ 	373,085 $ 	1,442,910 (3) $ 	(64,697)(4) $ 	8,617,556
Footnotes related to the three months ended September 30, 2020, segment results (in millions):
(1) Corporate SG&A 	$ 	(14.2) 	(2) Gross profit decrease from intra-company sales 	$ 	1.4
Company-wide equity-based compensation 	(9.6)
Profit sharing 	(10.5)
Other, net 	(0.1)
$ 	(34.4)
(3) Cash and equivalents 	$ 	1,162.3 	(4) Elimination of intra-company receivables 	$ 	(49.1)
Accounts receivable 	12.1 	Elimination of intra-company debt 	(7.2)
Inventories 	61.9 	Other 	(8.4)
Property, plant and equipment, net 	152.8 	$ 	(64.7)
Intra-company debt 	7.2
Other 	46.6
$ 	1,442.9

-- 15 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
14
Note 10. Segment Information (Continued)
Metals 	Steel
For the three months ended 	Steel 	Recycling 	Fabrication
September 30, 2019 	Operations 	Operations 	Operations 	Other 	Eliminations 	Consolidated
Net sales - disaggregated revenue
External 	$ 	1,838,682 $ 	230,086 $ 	245,914 $ 	77,330 	$ 	- 	$ 	2,392,012
External Non-U.S. 	83,845 	50,823 	165 	- 	- 	134,833
Other segments 	85,678 	293,999 	637 	100 	(380,414) 	-
2,008,205 	574,908 	246,716 	77,430 	(380,414) 	2,526,845
Operating income (loss) 	234,683 	(101) 	35,280 	(42,441)(1) 	624 	228,045
Income (loss) before income taxes 	217,699 	(1,159) 	34,080 	(49,780) 	411 (2) 	201,251
Depreciation and amortization 	63,170 	11,769 	2,941 	1,590 	- 	79,470
Capital expenditures 	40,818 	11,498 	3,759 	98,056 	- 	154,131
Footnotes related to the three months ended September 30, 2019, segment results (in millions):
(1) Corporate SG&A 	$ 	(15.4) 	(2) Gross profit increase from intra-company sales 	$ 	0.4
Company-wide equity-based compensation 	(8.7)
Profit sharing 	(17.0)
Other, net 	(1.3)
$ 	(42.4)
Metals 	Steel
For the nine months ended 	Steel 	Recycling 	Fabrication
September 30, 2020 	Operations 	Operations 	Operations 	Other 	Eliminations 	Consolidated
Net sales - disaggregated revenue
External 	$ 	5,072,959 $ 	563,685 $ 	677,326 $ 	334,791 	$ 	- 	$ 	6,648,761
External Non-U.S. 	193,305 	157,217 	398 	556 	- 	351,476
Other segments 	225,070 	960,998 	8,735 	150 	(1,194,953) 	-
5,491,334 	1,681,900 	686,459 	335,497 	(1,194,953) 	7,000,237
Operating income (loss) 	595,903 	9,481 	95,549 	(112,828)(1) 	287 	588,392
Income (loss) before income taxes 	551,392 	3,702 	92,251 	(162,169) 	(515)(2) 	484,661
Depreciation and amortization 	186,651 	36,510 	8,119 	9,452 	- 	240,732
Capital expenditures 	803,873 	27,718 	11,566 	11,741 	- 	854,898
Footnotes related to the nine months ended September 30, 2020, segment results (in millions):
(1) Corporate SG&A 	$ 	(45.9) 	(2) Gross profit decrease from intra-company sales 	$ 	(0.5)
Company-wide equity-based compensation 	(27.5)
Profit sharing 	(40.0)
Other, net 	0.6
$ 	(112.8)

-- 16 of 36 --

Table of Contents
STEEL DYNAMICS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)
15
Note 10. Segment Information (Continued)
Metals 	Steel
For the nine months ended 	Steel 	Recycling 	Fabrication
September 30, 2019 	Operations 	Operations 	Operations 	Other 	Eliminations 	Consolidated
Net sales - disaggregated revenue
External 	$ 	5,918,189 $ 	778,637 $ 	714,782 $ 	290,219 	$ 	- 	$ 	7,701,827
External Non-U.S. 	235,259 	176,508 	1,201 	- 	- 	412,968
Other segments 	243,107 	1,013,574 	826 	469 	(1,257,976) 	-
6,396,555 	1,968,719 	716,809 	290,688 	(1,257,976) 	8,114,795
Operating income (loss) 	835,172 	24,480 	86,567 	(148,514)(1) 	7,214 	804,919
Income (loss) before income taxes 	784,873 	20,846 	82,897 	(169,914) 	6,572 (2) 	725,274
Depreciation and amortization 	188,832 	34,733 	8,882 	8,108 	- 	240,555
Capital expenditures 	128,069 	30,313 	8,771 	126,534 	- 	293,687
Footnotes related to the nine months ended September 30, 2019, segment results (in millions):
(1) Corporate SG&A 	$ 	(56.0) 	(2) Gross profit increase from intra-company sales 	$ 	6.6
Company-wide equity-based compensation 	(26.1)
Profit sharing 	(61.3)
Other, net 	(5.1)
$ 	(148.5)

-- 17 of 36 --

Table of Contents
16
ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Forward-Looking Statements
This report contains some predictive statements about future events, including statements related to conditions in domestic or global economies,
conditions in steel and recycled metals market places, Steel Dynamics' revenues, costs of purchased materials, future profitability and earnings, and the
operation of new, existing or planned facilities. These statements, which we generally precede or accompany by such typical conditional words as
"anticipate", "intend", "believe", "estimate", "plan", "seek", "project", or "expect", or by the words "may", "will", or "should", are intended to be made as
"forward-looking", subject to many risks and uncertainties, within the safe harbor protections of the Private Securities Litigation Reform Act of 1995. These
statements speak only as of this date and are based upon information and assumptions, which we consider reasonable as of this date, concerning our
businesses and the environments in which they operate. Such predictive statements are not guarantees of future performance, and we undertake no duty to
update or revise any such statements. Some factors that could cause such forward-looking statements to turn out differently than anticipated include: (1) the
effects of uncertain economic conditions; (2) the effects of pandemics or other health issues, such as the recent novel coronavirus outbreak (COVID-19); (3)
cyclical and changing industrial demand; (4) changes in conditions in any of the steel or scrap-consuming sectors of the economy which affect demand for our
products, including the strength of the non-residential and residential construction, automotive, manufacturing, appliance, energy, and other steel-consuming
industries; (5) fluctuations in the cost of key raw materials and supplies (including steel scrap, iron units, zinc, graphite electrodes, and energy costs) and our
ability to pass on any cost increases; (6) the impact of domestic and foreign imports, including trade policy, restrictions, or agreements; (7) unanticipated
difficulties in integrating or starting up new, acquired or planned businesses or assets; (8) risks and uncertainties involving product and/or technology
development; and (9) occurrences of unexpected plant outages or equipment failures.
More specifically, we refer you to our more detailed explanation of these and other factors and risks that may cause such predictive statements to turn
out differently, as set forth in our most recent Annual Report on Form 10-K under the headings Special Note Regarding Forward-Looking Statements and
Risk Factors for the year ended December 31, 2019, in our quarterly reports on Form 10-Q, or in other reports which we from time to time file with the
Securities and Exchange Commission. These reports are available publicly on the Securities and Exchange Commission website, www.sec.gov, and on our
website, www.steeldynamics.com under "Investors – SEC Filings.”
Description of the Business
We are one of the largest domestic steel producers and metal recyclers in the United States based on current estimated annual steelmaking and coating
capability and actual metals recycling volumes, with one of the most diversified, high-margin steel product portfolios. Our primary sources of revenue are
from the manufacture and sale of steel products, the processing and sale of recycled ferrous and nonferrous metals, and the fabrication and sale of steel joists
and deck products. We have three reportable segments: steel operations, metals recycling operations, and steel fabrication operations.
Operating Statement Classifications
Net Sales. Net sales from our operations are a factor of volumes shipped, product mix and related pricing. We charge premium prices for certain grades
of steel, product dimensions, certain smaller volumes, and for value-added processing or coating of our steel products. Except for the steel fabrication
operations, we recognize revenues from sales and the allowance for estimated returns and claims from these sales at the point in time control of the product
transfers to the customer, upon shipment or delivery. Our steel fabrication operations recognize revenues over time based on completed fabricated tons to
date as a percentage of total tons required for each contract.
Costs of Goods Sold. Our costs of goods sold represent all direct and indirect costs associated with the manufacture of our products. The principal
elements of these costs are scrap and scrap substitutes (which represent the most significant single component of our consolidated costs of goods sold), steel
substrate, direct and indirect labor and related benefits, alloys, zinc, transportation and freight, repairs and maintenance, utilities such as electricity and natural
gas, and depreciation.
Selling, General and Administrative Expenses. Selling, general and administrative expenses consist of all costs associated with our sales, finance and
accounting, and administrative departments. These costs include, among other items, labor and related benefits, professional services, insurance premiums,
and property taxes. Company-wide profit sharing and amortization of intangible assets are each separately presented in the statement of income.
Interest Expense, net of Capitalized Interest. Interest expense consists of interest associated with our senior credit facilities and other debt net of
interest costs that are required to be capitalized during the construction period of certain capital investment projects.

-- 18 of 36 --

Table of Contents
17
Other (Income) Expense, net. Other income consists of interest income earned on our temporary cash deposits and short-term investments; any other
non-operating income activity, including income from non-consolidated investments accounted for under the equity method. Other expense consists of any
non-operating costs, such as certain acquisition and financing expenses.
Impact of COVID-19 on Our Business
In March 2020, the World Health Organization categorized the novel coronavirus (COVID-19) as a pandemic, and since that time, efforts to slow the
contagion have impacted global economies. Countries, including the United States, issued "shelter in place” orders, temporarily closing non-essential
businesses and restricting social interactions in an effort to slow the spread of COVID-19. States began to reopen during the second quarter 2020, and
domestic manufacturing improved.
Due to use of steel in the broad infrastructure and defense framework of the United States, our business operations are designated "essential” as part of
the critical infrastructure of the states where we operate. As a result, all of our locations continued to operate during the first nine months of 2020 and
continue to operate.
Our teams are our most valued priority, and we have implemented numerous additional process and procedural initiatives to ensure the health and safety
of our people, their families, and our communities. We have adjusted schedules to support social distancing, provided additional and more frequent sanitizing
applications, provided additional protective measures, and many other items.
While the continuing economic impact of COVID-19 negatively impacted our results of operations during the second and third quarters of 2020, we are
unable to specifically quantify that impact or predict the ultimate impact it may have on our business, financial condition, results of operations, or cash flow
for the remainder of the year. The extent to which our operations may continue to be impacted by COVID-19 will depend on future developments, which
are highly uncertain and cannot be accurately predicted, including the possibility of a resurgence or further spread of the virus. In addition, the duration of the
pandemic and its eventual impact on domestic and world economies is not known or estimable. The COVID-19 pandemic significantly reduced the supply of
scrap and the demand for some of our steel products during the second quarter 2020, with lingering effects on average selling prices impacting third quarter
2020 results. Certain of our suppliers and customers, such as those in the automotive, energy, and related industries, have experienced, and could further
experience, temporary shutdowns or significant demand reductions. Reduced demand for our products or lack of ferrous scrap raw material supply due to
shutdowns or slowdowns in manufacturing businesses could adversely affect our volumes, selling prices, and margins. However, our low, highly variable cost
structure, our diversified value-added product offerings, and our downstream manufacturing businesses which are able to provide base-load "pull-through”
volume for our steel operations, support our continued cash flow prospects.
Results Overview
Our consolidated results for the third quarter of 2020 were negatively impacted by the continuing COVID-19 pandemic, although the related temporary
closures of numerous domestic steel consuming businesses during the second quarter were largely reversed during the third quarter, as most industrial activity
resumed. Domestic steel demand rebounded meaningfully during the third quarter 2020 compared to the sequential second quarter, driving higher steel
shipments, as well as significantly higher scrap flows and profitability for our metals recycling operations. The non-residential construction market remained
strong, with construction activity largely intact during the quarter, resulting in record third quarter 2020 shipments and operating income for our fabrication
operations.
Consolidated operating income decreased $72.2 million, or 32%, to $155.9 million for the third quarter 2020, compared to the third quarter 2019. Third
quarter 2020 net income attributable to Steel Dynamics, Inc. decreased $50.9 million, or 34%, to $100.1 million, compared to the third quarter 2019,
consistent with the decreased operating income.
Consolidated operating income decreased $216.5 million, or 27%, to $588.4 million for the first nine months of 2020, compared to the first nine months
of 2019. First nine months 2020 net income attributable to Steel Dynamics, Inc. decreased $186.7 million, or 34%, to $363.0 million, compared to the first
nine months of 2019, consistent with the decreased operating income, and due to the additional expenses and interest associated with our June 2020
refinancing of senior notes.

-- 19 of 36 --

Table of Contents
18
Segment Operating Results 2020 vs. 2019 (dollars in thousands)
Three Months Ended September 30, 	Nine Months Ended September 30,
2020 	% Change 	2019 	2020 	% Change 	2019
Net sales:
Steel Operations Segment 	$ 1,775,784 	(12)% 	$ 2,008,205 	$ 	5,491,334 	(14)% 	$ 	6,396,555
Metals Recycling Operations Segment 	636,473 	11% 	574,908 	1,681,900 	(15)% 	1,968,719
Steel Fabrication Operations Segment 	246,590 	( - )% 	246,716 	686,459 	(4)% 	716,809
Other 	120,362 	55% 	77,430 	335,497 	15% 	290,688
2,779,209 	2,907,259 	8,195,190 	9,372,771
Intra-company 	(448,377) 	(380,414) 	(1,194,953) 	(1,257,976)
$ 2,330,832 	(8)% 	$ 2,526,845 	$ 	7,000,237 	(14)% 	$ 	8,114,795
Operating income (loss):
Steel Operations Segment 	$ 	139,466 	(41)% 	$ 	234,683 	$ 	595,903 	(29)% 	$ 	835,172
Metals Recycling Operations Segment 	12,668 	N/A 	(101) 	9,481 	(61)% 	24,480
Steel Fabrication Operations Segment 	39,231 	11% 	35,280 	95,549 	10% 	86,567
Other 	(34,384) 	19% 	(42,441) 	(112,828) 	24% 	(148,514)
156,981 	227,421 	588,105 	797,705
Intra-company 	(1,125) 	624 	287 	7,214
$ 	155,856 	(32)% 	$ 	228,045 	$ 	588,392 	(27)% 	$ 	804,919
Steel Operations Segment
Steel operations consist of our six electric arc furnace steel mills, producing sheet and long products steel from ferrous scrap and scrap substitutes,
utilizing continuous casting and automated rolling mills, with numerous value-added downstream processing and coating lines, as well as IDI, our liquid pig
iron production facility that solely supplies our Butler Flat Roll Division. Our steel operations sell a diverse portfolio of value-added sheet and long products
directly to end-users, steel fabricators, and service centers. These products are used in a wide variety of industries, including the construction, automotive,
manufacturing, transportation, heavy equipment, and agriculture, and energy markets. Steel operations accounted for 73% and 76% of our consolidated
external net sales during the third quarter of 2020 and 2019, respectively, and 75% and 76% during the first nine months of 2020 and 2019.
Steel Operations Segment Shipments (tons):
Three Months Ended September 30, 	Nine Months Ended September 30,
2020 	% Change 	2019 	2020 	% Change 	2019
Total shipments 	2,682,686 	(1)% 	2,711,909 	8,047,887 	(1)% 	8,165,678
Intra-segment shipments 	(244,185) 	(225,399) 	(754,881) 	(752,826)
Steel Operations Segment shipments 	2,438,501 	(2)% 	2,486,510 	7,293,006 	(2)% 	7,412,852
External shipments 	2,310,004 	(2)% 	2,362,915 	6,958,024 	(2)% 	7,096,975

-- 20 of 36 --

Table of Contents
19
Steel Operations Segment Results 2020 vs. 2019
The COVID-19 pandemic continued to negatively impact our steel operations during the third quarter of 2020. In spite of increased sequential quarterly
shipments driven by the reopening of numerous steel consuming businesses such as automotive manufacturers and their related supply chain, average selling
prices continued to decline, particularly for sheet steel products. Overall segment pricing continued to trend lower in the third quarter of 2020 compared to
the same period in 2019. Third quarter 2020 average selling prices decreased 9%, or $75 per ton, compared to third quarter 2019, reflecting the lag in price
recovery during the quarter compared to prior year. Steel operations segment shipments decreased only 2% in the third quarter 2020, as compared to the
same period in 2019, but increased 8% from second quarter 2020, which was adversely impacted by COVID-19 related steel consuming business closures.
Net sales for the steel operations decreased 12% in the third quarter 2020 when compared to the same period in 2019, due to the 9% decrease in average steel
selling prices and 2% decrease in shipments. Net sales for the steel operations decreased 14% in the first nine months of 2020 when compared to the same
period in 2019, due to the decrease in steel demand primarily due to the COVID-19 pandemic, negatively impacting both steel shipments (down 2%) and
average selling prices (down 12%), most notably in the second quarter of 2020.
Metallic raw materials used in our electric arc furnaces represent our single most significant steel manufacturing cost, generally comprising approximately
50 to 60% of our steel mill operations’ manufacturing costs. Our metallic raw material cost per net ton consumed in our steel operations decreased $16, or
6%, in the third quarter 2020, compared to the same period in 2019, consistent with overall decreased domestic scrap pricing. In the first nine months of
2020, our metallic raw material cost per ton decreased $45, or 15% compared to the same period in 2019.
As a result of average selling prices decreasing more than scrap costs, metal spread (which we define as the difference between average steel mill selling
prices and the cost of ferrous scrap consumed in our steel mills) decreased 11% in the third quarter 2020 compared to the third quarter 2019. Due to this
metal spread contraction, coupled with the slight decrease in shipments, operating income for the steel operations decreased 41%, to $139.5 million, in the
third quarter 2020, compared to the same period in 2019. First nine months 2020 operating income decreased 29%, to $595.9 million, compared to the first
nine months of 2019, due primarily to an 11% decrease in metal spreads, and to a lesser extent the 2% lower steel shipping volumes.

-- 21 of 36 --

Table of Contents
20
Metals Recycling Operations Segment
Metals recycling operations consist of our ferrous and nonferrous scrap metal processing, transportation, marketing, and brokerage services, strategically
located primarily in close proximity to our steel mills and other end-user scrap consumers throughout largely the eastern half of the United States, as well as
in Central and Northern Mexico. In addition, our metals recycling operations designs, installs, and manages customized scrap management programs for
industrial manufacturing companies at hundreds of locations throughout North America. Our steel mills utilize a large portion of the ferrous scrap sold by our
metals recycling operations as raw material in our steelmaking operations, and the remainder is sold to other consumers, such as other steel manufacturers and
foundries. In the third quarter 2020, 71% of the metals recycling operations ferrous scrap was sold to our own steel mills, as our steel mills were able to
maintain 85% utilization compared to 64% estimated domestic steel mill utilization. Our metals recycling operations accounted for 12% and 11% of our
consolidated external net sales during the third quarter of 2020 and 2019, respectively, and 10% and 12% during the first nine months of 2020 and 2019,
respectively.
Metals Recycling Operations Segment Shipments:
Three Months Ended September 30, 	Nine Months Ended September 30,
2020 	% Change 	2019 	2020 	% Change 	2019
Ferrous metal (gross tons)
Total 	1,256,351 	7% 	1,169,963 	3,250,565 	(8)% 	3,531,003
Inter-company 	(886,775) 	15% 	(773,828) 	(2,289,368) 	(2)% 	(2,326,550)
External shipments 	369,576 	(7)% 	396,135 	961,197 	(20)% 	1,204,453
Nonferrous metals (thousands of pounds)
Total 	267,338 	4% 	257,087 	706,330 	(13)% 	815,347
Inter-company 	(42,026) 	(31,419) 	(122,244) 	(105,198)
External shipments 	225,312 	( - )% 	225,668 	584,086 	(18)% 	710,149
Metals Recycling Operations Segment Results 2020 vs. 2019
Our metals recycling operations benefitted from a rebound in manufacturing activity during the third quarter of 2020 compared to the second quarter of
2020, which was severely impacted by the COVID-19 pandemic. Scrap flows increased as temporary closures of domestic automotive manufacturers and
their related supply chain were lifted. In addition, domestic steel mill utilization rates rose from the trough experienced in the sequential second quarter,
resulting in increased ferrous scrap demand. Net sales increased 11% during the third quarter of 2020 compared to the same period in 2019, driven by
increased shipments and higher average selling prices. Ferrous scrap average selling prices increased 13% during the third quarter 2020 compared to the same
period in 2019, while average nonferrous scrap prices increased 6%. Ferrous metal spread (which we define as the difference between average selling prices
and the cost of purchased scrap) increased 26%, while nonferrous metal spread increased 4% during the third quarter 2020 compared to the same period in
2019. This resulted in metals recycling operations operating income increasing to $12.7 million in the third quarter 2020 compared to the third quarter 2019
operating loss of $101,000.
Net sales for our metals recycling operations decreased 15% in the first nine months of 2020 as compared to the same period in 2019, driven by
decreased shipments in conjunction with slowdowns in industrial activity due to the COVID-19 pandemic, most notably in the second quarter. Ferrous and
nonferrous scrap average selling prices were flat during the first nine months of 2020 compared to the same period in 2019. Nonferrous metal spread
decreased 15%, while ferrous metal spread increased 15% in the first nine months of 2020 compared to the same period in 2019. Metals recycling operations
operating income in the first nine months of 2020 decreased 61% to $9.5 million from the first nine months of 2019 operating income of $24.5 million, due
primarily to decreased ferrous and nonferrous shipments, mostly in the second quarter 2020.

-- 22 of 36 --

Table of Contents
21
Steel Fabrication Operations Segment
Steel fabrication operations include our joist and deck plants located throughout the United States and in Northern Mexico. Revenues from these plants
are generated from the fabrication of steel joists, trusses, girders and steel deck used within the non-residential construction industry. Steel fabrication
operations accounted for 10% of our consolidated external net sales during the third quarter of 2020 and 2019, and 10% and 9% during the first nine months
of 2020 and 2019, respectively.
Steel Fabrication Operations Segment Results 2020 vs. 2019
Net sales for the steel fabrication operations were flat during the third quarter 2020 compared to the same period in 2019, as average selling prices
decreased 6%, or $89 per ton, while shipments increased 6% to a quarterly record 179,000 tons. Net sales for the segment decreased 4% during the first nine
months of 2020, compared to the same period in 2019, as shipments increased 7%, and average selling prices decreased 10%, or $158 per ton. Our steel
fabrication operations continue to leverage our national operating footprint. Market demand, orders and backlog continued to be strong in the third quarter
2020, indicating resilience of the non-residential construction market during the COVID-19 pandemic.
The purchase of various steel products is the largest single cost of production for our steel fabrication operations, generally representing approximately
two-thirds of the total cost of manufacturing. The average cost of steel consumed decreased 11% in the third quarter 2020, as compared to the same period in
2019. As a result of steel costs decreasing slightly less than selling prices per ton, metal spread (which we define as the difference between average selling
prices and the cost of purchased steel) decreased only 1% in the third quarter 2020 compared to the same period in 2019. Operating income increased 11% to
a record $39.2 million in the third quarter 2020 compared to the same period in 2019 on increased shipments. For the first nine months of 2020, operating
income increased 10% to $95.5 million compared to the first nine months of 2019, as increased shipments more than offset a 2% decrease in metal spread.

-- 23 of 36 --

Table of Contents
22
Other Operations
Third Quarter Consolidated Results 2020 vs. 2019
Selling, General and Administrative Expenses. Selling, general and administrative expenses of $118.2 million during the third quarter 2020 increased
10% from the $107.2 million during the third quarter 2019, representing 5% and 4% of net sales during each period, respectively. This increase relates
primarily to non-capitalized expenses incurred during construction of our new flat roll steel mill. Profit sharing expense during the third quarter of 2020 of
$11.8 million was down 34% from the $17.8 million during the same period in 2019. The company-wide profit sharing plan represents 8% of pretax earnings;
therefore, our lower third quarter 2020 earnings resulted in lower profit sharing.
Interest Expense, net of Capitalized Interest. During the third quarter 2020, interest expense of $19.0 million decreased 40% from $31.3 million during
the third quarter of 2019, due to decreased interest rates from our December 2019 and June 2020 refinancing of $1.6 billion of high yield senior notes, and
increased capitalized interest in 2020 in conjunction with our new flat roll steel mill currently under construction in Sinton, Texas.
Income Tax Expense. Third quarter 2020 income tax expense of $29.1 million, at an effective income tax rate of 21.8%, was down 40% from the $48.6
million, at an effective income tax rate of 24.2%, during the third quarter 2019, consistent with decreased income before income taxes.
First Nine Months Consolidated Results 2020 vs. 2019
Selling, General and Administrative Expenses. Selling, general and administrative expenses of $340.4 million during the first nine months of 2020 were
up 5% from the $324.5 million during the first nine months of 2019, representing 5% and 4% of net sales, respectively. This increase relates primarily to
non-capitalized expenses incurred during construction of our new flat roll steel mill. Profit sharing expense during the first nine months of 2020 of $42.3
million decreased 34% from the $64.4 million during the same period in 2019. The company-wide profit sharing plan represents 8% of pretax earnings;
therefore, our lower first nine months 2020 earnings resulted in lower profit sharing.
Interest Expense, net of Capitalized Interest. During the first nine months of 2020, interest expense of $74.7 million decreased 21% from $94.8 million
during the first nine months of 2019 due to decreased interest rates from our December 2019 and June 2020 refinancing of $1.6 billion of high yield senior
notes, and increased capitalized interest in 2020 in conjunction with our new electric arc furnace flat roll steel mill currently under construction in Sinton,
Texas.
Income Tax Expense. First nine months 2020 income tax expense of $110.8 million, at an effective income tax rate of 22.9%, was down 35% from the
$171.1 million, at an effective income tax rate of 23.6%, during the first nine months of 2019, consistent with decreased income before income taxes.
Liquidity and Capital Resources
Capital Resources and Long-term Debt. Our business is capital intensive and requires substantial expenditures for, among other things, the purchase and
maintenance of equipment used in our steel, metals recycling, and steel fabrication operations, and to remain in compliance with environmental laws. Our
short-term and long-term liquidity needs arise primarily from working capital requirements, capital expenditures, currently including those related to our flat
roll steel mill under construction in Sinton, Texas, principal and interest payments related to our outstanding indebtedness (no significant principal payments
until 2024), dividends to our shareholders, potential stock repurchases, and acquisitions. We have met these liquidity requirements primarily with cash
provided by operations and long-term borrowings, and we also have availability under our unsecured Revolver. Our liquidity at September 30, 2020, is as
follows (in thousands):
Cash and equivalents 	$ 1,267,618
Revolver availability 	1,187,940
Total liquidity 	$ 2,455,558
Our total outstanding debt decreased $15.5 million during the first nine months of 2020, primarily due to lower revolving debt at two of our consolidated
joint ventures. Our total long-term debt to capitalization ratio (representing our long-term debt, including current maturities, divided by the sum of our long-
term debt, redeemable noncontrolling interests, and our total stockholders’ equity) was 39.3% and 40.2% at September 30, 2020, and December 31, 2019,
respectively.

-- 24 of 36 --

Table of Contents
23
In October 2020, we issued $350.0 million of 1.650% notes due 2027 and $400.0 million of 3.250% notes due 2050. The net proceeds from these notes
will be used to fund the November 2020 call and redemption of the $350.0 million outstanding principal amount of our 4.125% senior notes due 2025 at a
redemption price of 102.063%, plus accrued and unpaid interest to, but not including, the date of redemption, and for general corporate purposes. We will
record expenses related to premiums and write off of unamortized debt issuance costs of approximately $10.3 million in other expenses in the fourth quarter
of 2020.
In June 2020, we issued $400.0 million of 2.400% notes due 2025 and $500.0 million of 3.250% notes due 2031. The net proceeds from these notes
were used to fund the June 2020 call and redemption of the $400.0 million outstanding principal amount of the company’s 5.250% senior notes due 2023 and
the $500.0 million outstanding principal amount of the company’s 5.500% senior notes due 2024. We recorded expenses related to premiums, write off of
unamortized debt issuance costs, and other expenses of approximately $22.8 million, which are reflected in other expenses in the consolidated statements of
income for the second quarter and first nine months 2020.
Our unsecured credit agreement has a senior unsecured revolving credit facility (Facility), which provides a $1.2 billion unsecured Revolver, and matures
in December 2024. Subject to certain conditions, we have the opportunity to increase the Facility size by $500.0 million. The unsecured Revolver is available
to fund working capital, capital expenditures, and other general corporate purposes. The Facility contains financial covenants and other covenants pertaining
to our ability to incur indebtedness and permit liens on property. Our ability to borrow funds within the terms of the unsecured Revolver is dependent upon
our continued compliance with the financial and other covenants. At September 30, 2020, we had $1.2 billion of availability on the Revolver, $12.1 million of
outstanding letters of credit and other obligations which reduce availability, and there were no borrowings outstanding.
The financial covenants under our Facility state that we must maintain an interest coverage ratio of not less than 2.50:1.00. Our interest coverage ratio is
calculated by dividing our last-twelve-months (LTM) consolidated adjusted EBITDA (earnings before interest, taxes, depreciation, amortization, and certain
other non-cash transactions as allowed in the Facility) by our LTM gross interest expense, less amortization of financing fees. In addition, a debt to
capitalization ratio of not more than 0.60:1.00 must be maintained. At September 30, 2020, our interest coverage ratio and debt to capitalization ratio were
9.22:1.00 and 0.39:1.00, respectively. We were, therefore, in compliance with these covenants at September 30, 2020, and we anticipate we will continue to
be in compliance during the next twelve months.
Working Capital. We generated cash flow from operations of $849.1 million in the first nine months of 2020 compared to $987.2 million in the
comparable 2019 period. Operational working capital (representing amounts invested in trade receivables and inventories, less current liabilities other than
income taxes payable and debt) decreased $182.1 million (21%), to $1.4 billion at September 30, 2020, due primarily to decreased inventory and increased
accounts payable, generating operating cash flows during the first nine months of 2020.
Capital Investments. During the first nine months of 2020, we invested $854.9 million in property, plant and equipment, primarily within our steel
operations segment, compared with $293.7 million invested during the same period in 2019. The increase in the first nine months of 2020 versus the same
period in 2019 relates to our new flat roll steel mill under construction in Sinton, Texas. We entered 2020 with sufficient liquidity of $2.8 billion to provide
for our planned 2020 capital requirements, including those necessary to construct the Sinton steel mill. For the fourth quarter of 2020, we are planning for
capital investments to be roughly $400 million, of which the new flat roll steel mill in Sinton, Texas, represents approximately $360 million.
Cash Dividends. As a reflection of continued confidence in our current and future cash flow generation ability and financial position, we increased our
quarterly cash dividend by 4% to $0.25 per share in the first quarter 2020 (from $0.24 per share in 2019), resulting in declared cash dividends of $157.8
million during the first nine months of 2020, compared to $158.0 million during the same period in 2019. The slight decrease in declared cash dividends period
over period, after the 4% increase in dividend per share, was due to stock repurchases which took place throughout 2019 and into the first quarter of 2020,
reducing our common stock shares outstanding. We paid cash dividends of $156.7 million and $148.5 million during the first nine months of 2020 and 2019,
respectively. Our board of directors, along with executive management, approves the payment of dividends on a quarterly basis. The determination to pay
cash dividends in the future is at the discretion of our board of directors, after taking into account various factors, including our financial condition, results of
operations, outstanding indebtedness, current and anticipated cash needs and growth plans.

-- 25 of 36 --

Table of Contents
24
Other. In August 2018, our board of directors authorized a share repurchase program of up to $750 million of our common stock. In February 2020, our
board authorized an additional share repurchase program of up to $500 million. Under the share repurchase programs, purchases will take place, as and when,
we determine in open market or private transactions made based upon the market price of our common stock, the nature of other investment opportunities or
growth projects, our cash flows from operations, and general economic conditions. The share repurchase programs do not require us to acquire any specific
number of shares, and may be modified, suspended, extended or terminated by us at any time. We acquired 4.4 million shares of our common stock for $106.5
million in the first nine months of 2020, all within the first quarter, fully expending the remaining purchases available under the 2018 program, leaving $444.0
million remaining available to purchase under the 2020 program.
Our ability to meet our debt service obligations and reduce our total debt will depend upon our future performance which, in turn, will depend upon
general economic, financial, business and the ongoing COVID-19 pandemic conditions, along with competition, legislation and regulatory factors that are
largely beyond our control. In addition, we cannot assure that our operating results, cash flows, access to credit markets and capital resources will be
sufficient for repayment of our indebtedness in the future. We believe that based upon current levels of operations and anticipated growth, cash flows from
operations, together with other available sources of funds, including borrowings under our Revolver, if necessary, will be adequate for the next twelve months
for making required payments of principal and interest on our indebtedness, funding working capital requirements, and anticipated capital expenditures noted
above.
ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Commodity Risk
In the normal course of business, we are exposed to the market risk and price fluctuations related to the sale of our products and to the purchase of raw
materials used in our operations, such as metallic raw materials, electricity, natural gas and its transportation services, fuel, air products, zinc, and electrodes.
Our risk strategy associated with product sales has generally been to obtain competitive prices for our products and to allow operating results to reflect
market price movements dictated by supply and demand.
Our risk strategy associated with the purchase of raw materials utilized within our operations has generally been to make some commitments with
suppliers relating to future expected requirements for some commodities such as electricity, water, natural gas and its transportation services, fuel, air
products, zinc, and electrodes. Certain of these commitments contain provisions which require us to "take or pay” for specified quantities without regard to
actual usage for periods of generally up to 5 years for physical commodity requirements and commodity transportation requirements, with some extending
beyond, and for up to 13 remaining years for air products. We utilized such "take or pay” requirements during the past three years under these contracts,
except for certain air products at our idle Minnesota ironmaking operations. We believe that production requirements will be such that consumption of the
products or services purchased under these commitments will occur in the normal production process, other than certain air products related to our
Minnesota ironmaking operations while idle. We also purchase electricity consumed at our Butler Flat Roll Division pursuant to a contract which extends
through December 2022, which establishes an agreed fixed-rate energy charge per Mill/kWh consumed for each year through the expiration of the agreement.
In our metals recycling and steel operations, we have certain fixed price contracts with various customers and suppliers for future delivery of nonferrous
and ferrous metals. Our risk strategy has been to enter into base metal financial contracts with the goal to protect the profit margin, within certain parameters,
that was contemplated when we entered into the transaction with the customer or vendor. At September 30, 2020, we had a cumulative unrealized loss
associated with these financial contracts of $1.5 million, substantially all of which have a settlement date within the next twelve months. We believe the
customer contracts associated with the financial contracts will be fully consummated.

-- 26 of 36 --

Table of Contents
25
ITEM 4. CONTROLS AND PROCEDURES
(a) Evaluation of Disclosure Controls and Procedures
As required, we carried out an evaluation, under the supervision and with the participation of our principal executive officer and principal
financial officer, of the effectiveness of our disclosure controls and procedures, as defined in rules 13a-15(e) and 15d-15(e) under the Securities
Exchange Act of 1934, as amended (the Exchange Act). Based on this evaluation, our principal executive officer and principal financial officer
concluded that, as of September 30, 2020, the end of the period covered by this quarterly report, our disclosure controls and procedures were
designed to provide and were effective to provide reasonable assurance that the information required to be disclosed by us in the reports we file or
submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the applicable rules and forms,
and that it is accumulated and communicated to our management, including our principal executive and principal financial officers, as appropriate to
allow timely decisions regarding required disclosure.
(b) Changes in Internal Controls Over Financial Reporting
No changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) occurred
during the fiscal quarter ended September 30, 2020, that has materially affected, or is reasonably likely to materially affect, our internal control over
financial reporting.

-- 27 of 36 --

Table of Contents
26
PART II OTHER INFORMATION
ITEM 1. LEGAL PROCEEDINGS
We are involved in various litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental
matters, and commercial and construction contract disputes, none of which are expected to have a material impact on our financial condition, results of
operations, or liquidity.
We may also be involved from time to time in various governmental investigations, regulatory proceedings or judicial actions seeking penalties, injunctive
relief, and/or remediation under federal, state and local environmental laws and regulations. The United States EPA has conducted such investigations and
proceedings involving us, in some instances along with state environmental regulators, under various environmental laws, including RCRA, CERCLA, the
Clean Water Act and the Clean Air Act. Some of these matters have resulted in fines or penalties, for which a total of $485,000 is recorded in our financial
statements as of September 30, 2020.
ITEM 1A. RISK FACTORS
Except as stated below, no material changes have occurred to the indicated risk factors as disclosed in our Annual Report on Form 10-K for the year
ended December 31, 2019. Additionally, the impact of the COVID-19 pandemic could also exacerbate other risks discussed in the Risk Factors section of our
Annual Report on Form 10-K for the year ended December 31, 2019.
Pandemics, epidemics, widespread illness or other health issues, such as the recent novel coronavirus outbreak (COVID-19) may adversely affect our
business, results of operations, financial condition, cash flows, liquidity, and stock price.
The COVID-19 pandemic has and may continue to adversely affect our business, results of operations, financial condition, cash flows, liquidity and
stock price. Other pandemics, epidemics, widespread illness or other health issues could also adversely affect us. The COVID-19 pandemic has resulted in
various government actions globally, including United States federal and state governmental actions designed to slow the spread of the virus and its impacts.
These actions have included quarantines, "shelter in place,” "stay at home” and "social distancing” orders, business shutdowns or restrictions, travel
restrictions and other mitigation efforts, which, among other things, have impacted and may further impact demand for our products, as well as our supply
chain. These measures, along with further voluntary measures by businesses and individuals, have impacted and may further impact our working conditions,
productivity and operations, as well as those of our customers, suppliers, vendors and business partners. These mitigation measures have also adversely
affected and may continue to adversely affect the United States and world economies, resulting in increased unemployment in the United States and the
communities in which we operate. However, due to our variable compensation system that rewards productivity, as well as our low fixed cost structure, we
have not and do not expect in the future to significantly reduce our workforce due to the COVID-19 pandemic.
We have been identified by governmental authorities as a critical infrastructure industry and have been deemed an essential business in all of the states in
which we operate. This has permitted us to continue to advance our commitment to our customers and meet their demand by operating our business
consistent with federal guidelines and state and local orders, including social distancing guidelines. Our teams are our most valued priority, and we have
implemented numerous process and procedural initiatives to ensure the health and safety of our people, their families and our communities. We have adjusted
schedules to support social distancing, provided additional and more frequent sanitizing applications, provided additional protective measures, and many
other items. These health and safety initiatives have not and are not expected to have a material effect on our operations, but further required limitations and
restrictions could adversely affect our results of operations.
Additionally, while we have not currently curtailed our operations, a prolonged COVID-19 pandemic or resurgence or further spread of the virus could
further materially reduce demand for our products and thus, reduce the productivity of our operations and have a negative impact on our business, results of
operations, financial condition and cash flows. Certain of our suppliers and customers, such as those in the automotive, energy and related industries, have
experienced temporary shutdowns or significant demand reductions, adversely affecting our operations. Further reduced demand for our products or raw
material supply availability due to shutdowns or slowdowns in businesses could further adversely affect our volumes and margins, results of operations,
financial condition and cash flows. Prolonged shutdowns of critical equipment suppliers, or their suppliers, to our planned capital improvements, including
our under construction Sinton, Texas Flat Roll Steel Mill expected to commence operations mid-year 2021, could, if they were to occur, cause our planned
expansions to be delayed. The COVID-19 pandemic has also caused volatility in the financial and capital markets, which has adversely affected our stock
price and may adversely affect our ability to access and the costs associated with accessing the debt or equity capital markets, which could adversely affect
our liquidity, which as of September 30, 2020 was approximately $2.5 billion, consisting of approximately $1.3 billion in cash and cash equivalents and $1.2
billion in availability under our undrawn credit facility.

-- 28 of 36 --

Table of Contents
27
There is considerable uncertainty regarding the economic and industry impacts, including duration, from the COVID-19 pandemic and the measures
introduced to curtail its spread and its impacts. Although these highly uncertain future impacts cannot be reasonably estimated at this time, general economic
conditions, business closures, slow payments from customers, increased bankruptcies, and labor restrictions may adversely affect our business, results of
operations, financial condition, cash flows, liquidity and stock price. Additionally, the impact of the COVID-19 pandemic could also exacerbate other risks
to us, including those discussed in the Risk Factors section of our Annual Report on Form 10-K for the year ended December 31, 2019.
ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS
None.
ITEM 3. DEFAULTS UPON SENIOR SECURITIES
None.
ITEM 4. MINE SAFETY DISCLOSURES
None.
ITEM 5. OTHER INFORMATION
None.

-- 29 of 36 --

Table of Contents
28
ITEM 6. EXHIBITS
Reference is made to the Exhibit Index preceding the signature page hereto, which Exhibit Index is hereby incorporated into this item.
EXHIBIT INDEX
Articles of Incorporation
3.1 	Amended and Restated Articles of Incorporation of Steel Dynamics, Inc., reflecting all amendments thereto through May 17, 2018,
incorporated herein by reference from Exhibit 3.1e to our Form 10-Q filed August 9, 2018.
3.2 	Amended and Restated Bylaws of Steel Dynamics, Inc., reflecting all amendments thereto through October 17, 2018, incorporated herein
by reference from Exhibit 3.2d to our Form 10-Q filed November 7, 2018.
Executive Officer Certifications
31.1* 	Certification of Chief Executive Officer required by Item 307 of Regulation S-K as promulgated by the Securities and Exchange
Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2* 	Certification of Chief Financial Officer required by Item 307 of Regulation S-K as promulgated by the Securities and Exchange
Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1* 	Certification of Chief Executive Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906
of the Sarbanes-Oxley Act of 2002.
32.2* 	Certification of Chief Financial Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley
Act of 2002.
Instruments Defining the Rights of Security Holders, Including Indentures
4.38 	Third Supplemental Indenture, dated as of October 9, 2020, relating to our issuance of $350 million 1.650% Notes due 2027, and $400
million 3.250% Notes due 2050, between Steel Dynamics, Inc. and Wells Fargo Bank, National Association, as Trustee, incorporated
herein by reference from Exhibit 4.2 to our Form 8-K filed October 9, 2020.
4.39 	Form of 1.650% Notes due 2027 (included in Exhibit 4.38), incorporated herein by reference from Exhibit 4.3 to our Form 8-K filed
October 9, 2020.
4.40 	Form of 3.250% Notes due 2050 (included in Exhibit 4.38), incorporated herein by reference from Exhibit 4.4 to our Form 8-K filed
October 9, 2020.
XBRL Documents
101.INS* 	XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded
within the Inline XBRL document.
101.SCH* 	XBRL Taxonomy Extension Schema Document
101.CAL* 	XBRL Taxonomy Extension Calculation Document
101.DEF* 	XBRL Taxonomy Definition Document
101.LAB* 	XBRL Taxonomy Extension Label Document
101.PRE* 	XBRL Taxonomy Presentation Document
104 	Cover Page Interactive Data File – the cover page interactive data file does not appear in the Interactive Data File because its XBRL tags
are embedded within the Inline XBRL document.
* Filed concurrently herewith

-- 30 of 36 --

Table of Contents
29
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the
undersigned, thereunto duly authorized.
November 9, 2020
STEEL DYNAMICS, INC.
By: /s/ Theresa E. Wagler
Theresa E. Wagler
Executive Vice President and Chief Financial Officer
(Principal Financial Officer and Principal Accounting Officer)

-- 31 of 36 --

EXHIBIT 31.1
CERTIFICATION PURSUANT TO SECTION 302 OF THE
SARBANES-OXLEY ACT OF 2002
I, Mark D. Millett, certify that:
1. I have reviewed this quarterly report for the period ended September 30, 2020, on Form 10-Q of Steel Dynamics, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in
light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report.
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition,
results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-
15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material
information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in
which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide
reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally
accepted accounting principles;
(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the
disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the
registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal
control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and
the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely
affect the registrant’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial
reporting.
/s/ Mark D. Millett
Mark D. Millett
Chief Executive Officer
(Principal Executive Officer)
November 9, 2020

-- 32 of 36 --

EXHIBIT 31.2
CERTIFICATION PURSUANT TO SECTION 302 OF THE
SARBANES-OXLEY ACT OF 2002
I, Theresa E. Wagler, certify that:
1. I have reviewed this quarterly report for the period ended September 30, 2020, on Form 10-Q of Steel Dynamics, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in
light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report.
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition,
results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-
15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material
information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in
which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide
reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally
accepted accounting principles;
(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the
disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the
registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal
control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and
the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely
affect the registrant’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial
reporting.
/s/ Theresa E. Wagler
Theresa E. Wagler
Executive Vice President and Chief Financial Officer
(Principal Financial Officer and Principal Accounting Officer)
November 9, 2020

-- 33 of 36 --

EXHIBIT 32.1
Chief Executive Officer Certification
Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to
Section 906 of the Sarbanes-Oxley Act of 2002
In connection with the Quarterly Report of Steel Dynamics, Inc. (the "Company”) on Form 10-Q for the period ended September 30, 2020 (the "Report”), as filed with
the Securities and Exchange Commission on the date hereof, I, Mark D. Millett, Chief Executive Officer of Steel Dynamics, Inc., certify, pursuant to 18 U.S.C. § 1350, as
adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
1. The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
2. The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
/s/ Mark D. Millett
Mark D. Millett
Chief Executive Officer
(Principal Executive Officer)
November 9, 2020
A signed original of this written statement required by Section 906 has been provided to Steel Dynamics, Inc. and will be retained by Steel Dynamics, Inc. and furnished
to the Securities and Exchange Commission or its staff upon request.

-- 34 of 36 --

EXHIBIT 32.2
Chief Financial Officer Certification
Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to
Section 906 of the Sarbanes-Oxley Act of 2002
In connection with the Quarterly Report of Steel Dynamics, Inc. (the "Company”) on Form 10-Q for the period ended September 30, 2020 (the "Report”), as filed with
the Securities and Exchange Commission on the date hereof, I, Theresa E. Wagler, Executive Vice President and Chief Financial Officer of Steel Dynamics, Inc., certify,
pursuant to 18 U.S.C. § 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
1. The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
2. The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
/s/ Theresa E. Wagler
Theresa E. Wagler
Executive Vice President and Chief Financial Officer
(Principal Financial Officer and Principal Accounting Officer)
November 9, 2020
A signed original of this written statement required by Section 906 has been provided to Steel Dynamics, Inc. and will be retained by Steel Dynamics, Inc. and furnished
to the Securities and Exchange Commission or its staff upon request.

-- 35 of 36 --



-- 36 of 36 --